[PATCH 1/3] Staging: rtl8192e: fixed style issues found by checkpatch.pl

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a patch to the r8180_93cx6.c file that fixes style issues
found by the checkpatch.pl tool
- extra spaces
- invalid comment style

Signed-off-by: Prashant P. Shah <pshah.mumbai@xxxxxxxxx>
---
 drivers/staging/rtl8192e/r8180_93cx6.c |   22 ++++++++++++++--------
 1 files changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/staging/rtl8192e/r8180_93cx6.c b/drivers/staging/rtl8192e/r8180_93cx6.c
index 55d4f56..ee07a15 100644
--- a/drivers/staging/rtl8192e/r8180_93cx6.c
+++ b/drivers/staging/rtl8192e/r8180_93cx6.c
@@ -23,12 +23,14 @@
 static void eprom_cs(struct r8192_priv *priv, short bit)
 {
 	if (bit)
+		/* enable EPROM */
 		write_nic_byte(priv, EPROM_CMD,
 			       (1<<EPROM_CS_SHIFT) |
-			       read_nic_byte(priv, EPROM_CMD)); //enable EPROM
+			       read_nic_byte(priv, EPROM_CMD));
 	else
+		/* disable EPROM */
 		write_nic_byte(priv, EPROM_CMD, read_nic_byte(priv, EPROM_CMD)
-			       &~(1<<EPROM_CS_SHIFT)); //disable EPROM
+			       &~(1<<EPROM_CS_SHIFT));
 
 	udelay(EPROM_DELAY);
 }
@@ -91,7 +93,7 @@ u32 eprom_read(struct r8192_priv *priv, u32 addr)
 	u32 ret;
 
 	ret = 0;
-        //enable EPROM programming
+	/* enable EPROM programming */
 	write_nic_byte(priv, EPROM_CMD,
 		       (EPROM_CMD_PROGRAM<<EPROM_CMD_OPERATING_MODE_SHIFT));
 	udelay(EPROM_DELAY);
@@ -120,13 +122,17 @@ u32 eprom_read(struct r8192_priv *priv, u32 addr)
 	eprom_send_bits_string(priv, read_cmd, 3);
 	eprom_send_bits_string(priv, addr_str, addr_len);
 
-	//keep chip pin D to low state while reading.
-	//I'm unsure if it is necessary, but anyway shouldn't hurt
+	/*
+	 * keep chip pin D to low state while reading.
+	 * I'm unsure if it is necessary, but anyway shouldn't hurt
+	 */
 	eprom_w(priv, 0);
 
 	for (i = 0; i < 16; i++) {
-		//eeprom needs a clk cycle between writing opcode&adr
-		//and reading data. (eeprom outs a dummy 0)
+		/*
+		 * eeprom needs a clk cycle between writing opcode&adr
+		 * and reading data. (eeprom outs a dummy 0)
+		 */
 		eprom_ck_cycle(priv);
 		ret |= (eprom_r(priv)<<(15-i));
 	}
@@ -134,7 +140,7 @@ u32 eprom_read(struct r8192_priv *priv, u32 addr)
 	eprom_cs(priv, 0);
 	eprom_ck_cycle(priv);
 
-	//disable EPROM programming
+	/* disable EPROM programming */
 	write_nic_byte(priv, EPROM_CMD,
 		       (EPROM_CMD_NORMAL<<EPROM_CMD_OPERATING_MODE_SHIFT));
 	return ret;
-- 
1.7.1

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel


[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux