The RTL_DEBUG enum is used for rt_global_debug_component global
variable and RT_TRACE. It should be in rtl_debug.h and not rtl_core.h.
The rtl8192_proc_* functions are r8192 specific and should not be in
rtl_debug.h. Move them to rtl_core.h.
Signed-off-by: Sean MacLennan <seanm@xxxxxxxx>
---
This patch assumes the following patche waw already merged:
[PATCH 1/3] rtl8192e: cleanup rtl_debug.h
drivers/staging/rtl8192e/rtl_core.h | 41 +++++----------------------------
drivers/staging/rtl8192e/rtl_debug.h | 42 +++++++++++++++++++++++++++++-----
2 files changed, 42 insertions(+), 41 deletions(-)
diff --git a/drivers/staging/rtl8192e/rtl_core.h b/drivers/staging/rtl8192e/rtl_core.h
index f9af515..c8a7459 100644
--- a/drivers/staging/rtl8192e/rtl_core.h
+++ b/drivers/staging/rtl8192e/rtl_core.h
@@ -215,41 +215,6 @@ enum RTL819x_PHY_PARAM {
RTL819X_EFUSE_MAP = 19,
};
-enum RTL_DEBUG {
- COMP_TRACE = BIT0,
- COMP_DBG = BIT1,
- COMP_INIT = BIT2,
- COMP_RECV = BIT3,
- COMP_SEND = BIT4,
- COMP_CMD = BIT5,
- COMP_POWER = BIT6,
- COMP_EPROM = BIT7,
- COMP_SWBW = BIT8,
- COMP_SEC = BIT9,
- COMP_LPS = BIT10,
- COMP_QOS = BIT11,
- COMP_RATE = BIT12,
- COMP_RXDESC = BIT13,
- COMP_PHY = BIT14,
- COMP_DIG = BIT15,
- COMP_TXAGC = BIT16,
- COMP_HALDM = BIT17,
- COMP_POWER_TRACKING = BIT18,
- COMP_CH = BIT19,
- COMP_RF = BIT20,
- COMP_FIRMWARE = BIT21,
- COMP_HT = BIT22,
- COMP_RESET = BIT23,
- COMP_CMDPKT = BIT24,
- COMP_SCAN = BIT25,
- COMP_PS = BIT26,
- COMP_DOWN = BIT27,
- COMP_INTR = BIT28,
- COMP_LED = BIT29,
- COMP_MLME = BIT30,
- COMP_ERR = BIT31
-};
-
enum nic_t {
NIC_UNKNOWN = 0,
NIC_8192E = 1,
@@ -1121,4 +1086,10 @@ void ActUpdateChannelAccessSetting(struct net_device *dev,
enum wireless_mode WirelessMode,
struct channel_access_setting *ChnlAccessSetting);
+/* proc stuff from rtl_debug.c */
+void rtl8192_proc_init_one(struct net_device *dev);
+void rtl8192_proc_remove_one(struct net_device *dev);
+void rtl8192_proc_module_init(void);
+void rtl8192_proc_module_remove(void);
+
#endif
diff --git a/drivers/staging/rtl8192e/rtl_debug.h b/drivers/staging/rtl8192e/rtl_debug.h
index e1eac1d..b376b6b 100644
--- a/drivers/staging/rtl8192e/rtl_debug.h
+++ b/drivers/staging/rtl8192e/rtl_debug.h
@@ -29,6 +29,42 @@
extern u32 rt_global_debug_component;
+/* These are the defines for rt_global_debug_component */
+enum RTL_DEBUG {
+ COMP_TRACE = (1 << 0),
+ COMP_DBG = (1 << 1),
+ COMP_INIT = (1 << 2),
+ COMP_RECV = (1 << 3),
+ COMP_SEND = (1 << 4),
+ COMP_CMD = (1 << 5),
+ COMP_POWER = (1 << 6),
+ COMP_EPROM = (1 << 7),
+ COMP_SWBW = (1 << 8),
+ COMP_SEC = (1 << 9),
+ COMP_LPS = (1 << 10),
+ COMP_QOS = (1 << 11),
+ COMP_RATE = (1 << 12),
+ COMP_RXDESC = (1 << 13),
+ COMP_PHY = (1 << 14),
+ COMP_DIG = (1 << 15),
+ COMP_TXAGC = (1 << 16),
+ COMP_HALDM = (1 << 17),
+ COMP_POWER_TRACKING = (1 << 18),
+ COMP_CH = (1 << 19),
+ COMP_RF = (1 << 20),
+ COMP_FIRMWARE = (1 << 21),
+ COMP_HT = (1 << 22),
+ COMP_RESET = (1 << 23),
+ COMP_CMDPKT = (1 << 24),
+ COMP_SCAN = (1 << 25),
+ COMP_PS = (1 << 26),
+ COMP_DOWN = (1 << 27),
+ COMP_INTR = (1 << 28),
+ COMP_LED = (1 << 29),
+ COMP_MLME = (1 << 30),
+ COMP_ERR = (1 << 31)
+};
+
#define RT_TRACE(component, x, args...) \
do { \
if (rt_global_debug_component & component) \
@@ -42,10 +78,4 @@ do { \
#expr, __FILE__, __func__, __LINE__); \
}
-/* proc stuff */
-void rtl8192_proc_init_one(struct net_device *dev);
-void rtl8192_proc_remove_one(struct net_device *dev);
-void rtl8192_proc_module_init(void);
-void rtl8192_proc_module_remove(void);
-
#endif
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
