Hello, Some background: *** Computer: Compaq Mini CQ10 Running Debian Wheezy, kernel 3.0.0.1-686-pae Debian Bug report #637240 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=637240 *** Since upgrading to kernel 3.x, I'm facing a weird problem with my wireless adapter (BCM4313) and "brcmsmac" driver. The problems are as follows: 1/ When the computer starts there is no automatic association between the AP and the netbook. NetworkManager stays disconnected and shows not wifi networks available. 2/ Once I force a connection to a hidden AP, I can only get associated when sitting next (very near) to the AP. I am attaching the logs for both situations: a) When sitting next to the AP and computer starts (next_to_ap.txt) b) When sitting on the next room (next_room.txt) Kernel 2.6.39-2-686-pae was working fine. CC'ing to "devel@xxxxxxxxxxxxxxxxxxxx" mailing list and Broadcom maintainers. P.S. You can add me as CC for any response. Greetings, -- Camaleón
Aug 14 13:38:15 stt300 NetworkManager[1109]: <info> (wlan0): device state change: 8 -> 3 (reason 38) Aug 14 13:38:15 stt300 NetworkManager[1109]: <info> (wlan0): deactivating device (reason: 38). Aug 14 13:38:15 stt300 NetworkManager[1109]: <info> (wlan0): canceled DHCP transaction, DHCP client pid 2217 Aug 14 13:38:15 stt300 avahi-daemon[1155]: Withdrawing address record for 192.168.0.155 on wlan0. Aug 14 13:38:15 stt300 avahi-daemon[1155]: Leaving mDNS multicast group on interface wlan0.IPv4 with address 192.168.0.155. Aug 14 13:38:15 stt300 avahi-daemon[1155]: Interface wlan0.IPv4 no longer relevant for mDNS. Aug 14 13:38:15 stt300 kernel: [ 4281.489369] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement) Aug 14 13:38:15 stt300 kernel: [ 4281.501937] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement) Aug 14 13:38:15 stt300 kernel: [ 4281.502139] ieee80211 phy0: brcmsmac: wl_ops_bss_info_changed: disassociated Aug 14 13:38:15 stt300 kernel: [ 4281.502327] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled false, count 0 (implement) Aug 14 13:38:15 stt300 kernel: [ 4281.502560] wlan0: deauthenticating from 00:23:f8:9d:ad:11 by local choice (reason=3) Aug 14 13:38:15 stt300 dbus[1093]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) Aug 14 13:38:15 stt300 acpid: client 1153[0:0] has disconnected Aug 14 13:38:15 stt300 acpid: client connected from 2430[0:0] Aug 14 13:38:15 stt300 acpid: 1 client rule loaded Aug 14 13:38:15 stt300 dbus[1093]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Aug 14 13:38:15 stt300 kernel: [ 4281.560117] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: true (implement) Aug 14 13:38:15 stt300 kernel: [ 4281.563769] cfg80211: Calling CRDA to update world regulatory domain Aug 14 13:38:15 stt300 wpa_supplicant[1132]: CTRL-EVENT-DISCONNECTED bssid=00:00:00:00:00:00 reason=0 Aug 14 13:38:15 stt300 kernel: [ 4281.582186] cfg80211: World regulatory domain updated: Aug 14 13:38:15 stt300 kernel: [ 4281.582194] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Aug 14 13:38:15 stt300 kernel: [ 4281.582202] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 13:38:15 stt300 kernel: [ 4281.582208] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Aug 14 13:38:15 stt300 kernel: [ 4281.582214] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Aug 14 13:38:15 stt300 kernel: [ 4281.582221] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 13:38:15 stt300 kernel: [ 4281.582227] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 13:38:15 stt300 kernel: [ 4281.582257] cfg80211: Calling CRDA for country: EU Aug 14 13:38:15 stt300 kernel: [ 4281.594818] cfg80211: Regulatory domain changed to country: EU Aug 14 13:38:15 stt300 kernel: [ 4281.594826] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Aug 14 13:38:15 stt300 kernel: [ 4281.594833] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) Aug 14 13:38:15 stt300 kernel: [ 4281.594839] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) Aug 14 13:38:15 stt300 kernel: [ 4281.594845] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) Aug 14 13:38:15 stt300 kernel: [ 4281.594851] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) Aug 14 13:38:15 stt300 init: Switching to runlevel: 0 Aug 14 13:38:16 stt300 bluetoothd[1167]: Stopping SDP server Aug 14 13:38:16 stt300 bluetoothd[1167]: Exit Aug 14 13:38:17 stt300 NetworkManager[1109]: <info> caught signal 15, shutting down normally. Aug 14 13:38:17 stt300 NetworkManager[1109]: <warn> quit request received, terminating... Aug 14 13:38:17 stt300 NetworkManager[1109]: <info> (eth0): now unmanaged Aug 14 13:38:17 stt300 NetworkManager[1109]: <info> (eth0): device state change: 2 -> 1 (reason 36) Aug 14 13:38:17 stt300 NetworkManager[1109]: <info> (eth0): cleaning up... Aug 14 13:38:17 stt300 NetworkManager[1109]: <info> (eth0): taking down device. Aug 14 13:38:17 stt300 NetworkManager[1109]: <info> (wlan0): now unmanaged Aug 14 13:38:17 stt300 NetworkManager[1109]: <info> (wlan0): device state change: 3 -> 1 (reason 36) Aug 14 13:38:17 stt300 NetworkManager[1109]: <info> (wlan0): cleaning up... Aug 14 13:38:17 stt300 NetworkManager[1109]: <info> (wlan0): taking down device. Aug 14 13:38:17 stt300 avahi-daemon[1155]: Got SIGTERM, quitting. Aug 14 13:38:17 stt300 avahi-daemon[1155]: Leaving mDNS multicast group on interface wlan0.IPv6 with address fe80::ae81:12ff:fe34:6963. Aug 14 13:38:17 stt300 NetworkManager[1109]: <info> exiting (success) Aug 14 13:38:17 stt300 avahi-daemon[1155]: avahi-daemon 0.6.30 exiting. Aug 14 13:38:18 stt300 nm-dispatcher.action: Caught signal 15, shutting down... Aug 14 13:38:18 stt300 acpid: exiting Aug 14 13:38:18 stt300 modem-manager[1118]: <info> Caught signal 15, shutting down... Aug 14 13:38:19 stt300 kernel: Kernel logging (proc) stopped. Aug 14 13:38:19 stt300 rsyslogd: [origin software="rsyslogd" swVersion="5.8.3" x-pid="1023" x-info="http://www.rsyslog.com";] exiting on signal 15. Aug 14 13:39:00 stt300 kernel: imklog 5.8.3, log source = /proc/kmsg started. Aug 14 13:39:00 stt300 rsyslogd: [origin software="rsyslogd" swVersion="5.8.3" x-pid="1136" x-info="http://www.rsyslog.com";] start Aug 14 13:39:00 stt300 kernel: [ 0.000000] Initializing cgroup subsys cpuset Aug 14 13:39:00 stt300 kernel: [ 0.000000] Initializing cgroup subsys cpu Aug 14 13:39:00 stt300 kernel: [ 0.000000] Linux version 3.0.0-1-686-pae (Debian 3.0.0-1) (ben@xxxxxxxxxxxxxxx) (gcc version 4.5.3 (Debian 4.5.3-3) ) #1 SMP Sun Jul 24 14:27:32 UTC 2011 Aug 14 13:39:00 stt300 kernel: [ 0.000000] Disabled fast string operations Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-provided physical RAM map: Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f43f000 (usable) Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820: 000000007f43f000 - 000000007f4bf000 (reserved) Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820: 000000007f4bf000 - 000000007f5bf000 (ACPI NVS) Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820: 000000007f5bf000 - 000000007f5f7000 (ACPI data) Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820: 000000007f5f7000 - 000000007f600000 (usable) Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820: 000000007f600000 - 0000000080000000 (reserved) Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) Aug 14 13:39:00 stt300 kernel: [ 0.000000] NX (Execute Disable) protection: active Aug 14 13:39:00 stt300 kernel: [ 0.000000] DMI 2.6 present. Aug 14 13:39:00 stt300 kernel: [ 0.000000] DMI: Hewlett-Packard Compaq Mini CQ10-500 /148A, BIOS F.14 11/12/2010 Aug 14 13:39:00 stt300 kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) Aug 14 13:39:00 stt300 kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Aug 14 13:39:00 stt300 kernel: [ 0.000000] last_pfn = 0x7f600 max_arch_pfn = 0x1000000 Aug 14 13:39:00 stt300 kernel: [ 0.000000] MTRR default type: uncachable Aug 14 13:39:00 stt300 kernel: [ 0.000000] MTRR fixed ranges enabled: Aug 14 13:39:00 stt300 kernel: [ 0.000000] 00000-9FFFF write-back Aug 14 13:39:00 stt300 kernel: [ 0.000000] A0000-BFFFF uncachable Aug 14 13:39:00 stt300 kernel: [ 0.000000] C0000-FFFFF write-protect Aug 14 13:39:00 stt300 kernel: [ 0.000000] MTRR variable ranges enabled: Aug 14 13:39:00 stt300 kernel: [ 0.000000] 0 base 0FFE00000 mask 0FFE00000 write-protect Aug 14 13:39:00 stt300 kernel: [ 0.000000] 1 base 000000000 mask 0C0000000 write-back Aug 14 13:39:00 stt300 kernel: [ 0.000000] 2 base 040000000 mask 0C0000000 write-back Aug 14 13:39:00 stt300 kernel: [ 0.000000] 3 base 07F800000 mask 0FF800000 uncachable Aug 14 13:39:00 stt300 kernel: [ 0.000000] 4 disabled Aug 14 13:39:00 stt300 kernel: [ 0.000000] 5 disabled Aug 14 13:39:00 stt300 kernel: [ 0.000000] 6 disabled Aug 14 13:39:00 stt300 kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Aug 14 13:39:00 stt300 kernel: [ 0.000000] initial memory mapped : 0 - 01a00000 Aug 14 13:39:00 stt300 kernel: [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 Aug 14 13:39:00 stt300 kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 Aug 14 13:39:00 stt300 kernel: [ 0.000000] 0000000000 - 0000200000 page 4k Aug 14 13:39:00 stt300 kernel: [ 0.000000] 0000200000 - 0037800000 page 2M Aug 14 13:39:00 stt300 kernel: [ 0.000000] 0037800000 - 00379fe000 page 4k Aug 14 13:39:00 stt300 kernel: [ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000 Aug 14 13:39:00 stt300 kernel: [ 0.000000] RAMDISK: 37b6a000 - 37dad000 Aug 14 13:39:00 stt300 kernel: [ 0.000000] Allocated new RAMDISK: 377bb000 - 379fd217 Aug 14 13:39:00 stt300 kernel: [ 0.000000] Move RAMDISK from 0000000037b6a000 - 0000000037dac216 to 377bb000 - 379fd216 Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 HP ) Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: XSDT 7f5f6120 00074 (v01 HPQOEM SLIC-MPC 00000001 01000013) Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: FACP 7f5f5000 000F4 (v04 HP SLIC-MPC 00000001 MSFT 01000013) Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: DSDT 7f5e6000 0BA96 (v01 HP SLIC-MPC 00000001 MSFT 01000013) Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: FACS 7f589000 00040 Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: HPET 7f5f4000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: APIC 7f5f3000 00078 (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013) Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: MCFG 7f5f2000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: SLIC 7f5e5000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: BOOT 7f5e4000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: SSDT 7f5e3000 004C4 (v02 PmRef CpuPm 00003000 INTL 20051117) Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: SSDT 7f5e2000 001F7 (v02 PmRef Cpu0Tst 00003000 INTL 20051117) Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: SSDT 7f5e1000 00064 (v02 PmRef Cpu1Tst 00003000 INTL 20051117) Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: WDAT 7f5e0000 00194 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Aug 14 13:39:00 stt300 kernel: [ 0.000000] 1148MB HIGHMEM available. Aug 14 13:39:00 stt300 kernel: [ 0.000000] 889MB LOWMEM available. Aug 14 13:39:00 stt300 kernel: [ 0.000000] mapped low ram: 0 - 379fe000 Aug 14 13:39:00 stt300 kernel: [ 0.000000] low ram: 0 - 379fe000 Aug 14 13:39:00 stt300 kernel: [ 0.000000] Zone PFN ranges: Aug 14 13:39:00 stt300 kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Aug 14 13:39:00 stt300 kernel: [ 0.000000] Normal 0x00001000 -> 0x000379fe Aug 14 13:39:00 stt300 kernel: [ 0.000000] HighMem 0x000379fe -> 0x0007f600 Aug 14 13:39:00 stt300 kernel: [ 0.000000] Movable zone start PFN for each node Aug 14 13:39:00 stt300 kernel: [ 0.000000] early_node_map[3] active PFN ranges Aug 14 13:39:00 stt300 kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f Aug 14 13:39:00 stt300 kernel: [ 0.000000] 0: 0x00000100 -> 0x0007f43f Aug 14 13:39:00 stt300 kernel: [ 0.000000] 0: 0x0007f5f7 -> 0x0007f600 Aug 14 13:39:00 stt300 kernel: [ 0.000000] On node 0 totalpages: 521175 Aug 14 13:39:00 stt300 kernel: [ 0.000000] free_area_init_node: node 0, pgdat c141c980, node_mem_map f67ca200 Aug 14 13:39:00 stt300 kernel: [ 0.000000] DMA zone: 32 pages used for memmap Aug 14 13:39:00 stt300 kernel: [ 0.000000] DMA zone: 0 pages reserved Aug 14 13:39:00 stt300 kernel: [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 Aug 14 13:39:00 stt300 kernel: [ 0.000000] Normal zone: 1748 pages used for memmap Aug 14 13:39:00 stt300 kernel: [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 Aug 14 13:39:00 stt300 kernel: [ 0.000000] HighMem zone: 2297 pages used for memmap Aug 14 13:39:00 stt300 kernel: [ 0.000000] HighMem zone: 291153 pages, LIFO batch:31 Aug 14 13:39:00 stt300 kernel: [ 0.000000] Using APIC driver default Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408 Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) Aug 14 13:39:00 stt300 kernel: [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: IRQ0 used by override. Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: IRQ2 used by override. Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: IRQ9 used by override. Aug 14 13:39:00 stt300 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Aug 14 13:39:00 stt300 kernel: [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs Aug 14 13:39:00 stt300 kernel: [ 0.000000] nr_irqs_gsi: 40 Aug 14 13:39:00 stt300 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Aug 14 13:39:00 stt300 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Aug 14 13:39:00 stt300 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Aug 14 13:39:00 stt300 kernel: [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) Aug 14 13:39:00 stt300 kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware Aug 14 13:39:00 stt300 kernel: [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 Aug 14 13:39:00 stt300 kernel: [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6400000 s28864 r0 d24384 u524288 Aug 14 13:39:00 stt300 kernel: [ 0.000000] pcpu-alloc: s28864 r0 d24384 u524288 alloc=1*2097152 Aug 14 13:39:00 stt300 kernel: [ 0.000000] pcpu-alloc: [0] 0 1 2 3 Aug 14 13:39:00 stt300 kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517098 Aug 14 13:39:00 stt300 kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-686-pae root=UUID=ef88aa1c-5071-41ac-8884-6c991eca9b22 ro quiet Aug 14 13:39:00 stt300 kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) Aug 14 13:39:00 stt300 kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Aug 14 13:39:00 stt300 kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Aug 14 13:39:00 stt300 kernel: [ 0.000000] Initializing CPU#0 Aug 14 13:39:00 stt300 kernel: [ 0.000000] Initializing HighMem for node 0 (000379fe:0007f600) Aug 14 13:39:00 stt300 kernel: [ 0.000000] Memory: 2059732k/2086912k available (2764k kernel code, 24968k reserved, 1474k data, 404k init, 1173800k highmem) Aug 14 13:39:00 stt300 kernel: [ 0.000000] virtual kernel memory layout: Aug 14 13:39:00 stt300 kernel: [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB) Aug 14 13:39:00 stt300 kernel: [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) Aug 14 13:39:00 stt300 kernel: [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) Aug 14 13:39:00 stt300 kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) Aug 14 13:39:00 stt300 kernel: [ 0.000000] .init : 0xc1424000 - 0xc1489000 ( 404 kB) Aug 14 13:39:00 stt300 kernel: [ 0.000000] .data : 0xc12b326c - 0xc1423b80 (1474 kB) Aug 14 13:39:00 stt300 kernel: [ 0.000000] .text : 0xc1000000 - 0xc12b326c (2764 kB) Aug 14 13:39:00 stt300 kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Aug 14 13:39:00 stt300 kernel: [ 0.000000] Hierarchical RCU implementation. Aug 14 13:39:00 stt300 kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. Aug 14 13:39:00 stt300 kernel: [ 0.000000] NR_IRQS:1280 Aug 14 13:39:00 stt300 kernel: [ 0.000000] CPU 0 irqstacks, hard=f600c000 soft=f600e000 Aug 14 13:39:00 stt300 kernel: [ 0.000000] Console: colour VGA+ 80x25 Aug 14 13:39:00 stt300 kernel: [ 0.000000] console [tty0] enabled Aug 14 13:39:00 stt300 kernel: [ 0.000000] hpet clockevent registered Aug 14 13:39:00 stt300 kernel: [ 0.000000] Fast TSC calibration using PIT Aug 14 13:39:00 stt300 kernel: [ 0.000000] Detected 1662.521 MHz processor. Aug 14 13:39:00 stt300 kernel: [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.04 BogoMIPS (lpj=6650084) Aug 14 13:39:00 stt300 kernel: [ 0.004015] pid_max: default: 32768 minimum: 301 Aug 14 13:39:00 stt300 kernel: [ 0.004124] Security Framework initialized Aug 14 13:39:00 stt300 kernel: [ 0.004132] SELinux: Disabled at boot. Aug 14 13:39:00 stt300 kernel: [ 0.004183] Mount-cache hash table entries: 512 Aug 14 13:39:00 stt300 kernel: [ 0.004712] Initializing cgroup subsys cpuacct Aug 14 13:39:00 stt300 kernel: [ 0.004761] Initializing cgroup subsys memory Aug 14 13:39:00 stt300 kernel: [ 0.004792] Initializing cgroup subsys devices Aug 14 13:39:00 stt300 kernel: [ 0.004798] Initializing cgroup subsys freezer Aug 14 13:39:00 stt300 kernel: [ 0.004803] Initializing cgroup subsys net_cls Aug 14 13:39:00 stt300 kernel: [ 0.004808] Initializing cgroup subsys blkio Aug 14 13:39:00 stt300 kernel: [ 0.004869] Disabled fast string operations Aug 14 13:39:00 stt300 kernel: [ 0.004878] CPU: Physical Processor ID: 0 Aug 14 13:39:00 stt300 kernel: [ 0.004882] CPU: Processor Core ID: 0 Aug 14 13:39:00 stt300 kernel: [ 0.004887] mce: CPU supports 5 MCE banks Aug 14 13:39:00 stt300 kernel: [ 0.004898] CPU0: Thermal monitoring handled by SMI Aug 14 13:39:00 stt300 kernel: [ 0.004906] using mwait in idle threads. Aug 14 13:39:00 stt300 kernel: [ 0.005422] ACPI: Core revision 20110413 Aug 14 13:39:00 stt300 kernel: [ 0.020112] Enabling APIC mode: Flat. Using 1 I/O APICs Aug 14 13:39:00 stt300 kernel: [ 0.020524] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Aug 14 13:39:00 stt300 kernel: [ 0.060356] CPU0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz stepping 0a Aug 14 13:39:00 stt300 kernel: [ 0.064003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver. Aug 14 13:39:00 stt300 kernel: [ 0.064003] ... version: 3 Aug 14 13:39:00 stt300 kernel: [ 0.064003] ... bit width: 40 Aug 14 13:39:00 stt300 kernel: [ 0.064003] ... generic registers: 2 Aug 14 13:39:00 stt300 kernel: [ 0.064003] ... value mask: 000000ffffffffff Aug 14 13:39:00 stt300 kernel: [ 0.064003] ... max period: 000000007fffffff Aug 14 13:39:00 stt300 kernel: [ 0.064003] ... fixed-purpose events: 3 Aug 14 13:39:00 stt300 kernel: [ 0.064003] ... event mask: 0000000700000003 Aug 14 13:39:00 stt300 kernel: [ 0.064003] NMI watchdog enabled, takes one hw-pmu counter. Aug 14 13:39:00 stt300 kernel: [ 0.064003] CPU 1 irqstacks, hard=f60f4000 soft=f60f6000 Aug 14 13:39:00 stt300 kernel: [ 0.064003] Booting Node 0, Processors #1 Aug 14 13:39:00 stt300 kernel: [ 0.064003] smpboot cpu 1: start_ip = 9b000 Aug 14 13:39:00 stt300 kernel: [ 0.008000] Initializing CPU#1 Aug 14 13:39:00 stt300 kernel: [ 0.008000] Disabled fast string operations Aug 14 13:39:00 stt300 kernel: [ 0.008000] CPU1: Thermal monitoring handled by SMI Aug 14 13:39:00 stt300 kernel: [ 0.156062] NMI watchdog enabled, takes one hw-pmu counter. Aug 14 13:39:00 stt300 kernel: [ 0.156137] Brought up 2 CPUs Aug 14 13:39:00 stt300 kernel: [ 0.156145] Total of 2 processors activated (6650.35 BogoMIPS). Aug 14 13:39:00 stt300 kernel: [ 0.156871] devtmpfs: initialized Aug 14 13:39:00 stt300 kernel: [ 0.156871] PM: Registering ACPI NVS region at 7f4bf000 (1048576 bytes) Aug 14 13:39:00 stt300 kernel: [ 0.156871] print_constraints: dummy: Aug 14 13:39:00 stt300 kernel: [ 0.156871] NET: Registered protocol family 16 Aug 14 13:39:00 stt300 kernel: [ 0.156922] ACPI: bus type pci registered Aug 14 13:39:00 stt300 kernel: [ 0.157192] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) Aug 14 13:39:00 stt300 kernel: [ 0.157200] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 Aug 14 13:39:00 stt300 kernel: [ 0.157205] PCI: Using MMCONFIG for extended config space Aug 14 13:39:00 stt300 kernel: [ 0.157209] PCI: Using configuration type 1 for base access Aug 14 13:39:00 stt300 kernel: [ 0.160124] bio: create slab <bio-0> at 0 Aug 14 13:39:00 stt300 kernel: [ 0.163201] ACPI: EC: Look up EC in DSDT Aug 14 13:39:00 stt300 kernel: [ 0.166766] ACPI: Executed 1 blocks of module-level executable AML code Aug 14 13:39:00 stt300 kernel: [ 0.171137] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored Aug 14 13:39:00 stt300 kernel: [ 0.172142] ACPI: SSDT 7f494c98 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117) Aug 14 13:39:00 stt300 kernel: [ 0.172944] ACPI: Dynamic OEM Table Load: Aug 14 13:39:00 stt300 kernel: [ 0.172952] ACPI: SSDT (null) 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117) Aug 14 13:39:00 stt300 kernel: [ 0.173258] ACPI: SSDT 7f493e18 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117) Aug 14 13:39:00 stt300 kernel: [ 0.174011] ACPI: Dynamic OEM Table Load: Aug 14 13:39:00 stt300 kernel: [ 0.174018] ACPI: SSDT (null) 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117) Aug 14 13:39:00 stt300 kernel: [ 0.196656] ACPI: SSDT 7f494f18 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117) Aug 14 13:39:00 stt300 kernel: [ 0.197434] ACPI: Dynamic OEM Table Load: Aug 14 13:39:00 stt300 kernel: [ 0.197442] ACPI: SSDT (null) 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117) Aug 14 13:39:00 stt300 kernel: [ 0.197718] ACPI: SSDT 7f492f18 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117) Aug 14 13:39:00 stt300 kernel: [ 0.198473] ACPI: Dynamic OEM Table Load: Aug 14 13:39:00 stt300 kernel: [ 0.198479] ACPI: SSDT (null) 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117) Aug 14 13:39:00 stt300 kernel: [ 0.524473] ACPI: Interpreter enabled Aug 14 13:39:00 stt300 kernel: [ 0.524485] ACPI: (supports S0 S3 S4 S5) Aug 14 13:39:00 stt300 kernel: [ 0.524549] ACPI: Using IOAPIC for interrupt routing Aug 14 13:39:00 stt300 kernel: [ 0.538349] ACPI: Power Resource [FN00] (on) Aug 14 13:39:00 stt300 kernel: [ 0.539118] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 Aug 14 13:39:00 stt300 kernel: [ 0.539485] ACPI: No dock devices found. Aug 14 13:39:00 stt300 kernel: [ 0.539491] HEST: Table not found. Aug 14 13:39:00 stt300 kernel: [ 0.539499] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug Aug 14 13:39:00 stt300 kernel: [ 0.540516] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110413/nspredef-352) Aug 14 13:39:00 stt300 kernel: [ 0.540535] \_SB_.PCI0:_OSC evaluation returned wrong type Aug 14 13:39:00 stt300 kernel: [ 0.540539] _OSC request data:1 8 1f Aug 14 13:39:00 stt300 kernel: [ 0.540550] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) Aug 14 13:39:00 stt300 kernel: [ 0.542233] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] Aug 14 13:39:00 stt300 kernel: [ 0.542241] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] Aug 14 13:39:00 stt300 kernel: [ 0.542248] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] Aug 14 13:39:00 stt300 kernel: [ 0.542256] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] Aug 14 13:39:00 stt300 kernel: [ 0.542284] pci 0000:00:00.0: [8086:a010] type 0 class 0x000600 Aug 14 13:39:00 stt300 kernel: [ 0.542346] pci 0000:00:02.0: [8086:a011] type 0 class 0x000300 Aug 14 13:39:00 stt300 kernel: [ 0.542362] pci 0000:00:02.0: reg 10: [mem 0x94180000-0x941fffff] Aug 14 13:39:00 stt300 kernel: [ 0.542372] pci 0000:00:02.0: reg 14: [io 0x30c0-0x30c7] Aug 14 13:39:00 stt300 kernel: [ 0.542383] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff pref] Aug 14 13:39:00 stt300 kernel: [ 0.542393] pci 0000:00:02.0: reg 1c: [mem 0x94000000-0x940fffff] Aug 14 13:39:00 stt300 kernel: [ 0.542439] pci 0000:00:02.1: [8086:a012] type 0 class 0x000380 Aug 14 13:39:00 stt300 kernel: [ 0.542453] pci 0000:00:02.1: reg 10: [mem 0x94100000-0x9417ffff] Aug 14 13:39:00 stt300 kernel: [ 0.542566] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403 Aug 14 13:39:00 stt300 kernel: [ 0.542595] pci 0000:00:1b.0: reg 10: [mem 0x94200000-0x94203fff 64bit] Aug 14 13:39:00 stt300 kernel: [ 0.542682] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Aug 14 13:39:00 stt300 kernel: [ 0.542691] pci 0000:00:1b.0: PME# disabled Aug 14 13:39:00 stt300 kernel: [ 0.542729] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604 Aug 14 13:39:00 stt300 kernel: [ 0.542823] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Aug 14 13:39:00 stt300 kernel: [ 0.542831] pci 0000:00:1c.0: PME# disabled Aug 14 13:39:00 stt300 kernel: [ 0.542874] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604 Aug 14 13:39:00 stt300 kernel: [ 0.542966] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold Aug 14 13:39:00 stt300 kernel: [ 0.542974] pci 0000:00:1c.1: PME# disabled Aug 14 13:39:00 stt300 kernel: [ 0.543018] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03 Aug 14 13:39:00 stt300 kernel: [ 0.543080] pci 0000:00:1d.0: reg 20: [io 0x3080-0x309f] Aug 14 13:39:00 stt300 kernel: [ 0.543134] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03 Aug 14 13:39:00 stt300 kernel: [ 0.543196] pci 0000:00:1d.1: reg 20: [io 0x3060-0x307f] Aug 14 13:39:00 stt300 kernel: [ 0.543247] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03 Aug 14 13:39:00 stt300 kernel: [ 0.543309] pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f] Aug 14 13:39:00 stt300 kernel: [ 0.543362] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03 Aug 14 13:39:00 stt300 kernel: [ 0.543425] pci 0000:00:1d.3: reg 20: [io 0x3020-0x303f] Aug 14 13:39:00 stt300 kernel: [ 0.543490] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03 Aug 14 13:39:00 stt300 kernel: [ 0.543490] pci 0000:00:1d.7: reg 10: [mem 0x94204400-0x942047ff] Aug 14 13:39:00 stt300 kernel: [ 0.548076] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Aug 14 13:39:00 stt300 kernel: [ 0.548086] pci 0000:00:1d.7: PME# disabled Aug 14 13:39:00 stt300 kernel: [ 0.548127] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 Aug 14 13:39:00 stt300 kernel: [ 0.548220] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601 Aug 14 13:39:00 stt300 kernel: [ 0.548388] pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106 Aug 14 13:39:00 stt300 kernel: [ 0.548417] pci 0000:00:1f.2: reg 10: [io 0x30b8-0x30bf] Aug 14 13:39:00 stt300 kernel: [ 0.548434] pci 0000:00:1f.2: reg 14: [io 0x30cc-0x30cf] Aug 14 13:39:00 stt300 kernel: [ 0.548450] pci 0000:00:1f.2: reg 18: [io 0x30b0-0x30b7] Aug 14 13:39:00 stt300 kernel: [ 0.548466] pci 0000:00:1f.2: reg 1c: [io 0x30c8-0x30cb] Aug 14 13:39:00 stt300 kernel: [ 0.548481] pci 0000:00:1f.2: reg 20: [io 0x30a0-0x30af] Aug 14 13:39:00 stt300 kernel: [ 0.548497] pci 0000:00:1f.2: reg 24: [mem 0x94204000-0x942043ff] Aug 14 13:39:00 stt300 kernel: [ 0.548539] pci 0000:00:1f.2: PME# supported from D3hot Aug 14 13:39:00 stt300 kernel: [ 0.548547] pci 0000:00:1f.2: PME# disabled Aug 14 13:39:00 stt300 kernel: [ 0.548575] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05 Aug 14 13:39:00 stt300 kernel: [ 0.548651] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f] Aug 14 13:39:00 stt300 kernel: [ 0.548840] pci 0000:01:00.0: [10ec:8136] type 0 class 0x000200 Aug 14 13:39:00 stt300 kernel: [ 0.548910] pci 0000:01:00.0: reg 10: [io 0x2000-0x20ff] Aug 14 13:39:00 stt300 kernel: [ 0.549028] pci 0000:01:00.0: reg 18: [mem 0x90004000-0x90004fff 64bit pref] Aug 14 13:39:00 stt300 kernel: [ 0.549103] pci 0000:01:00.0: reg 20: [mem 0x90000000-0x90003fff 64bit pref] Aug 14 13:39:00 stt300 kernel: [ 0.549299] pci 0000:01:00.0: supports D1 D2 Aug 14 13:39:00 stt300 kernel: [ 0.549304] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold Aug 14 13:39:00 stt300 kernel: [ 0.549322] pci 0000:01:00.0: PME# disabled Aug 14 13:39:00 stt300 kernel: [ 0.549489] pci 0000:01:00.1: [10ec:5288] type 0 class 0x00ff00 Aug 14 13:39:00 stt300 kernel: [ 0.549557] pci 0000:01:00.1: reg 10: [mem 0x93000000-0x9300ffff] Aug 14 13:39:00 stt300 kernel: [ 0.549973] pci 0000:01:00.1: supports D1 D2 Aug 14 13:39:00 stt300 kernel: [ 0.549978] pci 0000:01:00.1: PME# supported from D1 D2 D3hot D3cold Aug 14 13:39:00 stt300 kernel: [ 0.549996] pci 0000:01:00.1: PME# disabled Aug 14 13:39:00 stt300 kernel: [ 0.550216] pci 0000:00:1c.0: PCI bridge to [bus 01-01] Aug 14 13:39:00 stt300 kernel: [ 0.550224] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] Aug 14 13:39:00 stt300 kernel: [ 0.550233] pci 0000:00:1c.0: bridge window [mem 0x93000000-0x93ffffff] Aug 14 13:39:00 stt300 kernel: [ 0.550246] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref] Aug 14 13:39:00 stt300 kernel: [ 0.550356] pci 0000:02:00.0: [14e4:4727] type 0 class 0x000280 Aug 14 13:39:00 stt300 kernel: [ 0.550405] pci 0000:02:00.0: reg 10: [mem 0x92000000-0x92003fff 64bit] Aug 14 13:39:00 stt300 kernel: [ 0.550588] pci 0000:02:00.0: supports D1 D2 Aug 14 13:39:00 stt300 kernel: [ 0.556069] pci 0000:00:1c.1: PCI bridge to [bus 02-02] Aug 14 13:39:00 stt300 kernel: [ 0.556079] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] Aug 14 13:39:00 stt300 kernel: [ 0.556088] pci 0000:00:1c.1: bridge window [mem 0x92000000-0x92ffffff] Aug 14 13:39:00 stt300 kernel: [ 0.556100] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff 64bit pref] Aug 14 13:39:00 stt300 kernel: [ 0.556199] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) Aug 14 13:39:00 stt300 kernel: [ 0.556208] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) Aug 14 13:39:00 stt300 kernel: [ 0.556217] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) Aug 14 13:39:00 stt300 kernel: [ 0.556228] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Aug 14 13:39:00 stt300 kernel: [ 0.556235] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) Aug 14 13:39:00 stt300 kernel: [ 0.556242] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) Aug 14 13:39:00 stt300 kernel: [ 0.556249] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) Aug 14 13:39:00 stt300 kernel: [ 0.556256] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode) Aug 14 13:39:00 stt300 kernel: [ 0.556282] pci_bus 0000:00: on NUMA node 0 Aug 14 13:39:00 stt300 kernel: [ 0.556291] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Aug 14 13:39:00 stt300 kernel: [ 0.556615] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] Aug 14 13:39:00 stt300 kernel: [ 0.556823] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] Aug 14 13:39:00 stt300 kernel: [ 0.556973] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] Aug 14 13:39:00 stt300 kernel: [ 0.557313] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110413/nspredef-352) Aug 14 13:39:00 stt300 kernel: [ 0.557331] \_SB_.PCI0:_OSC evaluation returned wrong type Aug 14 13:39:00 stt300 kernel: [ 0.557335] _OSC request data:1 1f 1f Aug 14 13:39:00 stt300 kernel: [ 0.557346] pci0000:00: Requesting ACPI _OSC control (0x1d) Aug 14 13:39:00 stt300 kernel: [ 0.557493] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110413/nspredef-352) Aug 14 13:39:00 stt300 kernel: [ 0.557510] \_SB_.PCI0:_OSC evaluation returned wrong type Aug 14 13:39:00 stt300 kernel: [ 0.557514] _OSC request data:1 0 1d Aug 14 13:39:00 stt300 kernel: [ 0.557524] pci0000:00: ACPI _OSC request failed (AE_TYPE), returned control mask: 0x1d Aug 14 13:39:00 stt300 kernel: [ 0.557529] ACPI _OSC control for PCIe not granted, disabling ASPM Aug 14 13:39:00 stt300 kernel: [ 0.564414] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) Aug 14 13:39:00 stt300 kernel: [ 0.564569] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) Aug 14 13:39:00 stt300 kernel: [ 0.564721] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) Aug 14 13:39:00 stt300 kernel: [ 0.564871] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) Aug 14 13:39:00 stt300 kernel: [ 0.565022] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. Aug 14 13:39:00 stt300 kernel: [ 0.565176] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. Aug 14 13:39:00 stt300 kernel: [ 0.565329] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. Aug 14 13:39:00 stt300 kernel: [ 0.565483] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. Aug 14 13:39:00 stt300 kernel: [ 0.565752] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none Aug 14 13:39:00 stt300 kernel: [ 0.565774] vgaarb: loaded Aug 14 13:39:00 stt300 kernel: [ 0.565777] vgaarb: bridge control possible 0000:00:02.0 Aug 14 13:39:00 stt300 kernel: [ 0.565880] PCI: Using ACPI for IRQ routing Aug 14 13:39:00 stt300 kernel: [ 0.574797] PCI: pci_cache_line_size set to 64 bytes Aug 14 13:39:00 stt300 kernel: [ 0.574939] reserve RAM buffer: 000000000009fc00 - 000000000009ffff Aug 14 13:39:00 stt300 kernel: [ 0.574946] reserve RAM buffer: 000000007f43f000 - 000000007fffffff Aug 14 13:39:00 stt300 kernel: [ 0.574954] reserve RAM buffer: 000000007f600000 - 000000007fffffff Aug 14 13:39:00 stt300 kernel: [ 0.575232] HPET: 3 timers in total, 0 timers will be used for per-cpu timer Aug 14 13:39:00 stt300 kernel: [ 0.575244] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Aug 14 13:39:00 stt300 kernel: [ 0.575255] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Aug 14 13:39:00 stt300 kernel: [ 0.580081] Switching to clocksource hpet Aug 14 13:39:00 stt300 kernel: [ 0.583036] pnp: PnP ACPI init Aug 14 13:39:00 stt300 kernel: [ 0.583079] ACPI: bus type pnp registered Aug 14 13:39:00 stt300 kernel: [ 0.583816] Switched to NOHz mode on CPU #0 Aug 14 13:39:00 stt300 kernel: [ 0.583965] Switched to NOHz mode on CPU #1 Aug 14 13:39:00 stt300 kernel: [ 0.584953] pnp 00:00: [bus 00-ff] Aug 14 13:39:00 stt300 kernel: [ 0.584960] pnp 00:00: [io 0x0000-0x0cf7 window] Aug 14 13:39:00 stt300 kernel: [ 0.584966] pnp 00:00: [io 0x0cf8-0x0cff] Aug 14 13:39:00 stt300 kernel: [ 0.584972] pnp 00:00: [io 0x0d00-0xffff window] Aug 14 13:39:00 stt300 kernel: [ 0.584979] pnp 00:00: [mem 0x000a0000-0x000bffff window] Aug 14 13:39:00 stt300 kernel: [ 0.584985] pnp 00:00: [mem 0x000c0000-0x000c3fff window] Aug 14 13:39:00 stt300 kernel: [ 0.584991] pnp 00:00: [mem 0x000c4000-0x000c7fff window] Aug 14 13:39:00 stt300 kernel: [ 0.584997] pnp 00:00: [mem 0x000c8000-0x000cbfff window] Aug 14 13:39:00 stt300 kernel: [ 0.585003] pnp 00:00: [mem 0x000cc000-0x000cffff window] Aug 14 13:39:00 stt300 kernel: [ 0.585009] pnp 00:00: [mem 0x000d0000-0x000d3fff window] Aug 14 13:39:00 stt300 kernel: [ 0.585015] pnp 00:00: [mem 0x000d4000-0x000d7fff window] Aug 14 13:39:00 stt300 kernel: [ 0.585021] pnp 00:00: [mem 0x000d8000-0x000dbfff window] Aug 14 13:39:00 stt300 kernel: [ 0.585027] pnp 00:00: [mem 0x000dc000-0x000dffff window] Aug 14 13:39:00 stt300 kernel: [ 0.585034] pnp 00:00: [mem 0x000e0000-0x000e3fff window] Aug 14 13:39:00 stt300 kernel: [ 0.585040] pnp 00:00: [mem 0x000e4000-0x000e7fff window] Aug 14 13:39:00 stt300 kernel: [ 0.585046] pnp 00:00: [mem 0x000e8000-0x000ebfff window] Aug 14 13:39:00 stt300 kernel: [ 0.585052] pnp 00:00: [mem 0x000ec000-0x000effff window] Aug 14 13:39:00 stt300 kernel: [ 0.585058] pnp 00:00: [mem 0x000f0000-0x000fffff window] Aug 14 13:39:00 stt300 kernel: [ 0.585064] pnp 00:00: [mem 0x80000000-0xfebfffff window] Aug 14 13:39:00 stt300 kernel: [ 0.585193] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) Aug 14 13:39:00 stt300 kernel: [ 0.585515] pnp 00:01: [io 0x002e-0x002f] Aug 14 13:39:00 stt300 kernel: [ 0.585522] pnp 00:01: [io 0x004e-0x004f] Aug 14 13:39:00 stt300 kernel: [ 0.585527] pnp 00:01: [io 0x0061] Aug 14 13:39:00 stt300 kernel: [ 0.585532] pnp 00:01: [io 0x0070] Aug 14 13:39:00 stt300 kernel: [ 0.585537] pnp 00:01: [io 0x0080] Aug 14 13:39:00 stt300 kernel: [ 0.585546] pnp 00:01: [io 0x0092] Aug 14 13:39:00 stt300 kernel: [ 0.585551] pnp 00:01: [io 0x00b2-0x00b3] Aug 14 13:39:00 stt300 kernel: [ 0.585556] pnp 00:01: [io 0x0063] Aug 14 13:39:00 stt300 kernel: [ 0.585561] pnp 00:01: [io 0x0065] Aug 14 13:39:00 stt300 kernel: [ 0.585566] pnp 00:01: [io 0x0067] Aug 14 13:39:00 stt300 kernel: [ 0.585572] pnp 00:01: [io 0x0600-0x060f] Aug 14 13:39:00 stt300 kernel: [ 0.585577] pnp 00:01: [io 0x0610] Aug 14 13:39:00 stt300 kernel: [ 0.585582] pnp 00:01: [io 0x0800-0x080f] Aug 14 13:39:00 stt300 kernel: [ 0.585587] pnp 00:01: [io 0x0810-0x0817] Aug 14 13:39:00 stt300 kernel: [ 0.585593] pnp 00:01: [io 0x0400-0x047f] Aug 14 13:39:00 stt300 kernel: [ 0.585598] pnp 00:01: [io 0x0500-0x053f] Aug 14 13:39:00 stt300 kernel: [ 0.585604] pnp 00:01: [mem 0xe0000000-0xefffffff] Aug 14 13:39:00 stt300 kernel: [ 0.585610] pnp 00:01: [mem 0xfed1c000-0xfed1ffff] Aug 14 13:39:00 stt300 kernel: [ 0.585616] pnp 00:01: [mem 0xfed14000-0xfed17fff] Aug 14 13:39:00 stt300 kernel: [ 0.585621] pnp 00:01: [mem 0xfed18000-0xfed18fff] Aug 14 13:39:00 stt300 kernel: [ 0.585627] pnp 00:01: [mem 0xfed19000-0xfed19fff] Aug 14 13:39:00 stt300 kernel: [ 0.585633] pnp 00:01: [mem 0xfec00000-0xfec00fff] Aug 14 13:39:00 stt300 kernel: [ 0.585639] pnp 00:01: [mem 0xfee00000-0xfee00fff] Aug 14 13:39:00 stt300 kernel: [ 0.585782] system 00:01: [io 0x0600-0x060f] has been reserved Aug 14 13:39:00 stt300 kernel: [ 0.585790] system 00:01: [io 0x0610] has been reserved Aug 14 13:39:00 stt300 kernel: [ 0.585797] system 00:01: [io 0x0800-0x080f] has been reserved Aug 14 13:39:00 stt300 kernel: [ 0.585804] system 00:01: [io 0x0810-0x0817] has been reserved Aug 14 13:39:00 stt300 kernel: [ 0.585812] system 00:01: [io 0x0400-0x047f] has been reserved Aug 14 13:39:00 stt300 kernel: [ 0.585820] system 00:01: [io 0x0500-0x053f] has been reserved Aug 14 13:39:00 stt300 kernel: [ 0.585829] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved Aug 14 13:39:00 stt300 kernel: [ 0.585836] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved Aug 14 13:39:00 stt300 kernel: [ 0.585844] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved Aug 14 13:39:00 stt300 kernel: [ 0.585851] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved Aug 14 13:39:00 stt300 kernel: [ 0.585859] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved Aug 14 13:39:00 stt300 kernel: [ 0.585867] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved Aug 14 13:39:00 stt300 kernel: [ 0.585875] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved Aug 14 13:39:00 stt300 kernel: [ 0.585883] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) Aug 14 13:39:00 stt300 kernel: [ 0.585911] pnp 00:02: [io 0x0000-0x001f] Aug 14 13:39:00 stt300 kernel: [ 0.585917] pnp 00:02: [io 0x0081-0x0091] Aug 14 13:39:00 stt300 kernel: [ 0.585922] pnp 00:02: [io 0x0093-0x009f] Aug 14 13:39:00 stt300 kernel: [ 0.585927] pnp 00:02: [io 0x00c0-0x00df] Aug 14 13:39:00 stt300 kernel: [ 0.585933] pnp 00:02: [dma 4] Aug 14 13:39:00 stt300 kernel: [ 0.586005] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) Aug 14 13:39:00 stt300 kernel: [ 0.586071] pnp 00:03: [io 0x0070-0x0077] Aug 14 13:39:00 stt300 kernel: [ 0.586140] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) Aug 14 13:39:00 stt300 kernel: [ 0.586305] pnp 00:04: [irq 0 disabled] Aug 14 13:39:00 stt300 kernel: [ 0.586323] pnp 00:04: [irq 8] Aug 14 13:39:00 stt300 kernel: [ 0.586329] pnp 00:04: [mem 0xfed00000-0xfed003ff] Aug 14 13:39:00 stt300 kernel: [ 0.586400] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) Aug 14 13:39:00 stt300 kernel: [ 0.586432] pnp 00:05: [io 0x00f0] Aug 14 13:39:00 stt300 kernel: [ 0.586443] pnp 00:05: [irq 13] Aug 14 13:39:00 stt300 kernel: [ 0.586515] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) Aug 14 13:39:00 stt300 kernel: [ 0.586545] pnp 00:06: [mem 0xff800000-0xffffffff] Aug 14 13:39:00 stt300 kernel: [ 0.586620] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active) Aug 14 13:39:00 stt300 kernel: [ 0.586679] pnp 00:07: [io 0x0060] Aug 14 13:39:00 stt300 kernel: [ 0.586685] pnp 00:07: [io 0x0064] Aug 14 13:39:00 stt300 kernel: [ 0.586696] pnp 00:07: [irq 1] Aug 14 13:39:00 stt300 kernel: [ 0.586769] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) Aug 14 13:39:00 stt300 kernel: [ 0.586819] pnp 00:08: [irq 12] Aug 14 13:39:00 stt300 kernel: [ 0.586899] pnp 00:08: Plug and Play ACPI device, IDs SYN1e33 SYN1e00 SYN0002 PNP0f13 (active) Aug 14 13:39:00 stt300 kernel: [ 0.587082] pnp: PnP ACPI: found 9 devices Aug 14 13:39:00 stt300 kernel: [ 0.587086] ACPI: ACPI bus type pnp unregistered Aug 14 13:39:00 stt300 kernel: [ 0.587094] PnPBIOS: Disabled by ACPI PNP Aug 14 13:39:00 stt300 kernel: [ 0.626289] PCI: max bus depth: 1 pci_try_num: 2 Aug 14 13:39:00 stt300 kernel: [ 0.626339] pci 0000:00:1c.0: PCI bridge to [bus 01-01] Aug 14 13:39:00 stt300 kernel: [ 0.626347] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] Aug 14 13:39:00 stt300 kernel: [ 0.626358] pci 0000:00:1c.0: bridge window [mem 0x93000000-0x93ffffff] Aug 14 13:39:00 stt300 kernel: [ 0.626368] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref] Aug 14 13:39:00 stt300 kernel: [ 0.626380] pci 0000:00:1c.1: PCI bridge to [bus 02-02] Aug 14 13:39:00 stt300 kernel: [ 0.626388] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] Aug 14 13:39:00 stt300 kernel: [ 0.626398] pci 0000:00:1c.1: bridge window [mem 0x92000000-0x92ffffff] Aug 14 13:39:00 stt300 kernel: [ 0.626407] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff 64bit pref] Aug 14 13:39:00 stt300 kernel: [ 0.626419] pci 0000:00:1e.0: PCI bridge to [bus 03-03] Aug 14 13:39:00 stt300 kernel: [ 0.626424] pci 0000:00:1e.0: bridge window [io disabled] Aug 14 13:39:00 stt300 kernel: [ 0.626432] pci 0000:00:1e.0: bridge window [mem disabled] Aug 14 13:39:00 stt300 kernel: [ 0.626440] pci 0000:00:1e.0: bridge window [mem pref disabled] Aug 14 13:39:00 stt300 kernel: [ 0.626473] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Aug 14 13:39:00 stt300 kernel: [ 0.626484] pci 0000:00:1c.0: setting latency timer to 64 Aug 14 13:39:00 stt300 kernel: [ 0.626502] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Aug 14 13:39:00 stt300 kernel: [ 0.626511] pci 0000:00:1c.1: setting latency timer to 64 Aug 14 13:39:00 stt300 kernel: [ 0.626524] pci 0000:00:1e.0: setting latency timer to 64 Aug 14 13:39:00 stt300 kernel: [ 0.626532] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] Aug 14 13:39:00 stt300 kernel: [ 0.626538] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] Aug 14 13:39:00 stt300 kernel: [ 0.626544] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] Aug 14 13:39:00 stt300 kernel: [ 0.626551] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] Aug 14 13:39:00 stt300 kernel: [ 0.626557] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] Aug 14 13:39:00 stt300 kernel: [ 0.626563] pci_bus 0000:01: resource 1 [mem 0x93000000-0x93ffffff] Aug 14 13:39:00 stt300 kernel: [ 0.626570] pci_bus 0000:01: resource 2 [mem 0x90000000-0x90ffffff 64bit pref] Aug 14 13:39:00 stt300 kernel: [ 0.626576] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] Aug 14 13:39:00 stt300 kernel: [ 0.626582] pci_bus 0000:02: resource 1 [mem 0x92000000-0x92ffffff] Aug 14 13:39:00 stt300 kernel: [ 0.626589] pci_bus 0000:02: resource 2 [mem 0x91000000-0x91ffffff 64bit pref] Aug 14 13:39:00 stt300 kernel: [ 0.626596] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] Aug 14 13:39:00 stt300 kernel: [ 0.626602] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] Aug 14 13:39:00 stt300 kernel: [ 0.626608] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] Aug 14 13:39:00 stt300 kernel: [ 0.626614] pci_bus 0000:03: resource 7 [mem 0x80000000-0xfebfffff] Aug 14 13:39:00 stt300 kernel: [ 0.626762] NET: Registered protocol family 2 Aug 14 13:39:00 stt300 kernel: [ 0.626977] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Aug 14 13:39:00 stt300 kernel: [ 0.627667] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Aug 14 13:39:00 stt300 kernel: [ 0.628644] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) Aug 14 13:39:00 stt300 kernel: [ 0.629074] TCP: Hash tables configured (established 131072 bind 65536) Aug 14 13:39:00 stt300 kernel: [ 0.629080] TCP reno registered Aug 14 13:39:00 stt300 kernel: [ 0.629088] UDP hash table entries: 512 (order: 2, 16384 bytes) Aug 14 13:39:00 stt300 kernel: [ 0.629107] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) Aug 14 13:39:00 stt300 kernel: [ 0.629583] NET: Registered protocol family 1 Aug 14 13:39:00 stt300 kernel: [ 0.629621] pci 0000:00:02.0: Boot video device Aug 14 13:39:00 stt300 kernel: [ 0.644096] PCI: CLS 64 bytes, default 64 Aug 14 13:39:00 stt300 kernel: [ 0.644208] Unpacking initramfs... Aug 14 13:39:00 stt300 kernel: [ 0.761164] Freeing initrd memory: 2316k freed Aug 14 13:39:00 stt300 kernel: [ 0.762851] Simple Boot Flag at 0x44 set to 0x1 Aug 14 13:39:00 stt300 kernel: [ 0.763769] audit: initializing netlink socket (disabled) Aug 14 13:39:00 stt300 kernel: [ 0.763803] type=2000 audit(1313321927.756:1): initialized Aug 14 13:39:00 stt300 kernel: [ 0.795592] highmem bounce pool size: 64 pages Aug 14 13:39:00 stt300 kernel: [ 0.795605] HugeTLB registered 2 MB page size, pre-allocated 0 pages Aug 14 13:39:00 stt300 kernel: [ 0.804884] VFS: Disk quotas dquot_6.5.2 Aug 14 13:39:00 stt300 kernel: [ 0.805057] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Aug 14 13:39:00 stt300 kernel: [ 0.805281] msgmni has been set to 1734 Aug 14 13:39:00 stt300 kernel: [ 0.805715] alg: No test for stdrng (krng) Aug 14 13:39:00 stt300 kernel: [ 0.805796] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Aug 14 13:39:00 stt300 kernel: [ 0.805804] io scheduler noop registered Aug 14 13:39:00 stt300 kernel: [ 0.805808] io scheduler deadline registered Aug 14 13:39:00 stt300 kernel: [ 0.805846] io scheduler cfq registered (default) Aug 14 13:39:00 stt300 kernel: [ 0.806039] pcieport 0000:00:1c.0: setting latency timer to 64 Aug 14 13:39:00 stt300 kernel: [ 0.806112] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X Aug 14 13:39:00 stt300 kernel: [ 0.806240] pcieport 0000:00:1c.1: setting latency timer to 64 Aug 14 13:39:00 stt300 kernel: [ 0.806307] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X Aug 14 13:39:00 stt300 kernel: [ 0.806683] ERST: Table is not found! Aug 14 13:39:00 stt300 kernel: [ 0.806713] isapnp: Scanning for PnP cards... Aug 14 13:39:00 stt300 kernel: [ 1.160568] isapnp: No Plug & Play device found Aug 14 13:39:00 stt300 kernel: [ 1.160723] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Aug 14 13:39:00 stt300 kernel: [ 1.161975] Linux agpgart interface v0.103 Aug 14 13:39:00 stt300 kernel: [ 1.162207] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset Aug 14 13:39:00 stt300 kernel: [ 1.162427] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable Aug 14 13:39:00 stt300 kernel: [ 1.162687] agpgart-intel 0000:00:00.0: detected 8192K stolen memory Aug 14 13:39:00 stt300 kernel: [ 1.162915] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000 Aug 14 13:39:00 stt300 kernel: [ 1.163249] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 Aug 14 13:39:00 stt300 kernel: [ 1.168513] serio: i8042 KBD port at 0x60,0x64 irq 1 Aug 14 13:39:00 stt300 kernel: [ 1.168532] serio: i8042 AUX port at 0x60,0x64 irq 12 Aug 14 13:39:00 stt300 kernel: [ 1.168834] mousedev: PS/2 mouse device common for all mice Aug 14 13:39:00 stt300 kernel: [ 1.168944] rtc_cmos 00:03: RTC can wake from S4 Aug 14 13:39:00 stt300 kernel: [ 1.169115] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 Aug 14 13:39:00 stt300 kernel: [ 1.169153] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs Aug 14 13:39:00 stt300 kernel: [ 1.169181] cpuidle: using governor ladder Aug 14 13:39:00 stt300 kernel: [ 1.169185] cpuidle: using governor menu Aug 14 13:39:00 stt300 kernel: [ 1.169830] TCP cubic registered Aug 14 13:39:00 stt300 kernel: [ 1.169937] NET: Registered protocol family 10 Aug 14 13:39:00 stt300 kernel: [ 1.171486] Mobile IPv6 Aug 14 13:39:00 stt300 kernel: [ 1.171493] NET: Registered protocol family 17 Aug 14 13:39:00 stt300 kernel: [ 1.171503] Registering the dns_resolver key type Aug 14 13:39:00 stt300 kernel: [ 1.171562] Using IPI No-Shortcut mode Aug 14 13:39:00 stt300 kernel: [ 1.171788] PM: Hibernation image not present or could not be loaded. Aug 14 13:39:00 stt300 kernel: [ 1.171816] registered taskstats version 1 Aug 14 13:39:00 stt300 kernel: [ 1.176970] rtc_cmos 00:03: setting system clock to 2011-08-14 11:38:48 UTC (1313321928) Aug 14 13:39:00 stt300 kernel: [ 1.177078] Initializing network drop monitor service Aug 14 13:39:00 stt300 kernel: [ 1.177323] Freeing unused kernel memory: 404k freed Aug 14 13:39:00 stt300 kernel: [ 1.177685] Write protecting the kernel text: 2768k Aug 14 13:39:00 stt300 kernel: [ 1.177760] Write protecting the kernel read-only data: 1068k Aug 14 13:39:00 stt300 kernel: [ 1.177765] NX-protecting the kernel data: 3376k Aug 14 13:39:00 stt300 kernel: [ 1.294585] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 Aug 14 13:39:00 stt300 kernel: [ 1.352206] ACPI Warning: For \_TZ_.THRM._AL0: Return Package has no elements (empty) (20110413/nspredef-456) Aug 14 13:39:00 stt300 kernel: [ 1.352229] ACPI: [Package] has zero elements (f5953e00) Aug 14 13:39:00 stt300 kernel: [ 1.352316] ACPI: Invalid active0 threshold Aug 14 13:39:00 stt300 kernel: [ 1.361502] thermal LNXTHERM:00: registered as thermal_zone0 Aug 14 13:39:00 stt300 kernel: [ 1.361513] ACPI: Thermal Zone [THRM] (44 C) Aug 14 13:39:00 stt300 kernel: [ 1.369279] SCSI subsystem initialized Aug 14 13:39:00 stt300 kernel: [ 1.388653] libata version 3.00 loaded. Aug 14 13:39:00 stt300 kernel: [ 1.391239] ahci 0000:00:1f.2: version 3.0 Aug 14 13:39:00 stt300 kernel: [ 1.391272] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Aug 14 13:39:00 stt300 kernel: [ 1.391369] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X Aug 14 13:39:00 stt300 kernel: [ 1.391557] ahci: SSS flag set, parallel bus scan disabled Aug 14 13:39:00 stt300 kernel: [ 1.391615] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode Aug 14 13:39:00 stt300 kernel: [ 1.391627] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part Aug 14 13:39:00 stt300 kernel: [ 1.391641] ahci 0000:00:1f.2: setting latency timer to 64 Aug 14 13:39:00 stt300 kernel: [ 1.393755] scsi0 : ahci Aug 14 13:39:00 stt300 kernel: [ 1.394119] scsi1 : ahci Aug 14 13:39:00 stt300 kernel: [ 1.394380] scsi2 : ahci Aug 14 13:39:00 stt300 kernel: [ 1.394638] scsi3 : ahci Aug 14 13:39:00 stt300 kernel: [ 1.395427] ata1: SATA max UDMA/133 abar m1024@0x94204000 port 0x94204100 irq 42 Aug 14 13:39:00 stt300 kernel: [ 1.395439] ata2: SATA max UDMA/133 abar m1024@0x94204000 port 0x94204180 irq 42 Aug 14 13:39:00 stt300 kernel: [ 1.395447] ata3: DUMMY Aug 14 13:39:00 stt300 kernel: [ 1.395453] ata4: DUMMY Aug 14 13:39:00 stt300 kernel: [ 1.760036] Refined TSC clocksource calibration: 1662.681 MHz. Aug 14 13:39:00 stt300 kernel: [ 1.760047] Switching to clocksource tsc Aug 14 13:39:00 stt300 kernel: [ 1.884089] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Aug 14 13:39:00 stt300 kernel: [ 1.884902] ata1.00: unexpected _GTF length (4) Aug 14 13:39:00 stt300 kernel: [ 1.933771] ata1.00: ATA-8: ST9250315AS, 0001SDM1, max UDMA/133 Aug 14 13:39:00 stt300 kernel: [ 1.933778] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) Aug 14 13:39:00 stt300 kernel: [ 1.935602] ata1.00: unexpected _GTF length (4) Aug 14 13:39:00 stt300 kernel: [ 1.935940] ata1.00: configured for UDMA/133 Aug 14 13:39:00 stt300 kernel: [ 1.936304] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0001 PQ: 0 ANSI: 5 Aug 14 13:39:00 stt300 kernel: [ 2.256037] ata2: SATA link down (SStatus 0 SControl 300) Aug 14 13:39:00 stt300 kernel: [ 2.268646] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) Aug 14 13:39:00 stt300 kernel: [ 2.268864] sd 0:0:0:0: [sda] Write Protect is off Aug 14 13:39:00 stt300 kernel: [ 2.268874] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Aug 14 13:39:00 stt300 kernel: [ 2.268980] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Aug 14 13:39:00 stt300 kernel: [ 2.391332] sda: sda1 sda2 Aug 14 13:39:00 stt300 kernel: [ 2.392198] sd 0:0:0:0: [sda] Attached SCSI disk Aug 14 13:39:00 stt300 kernel: [ 2.964556] PM: Starting manual resume from disk Aug 14 13:39:00 stt300 kernel: [ 2.964564] PM: Hibernation image partition 8:1 present Aug 14 13:39:00 stt300 kernel: [ 2.964568] PM: Looking for hibernation image. Aug 14 13:39:00 stt300 kernel: [ 2.965033] PM: Image not found (code -22) Aug 14 13:39:00 stt300 kernel: [ 2.965037] PM: Hibernation image not present or could not be loaded. Aug 14 13:39:00 stt300 kernel: [ 2.975052] REISERFS (device sda2): found reiserfs format "3.6" with standard journal Aug 14 13:39:00 stt300 kernel: [ 2.975081] REISERFS (device sda2): using ordered data mode Aug 14 13:39:00 stt300 kernel: [ 2.981906] REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 Aug 14 13:39:00 stt300 kernel: [ 2.982780] REISERFS (device sda2): checking transaction log (sda2) Aug 14 13:39:00 stt300 kernel: [ 3.065005] REISERFS (device sda2): Using r5 hash to sort names Aug 14 13:39:00 stt300 kernel: [ 5.768446] ACPI: acpi_idle registered with cpuidle Aug 14 13:39:00 stt300 kernel: [ 5.775322] Marking TSC unstable due to TSC halts in idle Aug 14 13:39:00 stt300 kernel: [ 5.783618] Switching to clocksource hpet Aug 14 13:39:00 stt300 kernel: [ 5.797532] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 Aug 14 13:39:00 stt300 kernel: [ 5.797550] ACPI: Power Button [PWRB] Aug 14 13:39:00 stt300 kernel: [ 5.797763] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 Aug 14 13:39:00 stt300 kernel: [ 5.799241] ACPI: Lid Switch [LID0] Aug 14 13:39:00 stt300 kernel: [ 5.799519] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 Aug 14 13:39:00 stt300 kernel: [ 5.799536] ACPI: Power Button [PWRF] Aug 14 13:39:00 stt300 kernel: [ 5.812438] wmi: Mapper loaded Aug 14 13:39:00 stt300 kernel: [ 5.945040] ACPI: Battery Slot [BAT0] (battery present) Aug 14 13:39:00 stt300 kernel: [ 6.001603] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded Aug 14 13:39:00 stt300 kernel: [ 6.001684] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Aug 14 13:39:00 stt300 kernel: [ 6.001825] r8169 0000:01:00.0: setting latency timer to 64 Aug 14 13:39:00 stt300 kernel: [ 6.001849] r8169 0000:01:00.0: (unregistered net_device): unknown MAC, using family default Aug 14 13:39:00 stt300 kernel: [ 6.002059] r8169 0000:01:00.0: irq 43 for MSI/MSI-X Aug 14 13:39:00 stt300 kernel: [ 6.003446] r8169 0000:01:00.0: eth0: RTL8101e at 0xf8306000, 68:b5:99:d3:c1:d8, XID 04000000 IRQ 43 Aug 14 13:39:00 stt300 kernel: [ 6.015224] usbcore: registered new interface driver usbfs Aug 14 13:39:00 stt300 kernel: [ 6.015298] usbcore: registered new interface driver hub Aug 14 13:39:00 stt300 kernel: [ 6.015429] usbcore: registered new device driver usb Aug 14 13:39:00 stt300 kernel: [ 6.113107] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Aug 14 13:39:00 stt300 kernel: [ 6.123609] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Aug 14 13:39:00 stt300 kernel: [ 6.123681] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Aug 14 13:39:00 stt300 kernel: [ 6.123726] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Aug 14 13:39:00 stt300 kernel: [ 6.123736] ehci_hcd 0000:00:1d.7: EHCI Host Controller Aug 14 13:39:00 stt300 kernel: [ 6.123839] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Aug 14 13:39:00 stt300 kernel: [ 6.123903] ehci_hcd 0000:00:1d.7: using broken periodic workaround Aug 14 13:39:00 stt300 kernel: [ 6.123926] ehci_hcd 0000:00:1d.7: debug port 1 Aug 14 13:39:00 stt300 kernel: [ 6.127832] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported Aug 14 13:39:00 stt300 kernel: [ 6.127874] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x94204400 Aug 14 13:39:00 stt300 kernel: [ 6.140083] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Aug 14 13:39:00 stt300 kernel: [ 6.140162] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Aug 14 13:39:00 stt300 kernel: [ 6.140169] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 14 13:39:00 stt300 kernel: [ 6.140174] usb usb1: Product: EHCI Host Controller Aug 14 13:39:00 stt300 kernel: [ 6.140179] usb usb1: Manufacturer: Linux 3.0.0-1-686-pae ehci_hcd Aug 14 13:39:00 stt300 kernel: [ 6.140185] usb usb1: SerialNumber: 0000:00:1d.7 Aug 14 13:39:00 stt300 kernel: [ 6.140522] hub 1-0:1.0: USB hub found Aug 14 13:39:00 stt300 kernel: [ 6.140540] hub 1-0:1.0: 8 ports detected Aug 14 13:39:00 stt300 kernel: [ 6.332220] cfg80211: Calling CRDA to update world regulatory domain Aug 14 13:39:00 stt300 kernel: [ 6.350867] ACPI: AC Adapter [AC] (off-line) Aug 14 13:39:00 stt300 kernel: [ 6.452092] usb 1-8: new high speed USB device number 2 using ehci_hcd Aug 14 13:39:00 stt300 kernel: [ 6.489361] input: PC Speaker as /devices/platform/pcspkr/input/input4 Aug 14 13:39:00 stt300 kernel: [ 6.654715] usb 1-8: New USB device found, idVendor=174f, idProduct=1122 Aug 14 13:39:00 stt300 kernel: [ 6.654729] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Aug 14 13:39:00 stt300 kernel: [ 6.654740] usb 1-8: Product: HP Webcam Aug 14 13:39:00 stt300 kernel: [ 6.654747] usb 1-8: Manufacturer: D-MAX Aug 14 13:39:00 stt300 kernel: [ 6.654755] usb 1-8: SerialNumber: 00 Aug 14 13:39:00 stt300 kernel: [ 6.754662] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Aug 14 13:39:00 stt300 kernel: [ 6.754777] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X Aug 14 13:39:00 stt300 kernel: [ 6.754842] HDA Intel 0000:00:1b.0: setting latency timer to 64 Aug 14 13:39:00 stt300 kernel: [ 6.796496] uhci_hcd: USB Universal Host Controller Interface driver Aug 14 13:39:00 stt300 kernel: [ 6.815218] brcmutil: module is from the staging directory, the quality is unknown, you have been warned. Aug 14 13:39:00 stt300 kernel: [ 6.820988] input: HP WMI hotkeys as /devices/virtual/input/input5 Aug 14 13:39:00 stt300 kernel: [ 6.857159] [drm] Initialized drm 1.1.0 20060810 Aug 14 13:39:00 stt300 kernel: [ 7.006096] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 Aug 14 13:39:00 stt300 kernel: [ 7.024481] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 Aug 14 13:39:00 stt300 kernel: [ 7.024782] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 Aug 14 13:39:00 stt300 kernel: [ 7.025452] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Aug 14 13:39:00 stt300 kernel: [ 7.025477] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Aug 14 13:39:00 stt300 kernel: [ 7.025485] uhci_hcd 0000:00:1d.0: UHCI Host Controller Aug 14 13:39:00 stt300 kernel: [ 7.025510] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Aug 14 13:39:00 stt300 kernel: [ 7.025555] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080 Aug 14 13:39:00 stt300 kernel: [ 7.025647] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Aug 14 13:39:00 stt300 kernel: [ 7.025654] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 14 13:39:00 stt300 kernel: [ 7.025660] usb usb2: Product: UHCI Host Controller Aug 14 13:39:00 stt300 kernel: [ 7.025665] usb usb2: Manufacturer: Linux 3.0.0-1-686-pae uhci_hcd Aug 14 13:39:00 stt300 kernel: [ 7.025670] usb usb2: SerialNumber: 0000:00:1d.0 Aug 14 13:39:00 stt300 kernel: [ 7.025971] hub 2-0:1.0: USB hub found Aug 14 13:39:00 stt300 kernel: [ 7.025989] hub 2-0:1.0: 2 ports detected Aug 14 13:39:00 stt300 kernel: [ 7.026216] uhci_hcd 0000:00:1d.1: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Aug 14 13:39:00 stt300 kernel: [ 7.026238] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Aug 14 13:39:00 stt300 kernel: [ 7.026249] uhci_hcd 0000:00:1d.1: UHCI Host Controller Aug 14 13:39:00 stt300 kernel: [ 7.026286] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Aug 14 13:39:00 stt300 kernel: [ 7.026373] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00003060 Aug 14 13:39:00 stt300 kernel: [ 7.026494] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Aug 14 13:39:00 stt300 kernel: [ 7.026504] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 14 13:39:00 stt300 kernel: [ 7.026511] usb usb3: Product: UHCI Host Controller Aug 14 13:39:00 stt300 kernel: [ 7.026518] usb usb3: Manufacturer: Linux 3.0.0-1-686-pae uhci_hcd Aug 14 13:39:00 stt300 kernel: [ 7.026525] usb usb3: SerialNumber: 0000:00:1d.1 Aug 14 13:39:00 stt300 kernel: [ 7.026931] hub 3-0:1.0: USB hub found Aug 14 13:39:00 stt300 kernel: [ 7.026953] hub 3-0:1.0: 2 ports detected Aug 14 13:39:00 stt300 kernel: [ 7.027180] uhci_hcd 0000:00:1d.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Aug 14 13:39:00 stt300 kernel: [ 7.027202] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Aug 14 13:39:00 stt300 kernel: [ 7.027213] uhci_hcd 0000:00:1d.2: UHCI Host Controller Aug 14 13:39:00 stt300 kernel: [ 7.027240] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Aug 14 13:39:00 stt300 kernel: [ 7.027325] uhci_hcd 0000:00:1d.2: irq 17, io base 0x00003040 Aug 14 13:39:00 stt300 kernel: [ 7.027449] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Aug 14 13:39:00 stt300 kernel: [ 7.027459] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 14 13:39:00 stt300 kernel: [ 7.027466] usb usb4: Product: UHCI Host Controller Aug 14 13:39:00 stt300 kernel: [ 7.027473] usb usb4: Manufacturer: Linux 3.0.0-1-686-pae uhci_hcd Aug 14 13:39:00 stt300 kernel: [ 7.027480] usb usb4: SerialNumber: 0000:00:1d.2 Aug 14 13:39:00 stt300 kernel: [ 7.027871] hub 4-0:1.0: USB hub found Aug 14 13:39:00 stt300 kernel: [ 7.027891] hub 4-0:1.0: 2 ports detected Aug 14 13:39:00 stt300 kernel: [ 7.028179] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 Aug 14 13:39:00 stt300 kernel: [ 7.028204] uhci_hcd 0000:00:1d.3: setting latency timer to 64 Aug 14 13:39:00 stt300 kernel: [ 7.028214] uhci_hcd 0000:00:1d.3: UHCI Host Controller Aug 14 13:39:00 stt300 kernel: [ 7.028244] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 Aug 14 13:39:00 stt300 kernel: [ 7.028333] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00003020 Aug 14 13:39:00 stt300 kernel: [ 7.028452] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Aug 14 13:39:00 stt300 kernel: [ 7.028462] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 14 13:39:00 stt300 kernel: [ 7.028470] usb usb5: Product: UHCI Host Controller Aug 14 13:39:00 stt300 kernel: [ 7.028477] usb usb5: Manufacturer: Linux 3.0.0-1-686-pae uhci_hcd Aug 14 13:39:00 stt300 kernel: [ 7.028484] usb usb5: SerialNumber: 0000:00:1d.3 Aug 14 13:39:00 stt300 kernel: [ 7.028912] hub 5-0:1.0: USB hub found Aug 14 13:39:00 stt300 kernel: [ 7.028930] hub 5-0:1.0: 2 ports detected Aug 14 13:39:00 stt300 kernel: [ 7.138559] i915 0000:00:02.0: power state changed by ACPI to D0 Aug 14 13:39:00 stt300 kernel: [ 7.138571] i915 0000:00:02.0: power state changed by ACPI to D0 Aug 14 13:39:00 stt300 kernel: [ 7.138584] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Aug 14 13:39:00 stt300 kernel: [ 7.138593] i915 0000:00:02.0: setting latency timer to 64 Aug 14 13:39:00 stt300 kernel: [ 7.194697] i915 0000:00:02.0: irq 45 for MSI/MSI-X Aug 14 13:39:00 stt300 kernel: [ 7.194711] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). Aug 14 13:39:00 stt300 kernel: [ 7.194716] [drm] Driver supports precise vblank timestamp query. Aug 14 13:39:00 stt300 kernel: [ 7.194806] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem Aug 14 13:39:00 stt300 kernel: [ 7.255232] brcmsmac: module is from the staging directory, the quality is unknown, you have been warned. Aug 14 13:39:00 stt300 kernel: [ 7.266179] brcmsmac 0000:02:00.0: bus 2 slot 0 func 0 irq 10 Aug 14 13:39:00 stt300 kernel: [ 7.266215] brcmsmac 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Aug 14 13:39:00 stt300 kernel: [ 7.266234] brcmsmac 0000:02:00.0: setting latency timer to 64 Aug 14 13:39:00 stt300 kernel: [ 7.313284] Linux media interface: v0.10 Aug 14 13:39:00 stt300 kernel: [ 7.324455] Linux video capture interface: v2.00 Aug 14 13:39:00 stt300 kernel: [ 7.338115] uvcvideo: Found UVC 1.00 device HP Webcam (174f:1122) Aug 14 13:39:00 stt300 kernel: [ 7.351556] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input9 Aug 14 13:39:00 stt300 kernel: [ 7.351796] usbcore: registered new interface driver uvcvideo Aug 14 13:39:00 stt300 kernel: [ 7.351804] USB Video Class driver (v1.1.0) Aug 14 13:39:00 stt300 kernel: [ 7.518589] [drm] initialized overlay support Aug 14 13:39:00 stt300 kernel: [ 7.539074] fbcon: inteldrmfb (fb0) is primary device Aug 14 13:39:00 stt300 kernel: [ 7.588281] Console: switching to colour frame buffer device 128x37 Aug 14 13:39:00 stt300 kernel: [ 7.597366] fb0: inteldrmfb frame buffer device Aug 14 13:39:00 stt300 kernel: [ 7.597371] drm: registered panic notifier Aug 14 13:39:00 stt300 kernel: [ 7.615502] acpi device:21: registered as cooling_device2 Aug 14 13:39:00 stt300 kernel: [ 7.616165] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input10 Aug 14 13:39:00 stt300 kernel: [ 7.616336] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no) Aug 14 13:39:00 stt300 kernel: [ 7.616480] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Aug 14 13:39:00 stt300 kernel: [ 7.815387] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0xa0400 Aug 14 13:39:00 stt300 kernel: [ 7.861970] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 Aug 14 13:39:00 stt300 kernel: [ 7.905114] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' Aug 14 13:39:00 stt300 kernel: [ 8.562929] cfg80211: World regulatory domain updated: Aug 14 13:39:00 stt300 kernel: [ 8.562937] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Aug 14 13:39:00 stt300 kernel: [ 8.562944] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 13:39:00 stt300 kernel: [ 8.562951] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Aug 14 13:39:00 stt300 kernel: [ 8.562957] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Aug 14 13:39:00 stt300 kernel: [ 8.562963] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 13:39:00 stt300 kernel: [ 8.562970] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 13:39:00 stt300 kernel: [ 8.562998] cfg80211: Calling CRDA for country: US Aug 14 13:39:00 stt300 kernel: [ 8.575099] cfg80211: Regulatory domain changed to country: US Aug 14 13:39:00 stt300 kernel: [ 8.575107] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Aug 14 13:39:00 stt300 kernel: [ 8.575114] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) Aug 14 13:39:00 stt300 kernel: [ 8.575121] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) Aug 14 13:39:00 stt300 kernel: [ 8.575127] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 13:39:00 stt300 kernel: [ 8.575133] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 13:39:00 stt300 kernel: [ 8.575140] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 13:39:00 stt300 kernel: [ 8.575146] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) Aug 14 13:39:00 stt300 kernel: [ 8.617805] cfg80211: Calling CRDA for country: EU Aug 14 13:39:00 stt300 kernel: [ 8.629409] cfg80211: Regulatory domain changed to country: EU Aug 14 13:39:00 stt300 kernel: [ 8.629417] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Aug 14 13:39:00 stt300 kernel: [ 8.629424] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) Aug 14 13:39:00 stt300 kernel: [ 8.629430] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) Aug 14 13:39:00 stt300 kernel: [ 8.629436] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) Aug 14 13:39:00 stt300 kernel: [ 8.629442] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) Aug 14 13:39:00 stt300 kernel: [ 10.064927] Adding 3905532k swap on /dev/sda1. Priority:-1 extents:1 across:3905532k Aug 14 13:39:00 stt300 kernel: [ 10.494607] loop: module loaded Aug 14 13:39:00 stt300 kernel: [ 12.173978] fuse init (API version 7.16) Aug 14 13:39:01 stt300 kernel: [ 13.994612] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12 Aug 14 13:39:01 stt300 NetworkManager[1181]: <info> NetworkManager (version 0.8.4.0) is starting... Aug 14 13:39:01 stt300 NetworkManager[1181]: <info> Read config file /etc/NetworkManager/NetworkManager.conf Aug 14 13:39:01 stt300 NetworkManager[1181]: <info> trying to start the modem manager... Aug 14 13:39:01 stt300 dbus[1166]: [system] Activating service name='org.freedesktop.ModemManager' (using servicehelper) Aug 14 13:39:01 stt300 modem-manager[1190]: <info> ModemManager (version 0.4.997) starting... Aug 14 13:39:01 stt300 dbus[1166]: [system] Successfully activated service 'org.freedesktop.ModemManager' Aug 14 13:39:02 stt300 dbus[1166]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper) Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin Longcheer Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin Novatel Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin SimTech Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin Nokia Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin Gobi Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin Option Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin Sierra Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin AnyData Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin Generic Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin MotoC Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin Option High-Speed Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin Ericsson MBM Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin Samsung Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin Huawei Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin ZTE Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin X22X Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin Linktop Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin Wavecom Aug 14 13:39:02 stt300 polkitd[1195]: started daemon version 0.102 using authority implementation `local' version `0.102' Aug 14 13:39:02 stt300 dbus[1166]: [system] Successfully activated service 'org.freedesktop.PolicyKit1' Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> monitoring kernel firmware directory '/lib/firmware'. Aug 14 13:39:02 stt300 NetworkManager[1181]: SCPlugin-Ifupdown: init! Aug 14 13:39:02 stt300 NetworkManager[1181]: SCPlugin-Ifupdown: update_system_hostname Aug 14 13:39:02 stt300 NetworkManager[1181]: SCPluginIfupdown: management mode: unmanaged Aug 14 13:39:02 stt300 NetworkManager[1181]: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/net/eth0, iface: eth0) Aug 14 13:39:02 stt300 NetworkManager[1181]: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/net/eth0, iface: eth0): no ifupdown configuration found. Aug 14 13:39:02 stt300 NetworkManager[1181]: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/wlan0, iface: wlan0) Aug 14 13:39:02 stt300 NetworkManager[1181]: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found. Aug 14 13:39:02 stt300 NetworkManager[1181]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo) Aug 14 13:39:02 stt300 NetworkManager[1181]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found. Aug 14 13:39:02 stt300 NetworkManager[1181]: SCPlugin-Ifupdown: end _init. Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> Loaded plugin ifupdown: (C) 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list. Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. Aug 14 13:39:02 stt300 NetworkManager[1181]: Ifupdown: get unmanaged devices count: 0 Aug 14 13:39:02 stt300 NetworkManager[1181]: SCPlugin-Ifupdown: (148923920) ... get_connections. Aug 14 13:39:02 stt300 NetworkManager[1181]: SCPlugin-Ifupdown: (148923920) ... get_connections (managed=false): return empty list. Aug 14 13:39:02 stt300 NetworkManager[1181]: Ifupdown: get unmanaged devices count: 0 Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> found WiFi radio killswitch rfkill1 (at /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/ieee80211/phy0/rfkill1) (driver <unknown>) Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> found WiFi radio killswitch rfkill0 (at /sys/devices/platform/hp-wmi/rfkill/rfkill0) (driver hp-wmi) Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> WiFi enabled by radio killswitch; enabled by state file Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> WWAN enabled by radio killswitch; enabled by state file Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> WiMAX enabled by radio killswitch; enabled by state file Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> Networking is enabled by state file Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (eth0): carrier is OFF Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (eth0): new Ethernet device (driver: 'r8169' ifindex: 2) Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (eth0): exported as /org/freedesktop/NetworkManager/Devices/0 Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (eth0): now managed Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (eth0): device state change: 1 -> 2 (reason 2) Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (eth0): bringing up device. Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (eth0): preparing device. Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (eth0): deactivating device (reason: 2). Aug 14 13:39:02 stt300 kernel: [ 15.481126] r8169 0000:01:00.0: eth0: link down Aug 14 13:39:02 stt300 kernel: [ 15.481524] ADDRCONF(NETDEV_UP): eth0: link is not ready Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/net/eth0 Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (wlan0): driver supports SSID scans (scan_capa 0x01). Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (wlan0): new 802.11 WiFi device (driver: 'brcmsmac' ifindex: 3) Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/1 Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (wlan0): now managed Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 1 -> 2 (reason 2) Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (wlan0): bringing up device. Aug 14 13:39:02 stt300 kernel: [ 15.571728] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: true (implement) Aug 14 13:39:02 stt300 kernel: [ 15.575016] ieee80211 phy0: wl_ops_config: change monitor mode: false (implement) Aug 14 13:39:02 stt300 kernel: [ 15.578639] ieee80211 phy0: wl_ops_config: change power-save mode: false (implement) Aug 14 13:39:02 stt300 kernel: [ 15.583276] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement) Aug 14 13:39:02 stt300 kernel: [ 15.587298] ADDRCONF(NETDEV_UP): wlan0: link is not ready Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (wlan0): preparing device. Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (wlan0): deactivating device (reason: 2). Aug 14 13:39:02 stt300 NetworkManager[1181]: supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed Aug 14 13:39:02 stt300 NetworkManager[1181]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring... Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> modem-manager is now available Aug 14 13:39:02 stt300 NetworkManager[1181]: <warn> bluez error getting default adapter: The name org.bluez was not provided by any .service files Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> Trying to start the supplicant... Aug 14 13:39:02 stt300 dbus[1166]: [system] Activating service name='fi.epitest.hostap.WPASupplicant' (using servicehelper) Aug 14 13:39:03 stt300 dbus[1166]: [system] Successfully activated service 'fi.epitest.hostap.WPASupplicant' Aug 14 13:39:03 stt300 NetworkManager[1181]: <info> (wlan0): supplicant manager state: down -> idle Aug 14 13:39:03 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 2 -> 3 (reason 0) Aug 14 13:39:03 stt300 NetworkManager[1181]: <info> (wlan0): supplicant interface state: starting -> ready Aug 14 13:39:03 stt300 kernel: [ 15.814384] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: false (implement) Aug 14 13:39:03 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:39:04 stt300 acpid: starting up with netlink and the input layer Aug 14 13:39:04 stt300 acpid: 42 rules loaded Aug 14 13:39:04 stt300 acpid: waiting for events: event logging is off Aug 14 13:39:04 stt300 kernel: [ 17.404728] apm: BIOS not found. Aug 14 13:39:05 stt300 avahi-daemon[1269]: Found user 'avahi' (UID 105) and group 'avahi' (GID 110). Aug 14 13:39:05 stt300 avahi-daemon[1269]: Successfully dropped root privileges. Aug 14 13:39:05 stt300 avahi-daemon[1269]: avahi-daemon 0.6.30 starting up. Aug 14 13:39:05 stt300 avahi-daemon[1269]: Successfully called chroot(). Aug 14 13:39:05 stt300 avahi-daemon[1269]: Successfully dropped remaining capabilities. Aug 14 13:39:05 stt300 avahi-daemon[1269]: Loading service file /services/udisks.service. Aug 14 13:39:05 stt300 acpid: client connected from 1237[0:0] Aug 14 13:39:05 stt300 acpid: 1 client rule loaded Aug 14 13:39:05 stt300 avahi-daemon[1269]: Network interface enumeration completed. Aug 14 13:39:05 stt300 avahi-daemon[1269]: Registering HINFO record with values 'I686'/'LINUX'. Aug 14 13:39:05 stt300 avahi-daemon[1269]: Server startup complete. Host name is stt300.local. Local service cookie is 3365141641. Aug 14 13:39:05 stt300 avahi-daemon[1269]: Service "stt300" (/services/udisks.service) successfully established. Aug 14 13:39:05 stt300 bluetoothd[1280]: Bluetooth daemon 4.94 Aug 14 13:39:05 stt300 bluetoothd[1280]: Starting SDP server Aug 14 13:39:05 stt300 kernel: [ 18.522557] Bluetooth: Core ver 2.16 Aug 14 13:39:05 stt300 kernel: [ 18.522637] NET: Registered protocol family 31 Aug 14 13:39:05 stt300 kernel: [ 18.522644] Bluetooth: HCI device and connection manager initialized Aug 14 13:39:05 stt300 kernel: [ 18.522651] Bluetooth: HCI socket layer initialized Aug 14 13:39:05 stt300 kernel: [ 18.522656] Bluetooth: L2CAP socket layer initialized Aug 14 13:39:05 stt300 kernel: [ 18.522762] Bluetooth: SCO socket layer initialized Aug 14 13:39:05 stt300 kernel: [ 18.552815] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Aug 14 13:39:05 stt300 kernel: [ 18.552823] Bluetooth: BNEP filters: protocol multicast Aug 14 13:39:05 stt300 kernel: [ 18.590539] Bluetooth: RFCOMM TTY layer initialized Aug 14 13:39:05 stt300 kernel: [ 18.590553] Bluetooth: RFCOMM socket layer initialized Aug 14 13:39:05 stt300 kernel: [ 18.590559] Bluetooth: RFCOMM ver 1.11 Aug 14 13:39:05 stt300 NetworkManager[1181]: <warn> bluez error getting default adapter: No such adapter Aug 14 13:39:06 stt300 /usr/sbin/cron[1342]: (CRON) INFO (pidfile fd = 3) Aug 14 13:39:06 stt300 /usr/sbin/cron[1343]: (CRON) STARTUP (fork ok) Aug 14 13:39:06 stt300 /usr/sbin/cron[1343]: (CRON) INFO (Running @reboot jobs) Aug 14 13:39:07 stt300 kernel: [ 20.145048] lp: driver loaded but no devices found Aug 14 13:39:07 stt300 udev-configure-printer: add /module/lp Aug 14 13:39:07 stt300 udev-configure-printer: Failed to get parent Aug 14 13:39:07 stt300 kernel: [ 20.567047] ppdev: user-space parallel port driver Aug 14 13:39:09 stt300 dbus[1166]: [system] Activating service name='org.freedesktop.ConsoleKit' (using servicehelper) Aug 14 13:39:10 stt300 dbus[1166]: [system] Successfully activated service 'org.freedesktop.ConsoleKit' Aug 14 13:39:11 stt300 kernel: [ 24.039332] cpufreq-nforce2: No nForce2 chipset. Aug 14 13:39:11 stt300 kernel: [ 24.200436] p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible. Aug 14 13:39:11 stt300 kernel: [ 24.200502] ondemand governor failed, too long transition latency of HW, fallback to performance governor Aug 14 13:39:11 stt300 kernel: [ 24.200543] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available Aug 14 13:39:12 stt300 kernel: [ 24.676635] powernow: This module only works with AMD K7 CPUs Aug 14 13:39:13 stt300 kernel: [ 25.683356] ondemand governor failed, too long transition latency of HW, fallback to performance governor Aug 14 13:39:13 stt300 kernel: [ 25.687148] ondemand governor failed, too long transition latency of HW, fallback to performance governor Aug 14 13:39:16 stt300 dbus[1166]: [system] Activating service name='org.freedesktop.UPower' (using servicehelper) Aug 14 13:39:16 stt300 dbus[1166]: [system] Successfully activated service 'org.freedesktop.UPower' Aug 14 13:39:19 stt300 dbus[1166]: [system] Activating service name='org.freedesktop.UDisks' (using servicehelper) Aug 14 13:39:19 stt300 dbus[1166]: [system] Successfully activated service 'org.freedesktop.UDisks' Aug 14 13:39:23 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:39:25 stt300 dbus[1166]: [system] Activating service name='org.gnome.ClockApplet.Mechanism' (using servicehelper) Aug 14 13:39:26 stt300 dbus[1166]: [system] Successfully activated service 'org.gnome.ClockApplet.Mechanism' Aug 14 13:39:31 stt300 dbus[1166]: [system] Activating service name='org.debian.apt' (using servicehelper) Aug 14 13:39:33 stt300 AptDaemon: INFO: Initializing daemon Aug 14 13:39:33 stt300 dbus[1166]: [system] Successfully activated service 'org.debian.apt' Aug 14 13:39:53 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation (wlan0) starting connection 'Auto WLAN_B5' Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 3 -> 4 (reason 0) Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started... Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting... Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 4 -> 5 (reason 0) Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation (wlan0/wireless): access point 'Auto WLAN_B5' has security, but secrets are required. Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 5 -> 6 (reason 0) Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete. Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started... Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 6 -> 4 (reason 0) Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting... Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 4 -> 5 (reason 0) Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation (wlan0/wireless): connection 'Auto WLAN_B5' has security, and secrets exist. No new secrets needed. Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Config: added 'ssid' value 'WLAN_B5' Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Config: added 'scan_ssid' value '1' Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Config: added 'key_mgmt' value 'WPA-PSK' Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Config: added 'psk' value '<omitted>' Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete. Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Config: set interface ap_scan to 1 Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:00 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:01 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:01 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:01 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:02 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:02 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:02 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:03 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:03 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:03 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:04 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:04 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:04 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:05 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:05 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:05 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:06 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:06 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:06 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:07 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:07 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:07 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:08 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:08 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:08 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:09 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:09 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:09 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:10 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:10 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:10 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:11 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:11 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:11 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:12 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:12 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:12 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:13 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:13 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:13 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:14 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:14 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:14 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:15 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:15 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:15 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:16 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:16 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:16 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:17 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:17 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:17 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:18 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:18 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:18 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:19 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:19 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:19 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:20 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:20 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:20 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:21 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:21 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:21 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:22 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:22 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:22 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:23 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:23 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:23 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:24 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:24 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:24 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:25 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:25 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:25 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:26 stt300 NetworkManager[1181]: <warn> Activation (wlan0/wireless): association took too long. Aug 14 13:40:26 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 5 -> 6 (reason 0) Aug 14 13:40:26 stt300 NetworkManager[1181]: <warn> Activation (wlan0/wireless): asking for new secrets Aug 14 13:40:26 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:26 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:26 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:27 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:27 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:27 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:28 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:28 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:28 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started... Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 6 -> 4 (reason 0) Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting... Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 4 -> 5 (reason 0) Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> Activation (wlan0/wireless): connection 'Auto WLAN_B5' has security, and secrets exist. No new secrets needed. Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> Config: added 'ssid' value 'WLAN_B5' Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> Config: added 'scan_ssid' value '1' Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> Config: added 'key_mgmt' value 'WPA-PSK' Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> Config: added 'psk' value '<omitted>' Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete. Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> Config: set interface ap_scan to 1 Aug 14 13:40:29 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:30 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:30 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:30 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:31 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:31 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:31 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:32 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:32 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:32 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:33 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:33 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:33 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:34 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:34 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:34 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:35 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:35 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:35 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:36 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:36 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:36 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:37 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:37 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:37 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:38 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:38 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:38 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:39 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:39 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:39 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:40 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:40 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:40 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:41 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:41 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:41 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:42 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:42 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:42 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:43 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:43 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:43 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:44 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:44 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:44 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:45 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:45 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:45 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:46 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:46 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:46 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:47 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:47 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:47 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:48 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:48 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:48 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:49 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:49 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:49 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:50 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:50 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:50 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:51 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:51 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:51 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:52 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:52 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:52 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:53 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:53 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:53 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:54 stt300 NetworkManager[1181]: <warn> Activation (wlan0/wireless): association took too long. Aug 14 13:40:54 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 5 -> 6 (reason 0) Aug 14 13:40:54 stt300 NetworkManager[1181]: <warn> Activation (wlan0/wireless): asking for new secrets Aug 14 13:40:54 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:54 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:54 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:55 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:55 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:55 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:56 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:56 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:56 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started... Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 6 -> 4 (reason 0) Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting... Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 4 -> 5 (reason 0) Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> Activation (wlan0/wireless): connection 'Auto WLAN_B5' has security, and secrets exist. No new secrets needed. Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> Config: added 'ssid' value 'WLAN_B5' Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> Config: added 'scan_ssid' value '1' Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> Config: added 'key_mgmt' value 'WPA-PSK' Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> Config: added 'psk' value '<omitted>' Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete. Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> Config: set interface ap_scan to 1 Aug 14 13:40:57 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:58 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:58 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:58 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:40:59 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:40:59 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:40:59 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:00 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:00 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:00 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:01 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:01 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:01 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:02 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:02 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:02 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:03 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:03 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:03 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:04 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:04 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:04 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:05 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:05 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:05 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:06 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:06 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:06 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:07 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:07 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:07 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:08 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:08 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:08 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:09 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:09 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:09 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:10 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:10 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:10 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:11 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:11 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:11 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:12 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:12 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:12 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:13 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:13 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:13 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:14 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:14 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:14 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:15 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:15 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:15 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:16 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:16 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:16 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:17 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:17 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:17 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:18 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:18 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:18 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:19 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:19 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:19 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:20 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:20 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:20 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:21 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:21 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:21 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:22 stt300 NetworkManager[1181]: <warn> Activation (wlan0/wireless): association took too long. Aug 14 13:41:22 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 5 -> 6 (reason 0) Aug 14 13:41:22 stt300 NetworkManager[1181]: <warn> Activation (wlan0/wireless): asking for new secrets Aug 14 13:41:22 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:22 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:22 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:23 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:23 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:23 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:24 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:24 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:24 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started... Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 6 -> 4 (reason 0) Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting... Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 4 -> 5 (reason 0) Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> Activation (wlan0/wireless): connection 'Auto WLAN_B5' has security, and secrets exist. No new secrets needed. Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> Config: added 'ssid' value 'WLAN_B5' Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> Config: added 'scan_ssid' value '1' Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> Config: added 'key_mgmt' value 'WPA-PSK' Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> Config: added 'psk' value '<omitted>' Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete. Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> Config: set interface ap_scan to 1 Aug 14 13:41:25 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:26 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:26 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:26 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:27 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:27 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:27 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:28 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:28 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:28 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:29 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:29 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:29 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:30 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:30 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:30 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:31 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:31 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:31 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:32 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:32 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:32 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:33 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:33 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:33 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:34 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:34 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:34 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:35 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:41:35 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:41:35 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:41:36 stt300 wpa_supplicant[1204]: Trying to associate with 00:23:f8:9d:ad:11 (SSID='WLAN_B5' freq=2437 MHz) Aug 14 13:41:36 stt300 kernel: [ 169.077763] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: true (implement) Aug 14 13:41:36 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> associating Aug 14 13:41:36 stt300 kernel: [ 169.082536] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: false (implement) Aug 14 13:41:36 stt300 kernel: [ 169.082553] wlan0: authenticate with 00:23:f8:9d:ad:11 (try 1) Aug 14 13:41:36 stt300 kernel: [ 169.085718] wlan0: authenticated Aug 14 13:41:36 stt300 kernel: [ 169.085783] wlan0: associate with 00:23:f8:9d:ad:11 (try 1) Aug 14 13:41:36 stt300 wpa_supplicant[1204]: Associated with 00:23:f8:9d:ad:11 Aug 14 13:41:36 stt300 kernel: [ 169.092294] wlan0: RX AssocResp from 00:23:f8:9d:ad:11 (capab=0x471 status=0 aid=1) Aug 14 13:41:36 stt300 kernel: [ 169.092304] wlan0: associated Aug 14 13:41:36 stt300 kernel: [ 169.094072] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement) Aug 14 13:41:36 stt300 kernel: [ 169.094089] ieee80211 phy0: brcmsmac: wl_ops_bss_info_changed: associated Aug 14 13:41:36 stt300 kernel: [ 169.094120] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement) Aug 14 13:41:36 stt300 kernel: [ 169.094637] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Aug 14 13:41:36 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: associating -> associated Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: associated -> 4-way handshake Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: 4-way handshake -> group handshake Aug 14 13:41:37 stt300 wpa_supplicant[1204]: WPA: Key negotiation completed with 00:23:f8:9d:ad:11 [PTK=TKIP GTK=TKIP] Aug 14 13:41:37 stt300 wpa_supplicant[1204]: CTRL-EVENT-CONNECTED - Connection to 00:23:f8:9d:ad:11 completed (auth) [id=3 id_str=] Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: group handshake -> completed Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'WLAN_B5'. Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled. Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started... Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 5 -> 7 (reason 0) Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds) Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> dhclient started with pid 2175 Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete. Aug 14 13:41:37 stt300 dhclient: Internet Systems Consortium DHCP Client 4.1.1-P1 Aug 14 13:41:37 stt300 dhclient: Copyright 2004-2010 Internet Systems Consortium. Aug 14 13:41:37 stt300 dhclient: All rights reserved. Aug 14 13:41:37 stt300 dhclient: For info, please visit https://www.isc.org/software/dhcp/ Aug 14 13:41:37 stt300 dhclient: Aug 14 13:41:37 stt300 avahi-daemon[1269]: Joining mDNS multicast group on interface wlan0.IPv6 with address fe80::ae81:12ff:fe34:6963. Aug 14 13:41:37 stt300 avahi-daemon[1269]: New relevant interface wlan0.IPv6 for mDNS. Aug 14 13:41:37 stt300 avahi-daemon[1269]: Registering new address record for fe80::ae81:12ff:fe34:6963 on wlan0.*. Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> (wlan0): DHCPv4 state changed nbi -> preinit Aug 14 13:41:37 stt300 dhclient: Listening on LPF/wlan0/ac:81:12:34:69:63 Aug 14 13:41:37 stt300 dhclient: Sending on LPF/wlan0/ac:81:12:34:69:63 Aug 14 13:41:37 stt300 dhclient: Sending on Socket/fallback Aug 14 13:41:37 stt300 dhclient: DHCPREQUEST on wlan0 to 255.255.255.255 port 67 Aug 14 13:41:37 stt300 dhclient: DHCPACK from 192.168.0.79 Aug 14 13:41:37 stt300 dhclient: bound to 192.168.0.155 -- renewal in 39507 seconds. Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> (wlan0): DHCPv4 state changed preinit -> reboot Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled... Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started... Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> address 192.168.0.155 Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> prefix 24 (255.255.255.0) Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> gateway 192.168.0.79 Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> nameserver '80.58.0.33' Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> nameserver '80.58.32.94' Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> domain name 'lan' Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> Scheduling stage 5 Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled... Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> Done scheduling stage 5 Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete. Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started... Aug 14 13:41:37 stt300 avahi-daemon[1269]: Joining mDNS multicast group on interface wlan0.IPv4 with address 192.168.0.155. Aug 14 13:41:38 stt300 kernel: [ 170.679777] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) Aug 14 13:41:37 stt300 avahi-daemon[1269]: New relevant interface wlan0.IPv4 for mDNS. Aug 14 13:41:37 stt300 avahi-daemon[1269]: Registering new address record for 192.168.0.155 on wlan0.IPv4. Aug 14 13:41:39 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 7 -> 8 (reason 0) Aug 14 13:41:39 stt300 NetworkManager[1181]: <info> (wlan0): roamed from BSSID 00:23:F8:9D:AD:11 (WLAN_B5) to 00:23:F8:9D:AD:11 (WLAN_B5) Aug 14 13:41:39 stt300 NetworkManager[1181]: <info> Policy set 'Auto WLAN_B5' (wlan0) as default for IPv4 routing and DNS. Aug 14 13:41:39 stt300 NetworkManager[1181]: <info> Activation (wlan0) successful, device activated. Aug 14 13:41:39 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete. Aug 14 13:41:39 stt300 dbus[1166]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) Aug 14 13:41:39 stt300 dbus[1166]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Aug 14 13:41:46 stt300 kernel: [ 179.600114] wlan0: no IPv6 routers present Aug 14 13:43:57 stt300 anacron[2444]: Anacron 2.3 started on 2011-08-14 Aug 14 13:43:57 stt300 anacron[2444]: Normal exit (0 jobs run) Aug 14 13:44:34 stt300 AptDaemon: INFO: Quiting due to inactivity Aug 14 13:44:34 stt300 AptDaemon: INFO: Shutdown was requested
Aug 14 13:50:19 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 8 -> 3 (reason 39) Aug 14 13:50:19 stt300 NetworkManager[1181]: <info> (wlan0): deactivating device (reason: 39). Aug 14 13:50:19 stt300 NetworkManager[1181]: <info> (wlan0): canceled DHCP transaction, DHCP client pid 2175 Aug 14 13:50:19 stt300 kernel: [ 692.402985] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement) Aug 14 13:50:19 stt300 kernel: [ 692.403004] ieee80211 phy0: brcmsmac: wl_ops_bss_info_changed: disassociated Aug 14 13:50:19 stt300 kernel: [ 692.403020] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled false, count 1 (implement) Aug 14 13:50:19 stt300 kernel: [ 692.403031] wlan0: deauthenticating from 00:23:f8:9d:ad:11 by local choice (reason=3) Aug 14 13:50:19 stt300 kernel: [ 692.452098] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: true (implement) Aug 14 13:50:21 stt300 kernel: [ 693.764138] cfg80211: Calling CRDA to update world regulatory domain Aug 14 13:50:21 stt300 avahi-daemon[1269]: Withdrawing address record for 192.168.0.155 on wlan0. Aug 14 13:50:21 stt300 wpa_supplicant[1204]: CTRL-EVENT-DISCONNECTED bssid=00:00:00:00:00:00 reason=0 Aug 14 13:50:21 stt300 avahi-daemon[1269]: Leaving mDNS multicast group on interface wlan0.IPv4 with address 192.168.0.155. Aug 14 13:50:21 stt300 avahi-daemon[1269]: Interface wlan0.IPv4 no longer relevant for mDNS. Aug 14 13:50:21 stt300 dbus[1166]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) Aug 14 13:50:21 stt300 kernel: [ 693.796897] cfg80211: World regulatory domain updated: Aug 14 13:50:21 stt300 kernel: [ 693.796908] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Aug 14 13:50:21 stt300 kernel: [ 693.796918] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 13:50:21 stt300 kernel: [ 693.796928] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Aug 14 13:50:21 stt300 kernel: [ 693.796937] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Aug 14 13:50:21 stt300 kernel: [ 693.796946] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 13:50:21 stt300 kernel: [ 693.796955] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 13:50:21 stt300 kernel: [ 693.796996] cfg80211: Calling CRDA for country: EU Aug 14 13:50:21 stt300 dbus[1166]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Aug 14 13:50:21 stt300 kernel: [ 693.831233] cfg80211: Regulatory domain changed to country: EU Aug 14 13:50:21 stt300 kernel: [ 693.831243] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Aug 14 13:50:21 stt300 kernel: [ 693.831253] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) Aug 14 13:50:21 stt300 kernel: [ 693.831262] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) Aug 14 13:50:21 stt300 kernel: [ 693.831271] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) Aug 14 13:50:21 stt300 kernel: [ 693.831280] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) Aug 14 13:50:39 stt300 avahi-daemon[1269]: Interface wlan0.IPv6 no longer relevant for mDNS. Aug 14 13:50:39 stt300 avahi-daemon[1269]: Leaving mDNS multicast group on interface wlan0.IPv6 with address fe80::ae81:12ff:fe34:6963. Aug 14 13:50:39 stt300 avahi-daemon[1269]: Withdrawing address record for fe80::ae81:12ff:fe34:6963 on wlan0. Aug 14 13:50:39 stt300 avahi-daemon[1269]: Withdrawing workstation service for wlan0. Aug 14 13:50:39 stt300 NetworkManager[1181]: SCPlugin-Ifupdown: devices removed (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/wlan0, iface: wlan0) Aug 14 13:50:39 stt300 NetworkManager[1181]: <info> (wlan0): now unmanaged Aug 14 13:50:39 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 3 -> 1 (reason 36) Aug 14 13:50:39 stt300 NetworkManager[1181]: <info> (wlan0): cleaning up... Aug 14 13:50:39 stt300 NetworkManager[1181]: <info> radio killswitch /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/ieee80211/phy0/rfkill1 disappeared Aug 14 13:50:39 stt300 kernel: [ 712.176213] brcmsmac 0000:02:00.0: PCI INT A disabled Aug 14 13:50:39 stt300 wpa_supplicant[1204]: Could not read interface wlan0 flags: No such device Aug 14 13:50:50 stt300 kernel: [ 723.594513] cfg80211: Calling CRDA to update world regulatory domain Aug 14 13:50:50 stt300 kernel: [ 723.610205] brcmutil: module is from the staging directory, the quality is unknown, you have been warned. Aug 14 13:50:50 stt300 kernel: [ 723.613763] brcmsmac: module is from the staging directory, the quality is unknown, you have been warned. Aug 14 13:50:50 stt300 kernel: [ 723.619364] cfg80211: World regulatory domain updated: Aug 14 13:50:50 stt300 kernel: [ 723.619374] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Aug 14 13:50:50 stt300 kernel: [ 723.619385] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 13:50:50 stt300 kernel: [ 723.619394] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Aug 14 13:50:50 stt300 kernel: [ 723.619403] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Aug 14 13:50:50 stt300 kernel: [ 723.619412] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 13:50:50 stt300 kernel: [ 723.619421] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 13:50:50 stt300 kernel: [ 723.626928] brcmsmac 0000:02:00.0: bus 2 slot 0 func 0 irq 17 Aug 14 13:50:50 stt300 kernel: [ 723.626964] brcmsmac 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Aug 14 13:50:50 stt300 kernel: [ 723.626985] brcmsmac 0000:02:00.0: setting latency timer to 64 Aug 14 13:50:50 stt300 kernel: [ 723.655812] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' Aug 14 13:50:50 stt300 kernel: [ 723.658781] cfg80211: Calling CRDA for country: US Aug 14 13:50:50 stt300 NetworkManager[1181]: <info> found WiFi radio killswitch rfkill2 (at /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/ieee80211/phy0/rfkill2) (driver <unknown>) Aug 14 13:50:51 stt300 NetworkManager[1181]: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/wlan0, iface: wlan0) Aug 14 13:50:51 stt300 NetworkManager[1181]: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found. Aug 14 13:50:51 stt300 NetworkManager[1181]: <info> (wlan0): driver supports SSID scans (scan_capa 0x01). Aug 14 13:50:51 stt300 NetworkManager[1181]: <info> (wlan0): new 802.11 WiFi device (driver: 'brcmsmac' ifindex: 4) Aug 14 13:50:51 stt300 NetworkManager[1181]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/2 Aug 14 13:50:51 stt300 NetworkManager[1181]: <info> (wlan0): now managed Aug 14 13:50:51 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 1 -> 2 (reason 2) Aug 14 13:50:51 stt300 NetworkManager[1181]: <info> (wlan0): bringing up device. Aug 14 13:50:51 stt300 kernel: [ 723.708363] cfg80211: Regulatory domain changed to country: US Aug 14 13:50:51 stt300 kernel: [ 723.708372] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Aug 14 13:50:51 stt300 kernel: [ 723.708381] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) Aug 14 13:50:51 stt300 kernel: [ 723.708390] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) Aug 14 13:50:51 stt300 kernel: [ 723.708399] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 13:50:51 stt300 kernel: [ 723.708407] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 13:50:51 stt300 kernel: [ 723.708416] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 13:50:51 stt300 kernel: [ 723.708424] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) Aug 14 13:50:51 stt300 kernel: [ 723.708453] cfg80211: Calling CRDA for country: EU Aug 14 13:50:51 stt300 kernel: [ 723.724639] cfg80211: Regulatory domain changed to country: EU Aug 14 13:50:51 stt300 kernel: [ 723.724648] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Aug 14 13:50:51 stt300 kernel: [ 723.724657] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) Aug 14 13:50:51 stt300 kernel: [ 723.724665] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) Aug 14 13:50:51 stt300 kernel: [ 723.724673] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) Aug 14 13:50:51 stt300 kernel: [ 723.724681] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) Aug 14 13:50:51 stt300 kernel: [ 723.747941] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: true (implement) Aug 14 13:50:51 stt300 kernel: [ 723.747967] ieee80211 phy0: wl_ops_config: change monitor mode: false (implement) Aug 14 13:50:51 stt300 kernel: [ 723.747976] ieee80211 phy0: wl_ops_config: change power-save mode: false (implement) Aug 14 13:50:51 stt300 NetworkManager[1181]: <info> (wlan0): preparing device. Aug 14 13:50:51 stt300 NetworkManager[1181]: <info> (wlan0): deactivating device (reason: 2). Aug 14 13:50:51 stt300 kernel: [ 723.748827] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement) Aug 14 13:50:51 stt300 kernel: [ 723.749535] ADDRCONF(NETDEV_UP): wlan0: link is not ready Aug 14 13:50:51 stt300 NetworkManager[1181]: <info> (wlan0): supplicant interface state: starting -> ready Aug 14 13:50:51 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 2 -> 3 (reason 42) Aug 14 13:50:51 stt300 kernel: [ 723.797297] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: false (implement) Aug 14 13:50:51 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:10 stt300 NetworkManager[1181]: <info> Activation (wlan0) starting connection 'Auto WLAN_B5' Aug 14 13:51:10 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 3 -> 4 (reason 0) Aug 14 13:51:10 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... Aug 14 13:51:10 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started... Aug 14 13:51:10 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... Aug 14 13:51:10 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. Aug 14 13:51:10 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting... Aug 14 13:51:10 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 4 -> 5 (reason 0) Aug 14 13:51:10 stt300 NetworkManager[1181]: <info> Activation (wlan0/wireless): access point 'Auto WLAN_B5' has security, but secrets are required. Aug 14 13:51:10 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 5 -> 6 (reason 0) Aug 14 13:51:10 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete. Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started... Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 6 -> 4 (reason 0) Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting... Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 4 -> 5 (reason 0) Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> Activation (wlan0/wireless): connection 'Auto WLAN_B5' has security, and secrets exist. No new secrets needed. Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> Config: added 'ssid' value 'WLAN_B5' Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> Config: added 'scan_ssid' value '1' Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> Config: added 'key_mgmt' value 'WPA-PSK' Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> Config: added 'psk' value '<omitted>' Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete. Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> Config: set interface ap_scan to 1 Aug 14 13:51:11 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:12 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:12 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:12 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:13 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:13 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:13 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:14 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:14 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:14 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:15 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:15 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:15 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:16 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:16 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:16 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:17 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:17 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:17 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:18 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:18 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:18 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:19 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:19 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:19 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:20 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:20 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:20 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:21 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:21 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:21 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:22 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:22 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:22 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:23 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:23 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:23 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:24 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:24 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:24 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:25 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:25 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:25 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:26 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:26 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:26 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:27 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:27 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:27 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:28 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:28 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:28 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:29 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:29 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:29 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:30 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:30 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:30 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:31 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:31 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:31 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:32 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:32 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:32 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:33 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:33 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:33 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:34 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:34 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:34 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:35 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:35 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:35 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:36 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:36 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:36 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:36 stt300 NetworkManager[1181]: <warn> Activation (wlan0/wireless): association took too long. Aug 14 13:51:36 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 5 -> 6 (reason 0) Aug 14 13:51:36 stt300 NetworkManager[1181]: <warn> Activation (wlan0/wireless): asking for new secrets Aug 14 13:51:37 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:37 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:37 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:38 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started... Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 6 -> 4 (reason 0) Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting... Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 4 -> 5 (reason 0) Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> Activation (wlan0/wireless): connection 'Auto WLAN_B5' has security, and secrets exist. No new secrets needed. Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> Config: added 'ssid' value 'WLAN_B5' Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> Config: added 'scan_ssid' value '1' Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> Config: added 'key_mgmt' value 'WPA-PSK' Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> Config: added 'psk' value '<omitted>' Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete. Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> Config: set interface ap_scan to 1 Aug 14 13:51:39 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:39 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:39 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:40 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:40 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:40 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:41 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:41 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:41 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:42 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:42 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:42 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:43 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:43 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:43 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:44 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:44 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:44 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:45 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:45 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:45 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:46 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:46 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:46 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:47 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:47 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:47 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:48 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:48 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:48 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:49 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:49 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:49 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:50 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:50 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:50 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:51 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:51 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:51 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:52 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:52 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:52 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:53 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:53 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:53 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:54 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:54 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:54 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:55 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:55 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:55 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:56 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:56 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:56 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:57 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:57 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:57 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:58 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:58 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:58 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:51:59 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:51:59 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:51:59 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:00 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:00 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:00 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:01 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:01 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:01 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:02 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:02 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:02 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:03 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:03 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:03 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:04 stt300 NetworkManager[1181]: <warn> Activation (wlan0/wireless): association took too long. Aug 14 13:52:04 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 5 -> 6 (reason 0) Aug 14 13:52:04 stt300 NetworkManager[1181]: <warn> Activation (wlan0/wireless): asking for new secrets Aug 14 13:52:04 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:04 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:04 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:05 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:05 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:05 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:06 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started... Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 6 -> 4 (reason 0) Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting... Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 4 -> 5 (reason 0) Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> Activation (wlan0/wireless): connection 'Auto WLAN_B5' has security, and secrets exist. No new secrets needed. Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> Config: added 'ssid' value 'WLAN_B5' Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> Config: added 'scan_ssid' value '1' Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> Config: added 'key_mgmt' value 'WPA-PSK' Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> Config: added 'psk' value '<omitted>' Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete. Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> Config: set interface ap_scan to 1 Aug 14 13:52:07 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:07 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:07 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:08 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:08 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:08 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:09 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:09 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:09 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:10 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:10 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:10 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:11 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:11 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:11 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:12 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:12 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:12 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:13 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:13 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:13 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:14 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:14 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:14 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:15 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:15 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:15 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:16 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:16 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:16 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:17 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:17 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:17 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:18 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:18 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:18 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:19 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:19 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:19 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:20 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:20 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:20 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:21 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:21 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:21 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:22 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:22 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:22 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:23 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:23 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:23 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:24 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:24 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:24 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:25 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:25 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:25 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:26 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:26 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:26 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:27 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:27 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:27 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:28 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:28 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:28 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:29 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:29 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:29 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:30 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:30 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:30 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:31 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:31 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:31 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:32 stt300 NetworkManager[1181]: <warn> Activation (wlan0/wireless): association took too long. Aug 14 13:52:32 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 5 -> 6 (reason 0) Aug 14 13:52:32 stt300 NetworkManager[1181]: <warn> Activation (wlan0/wireless): asking for new secrets Aug 14 13:52:32 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:32 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:32 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:33 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:33 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:33 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started... Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 6 -> 4 (reason 0) Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting... Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 4 -> 5 (reason 0) Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> Activation (wlan0/wireless): connection 'Auto WLAN_B5' has security, and secrets exist. No new secrets needed. Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> Config: added 'ssid' value 'WLAN_B5' Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> Config: added 'scan_ssid' value '1' Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> Config: added 'key_mgmt' value 'WPA-PSK' Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> Config: added 'psk' value '<omitted>' Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete. Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> Config: set interface ap_scan to 1 Aug 14 13:52:34 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:35 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:35 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:35 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:36 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:36 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:36 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:37 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:37 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:37 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:38 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:38 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:38 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:39 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:39 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:39 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:40 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:40 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:40 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:41 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:41 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:41 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:42 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:42 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:42 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:43 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:43 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:43 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:44 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:44 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:44 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:45 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:45 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:45 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:46 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:46 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:46 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:47 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:47 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:47 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:48 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:48 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:48 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:49 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:49 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:49 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:50 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:50 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:50 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:51 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:51 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:51 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:52 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:52 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:52 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:53 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:53 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:53 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:54 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:54 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:54 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:55 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:55 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:55 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:56 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:56 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:56 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:57 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:57 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:57 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:58 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:52:58 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: inactive -> scanning Aug 14 13:52:58 stt300 NetworkManager[1181]: <info> (wlan0): supplicant connection state: scanning -> inactive Aug 14 13:52:59 stt300 NetworkManager[1181]: <warn> Activation (wlan0/wireless): association took too long. Aug 14 13:52:59 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 5 -> 9 (reason 7) Aug 14 13:52:59 stt300 NetworkManager[1181]: <warn> Activation (wlan0) failed for access point (WLAN_B5) Aug 14 13:52:59 stt300 NetworkManager[1181]: <info> Marking connection 'Auto WLAN_B5' invalid. Aug 14 13:52:59 stt300 NetworkManager[1181]: <warn> Activation (wlan0) failed. Aug 14 13:52:59 stt300 NetworkManager[1181]: <info> (wlan0): device state change: 9 -> 3 (reason 0) Aug 14 13:52:59 stt300 NetworkManager[1181]: <info> (wlan0): deactivating device (reason: 0). Aug 14 13:52:59 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:00 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:01 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:02 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:03 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:04 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:05 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:06 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:07 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:08 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:09 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:10 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:11 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:12 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:13 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:14 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:15 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:16 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:17 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:18 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:19 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:20 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:21 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:22 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:23 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:24 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:25 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:26 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:27 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:28 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:29 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:30 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:31 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:32 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:33 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:34 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:35 stt300 wpa_supplicant[1204]: Failed to initiate AP scan. Aug 14 13:53:36 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
_______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
