Re: [PATCH v2 0/3] staging: zcache: xcfmalloc support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/12/2011 08:55 PM, Nitin Gupta wrote:
> Hi Seth,
> 
> I revised some of the original plans for xcfmalloc and below are some
> details.  I had few nits regarding the current implementation but I'm
> avoiding them here since we may have to change the design itself
> significantly.
> 
> On 09/12/2011 10:35 AM, Seth Jennings wrote:
> 
>> On 09/09/2011 09:41 PM, Nitin Gupta wrote:
>>> On 09/09/2011 04:34 PM, Greg KH wrote:
>>>
>>>> On Wed, Sep 07, 2011 at 09:09:04AM -0500, Seth Jennings wrote:
>>>>> Changelog:
>>>>> v2: fix bug in find_remove_block()
>>>>>     fix whitespace warning at EOF
>>>>>
>>>>> This patchset introduces a new memory allocator for persistent
>>>>> pages for zcache.  The current allocator is xvmalloc.  xvmalloc
>>>>> has two notable limitations:
>>>>> * High (up to 50%) external fragmentation on allocation sets > PAGE_SIZE/2
>>>>> * No compaction support which reduces page reclaimation
>>>>
>>>> I need some acks from other zcache developers before I can accept this.
>>>>
>>>
>>> First, thanks for this new allocator; xvmalloc badly needed a replacement :)
>>>
>>
>> Hey Nitin, I hope your internship went well :)  It's good to hear from you.
>>
> 
> 
> Yes, it went well and now I can spend more time on this project :)
> 
> 
>>> I went through xcfmalloc in detail and would be posting detailed
>>> comments tomorrow.  In general, it seems to be quite similar to the
>>> "chunk based" allocator used in initial implementation of "compcache" --
>>> please see section 2.3.1 in this paper:
>>> http://www.linuxsymposium.org/archives/OLS/Reprints-2007/briglia-Reprint.pdf
>>>
>>
>> Ah, indeed they look similar.  I didn't know that this approach
>> had already been done before in the history of this project.
>>
>>> I'm really looking forward to a slab based allocator as I mentioned in
>>> the initial mail:
>>> http://permalink.gmane.org/gmane.linux.kernel.mm/65467
>>>
>>> With the current design xcfmalloc suffers from issues similar to the
>>> allocator described in the paper:
>>>  - High metadata overhead
>>>  - Difficult implementation of compaction
>>>  - Need for extra memcpy()s  etc.
>>>
>>> With slab based approach, we can almost eliminate any metadata overhead,
>>> remove any free chunk merging logic, simplify compaction and so on.
>>>
>>
>> Just to align my understanding with yours, when I hear slab-based,
>> I'm thinking each page in the compressed memory pool will contain
>> 1 or more blocks that are all the same size.  Is this what you mean?
>>
> 
> 
> Yes, exactly.  The memory pool will consist of "superblocks" (typically
> 16K or 64K).

A fixed superblock size would be an issue.  If you have a fixed superblock
size of 64k on a system that has 64k hardware pages, then we'll find 
ourselves in the same fragmentation mess as xvmalloc.  It needs to be 
relative to the hardware page size; say 4*PAGE_SIZE or 8*PAGE_SIZE.

> Each of these superblocks will contain objects of only one
> particular size (which is its size class).  This is the general
> structure of all slab allocators. In particular, I'm planning to use
> many of the ideas discussed in this paper:
> http://www.cs.umass.edu/~emery/hoard/asplos2000.pdf
> 
> One major point to consider would be that these superblocks cannot be
> physically contiguous in our case, so we will have to do some map/unmap
> trickery.

I assume you mean vm_map_ram() by "trickery".

In my own experiments, I can tell you that vm_map_ram() is VERY expensive
wrt kmap_atomic().  I made a version of xvmalloc (affectionately called
"chunky xvmalloc") where I modified grow_pool() to allocate 4 0-order pages,
if it could, and group them into a "chunk" (what you are calling a
"superblock").  The first page in the chunk had a chunk header that contained
the array of page pointers that vm_map_ram() expects.  A block was 
identified by a page pointer to the first page in the chunk, and an offset
within the mapped area of the chunk.

It... was... slow...

Additionally, vm_map_ram() failed a lot because it actually allocates
memory of its own for the vmap_area.  In my tests, many pages slipped
through zcache because of this failure.

Even worse, it uses GFP_KERNEL when alloc'ing the vmap_area which 
isn't safe under spinlock.

It seems that the use of vm_map_ram() is a linchpin in this design.

> The basic idea is to link together individual pages
> (typically 4k) using underlying struct_page->lru to form superblocks and
> map/unmap objects on demand.
> 
>> If so, I'm not sure how changing to a slab-based system would eliminate
>> metadata overhead or do away with memcpy()s.
>>
> 
> 
> With slab based approach, the allocator itself need not store any
> metadata with allocated objects.  However, considering zcache and zram
> use-cases, the caller will still have to request additional space for
> per-object header: actual object size and back-reference (which
> inode/page-idx this object belongs to) needed for compaction.
> 

So the metadata still exists.  It's just zcache's metadata vs the
allocator's metadata.

> For free-list management, the underlying struct page and the free object
> space itself can be used. Some field in the struct page can point to the
> first free object in a page and free slab objects themselves will
> contain links to next/previous free objects in the page.
> 
>> The memcpy()s are a side effect of having an allocation spread over
>> blocks in different pages.  I'm not seeing a way around this.
>>
> 
> 
> For slab objects than span 2 pages, we can use vm_map_ram() to
> temporarily map pages involved and read/write to objects directly. For
> objects lying entirely within a page, we can use much faster
> kmap_atomic() for access.
> 
> 

See previous comment about vm_map_ram().  There is also an issue
here with a slab object being unreadable do to vm_map_ram() failing.

>> It also follows that the blocks that make up an allocation must be in
>> a list of some kind, leading to some amount of metadata overhead.
>>
> 
> 
> Used objects need not be placed in any list.  For free objects we can use
> underlying struct page and free object space itself to manage free list,
> as described above.
> 

I assume this means that allocations consist of only one slab object as
opposed to multiple objects in slabs with different class sizes.

In other words, if you have a 3k allocation and your slab
class sizes are 1k, 2k, and 4k, the allocation would have to
be in a single 4k object (with 25% fragmentation), not spanning
a 1k and 2k object, correct?

This is something that I'm inferring from your description, but is key
to the design.  Please confirm that I'm understanding correctly.

>> If you want to do compaction, it follows that you can't give the user
>> a direct pointer to the data, since the location of that data may change.
>> In this case, an indirection layer is required (i.e. xcf_blkdesc and
>> xcf_read()/xcf_write()).
>>
> 
> 
> Yes, we can't give a direct pointer anyways since pages used by the
> allocator are not permanently mapped (to save precious VA spave on
> 32-bit).  Still, we can save on much of metadata overhead and extra
> memcpy() as described above.
> 
> 

This isn't clear to me.  What would be returned by the malloc() call
in this design?  In other words, how does the caller access the
allocation?  You just said we can't give a direct access to the data
via a page pointer and an offset. What else is there to return other
than a pointer to metadata?

>> The only part of the metadata that could be done away with in a slab-
>> based approach, as far as I can see, is the prevoffset field in xcf_blkhdr,
>> since the size of the previous block in the page (or the previous object
>> in the slab) can be inferred from the size of the current block/object.
>>
>> I do agree that we don't have to worry about free block merging in a
>> slab-based system.
>>
>> I didn't implement compaction so a slab-based system could very well
>> make it easier.  I guess it depends on how one ends up doing it.
>>
> 
> 
> I expect compaction to be much easier with slab like design since
> finding target for relocating objects is so simple. You don't have to
> deal with all those little unusable holes created throughout the heap
> when mix-all-object-sizes-together approach is used.
> 
> 
> For compaction, I plan to have a scheme where the user (zcache/zram)
> would "cooperate" with the process.  Here is a rough outline for
> relocating an object:
>  - For any size class, when emptiness threshold (=total space allocated
> / actual used) exceeds some threshold, the allocator will copy objects
> from least used slab superblocks to the most used ones.
>  - It will then issue a callback, registered by the user during pool
> creation, informing about the new object location,
>  - Due to various cases, this callback may return failure in which case
> the relocation is considered failed and we will disk newly created copy.
>  - If callback succeeds, it means that the user successfully updated its
> object reference and we can now mark the original copy as free.
> 
> 
> We can also batch this process (copy all objects in victim superblock at
> once to other superblocks and issue a single callback) for better
> efficiency.
> 
> 
> Please let me know if you have any comments. I plan to start with its
> implementation sometime this week.
> 
> Thanks,
> Nitin

--
Seth

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel


[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux