[Linux 3.1.0-1-686-pae & gma500] On boot, switches on video mode not supported

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear Mr. Cox,

Following the report of bug 649847 [1] on the debian
linux-image-3.1.0-1-686-pae, Jonathan Nieder has asked me to raise the problem
that I encounter.

I use the Linux kernel currently provided by the linux-image-2.6.39-2-686-pae
and I just installed version of the package li nux-image-3.1.0-1-686-pae. I
use an LCD Hyundai ImageQuest L50S mode 1024x768 and the video controller is a
GMA500 integrate d on a motherboard Intel Poulsbo XL.

When I boot the kernel version 3.1.0, after switching to runlevel S, the
screen goes black and the monitor displays a build- in message: video mode not
supported. The kernel 2.6.39 has worked well in this view.

I added the options GRUB_GFXPAYLOAD_LINUX="keep" and GRUB_GFXMODE=1024x768x16 to
grub configuration file (/ etc / defaul t / grub) to try to force the video mode
without success.

Jonathan thinks is missing a patch for the detection mode.

Regards,

[1] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=649867

-- File /etc/default/grub

GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_GFXPAYLOAD_LINUX="keep"
GRUB_GFXMODE=1024x768x16


-- Specifications

Motherboard
  Model                     eBox 6620
  Chipset                   Intel Poulsbo XL
  CPU / Socket              Intel Atom Z510 1,1 GHz
  BUS Frequency             533 MHz

Memory
  Type                      DDR2 integrated (1 Go)
  Number of slots           0
  Max. memory               1 Go

Graphics
  Graphics chipset          GMA500 HD H/W video decode
  Graphics memory           256 Mo shared
  Max. resolution           1920 x 1080
  VGA                       1
  S-video                   1

Audio
  Type                      ALC888 HD Audio
  Connectors                Mic-in / Line-out front

Other connectors
  LAN                       1 x 10/100/1000 Realtek LAN
  USB                       4 x USB 2.0 (2 front)
  PS/2                      1

Storage
  SATA                      1 (for hard-disc 1.8")
  Compact Flash             Compact Flash card type II for ATA interface

-- 
Stéphane Aulery
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.39-2-686-pae (Debian 2.6.39-3) (ben@xxxxxxxxxxxxxxx) (gcc version 4.4.6 (Debian 4.4.6-6) ) #1 SMP Tue Jul 5 03:48:49 UTC 2011
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[    0.000000]  BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003f680000 (usable)
[    0.000000]  BIOS-e820: 000000003f680000 - 000000003f690000 (reserved)
[    0.000000]  BIOS-e820: 000000003f690000 - 000000003f69e000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003f69e000 - 000000003f6d0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003f6d0000 - 000000003f6e0000 (reserved)
[    0.000000]  BIOS-e820: 000000003f6e8000 - 000000003f800000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080015  11/19/2009
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x3f680 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 0C0000000 write-back
[    0.000000]   1 base 03F700000 mask 0FFF00000 uncachable
[    0.000000]   2 base 03F800000 mask 0FF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [c00ff780] ff780
[    0.000000] initial memory mapped : 0 - 01a00000
[    0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037800000 page 2M
[    0.000000]  0037800000 - 00379fe000 page 4k
[    0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[    0.000000] RAMDISK: 36e66000 - 3772b000
[    0.000000] ACPI: RSDP 000f9080 00024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 3f690100 0005C (v01 111909 XSDT1533 20091119 MSFT 00000097)
[    0.000000] ACPI: FACP 3f690290 000F4 (v04 111909 FACP1533 20091119 MSFT 00000097)
[    0.000000] ACPI: DSDT 3f690430 03D87 (v02  7652I 7652I102 00000102 INTL 20051117)
[    0.000000] ACPI: FACS 3f69e000 00040
[    0.000000] ACPI: APIC 3f690390 0005C (v02 111909 APIC1533 20091119 MSFT 00000097)
[    0.000000] ACPI: MCFG 3f6903f0 0003C (v01 111909 OEMMCFG  20091119 MSFT 00000097)
[    0.000000] ACPI: OEMB 3f69e040 0012C (v01 111909 OEMB1533 20091119 MSFT 00000097)
[    0.000000] ACPI: HPET 3f6941c0 00038 (v01 111909 OEMHPET  20091119 MSFT 00000097)
[    0.000000] ACPI: GSCI 3f69e170 02024 (v01 111909 GMCHSCI  20091119 MSFT 00000097)
[    0.000000] ACPI: SSDT 3f6a0470 004F0 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 124MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000379fe
[    0.000000]   HighMem  0x000379fe -> 0x0003f680
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x0003f680
[    0.000000] On node 0 totalpages: 259597
[    0.000000] free_area_init_node: node 0, pgdat c14187c0, node_mem_map f6676200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3949 pages, LIFO batch:0
[    0.000000]   Normal zone: 1748 pages used for memmap
[    0.000000]   Normal zone: 221994 pages, LIFO batch:31
[    0.000000]   HighMem zone: 250 pages used for memmap
[    0.000000]   HighMem zone: 31624 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x908
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 3f800000 (gap: 3f800000:bf600000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f6400000 s30976 r0 d22272 u1048576
[    0.000000] pcpu-alloc: s30976 r0 d22272 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257567
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-2-686-pae root=UUID=fea5336a-726d-4e2c-a0cc-61b633ddcbaa ro drm.debug=0x86
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:0003f680)
[    0.000000] Memory: 1015040k/1038848k available (2784k kernel code, 23348k reserved, 1435k data, 440k init, 127496k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
[    0.000000]     vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
[    0.000000]       .init : 0xc1420000 - 0xc148e000   ( 440 kB)
[    0.000000]       .data : 0xc12b8340 - 0xc141f240   (1435 kB)
[    0.000000]       .text : 0xc1000000 - 0xc12b8340   (2784 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
[    0.000000] NR_IRQS:1280
[    0.000000] CPU 0 irqstacks, hard=f600a000 soft=f600c000
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration failed
[    0.000000] TSC: PIT calibration matches HPET. 1 loops
[    0.000000] Detected 1097.245 MHz processor.
[    0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 2194.49 BogoMIPS (lpj=4388980)
[    0.004221] pid_max: default: 32768 minimum: 301
[    0.004494] Security Framework initialized
[    0.004601] SELinux:  Disabled at boot.
[    0.004768] Mount-cache hash table entries: 512
[    0.005648] Initializing cgroup subsys ns
[    0.005753] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.005897] Initializing cgroup subsys cpuacct
[    0.006065] Initializing cgroup subsys memory
[    0.006201] Initializing cgroup subsys devices
[    0.006303] Initializing cgroup subsys freezer
[    0.006407] Initializing cgroup subsys net_cls
[    0.006509] Initializing cgroup subsys blkio
[    0.006687] CPU: Physical Processor ID: 0
[    0.006788] CPU: Processor Core ID: 0
[    0.006888] mce: CPU supports 5 MCE banks
[    0.007012] CPU0: Thermal monitoring enabled (TM1)
[    0.007116] using mwait in idle threads.
[    0.010197] ACPI: Core revision 20110316
[    0.020192] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.020705] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.062989] CPU0: Intel(R) Atom(TM) CPU Z510   @ 1.10GHz stepping 02
[    0.064003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[    0.064003] ... version:                3
[    0.064003] ... bit width:              40
[    0.064003] ... generic registers:      2
[    0.064003] ... value mask:             000000ffffffffff
[    0.064003] ... max period:             000000007fffffff
[    0.064003] ... fixed-purpose events:   3
[    0.064003] ... event mask:             0000000700000003
[    0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.064003] CPU 1 irqstacks, hard=f60b6000 soft=f60b8000
[    0.064003] Booting Node   0, Processors  #1 Ok.
[    0.064003] smpboot cpu 1: start_ip = 99000
[    0.008000] Initializing CPU#1
[    0.156092] NMI watchdog enabled, takes one hw-pmu counter.
[    0.156407] Brought up 2 CPUs
[    0.156511] Total of 2 processors activated (4389.00 BogoMIPS).
[    0.157324] devtmpfs: initialized
[    0.157324] PM: Registering ACPI NVS region at 3f69e000 (204800 bytes)
[    0.157324] print_constraints: dummy: 
[    0.157324] NET: Registered protocol family 16
[    0.160067] ACPI: bus type pci registered
[    0.160563] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.160709] PCI: not using MMCONFIG
[    0.161103] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
[    0.161326] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
[    0.161433] PCI: Using configuration type 1 for base access
[    0.162815] bio: create slab <bio-0> at 0
[    0.166075] ACPI: EC: Look up EC in DSDT
[    0.168576] ACPI: Executed 1 blocks of module-level executable AML code
[    0.173063] ACPI Warning: Incorrect checksum in table [OEMB] - 0x47, should be 0x98 (20110316/tbutils-314)
[    0.174218] ACPI: SSDT 3f6a0270 001FA (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.175048] ACPI: Dynamic OEM Table Load:
[    0.175265] ACPI: SSDT   (null) 001FA (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.176341] ACPI: SSDT 3f6a01a0 000CC (v01  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    0.177145] ACPI: Dynamic OEM Table Load:
[    0.177360] ACPI: SSDT   (null) 000CC (v01  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    0.178060] ACPI: Interpreter enabled
[    0.178170] ACPI: (supports S0 S3 S4 S5)
[    0.178547] ACPI: Using IOAPIC for interrupt routing
[    0.178729] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.182425] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.182567] PCI: Using MMCONFIG for extended config space
[    0.183839] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.204308] ACPI: No dock devices found.
[    0.204414] HEST: Table not found.
[    0.204518] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.204978] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.205727] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.205845] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.205956] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.206092] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[    0.206229] pci_root PNP0A08:00: host bridge window [mem 0x3f800000-0xdfffffff]
[    0.206366] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff]
[    0.206515] pci_root PNP0A08:00: address space collision: host bridge window [mem 0x000d0000-0x000dffff] conflicts with Adapter ROM [mem 0x000ce800-0x000d27ff]
[    0.206729] pci 0000:00:00.0: [8086:8100] type 0 class 0x000600
[    0.206844] pci 0000:00:02.0: [8086:8108] type 0 class 0x000300
[    0.206880] pci 0000:00:02.0: reg 10: [mem 0xfe980000-0xfe9fffff]
[    0.206900] pci 0000:00:02.0: reg 14: [io  0xc880-0xc887]
[    0.206919] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff]
[    0.206939] pci 0000:00:02.0: reg 1c: [mem 0xfe940000-0xfe97ffff]
[    0.207087] pci 0000:00:1b.0: [8086:811b] type 0 class 0x000403
[    0.207119] pci 0000:00:1b.0: reg 10: [mem 0xfe938000-0xfe93bfff 64bit]
[    0.207207] pci 0000:00:1b.0: PME# supported from D0 D3hot
[    0.207219] pci 0000:00:1b.0: PME# disabled
[    0.207259] pci 0000:00:1c.0: [8086:8110] type 1 class 0x000604
[    0.207345] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.207356] pci 0000:00:1c.0: PME# disabled
[    0.207398] pci 0000:00:1c.1: [8086:8112] type 1 class 0x000604
[    0.207484] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.207495] pci 0000:00:1c.1: PME# disabled
[    0.207541] pci 0000:00:1d.0: [8086:8114] type 0 class 0x000c03
[    0.207602] pci 0000:00:1d.0: reg 20: [io  0xc480-0xc49f]
[    0.207659] pci 0000:00:1d.1: [8086:8115] type 0 class 0x000c03
[    0.207722] pci 0000:00:1d.1: reg 20: [io  0xc080-0xc09f]
[    0.207777] pci 0000:00:1d.2: [8086:8116] type 0 class 0x000c03
[    0.207840] pci 0000:00:1d.2: reg 20: [io  0xb880-0xb89f]
[    0.207935] pci 0000:00:1d.7: [8086:8117] type 0 class 0x000c03
[    0.207978] pci 0000:00:1d.7: reg 10: [mem 0xfe937c00-0xfe937fff]
[    0.208132] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.208146] pci 0000:00:1d.7: PME# disabled
[    0.208185] pci 0000:00:1f.0: [8086:8119] type 0 class 0x000601
[    0.208300] pci 0000:00:1f.1: [8086:811a] type 0 class 0x000101
[    0.208365] pci 0000:00:1f.1: reg 20: [io  0xffa0-0xffaf]
[    0.208503] pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200
[    0.208535] pci 0000:01:00.0: reg 10: [io  0xdd00-0xddff]
[    0.208582] pci 0000:01:00.0: reg 18: [mem 0xfeaff000-0xfeafffff 64bit]
[    0.208616] pci 0000:01:00.0: reg 20: [mem 0xcfff0000-0xcfffffff 64bit pref]
[    0.208640] pci 0000:01:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref]
[    0.208702] pci 0000:01:00.0: supports D1 D2
[    0.208710] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.208722] pci 0000:01:00.0: PME# disabled
[    0.216053] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.216163] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.216175] pci 0000:00:1c.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.216188] pci 0000:00:1c.0:   bridge window [mem 0xcff00000-0xcfffffff pref]
[    0.216293] pci 0000:02:00.0: [1095:3132] type 0 class 0x000180
[    0.216338] pci 0000:02:00.0: reg 10: [mem 0xfebffc00-0xfebffc7f 64bit]
[    0.216374] pci 0000:02:00.0: reg 18: [mem 0xfebf8000-0xfebfbfff 64bit]
[    0.216400] pci 0000:02:00.0: reg 20: [io  0xe880-0xe8ff]
[    0.216442] pci 0000:02:00.0: reg 30: [mem 0xfeb00000-0xfeb7ffff pref]
[    0.216504] pci 0000:02:00.0: supports D1 D2
[    0.216538] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.220037] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.220146] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    0.220158] pci 0000:00:1c.1:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.220171] pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.220196] pci_bus 0000:00: on NUMA node 0
[    0.220209] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.220558] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.POP4._PRT]
[    0.220682] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.POP5._PRT]
[    0.220792]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.220900] Unable to assume _OSC PCIe control. Disabling ASPM
[    0.233641] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.234591] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.235533] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.236488] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.237430] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.238512] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.239596] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.240687] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.241973] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.242128] vgaarb: loaded
[    0.242360] PCI: Using ACPI for IRQ routing
[    0.242466] PCI: pci_cache_line_size set to 64 bytes
[    0.242584] reserve RAM buffer: 000000000009d800 - 000000000009ffff 
[    0.242594] reserve RAM buffer: 000000003f680000 - 000000003fffffff 
[    0.243005] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.243125] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.243458] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.248082] Switching to clocksource hpet
[    0.251709] Switched to NOHz mode on CPU #0
[    0.251813] Switched to NOHz mode on CPU #1
[    0.252170] pnp: PnP ACPI init
[    0.252320] ACPI: bus type pnp registered
[    0.252820] pnp 00:00: [bus 00-ff]
[    0.252831] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.252840] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.252849] pnp 00:00: [io  0x0d00-0xffff window]
[    0.252859] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.252868] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.252877] pnp 00:00: [mem 0x3f800000-0xdfffffff window]
[    0.252887] pnp 00:00: [mem 0xf0000000-0xffffffff window]
[    0.253042] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.253325] pnp 00:01: [mem 0x40000000-0x7fffffff]
[    0.253336] pnp 00:01: [mem 0x3f800000-0x3fffffff]
[    0.253479] system 00:01: [mem 0x40000000-0x7fffffff] has been reserved
[    0.253597] system 00:01: [mem 0x3f800000-0x3fffffff] has been reserved
[    0.253710] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.253808] pnp 00:02: [io  0x0070-0x0071]
[    0.253838] pnp 00:02: [irq 8]
[    0.253932] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.254098] pnp 00:03: [io  0x0061]
[    0.254200] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.254238] pnp 00:04: [io  0x00f0-0x00ff]
[    0.254255] pnp 00:04: [irq 13]
[    0.254349] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.254666] pnp 00:05: [io  0x0000-0xffffffffffffffff disabled]
[    0.254677] pnp 00:05: [io  0x0a00-0x0a0f]
[    0.254686] pnp 00:05: [io  0x0a10-0x0a1f]
[    0.254838] system 00:05: [io  0x0a00-0x0a0f] has been reserved
[    0.254950] system 00:05: [io  0x0a10-0x0a1f] has been reserved
[    0.255060] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.255449] pnp 00:06: [io  0x0010-0x001f]
[    0.255459] pnp 00:06: [io  0x0022-0x003f]
[    0.255467] pnp 00:06: [io  0x0044-0x005f]
[    0.255475] pnp 00:06: [io  0x0063]
[    0.255482] pnp 00:06: [io  0x0065]
[    0.255490] pnp 00:06: [io  0x0067-0x006f]
[    0.255498] pnp 00:06: [io  0x0072-0x007f]
[    0.255506] pnp 00:06: [io  0x0080]
[    0.255513] pnp 00:06: [io  0x0084-0x0086]
[    0.255521] pnp 00:06: [io  0x0088]
[    0.255529] pnp 00:06: [io  0x008c-0x008e]
[    0.255537] pnp 00:06: [io  0x0090-0x009f]
[    0.255545] pnp 00:06: [io  0x00a2-0x00bf]
[    0.255552] pnp 00:06: [io  0x00e0-0x00ef]
[    0.255560] pnp 00:06: [io  0x04d0-0x04d1]
[    0.255568] pnp 00:06: [io  0x0900-0x09f3]
[    0.255576] pnp 00:06: [io  0x0400-0x043f]
[    0.255584] pnp 00:06: [io  0x0480-0x04bf]
[    0.255593] pnp 00:06: [mem 0xf0000000-0xf0003fff]
[    0.255777] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.255901] system 00:06: [io  0x0900-0x09f3] has been reserved
[    0.256059] system 00:06: [io  0x0400-0x043f] has been reserved
[    0.256169] system 00:06: [io  0x0480-0x04bf] has been reserved
[    0.256279] system 00:06: [mem 0xf0000000-0xf0003fff] has been reserved
[    0.256392] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.256476] pnp 00:07: [mem 0xfed00000-0xfed003ff]
[    0.256581] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.256760] pnp 00:08: [mem 0xff800000-0xffbfffff]
[    0.256771] pnp 00:08: [mem 0xffc00000-0xffffffff]
[    0.256867] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
[    0.257028] pnp 00:09: [mem 0xffc00000-0xffbfffff disabled]
[    0.257163] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.257477] pnp 00:0a: [io  0x0060]
[    0.257486] pnp 00:0a: [io  0x0064]
[    0.257495] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[    0.257504] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[    0.257645] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.257760] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.257874] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.258009] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[    0.258150] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[    0.258264] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.258756] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[    0.258767] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[    0.258776] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[    0.258785] pnp 00:0c: [mem 0x00100000-0x3f7fffff]
[    0.258795] pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.258926] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.259041] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.259155] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.259268] system 00:0c: [mem 0x00100000-0x3f7fffff] could not be reserved
[    0.259382] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.259834] pnp: PnP ACPI: found 13 devices
[    0.259935] ACPI: ACPI bus type pnp unregistered
[    0.260068] PnPBIOS: Disabled by ACPI PNP
[    0.301277] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80000000-0x801fffff pref]
[    0.301424] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.301533] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.301646] pci 0000:00:1c.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.301760] pci 0000:00:1c.0:   bridge window [mem 0xcff00000-0xcfffffff pref]
[    0.301903] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.302009] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    0.302121] pci 0000:00:1c.1:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.302235] pci 0000:00:1c.1:   bridge window [mem 0x80000000-0x801fffff pref]
[    0.302412] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.302528] pci 0000:00:1c.0: setting latency timer to 64
[    0.302551] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.302665] pci 0000:00:1c.1: setting latency timer to 64
[    0.302677] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.302687] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.302696] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.302706] pci_bus 0000:00: resource 7 [mem 0x3f800000-0xdfffffff]
[    0.302715] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xffffffff]
[    0.302725] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.302735] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.302745] pci_bus 0000:01: resource 2 [mem 0xcff00000-0xcfffffff pref]
[    0.302755] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.302764] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.302774] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff pref]
[    0.302989] NET: Registered protocol family 2
[    0.303391] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.304559] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.306207] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.307120] TCP: Hash tables configured (established 131072 bind 65536)
[    0.307232] TCP reno registered
[    0.307338] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.307474] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.308382] NET: Registered protocol family 1
[    0.308547] pci 0000:00:02.0: Boot video device
[    0.308716] PCI: CLS 32 bytes, default 64
[    0.308875] Unpacking initramfs...
[    1.040537] Freeing initrd memory: 8980k freed
[    1.057150] audit: initializing netlink socket (disabled)
[    1.057293] type=2000 audit(1322186130.052:1): initialized
[    1.094730] highmem bounce pool size: 64 pages
[    1.094849] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.095951] VFS: Disk quotas dquot_6.5.2
[    1.096340] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.096792] msgmni has been set to 1751
[    1.097477] alg: No test for stdrng (krng)
[    1.097696] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.097837] io scheduler noop registered
[    1.097935] io scheduler deadline registered
[    1.098087] io scheduler cfq registered (default)
[    1.098926] ERST: Table is not found!
[    1.099062] isapnp: Scanning for PnP cards...
[    1.454299] isapnp: No Plug & Play device found
[    1.454625] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.475399] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.496274] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.497862] Linux agpgart interface v0.103
[    1.498660] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.501611] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.501732] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.502269] mousedev: PS/2 mouse device common for all mice
[    1.502517] rtc_cmos 00:02: RTC can wake from S4
[    1.502874] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.503018] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.503167] cpuidle: using governor ladder
[    1.503267] cpuidle: using governor menu
[    1.504287] TCP cubic registered
[    1.504554] NET: Registered protocol family 10
[    1.506904] Mobile IPv6
[    1.507004] NET: Registered protocol family 17
[    1.507114] Registering the dns_resolver key type
[    1.507282] Using IPI No-Shortcut mode
[    1.507707] PM: Hibernation image not present or could not be loaded.
[    1.507748] registered taskstats version 1
[    1.508636] rtc_cmos 00:02: setting system clock to 2011-11-25 01:55:30 UTC (1322186130)
[    1.508884] Initializing network drop monitor service
[    1.509283] Freeing unused kernel memory: 440k freed
[    1.509865] Write protecting the kernel text: 2788k
[    1.510052] Write protecting the kernel read-only data: 1032k
[    1.510157] NX-protecting the kernel data: 3356k
[    1.554126] udevd[47]: starting version 171
[    1.843820] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.856501] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.856714] r8169 0000:01:00.0: setting latency timer to 64
[    1.856817] r8169 0000:01:00.0: irq 40 for MSI/MSI-X
[    1.859385] r8169 0000:01:00.0: eth0: RTL8168c/8111c at 0xf8314000, 00:50:c2:20:2d:f1, XID 1c4000c0 IRQ 40
[    2.051761] SCSI subsystem initialized
[    2.056246] Refined TSC clocksource calibration: 1097.249 MHz.
[    2.056375] Switching to clocksource tsc
[    2.064706] usbcore: registered new interface driver usbfs
[    2.064908] usbcore: registered new interface driver hub
[    2.075062] usbcore: registered new device driver usb
[    2.096443] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.096679] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    2.104185] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    2.104203] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    2.104481] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    2.128161] ehci_hcd 0000:00:1d.7: debug port 1
[    2.132183] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    2.132255] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe937c00
[    2.148062] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.148314] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.148434] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.148574] usb usb1: Product: EHCI Host Controller
[    2.148682] usb usb1: Manufacturer: Linux 2.6.39-2-686-pae ehci_hcd
[    2.148794] usb usb1: SerialNumber: 0000:00:1d.7
[    2.149503] hub 1-0:1.0: USB hub found
[    2.149644] hub 1-0:1.0: 8 ports detected
[    2.171072] uhci_hcd: USB Universal Host Controller Interface driver
[    2.171351] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.171499] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.171515] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.171689] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.188241] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000c480
[    2.188532] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.188650] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.188792] usb usb2: Product: UHCI Host Controller
[    2.188899] usb usb2: Manufacturer: Linux 2.6.39-2-686-pae uhci_hcd
[    2.189011] usb usb2: SerialNumber: 0000:00:1d.0
[    2.189710] hub 2-0:1.0: USB hub found
[    2.189831] hub 2-0:1.0: 2 ports detected
[    2.190218] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.190354] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    2.190368] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.190503] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    2.261853] libata version 3.00 loaded.
[    2.268184] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000c080
[    2.268465] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.268580] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.268716] usb usb3: Product: UHCI Host Controller
[    2.268818] usb usb3: Manufacturer: Linux 2.6.39-2-686-pae uhci_hcd
[    2.268926] usb usb3: SerialNumber: 0000:00:1d.1
[    2.269443] hub 3-0:1.0: USB hub found
[    2.269553] hub 3-0:1.0: 2 ports detected
[    2.269915] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.270043] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    2.270053] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.270178] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    2.288197] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b880
[    2.288481] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.288600] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.288741] usb usb4: Product: UHCI Host Controller
[    2.294304] usb usb4: Manufacturer: Linux 2.6.39-2-686-pae uhci_hcd
[    2.294418] usb usb4: SerialNumber: 0000:00:1d.2
[    2.295116] hub 4-0:1.0: USB hub found
[    2.295244] hub 4-0:1.0: 2 ports detected
[    2.295649] pata_sch 0000:00:1f.1: version 0.2
[    2.295854] pata_sch 0000:00:1f.1: setting latency timer to 64
[    2.297832] scsi0 : pata_sch
[    2.298967] scsi1 : pata_sch
[    2.300404] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    2.300533] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    2.306553] sata_sil24 0000:02:00.0: version 1.1
[    2.306597] sata_sil24 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.307405] sata_sil24 0000:02:00.0: setting latency timer to 64
[    2.309219] scsi2 : sata_sil24
[    2.309730] scsi3 : sata_sil24
[    2.310107] ata3: SATA max UDMA/100 host m128@0xfebffc00 port 0xfebf8000 irq 17
[    2.310261] ata4: SATA max UDMA/100 host m128@0xfebffc00 port 0xfebfa000 irq 17
[    2.580045] usb 1-4: new high speed USB device number 3 using ehci_hcd
[    2.729439] usb 1-4: New USB device found, idVendor=148f, idProduct=3070
[    2.729559] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.729675] usb 1-4: Product: 802.11 n WLAN
[    2.729778] usb 1-4: Manufacturer: Ralink
[    2.729880] usb 1-4: SerialNumber: 1.0
[    2.972043] usb 2-2: new full speed USB device number 2 using uhci_hcd
[    3.141494] usb 2-2: New USB device found, idVendor=058f, idProduct=9254
[    3.141611] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.141723] usb 2-2: Product: Generic USB Hub
[    3.141823] usb 2-2: Manufacturer: ALCOR
[    3.144775] hub 2-2:1.0: USB hub found
[    3.146528] hub 2-2:1.0: 4 ports detected
[    3.429501] usb 2-2.1: new low speed USB device number 3 using uhci_hcd
[    3.637496] usb 2-2.1: New USB device found, idVendor=1e54, idProduct=2030
[    3.637612] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.637748] usb 2-2.1: Product: USB Keyboard
[    3.637848] usb 2-2.1: Manufacturer: TypeMatrix.com
[    3.717517] usb 2-2.3: new low speed USB device number 4 using uhci_hcd
[    3.763342] input: TypeMatrix.com USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.0/input/input0
[    3.763764] generic-usb 0003:1E54:2030.0001: input,hidraw0: USB HID v1.10 Keyboard [TypeMatrix.com USB Keyboard] on usb-0000:00:1d.0-2.1/input0
[    3.835332] input: TypeMatrix.com USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.1/input/input1
[    3.836594] generic-usb 0003:1E54:2030.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [TypeMatrix.com USB Keyboard] on usb-0000:00:1d.0-2.1/input1
[    3.836853] usbcore: registered new interface driver usbhid
[    3.836966] usbhid: USB HID core driver
[    3.860500] usb 2-2.3: New USB device found, idVendor=045e, idProduct=0040
[    3.860620] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.860756] usb 2-2.3: Product: Microsoft Wheel Mouse Optical®
[    3.860862] usb 2-2.3: Manufacturer: Microsoft
[    3.879317] input: Microsoft Microsoft Wheel Mouse Optical® as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.3/2-2.3:1.0/input/input2
[    3.879884] generic-usb 0003:045E:0040.0003: input,hidraw2: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-0000:00:1d.0-2.3/input0
[    4.508064] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[    4.555921] ata3.00: ATA-8: TOSHIBA MK1235GSL, PV010J, max UDMA/100
[    4.556057] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    4.556960] ata3.00: configured for UDMA/100
[    4.557488] scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA MK1235GS PV01 PQ: 0 ANSI: 5
[    6.636058] ata4: SATA link down (SStatus 0 SControl 0)
[    6.690776] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    6.691264] sd 2:0:0:0: [sda] Write Protect is off
[    6.691384] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.691532] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.753249]  sda: sda1 sda2 < sda5 >
[    6.754619] sd 2:0:0:0: [sda] Attached SCSI disk
[    7.355257] PM: Starting manual resume from disk
[    7.355396] PM: Hibernation image partition 8:5 present
[    7.355403] PM: Looking for hibernation image.
[    7.355718] PM: Image not found (code -22)
[    7.355724] PM: Hibernation image not present or could not be loaded.
[    7.419210] EXT3-fs: barriers not enabled
[    7.436242] kjournald starting.  Commit interval 5 seconds
[    7.436516] EXT3-fs (sda1): mounted filesystem with ordered data mode
[   10.069349] udevd[228]: starting version 172
[   11.121071] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[   11.121236] ACPI: Sleep Button [SLPB]
[   11.121636] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[   11.121787] ACPI: Power Button [PWRB]
[   11.122197] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[   11.122426] ACPI: Lid Switch [LID]
[   11.195138] ACPI: acpi_idle registered with cpuidle
[   12.563478] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   12.954703] cfg80211: Calling CRDA to update world regulatory domain
[   12.970278] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   12.970530] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   13.305284] hda_codec: ALC888: BIOS auto-probing.
[   13.305420] hda_codec: ALC888: SKU not ready 0x00000100
[   13.307523] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[   13.313941] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[   13.915992] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   13.918454] Registered led device: rt2800usb-phy0::radio
[   13.918571] Registered led device: rt2800usb-phy0::assoc
[   13.918687] Registered led device: rt2800usb-phy0::quality
[   13.919042] usbcore: registered new interface driver rt2800usb
[   16.132894] Adding 2650688k swap on /dev/sda5.  Priority:-1 extents:1 across:2650688k 
[   16.566896] EXT3-fs (sda1): using internal journal
[   16.771566] loop: module loaded
[   20.102223] r8169 0000:01:00.0: eth0: link down
[   20.102346] r8169 0000:01:00.0: eth0: link down
[   20.103079] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.999518] fuse init (API version 7.16)
[   21.873348] r8169 0000:01:00.0: eth0: link up
[   21.873974] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   23.772278] lp: driver loaded but no devices found
[   24.022975] ppdev: user-space parallel port driver
[   24.067478] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
[   24.067952] parport0: irq 7 detected
[   24.164555] lp0: using parport0 (polling).
[   32.064028] eth0: no IPv6 routers present
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.1.0-1-686-pae (Debian 3.1.1-1) (ben@xxxxxxxxxxxxxxx) (gcc version 4.6.2 (Debian 4.6.2-4) ) #1 SMP Mon Nov 14 08:24:20 UTC 2011
[    0.000000] Disabled fast string operations
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[    0.000000]  BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003f680000 (usable)
[    0.000000]  BIOS-e820: 000000003f680000 - 000000003f690000 (reserved)
[    0.000000]  BIOS-e820: 000000003f690000 - 000000003f69e000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003f69e000 - 000000003f6d0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003f6d0000 - 000000003f6e0000 (reserved)
[    0.000000]  BIOS-e820: 000000003f6e8000 - 000000003f800000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080015  11/19/2009
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x3f680 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 0C0000000 write-back
[    0.000000]   1 base 03F700000 mask 0FFF00000 uncachable
[    0.000000]   2 base 03F800000 mask 0FF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [c00ff780] ff780
[    0.000000] initial memory mapped : 0 - 01a00000
[    0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037800000 page 2M
[    0.000000]  0037800000 - 00379fe000 page 4k
[    0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[    0.000000] RAMDISK: 36d46000 - 3769b000
[    0.000000] ACPI: RSDP 000f9080 00024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 3f690100 0005C (v01 111909 XSDT1533 20091119 MSFT 00000097)
[    0.000000] ACPI: FACP 3f690290 000F4 (v04 111909 FACP1533 20091119 MSFT 00000097)
[    0.000000] ACPI: DSDT 3f690430 03D87 (v02  7652I 7652I102 00000102 INTL 20051117)
[    0.000000] ACPI: FACS 3f69e000 00040
[    0.000000] ACPI: APIC 3f690390 0005C (v02 111909 APIC1533 20091119 MSFT 00000097)
[    0.000000] ACPI: MCFG 3f6903f0 0003C (v01 111909 OEMMCFG  20091119 MSFT 00000097)
[    0.000000] ACPI: OEMB 3f69e040 0012C (v01 111909 OEMB1533 20091119 MSFT 00000097)
[    0.000000] ACPI: HPET 3f6941c0 00038 (v01 111909 OEMHPET  20091119 MSFT 00000097)
[    0.000000] ACPI: GSCI 3f69e170 02024 (v01 111909 GMCHSCI  20091119 MSFT 00000097)
[    0.000000] ACPI: SSDT 3f6a0470 004F0 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 124MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000379fe
[    0.000000]   HighMem  0x000379fe -> 0x0003f680
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x0003f680
[    0.000000] On node 0 totalpages: 259597
[    0.000000] free_area_init_node: node 0, pgdat c1436800, node_mem_map f6556200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3949 pages, LIFO batch:0
[    0.000000]   Normal zone: 1748 pages used for memmap
[    0.000000]   Normal zone: 221994 pages, LIFO batch:31
[    0.000000]   HighMem zone: 250 pages used for memmap
[    0.000000]   HighMem zone: 31624 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x908
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 3f800000 (gap: 3f800000:bf600000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f6200000 s31744 r0 d21504 u1048576
[    0.000000] pcpu-alloc: s31744 r0 d21504 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257567
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-686-pae root=UUID=fea5336a-726d-4e2c-a0cc-61b633ddcbaa ro drm.debug=0x86
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:0003f680)
[    0.000000] Memory: 1014388k/1038848k available (2765k kernel code, 24000k reserved, 1578k data, 404k init, 127496k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
[    0.000000]     vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
[    0.000000]       .init : 0xc143e000 - 0xc14a3000   ( 404 kB)
[    0.000000]       .data : 0xc12b34ec - 0xc143dec0   (1578 kB)
[    0.000000]       .text : 0xc1000000 - 0xc12b34ec   (2765 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:1280
[    0.000000] CPU 0 irqstacks, hard=f5c0a000 soft=f5c0c000
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1097.260 MHz processor.
[    0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 2194.52 BogoMIPS (lpj=4389040)
[    0.004218] pid_max: default: 32768 minimum: 301
[    0.008138] Security Framework initialized
[    0.008320] Mount-cache hash table entries: 512
[    0.009353] Initializing cgroup subsys cpuacct
[    0.009532] Initializing cgroup subsys memory
[    0.009676] Initializing cgroup subsys devices
[    0.009779] Initializing cgroup subsys freezer
[    0.009881] Initializing cgroup subsys net_cls
[    0.009983] Initializing cgroup subsys blkio
[    0.010164] Disabled fast string operations
[    0.010270] CPU: Physical Processor ID: 0
[    0.010369] CPU: Processor Core ID: 0
[    0.010470] mce: CPU supports 5 MCE banks
[    0.010583] CPU0: Thermal monitoring enabled (TM1)
[    0.010693] using mwait in idle threads.
[    0.011590] ACPI: Core revision 20110623
[    0.024199] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.024720] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.064757] CPU0: Intel(R) Atom(TM) CPU Z510   @ 1.10GHz stepping 02
[    0.068003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[    0.068003] ... version:                3
[    0.068003] ... bit width:              40
[    0.068003] ... generic registers:      2
[    0.068003] ... value mask:             000000ffffffffff
[    0.068003] ... max period:             000000007fffffff
[    0.068003] ... fixed-purpose events:   3
[    0.068003] ... event mask:             0000000700000003
[    0.068003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.068003] CPU 1 irqstacks, hard=f5cb4000 soft=f5cb6000
[    0.068003] Booting Node   0, Processors  #1 Ok.
[    0.068003] smpboot cpu 1: start_ip = 99000
[    0.008000] Initializing CPU#1
[    0.008000] Disabled fast string operations
[    0.160093] NMI watchdog enabled, takes one hw-pmu counter.
[    0.160494] Brought up 2 CPUs
[    0.160598] Total of 2 processors activated (4389.00 BogoMIPS).
[    0.161782] devtmpfs: initialized
[    0.161782] PM: Registering ACPI NVS region at 3f69e000 (204800 bytes)
[    0.164231] print_constraints: dummy: 
[    0.164583] NET: Registered protocol family 16
[    0.165052] ACPI: bus type pci registered
[    0.165559] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.165708] PCI: not using MMCONFIG
[    0.166111] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
[    0.166335] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
[    0.166441] PCI: Using configuration type 1 for base access
[    0.168210] bio: create slab <bio-0> at 0
[    0.168445] ACPI: Added _OSI(Module Device)
[    0.168445] ACPI: Added _OSI(Processor Device)
[    0.168445] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.168543] ACPI: Added _OSI(Processor Aggregator Device)
[    0.172295] ACPI: EC: Look up EC in DSDT
[    0.175223] ACPI: Executed 1 blocks of module-level executable AML code
[    0.180315] ACPI Warning: Incorrect checksum in table [OEMB] - 0x47, should be 0x98 (20110623/tbutils-314)
[    0.181549] ACPI: SSDT 3f6a0270 001FA (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.182494] ACPI: Dynamic OEM Table Load:
[    0.182711] ACPI: SSDT   (null) 001FA (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.183851] ACPI: SSDT 3f6a01a0 000CC (v01  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    0.184774] ACPI: Dynamic OEM Table Load:
[    0.184991] ACPI: SSDT   (null) 000CC (v01  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    0.185755] ACPI: Interpreter enabled
[    0.185868] ACPI: (supports S0 S3 S4 S5)
[    0.186255] ACPI: Using IOAPIC for interrupt routing
[    0.186445] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.190613] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.190756] PCI: Using MMCONFIG for extended config space
[    0.192160] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.203905] ACPI: No dock devices found.
[    0.204025] HEST: Table not found.
[    0.204132] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.204608] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.205421] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.205535] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.205651] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.205788] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[    0.205925] pci_root PNP0A08:00: host bridge window [mem 0x3f800000-0xdfffffff]
[    0.206062] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff]
[    0.206211] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with Adapter ROM [mem 0x000ce800-0x000d27ff])
[    0.206394] pci 0000:00:00.0: [8086:8100] type 0 class 0x000600
[    0.206515] pci 0000:00:02.0: [8086:8108] type 0 class 0x000300
[    0.206552] pci 0000:00:02.0: reg 10: [mem 0xfe980000-0xfe9fffff]
[    0.206572] pci 0000:00:02.0: reg 14: [io  0xc880-0xc887]
[    0.206592] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff]
[    0.206612] pci 0000:00:02.0: reg 1c: [mem 0xfe940000-0xfe97ffff]
[    0.206762] pci 0000:00:1b.0: [8086:811b] type 0 class 0x000403
[    0.206794] pci 0000:00:1b.0: reg 10: [mem 0xfe938000-0xfe93bfff 64bit]
[    0.206885] pci 0000:00:1b.0: PME# supported from D0 D3hot
[    0.206897] pci 0000:00:1b.0: PME# disabled
[    0.206943] pci 0000:00:1c.0: [8086:8110] type 1 class 0x000604
[    0.207031] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.207043] pci 0000:00:1c.0: PME# disabled
[    0.207086] pci 0000:00:1c.1: [8086:8112] type 1 class 0x000604
[    0.207176] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.207187] pci 0000:00:1c.1: PME# disabled
[    0.207237] pci 0000:00:1d.0: [8086:8114] type 0 class 0x000c03
[    0.207299] pci 0000:00:1d.0: reg 20: [io  0xc480-0xc49f]
[    0.207356] pci 0000:00:1d.1: [8086:8115] type 0 class 0x000c03
[    0.207419] pci 0000:00:1d.1: reg 20: [io  0xc080-0xc09f]
[    0.207479] pci 0000:00:1d.2: [8086:8116] type 0 class 0x000c03
[    0.207542] pci 0000:00:1d.2: reg 20: [io  0xb880-0xb89f]
[    0.207620] pci 0000:00:1d.7: [8086:8117] type 0 class 0x000c03
[    0.207663] pci 0000:00:1d.7: reg 10: [mem 0xfe937c00-0xfe937fff]
[    0.207804] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.207817] pci 0000:00:1d.7: PME# disabled
[    0.207860] pci 0000:00:1f.0: [8086:8119] type 0 class 0x000601
[    0.207974] pci 0000:00:1f.1: [8086:811a] type 0 class 0x000101
[    0.208066] pci 0000:00:1f.1: reg 20: [io  0xffa0-0xffaf]
[    0.208220] pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200
[    0.208253] pci 0000:01:00.0: reg 10: [io  0xdd00-0xddff]
[    0.208300] pci 0000:01:00.0: reg 18: [mem 0xfeaff000-0xfeafffff 64bit]
[    0.208333] pci 0000:01:00.0: reg 20: [mem 0xcfff0000-0xcfffffff 64bit pref]
[    0.208358] pci 0000:01:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref]
[    0.208423] pci 0000:01:00.0: supports D1 D2
[    0.208431] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.208444] pci 0000:01:00.0: PME# disabled
[    0.216056] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.216167] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.216179] pci 0000:00:1c.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.216194] pci 0000:00:1c.0:   bridge window [mem 0xcff00000-0xcfffffff pref]
[    0.216300] pci 0000:02:00.0: [1095:3132] type 0 class 0x000180
[    0.216346] pci 0000:02:00.0: reg 10: [mem 0xfebffc00-0xfebffc7f 64bit]
[    0.216382] pci 0000:02:00.0: reg 18: [mem 0xfebf8000-0xfebfbfff 64bit]
[    0.216408] pci 0000:02:00.0: reg 20: [io  0xe880-0xe8ff]
[    0.216450] pci 0000:02:00.0: reg 30: [mem 0xfeb00000-0xfeb7ffff pref]
[    0.216513] pci 0000:02:00.0: supports D1 D2
[    0.216549] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.220039] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.220148] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    0.220160] pci 0000:00:1c.1:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.220188] pci_bus 0000:00: on NUMA node 0
[    0.220201] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.220596] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.POP4._PRT]
[    0.220740] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.POP5._PRT]
[    0.220866]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.220978]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.221117] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.235128] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.236117] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.237082] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.238040] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.238996] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.240119] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.241226] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.242326] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.243541] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.243541] vgaarb: loaded
[    0.243541] vgaarb: bridge control possible 0000:00:02.0
[    0.244178] PCI: Using ACPI for IRQ routing
[    0.244283] PCI: pci_cache_line_size set to 64 bytes
[    0.244406] reserve RAM buffer: 000000000009d800 - 000000000009ffff 
[    0.244417] reserve RAM buffer: 000000003f680000 - 000000003fffffff 
[    0.244845] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.244965] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.245300] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.252083] Switching to clocksource hpet
[    0.255627] Switched to NOHz mode on CPU #0
[    0.255780] Switched to NOHz mode on CPU #1
[    0.257730] pnp: PnP ACPI init
[    0.257887] ACPI: bus type pnp registered
[    0.258399] pnp 00:00: [bus 00-ff]
[    0.258411] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.258420] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.258430] pnp 00:00: [io  0x0d00-0xffff window]
[    0.258439] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.258449] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.258458] pnp 00:00: [mem 0x3f800000-0xdfffffff window]
[    0.258468] pnp 00:00: [mem 0xf0000000-0xffffffff window]
[    0.258641] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.258954] pnp 00:01: [mem 0x40000000-0x7fffffff]
[    0.258965] pnp 00:01: [mem 0x3f800000-0x3fffffff]
[    0.259115] system 00:01: [mem 0x40000000-0x7fffffff] has been reserved
[    0.259238] system 00:01: [mem 0x3f800000-0x3fffffff] has been reserved
[    0.259351] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.259459] pnp 00:02: [io  0x0070-0x0071]
[    0.259489] pnp 00:02: [irq 8]
[    0.259587] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.259768] pnp 00:03: [io  0x0061]
[    0.259881] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.259923] pnp 00:04: [io  0x00f0-0x00ff]
[    0.259942] pnp 00:04: [irq 13]
[    0.260105] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.260455] pnp 00:05: [io  0x0000-0xffffffffffffffff disabled]
[    0.260466] pnp 00:05: [io  0x0a00-0x0a0f]
[    0.260474] pnp 00:05: [io  0x0a10-0x0a1f]
[    0.260617] system 00:05: [io  0x0a00-0x0a0f] has been reserved
[    0.260730] system 00:05: [io  0x0a10-0x0a1f] has been reserved
[    0.260841] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.261252] pnp 00:06: [io  0x0010-0x001f]
[    0.261262] pnp 00:06: [io  0x0022-0x003f]
[    0.261271] pnp 00:06: [io  0x0044-0x005f]
[    0.261279] pnp 00:06: [io  0x0063]
[    0.261286] pnp 00:06: [io  0x0065]
[    0.261294] pnp 00:06: [io  0x0067-0x006f]
[    0.261303] pnp 00:06: [io  0x0072-0x007f]
[    0.261310] pnp 00:06: [io  0x0080]
[    0.261318] pnp 00:06: [io  0x0084-0x0086]
[    0.261326] pnp 00:06: [io  0x0088]
[    0.261334] pnp 00:06: [io  0x008c-0x008e]
[    0.261342] pnp 00:06: [io  0x0090-0x009f]
[    0.261351] pnp 00:06: [io  0x00a2-0x00bf]
[    0.261359] pnp 00:06: [io  0x00e0-0x00ef]
[    0.261367] pnp 00:06: [io  0x04d0-0x04d1]
[    0.261375] pnp 00:06: [io  0x0900-0x09f3]
[    0.261384] pnp 00:06: [io  0x0400-0x043f]
[    0.261392] pnp 00:06: [io  0x0480-0x04bf]
[    0.261401] pnp 00:06: [mem 0xf0000000-0xf0003fff]
[    0.261578] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.261690] system 00:06: [io  0x0900-0x09f3] has been reserved
[    0.261799] system 00:06: [io  0x0400-0x043f] has been reserved
[    0.261909] system 00:06: [io  0x0480-0x04bf] has been reserved
[    0.262020] system 00:06: [mem 0xf0000000-0xf0003fff] has been reserved
[    0.262133] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.262221] pnp 00:07: [mem 0xfed00000-0xfed003ff]
[    0.262324] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.262516] pnp 00:08: [mem 0xff800000-0xffbfffff]
[    0.262526] pnp 00:08: [mem 0xffc00000-0xffffffff]
[    0.262633] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
[    0.262808] pnp 00:09: [mem 0xffc00000-0xffbfffff disabled]
[    0.262945] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.263297] pnp 00:0a: [io  0x0060]
[    0.263307] pnp 00:0a: [io  0x0064]
[    0.263316] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[    0.263325] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[    0.263469] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.263586] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.263699] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.263838] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[    0.263986] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[    0.264130] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.264671] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[    0.264682] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[    0.264691] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[    0.264700] pnp 00:0c: [mem 0x00100000-0x3f7fffff]
[    0.264710] pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.264848] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.264964] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.265078] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.265196] system 00:0c: [mem 0x00100000-0x3f7fffff] could not be reserved
[    0.265310] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.265815] pnp: PnP ACPI: found 13 devices
[    0.265916] ACPI: ACPI bus type pnp unregistered
[    0.266022] PnPBIOS: Disabled by ACPI PNP
[    0.310426] PCI: max bus depth: 1 pci_try_num: 2
[    0.310478] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80000000-0x801fffff pref]
[    0.310624] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.310732] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.310846] pci 0000:00:1c.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.310960] pci 0000:00:1c.0:   bridge window [mem 0xcff00000-0xcfffffff pref]
[    0.311102] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.311211] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    0.311324] pci 0000:00:1c.1:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.311438] pci 0000:00:1c.1:   bridge window [mem 0x80000000-0x801fffff pref]
[    0.311615] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.311731] pci 0000:00:1c.0: setting latency timer to 64
[    0.311756] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.311870] pci 0000:00:1c.1: setting latency timer to 64
[    0.311882] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.311891] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.311901] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.311911] pci_bus 0000:00: resource 7 [mem 0x3f800000-0xdfffffff]
[    0.311920] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xffffffff]
[    0.311930] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.311940] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.311950] pci_bus 0000:01: resource 2 [mem 0xcff00000-0xcfffffff pref]
[    0.311960] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.311969] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.311979] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff pref]
[    0.312204] NET: Registered protocol family 2
[    0.312610] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.313712] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.315348] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.316312] TCP: Hash tables configured (established 131072 bind 65536)
[    0.316432] TCP reno registered
[    0.316544] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.316673] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.317339] NET: Registered protocol family 1
[    0.317505] pci 0000:00:02.0: Boot video device
[    0.317679] PCI: CLS 32 bytes, default 64
[    0.317857] Unpacking initramfs...
[    1.035211] Freeing initrd memory: 9556k freed
[    1.053285] audit: initializing netlink socket (disabled)
[    1.053432] type=2000 audit(1322186021.048:1): initialized
[    1.099838] highmem bounce pool size: 64 pages
[    1.099960] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.107765] VFS: Disk quotas dquot_6.5.2
[    1.108180] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.108684] msgmni has been set to 1750
[    1.109394] alg: No test for stdrng (krng)
[    1.109611] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.109752] io scheduler noop registered
[    1.109851] io scheduler deadline registered
[    1.109996] io scheduler cfq registered (default)
[    1.110870] intel_idle: MWAIT substates: 0x3020220
[    1.110891] intel_idle: v0.4 model 0x1C
[    1.110898] intel_idle: lapic_timer_reliable_states 0x2
[    1.110939] Marking TSC unstable due to TSC halts in idle states deeper than C2
[    1.111204] ERST: Table is not found!
[    1.111302] GHES: HEST is not enabled!
[    1.111440] isapnp: Scanning for PnP cards...
[    1.466782] isapnp: No Plug & Play device found
[    1.467162] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.487938] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.508858] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.513248] Linux agpgart interface v0.103
[    1.514094] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.517563] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.517686] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.518312] mousedev: PS/2 mouse device common for all mice
[    1.518560] rtc_cmos 00:02: RTC can wake from S4
[    1.518916] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.519066] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.519531] cpuidle: using governor ladder
[    1.520188] cpuidle: using governor menu
[    1.521128] TCP cubic registered
[    1.521392] NET: Registered protocol family 10
[    1.523587] Mobile IPv6
[    1.523688] NET: Registered protocol family 17
[    1.523798] Registering the dns_resolver key type
[    1.523967] Using IPI No-Shortcut mode
[    1.524630] PM: Hibernation image not present or could not be loaded.
[    1.524667] registered taskstats version 1
[    1.529028] rtc_cmos 00:02: setting system clock to 2011-11-25 01:53:42 UTC (1322186022)
[    1.529377] Initializing network drop monitor service
[    1.529884] Freeing unused kernel memory: 404k freed
[    1.530572] Write protecting the kernel text: 2768k
[    1.530795] Write protecting the kernel read-only data: 1088k
[    1.530902] NX-protecting the kernel data: 3376k
[    1.578677] udevd[49]: starting version 172
[    1.693027] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.693278] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.693481] r8169 0000:01:00.0: setting latency timer to 64
[    1.693593] r8169 0000:01:00.0: irq 40 for MSI/MSI-X
[    1.728202] r8169 0000:01:00.0: eth0: RTL8168c/8111c at 0xf820e000, 00:50:c2:20:2d:f1, XID 1c4000c0 IRQ 40
[    1.772218] SCSI subsystem initialized
[    1.773478] usbcore: registered new interface driver usbfs
[    1.773695] usbcore: registered new interface driver hub
[    1.779835] usbcore: registered new device driver usb
[    1.782761] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.782999] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.783173] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.783191] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.783477] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.783739] ehci_hcd 0000:00:1d.7: debug port 1
[    1.787780] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.829467] libata version 3.00 loaded.
[    1.831144] sata_sil24 0000:02:00.0: version 1.1
[    1.831192] sata_sil24 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.831574] sata_sil24 0000:02:00.0: setting latency timer to 64
[    1.843782] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe937c00
[    1.849740] scsi0 : sata_sil24
[    1.850386] scsi1 : sata_sil24
[    1.850742] ata1: SATA max UDMA/100 host m128@0xfebffc00 port 0xfebf8000 irq 17
[    1.850902] ata2: SATA max UDMA/100 host m128@0xfebffc00 port 0xfebfa000 irq 17
[    1.856626] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.856897] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.857024] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.857173] usb usb1: Product: EHCI Host Controller
[    1.857300] usb usb1: Manufacturer: Linux 3.1.0-1-686-pae ehci_hcd
[    1.857418] usb usb1: SerialNumber: 0000:00:1d.7
[    1.859407] hub 1-0:1.0: USB hub found
[    1.859548] hub 1-0:1.0: 8 ports detected
[    1.860623] pata_sch 0000:00:1f.1: version 0.2
[    1.860830] pata_sch 0000:00:1f.1: setting latency timer to 64
[    1.867509] scsi2 : pata_sch
[    1.868147] scsi3 : pata_sch
[    1.869698] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.869831] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.915256] uhci_hcd: USB Universal Host Controller Interface driver
[    1.915527] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.915674] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.915690] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.915851] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.916190] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000c480
[    1.916475] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.916601] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.916749] usb usb2: Product: UHCI Host Controller
[    1.916864] usb usb2: Manufacturer: Linux 3.1.0-1-686-pae uhci_hcd
[    1.916983] usb usb2: SerialNumber: 0000:00:1d.0
[    1.918488] hub 2-0:1.0: USB hub found
[    1.918623] hub 2-0:1.0: 2 ports detected
[    1.919054] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.919204] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.919221] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.919380] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.919597] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000c080
[    1.919880] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.925787] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.925943] usb usb3: Product: UHCI Host Controller
[    1.926058] usb usb3: Manufacturer: Linux 3.1.0-1-686-pae uhci_hcd
[    1.926177] usb usb3: SerialNumber: 0000:00:1d.1
[    1.927073] hub 3-0:1.0: USB hub found
[    1.927207] hub 3-0:1.0: 2 ports detected
[    1.927670] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.927817] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.927848] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.928980] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.929253] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b880
[    1.929544] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.929671] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.929821] usb usb4: Product: UHCI Host Controller
[    1.929935] usb usb4: Manufacturer: Linux 3.1.0-1-686-pae uhci_hcd
[    1.930053] usb usb4: SerialNumber: 0000:00:1d.2
[    1.930772] hub 4-0:1.0: USB hub found
[    1.930906] hub 4-0:1.0: 2 ports detected
[    2.280070] usb 1-4: new high speed USB device number 3 using ehci_hcd
[    2.429896] usb 1-4: New USB device found, idVendor=148f, idProduct=3070
[    2.430030] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.430167] usb 1-4: Product: 802.11 n WLAN
[    2.430272] usb 1-4: Manufacturer: Ralink
[    2.430375] usb 1-4: SerialNumber: 1.0
[    2.676108] usb 2-2: new full speed USB device number 2 using uhci_hcd
[    2.844474] usb 2-2: New USB device found, idVendor=058f, idProduct=9254
[    2.844591] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.844704] usb 2-2: Product: Generic USB Hub
[    2.844805] usb 2-2: Manufacturer: ALCOR
[    2.846733] hub 2-2:1.0: USB hub found
[    2.848471] hub 2-2:1.0: 4 ports detected
[    3.129470] usb 2-2.1: new low speed USB device number 3 using uhci_hcd
[    3.337482] usb 2-2.1: New USB device found, idVendor=1e54, idProduct=2030
[    3.337598] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.337735] usb 2-2.1: Product: USB Keyboard
[    3.337835] usb 2-2.1: Manufacturer: TypeMatrix.com
[    3.417470] usb 2-2.3: new low speed USB device number 4 using uhci_hcd
[    3.561439] usb 2-2.3: New USB device found, idVendor=045e, idProduct=0040
[    3.561555] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.561691] usb 2-2.3: Product: Microsoft Wheel Mouse Optical®
[    3.561798] usb 2-2.3: Manufacturer: Microsoft
[    4.048090] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[    4.104979] ata1.00: ATA-8: TOSHIBA MK1235GSL, PV010J, max UDMA/100
[    4.105108] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    4.106132] ata1.00: configured for UDMA/100
[    4.106905] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK1235GS PV01 PQ: 0 ANSI: 5
[    6.184127] ata2: SATA link down (SStatus 0 SControl 0)
[    6.389255] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    6.389779] sd 0:0:0:0: [sda] Write Protect is off
[    6.389902] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.390127] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.445187]  sda: sda1 sda2 < sda5 >
[    6.447161] sd 0:0:0:0: [sda] Attached SCSI disk
[    6.453559] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.458883] input: TypeMatrix.com USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.0/input/input0
[    6.460638] generic-usb 0003:1E54:2030.0001: input,hidraw0: USB HID v1.10 Keyboard [TypeMatrix.com USB Keyboard] on usb-0000:00:1d.0-2.1/input0
[    6.531734] input: TypeMatrix.com USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.1/input/input1
[    6.533246] generic-usb 0003:1E54:2030.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [TypeMatrix.com USB Keyboard] on usb-0000:00:1d.0-2.1/input1
[    6.548717] input: Microsoft Microsoft Wheel Mouse Optical® as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.3/2-2.3:1.0/input/input2
[    6.549445] generic-usb 0003:045E:0040.0003: input,hidraw2: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-0000:00:1d.0-2.3/input0
[    6.549689] usbcore: registered new interface driver usbhid
[    6.549803] usbhid: USB HID core driver
[    7.165206] PM: Starting manual resume from disk
[    7.165346] PM: Hibernation image partition 8:5 present
[    7.165352] PM: Looking for hibernation image.
[    7.189755] PM: Image not found (code -22)
[    7.189763] PM: Hibernation image not present or could not be loaded.
[    7.256729] kjournald starting.  Commit interval 5 seconds
[    7.257027] EXT3-fs (sda1): mounted filesystem with ordered data mode
[    9.893695] udevd[232]: starting version 172
[   10.905544] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[   10.905720] ACPI: Sleep Button [SLPB]
[   10.906139] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[   10.906303] ACPI: Power Button [PWRB]
[   10.906728] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[   10.906979] ACPI: Lid Switch [LID]
[   11.166863] ACPI: acpi_idle yielding to intel_idle
[   11.544630] [drm] Initialized drm 1.1.0 20060810
[   11.655829] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   11.727672] psb_gfx: module is from the staging directory, the quality is unknown, you have been warned.
[   11.731689] gma500 0000:00:02.0: irq 41 for MSI/MSI-X
[   11.731749] gma500 0000:00:02.0: setting latency timer to 64
[   11.733030] ioremap error for 0x3f69e000-0x3f6a1000, requested 0x10, got 0x0
[   11.733803] Stolen memory information
[   11.733902]        base in RAM: 0x3f800000
[   11.734001]        size: 7932K, calculated by (GTT RAM base) - (Stolen base), seems wrong
[   11.734139]       the correct size should be: 8M(dvmt mode=3)
[   11.737972] Set up 1983 stolen pages starting at 0x3f800000, GTT offset 0K
[   11.738343] [drm] SGX core id = 0x01130000
[   11.738445] [drm] SGX core rev major = 0x01, minor = 0x02
[   11.738548] [drm] SGX core rev maintenance = 0x01, designer = 0x00
[   11.752950] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[   11.753849] acpi device:04: registered as cooling_device2
[   11.754652] acpi device:05: registered as cooling_device3
[   11.755153] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[   11.755575] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   11.755793] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   11.755915] [drm] No driver support for vblank timestamp query.
[   11.808286] gma500 0000:00:02.0: Found no modes on the lvds, ignoring the LVDS
[   12.190995] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1]
[   12.300758] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] probed modes :
[   12.300781] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[   12.300809] [drm:drm_mode_debug_printmodeline], Modeline 11:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[   12.300835] [drm:drm_mode_debug_printmodeline], Modeline 10:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[   12.300860] [drm:drm_mode_debug_printmodeline], Modeline 12:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[   12.300886] [drm:drm_mode_debug_printmodeline], Modeline 9:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[   12.300912] [drm:drm_setup_crtcs], 
[   12.300926] [drm:drm_enable_connectors], connector 7 enabled? yes
[   12.300941] [drm:drm_target_preferred], looking for cmdline mode on connector 7
[   12.300956] [drm:drm_target_preferred], looking for preferred mode on connector 7
[   12.300970] [drm:drm_target_preferred], found mode 1024x768
[   12.300981] [drm:drm_setup_crtcs], picking CRTCs for 2048x2048 config
[   12.300999] [drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 3
[   12.301044] gma500 0000:00:02.0: allocated 1024x768 fb
[   12.301545] fbcon: psbfb (fb0) is primary device
[   12.306748] [drm:drm_crtc_helper_set_config], 
[   12.306764] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:15] #connectors=1 (x y) (0 0)
[   12.306793] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[   12.306804] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[   12.306815] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[   12.306833] [drm:drm_mode_debug_printmodeline], Modeline 14:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[   12.306856] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[   12.306868] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[   12.306880] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:VGA-1] to [CRTC:3]
[   12.306892] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[   12.306902] [drm:drm_mode_debug_printmodeline], Modeline 14:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[   12.306934] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[   12.340451] [drm:drm_mode_debug_printmodeline], Modeline 14:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[   12.380636] [drm:drm_crtc_helper_set_mode], [ENCODER:8:DAC-8] set [MODE:14:1024x768]
[   12.634759] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[   12.634773] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:7:VGA-1] set DPMS on
[   12.654792] [drm:drm_crtc_helper_set_config], 
[   12.654801] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[   12.654833] [drm:drm_crtc_helper_set_config], [CONNECTOR:7:VGA-1] to [CRTC:3]
[   12.670806] Console: switching to colour frame buffer device 128x48
[   12.686093] fb0: psbfb frame buffer device
[   12.686102] drm: registered panic notifier
[   12.686131] [drm] Initialized gma500 1.0.0 2011-06-06 for 0000:00:02.0 on minor 0
[   12.686269] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   12.686384] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   12.825486] hda_codec: ALC888: BIOS auto-probing.
[   12.825722] hda_codec: ALC888: SKU not ready 0x00000100
[   12.829748] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[   12.840401] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[   12.951231] cfg80211: Calling CRDA to update world regulatory domain
[   13.324091] usb 1-4: reset high speed USB device number 3 using ehci_hcd
[   13.612459] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   13.614782] Registered led device: rt2800usb-phy0::radio
[   13.614900] Registered led device: rt2800usb-phy0::assoc
[   13.615036] Registered led device: rt2800usb-phy0::quality
[   13.615567] usbcore: registered new interface driver rt2800usb
[   15.567806] Adding 2650688k swap on /dev/sda5.  Priority:-1 extents:1 across:2650688k 
[   16.016425] EXT3-fs (sda1): using internal journal
[   16.220981] loop: module loaded
[   19.613436] r8169 0000:01:00.0: eth0: link down
[   19.622920] r8169 0000:01:00.0: eth0: link down
[   19.633283] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.667215] fuse init (API version 7.17)
[   21.395125] r8169 0000:01:00.0: eth0: link up
[   21.402048] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   23.705682] lp: driver loaded but no devices found
[   23.768749] ppdev: user-space parallel port driver
[   23.868091] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
[   23.876947] parport0: irq 7 detected
[   23.974053] lp0: using parport0 (polling).
[   31.456060] eth0: no IPv6 routers present
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel

[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux