This is a patch to the rtd520.c file that fixes up a printk warning found by the checkpatch.pl tool
Signed-off-by: Ravishankr <ravishakarkm32@xxxxxxxxx>
---
drivers/staging/comedi/drivers/rtd520.c | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index 7f09ed7..f7f4752 100644
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -29,8 +29,8 @@ Status: Works. Only tested on DM7520-8. Not SMP safe.
Configuration options:
[0] - PCI bus of device (optional)
- If bus/slot is not specified, the first available PCI
- device will be used.
+ If bus / slot is not specified, the first available PCI
+ device will be used.
[1] - PCI slot of device (optional)
*/
/*
@@ -186,7 +186,7 @@ Configuration options:
| PLX_DEMAND_MODE_BIT)
#define DMA_TRANSFER_BITS (\
-/* descriptors in PCI memory*/ PLX_DESC_IN_PCI_BIT \
+/* descriptors in PCI memory*/ PLX_DESC_IN_PCI_BIT \
/* interrupt at end of block */ | PLX_INTR_TERM_COUNT \
/* from board to PCI */ | PLX_XFER_LOCAL_TO_PCI)
@@ -869,7 +869,7 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
}
/* Show board configuration */
- printk("%s:", dev->board_name);
+ printk(KERN_INFO "%s:", dev->board_name);
/*
* Allocate the subdevice structures. alloc_subdevice() is a
@@ -958,7 +958,7 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
return ret;
}
dev->irq = devpriv->pci_dev->irq;
- printk("( irq=%u )", dev->irq);
+ printk(KERN_INFO "( irq=%u )", dev->irq);
ret = rtd520_probe_fifo_depth(dev);
if (ret < 0)
--
1.6.5.2
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
