[PATCH] Staging: comedi: fix printk warning issue in cb_pcidas64.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ravishankar <ravi.shankar@xxxxxxxxxxxxxxx>

This is a patch to the cb_pcidas64.c file that fixes up a printk warning found by the checkpatch.pl tool

Signed-off-by: Ravishankar <ravishankarkm32@xxxxxxxxx>
---
 drivers/staging/comedi/drivers/cb_pcidas64.c |   22 ++++++++--------------
 1 files changed, 8 insertions(+), 14 deletions(-)

diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c
index 1e32419..37a0402 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas64.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas64.c
@@ -1739,7 +1739,7 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	uint32_t local_range, local_decode;
 	int retval;
 
-	printk("comedi%d: cb_pcidas64\n", dev->minor);
+	pr_info("comedi%d: cb_pcidas64\n", dev->minor);
 
 /*
  * Allocate the private structure area.
@@ -1776,17 +1776,15 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	}
 
 	if (dev->board_ptr == NULL) {
-		printk
-		    ("No supported ComputerBoards/MeasurementComputing card found\n");
+		pr_warn("No supported ComputerBoards/MeasurementComputing card found\n");
 		return -EIO;
 	}
 
-	printk("Found %s on bus %i, slot %i\n", board(dev)->name,
-	       pcidev->bus->number, PCI_SLOT(pcidev->devfn));
+	pr_info("Found %s on bus %i, slot %i\n", board(dev)->name,
+			pcidev->bus->number, PCI_SLOT(pcidev->devfn));
 
 	if (comedi_pci_enable(pcidev, driver_cb_pcidas.driver_name)) {
-		printk(KERN_WARNING
-		       " failed to enable PCI device and request regions\n");
+		pr_warn(" failed to enable PCI device and request regions\n");
 		return -EIO;
 	}
 	pci_set_master(pcidev);
@@ -1813,10 +1811,8 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		    pci_resource_len(pcidev, DIO_COUNTER_BADDRINDEX));
 
 	if (!priv(dev)->plx9080_iobase || !priv(dev)->main_iobase
-	    || !priv(dev)->dio_counter_iobase) {
-		printk(" failed to remap io memory\n");
+			|| !priv(dev)->dio_counter_iobase)
 		return -ENOMEM;
-	}
 
 	DEBUG_PRINT(" plx9080 remapped to 0x%p\n", priv(dev)->plx9080_iobase);
 	DEBUG_PRINT(" main remapped to 0x%p\n", priv(dev)->main_iobase);
@@ -1850,17 +1846,15 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it)
 
 	priv(dev)->hw_revision =
 	    hw_revision(dev, readw(priv(dev)->main_iobase + HW_STATUS_REG));
-	printk(" stc hardware revision %i\n", priv(dev)->hw_revision);
 	init_plx9080(dev);
 	init_stc_registers(dev);
 	/*  get irq */
 	if (request_irq(pcidev->irq, handle_interrupt, IRQF_SHARED,
 			"cb_pcidas64", dev)) {
-		printk(" unable to allocate irq %u\n", pcidev->irq);
+		pr_warn(" unable to allocate irq %u\n", pcidev->irq);
 		return -EINVAL;
 	}
 	dev->irq = pcidev->irq;
-	printk(" irq %u\n", dev->irq);
 
 	retval = setup_subdevices(dev);
 	if (retval < 0)
@@ -1882,7 +1876,7 @@ static int detach(struct comedi_device *dev)
 {
 	unsigned int i;
 
-	printk("comedi%d: cb_pcidas: remove\n", dev->minor);
+	pr_info("comedi%d: cb_pcidas: remove\n", dev->minor);
 
 	if (dev->irq)
 		free_irq(dev->irq, dev);
-- 
1.7.6

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel


[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux