This adds device tree support to the nvec driver. By using this method
it is no longer necessary to specify platform data through a board
file.
Cc: devel@xxxxxxxxxxxxxxxxxxxx
Cc: Greg KH <gregkh@xxxxxxx>
Cc: Julian Andres Klode <jak@xxxxxxxxxxxxx>
Cc: Grant Likely <grant.likely@xxxxxxxxxxxx>
Signed-off-by: Marc Dietrich <marvin24@xxxxxx>
---
.../devicetree/bindings/nvec/nvec_nvidia.txt | 9 ++++++
drivers/staging/nvec/nvec.c | 30 ++++++++++++++++++-
2 files changed, 37 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/nvec/nvec_nvidia.txt
diff --git a/Documentation/devicetree/bindings/nvec/nvec_nvidia.txt b/Documentation/devicetree/bindings/nvec/nvec_nvidia.txt
new file mode 100644
index 0000000..5aeee53
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvec/nvec_nvidia.txt
@@ -0,0 +1,9 @@
+NVIDIA compliant embedded controller
+
+Required properties:
+- compatible : should be "nvidia,nvec".
+- reg : the iomem of the i2c slave controller
+- interrupts : the interrupt line of the i2c slave controller
+- clock-frequency : the frequency of the i2c bus
+- gpios : the gpio used for ec request
+- slave-addr: the i2c address of the slave controller
diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c
index e06b867..fafdfa2 100644
--- a/drivers/staging/nvec/nvec.c
+++ b/drivers/staging/nvec/nvec.c
@@ -27,6 +27,8 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
#include <linux/list.h>
#include <linux/mfd/core.h>
#include <linux/mutex.h>
@@ -727,8 +729,24 @@ static int __devinit tegra_nvec_probe(struct platform_device *pdev)
}
platform_set_drvdata(pdev, nvec);
nvec->dev = &pdev->dev;
- nvec->gpio = pdata->gpio;
- nvec->i2c_addr = pdata->i2c_addr;
+
+ if (pdata) {
+ nvec->gpio = pdata->gpio;
+ nvec->i2c_addr = pdata->i2c_addr;
+ } else if (nvec->dev->of_node) {
+ nvec->gpio = of_get_named_gpio(nvec->dev->of_node, "request-gpios", 0);
+ if (nvec->gpio < 0) {
+ dev_err(&pdev->dev, "no gpio specified");
+ goto failed;
+ }
+ if (of_property_read_u32(nvec->dev->of_node, "slave-addr", &nvec->i2c_addr)) {
+ dev_err(&pdev->dev, "no i2c address specified");
+ goto failed;
+ }
+ } else {
+ dev_err(&pdev->dev, "no platform data\n");
+ goto failed;
+ }
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
@@ -893,6 +911,13 @@ static int tegra_nvec_resume(struct platform_device *pdev)
#define tegra_nvec_resume NULL
#endif
+/* Match table for of_platform binding */
+static const struct of_device_id nvidia_nvec_of_match[] __devinitconst = {
+ { .compatible = "nvidia,nvec", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, nvidia_nvec_of_match);
+
static struct platform_driver nvec_device_driver = {
.probe = tegra_nvec_probe,
.remove = __devexit_p(tegra_nvec_remove),
@@ -901,6 +926,7 @@ static struct platform_driver nvec_device_driver = {
.driver = {
.name = "nvec",
.owner = THIS_MODULE,
+ .of_match_table = nvidia_nvec_of_match,
}
};
--
1.7.5.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
