From: Arend van Spriel <arend@xxxxxxxxxxxx>
The field ht_cap was typed ieee80211_ht_cap from ieee80211.h. This
contained little endian annotated field cap_info resulting in sparse
endian warnings. It turned out the driver was setting the field, but
it was actually never used. Therefore it has been removed.
Reported-by: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
Reviewed-by: Roland Vossen <rvossen@xxxxxxxxxxxx>
Signed-off-by: Franky Lin <frankyl@xxxxxxxxxxxx>
---
drivers/staging/brcm80211/brcmsmac/main.c | 23 -----------------------
drivers/staging/brcm80211/brcmsmac/main.h | 2 --
drivers/staging/brcm80211/brcmsmac/stf.c | 9 ---------
3 files changed, 0 insertions(+), 34 deletions(-)
diff --git a/drivers/staging/brcm80211/brcmsmac/main.c b/drivers/staging/brcm80211/brcmsmac/main.c
index 7af7618..35fc8b0 100644
--- a/drivers/staging/brcm80211/brcmsmac/main.c
+++ b/drivers/staging/brcm80211/brcmsmac/main.c
@@ -325,11 +325,6 @@ static u16 frametype(u32 rspec, u8 mimoframe)
*/
#define SSID_FMT_BUF_LEN ((4 * IEEE80211_MAX_SSID_LEN) + 1)
-/* defaults for the HT (MIMO) bss */
-#define HT_CAP (IEEE80211_HT_CAP_SM_PS |\
- IEEE80211_HT_CAP_SUP_WIDTH_20_40 | IEEE80211_HT_CAP_GRN_FLD |\
- IEEE80211_HT_CAP_MAX_AMSDU | IEEE80211_HT_CAP_DSSSCCK40)
-
/*
* The following table lists the buffer memory allocated to xmt fifos in HW.
* the size is in units of 256bytes(one block), total size is HW dependent
@@ -4219,13 +4214,6 @@ void brcms_c_protection_upd(struct brcms_c_info *wlc, uint idx, int val)
static void brcms_c_ht_update_sgi_rx(struct brcms_c_info *wlc, int val)
{
- wlc->ht_cap.cap_info &= ~(IEEE80211_HT_CAP_SGI_20 |
- IEEE80211_HT_CAP_SGI_40);
- wlc->ht_cap.cap_info |= (val & BRCMS_N_SGI_20) ?
- IEEE80211_HT_CAP_SGI_20 : 0;
- wlc->ht_cap.cap_info |= (val & BRCMS_N_SGI_40) ?
- IEEE80211_HT_CAP_SGI_40 : 0;
-
if (wlc->pub->up) {
brcms_c_update_beacon(wlc);
brcms_c_update_probe_resp(wlc, true);
@@ -4236,10 +4224,6 @@ static void brcms_c_ht_update_ldpc(struct brcms_c_info *wlc, s8 val)
{
wlc->stf->ldpc = val;
- wlc->ht_cap.cap_info &= ~IEEE80211_HT_CAP_LDPC_CODING;
- if (wlc->stf->ldpc != OFF)
- wlc->ht_cap.cap_info |= IEEE80211_HT_CAP_LDPC_CODING;
-
if (wlc->pub->up) {
brcms_c_update_beacon(wlc);
brcms_c_update_probe_resp(wlc, true);
@@ -5377,8 +5361,6 @@ brcms_c_attach(struct brcms_info *wl, u16 vendor, u16 device, uint unit,
wlc->bsscfg->wlc = wlc;
wlc->mimoft = FT_HT;
- wlc->ht_cap.cap_info = HT_CAP;
-
wlc->mimo_40txbw = AUTO;
wlc->ofdm_40txbw = AUTO;
wlc->cck_40txbw = AUTO;
@@ -5404,15 +5386,10 @@ brcms_c_attach(struct brcms_info *wl, u16 vendor, u16 device, uint unit,
if (n_disabled & WLFEATURE_DISABLE_11N_STBC_TX) {
wlc->bandstate[BAND_2G_INDEX]->band_stf_stbc_tx = OFF;
wlc->bandstate[BAND_5G_INDEX]->band_stf_stbc_tx = OFF;
- wlc->ht_cap.cap_info &= ~IEEE80211_HT_CAP_TX_STBC;
}
if (n_disabled & WLFEATURE_DISABLE_11N_STBC_RX)
brcms_c_stf_stbc_rx_set(wlc, HT_CAP_RX_STBC_NO);
- /* apply the GF override from nvram conf */
- if (n_disabled & WLFEATURE_DISABLE_11N_GF)
- wlc->ht_cap.cap_info &= ~IEEE80211_HT_CAP_GRN_FLD;
-
/* initialize radio_mpc_disable according to wlc->mpc */
brcms_c_radio_mpc_upd(wlc);
brcms_b_antsel_set(wlc->hw, wlc->asi->antsel_avail);
diff --git a/drivers/staging/brcm80211/brcmsmac/main.h b/drivers/staging/brcm80211/brcmsmac/main.h
index 717843a..8760d7e 100644
--- a/drivers/staging/brcm80211/brcmsmac/main.h
+++ b/drivers/staging/brcm80211/brcmsmac/main.h
@@ -456,7 +456,6 @@ struct brcms_txq_info {
* cck_40txbw: 11N, cck tx b/w override when in 40MHZ mode.
* ofdm_40txbw: 11N, ofdm tx b/w override when in 40MHZ mode.
* mimo_40txbw: 11N, mimo tx b/w override when in 40MHZ mode.
- * ht_cap: HT CAP IE being advertised by this node.
* default_bss: configured BSS parameters.
* mc_fid_counter: BC/MC FIFO frame ID counter.
* country_default: saved country for leaving 802.11d auto-country mode.
@@ -570,7 +569,6 @@ struct brcms_c_info {
s8 cck_40txbw;
s8 ofdm_40txbw;
s8 mimo_40txbw;
- struct ieee80211_ht_cap ht_cap;
struct brcms_bss_info *default_bss;
diff --git a/drivers/staging/brcm80211/brcmsmac/stf.c b/drivers/staging/brcm80211/brcmsmac/stf.c
index 91b53a5..c77bab2 100644
--- a/drivers/staging/brcm80211/brcmsmac/stf.c
+++ b/drivers/staging/brcm80211/brcmsmac/stf.c
@@ -53,9 +53,6 @@ static void brcms_c_stf_stbc_rx_ht_update(struct brcms_c_info *wlc, int val)
return;
}
- wlc->ht_cap.cap_info &= ~IEEE80211_HT_CAP_RX_STBC;
- wlc->ht_cap.cap_info |= (val << IEEE80211_HT_CAP_RX_STBC_SHIFT);
-
if (wlc->pub->up) {
brcms_c_update_beacon(wlc);
brcms_c_update_probe_resp(wlc, true);
@@ -140,12 +137,6 @@ static bool brcms_c_stf_stbc_tx_set(struct brcms_c_info *wlc, s32 int_val)
if ((int_val == ON) && (wlc->stf->txstreams == 1))
return false;
- if ((int_val == OFF) || (wlc->stf->txstreams == 1)
- || !BRCMS_STBC_CAP_PHY(wlc))
- wlc->ht_cap.cap_info &= ~IEEE80211_HT_CAP_TX_STBC;
- else
- wlc->ht_cap.cap_info |= IEEE80211_HT_CAP_TX_STBC;
-
wlc->bandstate[BAND_2G_INDEX]->band_stf_stbc_tx = (s8) int_val;
wlc->bandstate[BAND_5G_INDEX]->band_stf_stbc_tx = (s8) int_val;
--
1.7.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
