converted printks to pr_<level>
Remove unnecessary printks and Fixed a brace warning issue.
Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankar.km@xxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/ni_pcimio.c | 37 ++++++++++++----------------
1 files changed, 16 insertions(+), 21 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_pcimio.c b/drivers/staging/comedi/drivers/ni_pcimio.c
index 9148abd..ae76f57 100644
--- a/drivers/staging/comedi/drivers/ni_pcimio.c
+++ b/drivers/staging/comedi/drivers/ni_pcimio.c
@@ -1470,8 +1470,8 @@ static void m_series_stc_writew(struct comedi_device *dev, uint16_t data,
/* FIXME: DIO_Output_Register (16 bit reg) is replaced by M_Offset_Static_Digital_Output (32 bit)
and M_Offset_SCXI_Serial_Data_Out (8 bit) */
default:
- printk("%s: bug! unhandled register=0x%x in switch.\n",
- __func__, reg);
+ pr_warn("%s: bug! unhandled register=0x%x in switch.\n",
+ __func__, reg);
BUG();
return;
break;
@@ -1505,8 +1505,8 @@ static uint16_t m_series_stc_readw(struct comedi_device *dev, int reg)
offset = M_Offset_G01_Status;
break;
default:
- printk("%s: bug! unhandled register=0x%x in switch.\n",
- __func__, reg);
+ pr_warn("%s: bug! unhandled register=0x%x in switch.\n",
+ __func__, reg);
BUG();
return 0;
break;
@@ -1547,8 +1547,8 @@ static void m_series_stc_writel(struct comedi_device *dev, uint32_t data,
offset = M_Offset_G1_Load_B;
break;
default:
- printk("%s: bug! unhandled register=0x%x in switch.\n",
- __func__, reg);
+ pr_warn("%s: bug! unhandled register=0x%x in switch.\n",
+ __func__, reg);
BUG();
return;
break;
@@ -1573,8 +1573,8 @@ static uint32_t m_series_stc_readl(struct comedi_device *dev, int reg)
offset = M_Offset_G1_Save;
break;
default:
- printk("%s: bug! unhandled register=0x%x in switch.\n",
- __func__, reg);
+ pr_warn("%s: bug! unhandled register=0x%x in switch.\n",
+ __func__, reg);
BUG();
return 0;
break;
@@ -1632,9 +1632,8 @@ static void m_series_init_eeprom_buffer(struct comedi_device *dev)
}
devpriv->serial_number = be32_to_cpu(devpriv->serial_number);
- for (i = 0; i < M_SERIES_EEPROM_SIZE; ++i) {
+ for (i = 0; i < M_SERIES_EEPROM_SIZE; ++i)
devpriv->eeprom_buffer[i] = ni_readb(Start_Cal_EEPROM + i);
- }
writel(old_iodwbsr1_bits, devpriv->mite->mite_io_addr + MITE_IODWBSR_1);
writel(old_iodwbsr_bits, devpriv->mite->mite_io_addr + MITE_IODWBSR);
@@ -1665,9 +1664,8 @@ static void init_6143(struct comedi_device *dev)
static int pcimio_detach(struct comedi_device *dev)
{
mio_common_detach(dev);
- if (dev->irq) {
+ if (dev->irq)
free_irq(dev->irq, dev);
- }
if (dev->private) {
mite_free_ring(devpriv->ai_mite_ring);
mite_free_ring(devpriv->ao_mite_ring);
@@ -1684,9 +1682,6 @@ static int pcimio_detach(struct comedi_device *dev)
static int pcimio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
int ret;
-
- printk("comedi%d: ni_pcimio:", dev->minor);
-
ret = ni_alloc_private(dev);
if (ret < 0)
return ret;
@@ -1695,7 +1690,7 @@ static int pcimio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
if (ret < 0)
return ret;
- printk(" %s", boardtype.name);
+ pr_debug("%s\n", boardtype.name);
dev->board_name = boardtype.name;
if (boardtype.reg_type & ni_reg_m_series_mask) {
@@ -1712,7 +1707,7 @@ static int pcimio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
ret = mite_setup(devpriv->mite);
if (ret < 0) {
- printk(" error setting up mite\n");
+ pr_warn("error setting up mite\n");
return ret;
}
comedi_set_hw_dev(dev, &devpriv->mite->pcidev->dev);
@@ -1740,13 +1735,13 @@ static int pcimio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
dev->irq = mite_irq(devpriv->mite);
if (dev->irq == 0) {
- printk(" unknown irq (bad)\n");
+ pr_warn("unknown irq (bad)\n");
} else {
- printk(" ( irq = %u )", dev->irq);
+ pr_debug("( irq = %u )\n", dev->irq);
ret = request_irq(dev->irq, ni_E_interrupt, NI_E_IRQ_FLAGS,
DRV_NAME, dev);
if (ret < 0) {
- printk(" irq not available\n");
+ pr_warn("irq not available\n");
dev->irq = 0;
}
}
@@ -1787,7 +1782,7 @@ static int pcimio_find_device(struct comedi_device *dev, int bus, int slot)
}
}
}
- printk("no device found\n");
+ pr_err("no device found\n");
mite_list_devices();
return -EIO;
}
--
1.7.6.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
