The Hyper-V timesource driver is best integrated with Hyper-V detection code
since: (a) Linux guests running on Hyper-V need this timesource and (b)
by integrating with Hyper-V detection, we could minimize the code in the
timesource driver. Greg, you had helped me initially in getting the Hyper-V
detection code into the kernel (mshyperv.c). I am hoping you can take
this patch.
Signed-off-by: K. Y. Srinivasan <kys@xxxxxxxxxxxxx>
Signed-off-by: Haiyang Zhang <haiyangz@xxxxxxxxxxxxx>
---
arch/x86/kernel/cpu/mshyperv.c | 24 ++++++++
drivers/staging/hv/Makefile | 2 +-
drivers/staging/hv/hv_timesource.c | 102 ------------------------------------
3 files changed, 25 insertions(+), 103 deletions(-)
delete mode 100644 drivers/staging/hv/hv_timesource.c
diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
index d944bf6..c97f88d 100644
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -11,6 +11,8 @@
*/
#include <linux/types.h>
+#include <linux/time.h>
+#include <linux/clocksource.h>
#include <linux/module.h>
#include <asm/processor.h>
#include <asm/hypervisor.h>
@@ -36,6 +38,25 @@ static bool __init ms_hyperv_platform(void)
!memcmp("Microsoft Hv", hyp_signature, 12);
}
+static cycle_t read_hv_clock(struct clocksource *arg)
+{
+ cycle_t current_tick;
+ /*
+ * Read the partition counter to get the current tick count. This count
+ * is set to 0 when the partition is created and is incremented in
+ * 100 nanosecond units.
+ */
+ rdmsrl(HV_X64_MSR_TIME_REF_COUNT, current_tick);
+ return current_tick;
+}
+
+static struct clocksource hyperv_cs = {
+ .name = "hyperv_clocksource",
+ .rating = 400, /* use this when running on Hyperv*/
+ .read = read_hv_clock,
+ .mask = CLOCKSOURCE_MASK(64),
+};
+
static void __init ms_hyperv_init_platform(void)
{
/*
@@ -46,6 +67,9 @@ static void __init ms_hyperv_init_platform(void)
printk(KERN_INFO "HyperV: features 0x%x, hints 0x%x\n",
ms_hyperv.features, ms_hyperv.hints);
+
+
+ clocksource_register_hz(&hyperv_cs, NSEC_PER_SEC/100);
}
const __refconst struct hypervisor_x86 x86_hyper_ms_hyperv = {
diff --git a/drivers/staging/hv/Makefile b/drivers/staging/hv/Makefile
index bd176b1..3e0d7e6 100644
--- a/drivers/staging/hv/Makefile
+++ b/drivers/staging/hv/Makefile
@@ -1,4 +1,4 @@
-obj-$(CONFIG_HYPERV) += hv_vmbus.o hv_timesource.o
+obj-$(CONFIG_HYPERV) += hv_vmbus.o
obj-$(CONFIG_HYPERV_STORAGE) += hv_storvsc.o
obj-$(CONFIG_HYPERV_NET) += hv_netvsc.o
obj-$(CONFIG_HYPERV_UTILS) += hv_utils.o
diff --git a/drivers/staging/hv/hv_timesource.c b/drivers/staging/hv/hv_timesource.c
deleted file mode 100644
index 0efb049..0000000
--- a/drivers/staging/hv/hv_timesource.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * A clocksource for Linux running on HyperV.
- *
- *
- * Copyright (C) 2010, Novell, Inc.
- * Author : K. Y. Srinivasan <ksrinivasan@xxxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/version.h>
-#include <linux/clocksource.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/dmi.h>
-#include <asm/hyperv.h>
-#include <asm/mshyperv.h>
-#include <asm/hypervisor.h>
-
-#define HV_CLOCK_SHIFT 22
-
-static cycle_t read_hv_clock(struct clocksource *arg)
-{
- cycle_t current_tick;
- /*
- * Read the partition counter to get the current tick count. This count
- * is set to 0 when the partition is created and is incremented in
- * 100 nanosecond units.
- */
- rdmsrl(HV_X64_MSR_TIME_REF_COUNT, current_tick);
- return current_tick;
-}
-
-static struct clocksource hyperv_cs = {
- .name = "hyperv_clocksource",
- .rating = 400, /* use this when running on Hyperv*/
- .read = read_hv_clock,
- .mask = CLOCKSOURCE_MASK(64),
- /*
- * The time ref counter in HyperV is in 100ns units.
- * The definition of mult is:
- * mult/2^shift = ns/cyc = 100
- * mult = (100 << shift)
- */
- .mult = (100 << HV_CLOCK_SHIFT),
- .shift = HV_CLOCK_SHIFT,
-};
-
-static const struct dmi_system_id __initconst
-hv_timesource_dmi_table[] __maybe_unused = {
- {
- .ident = "Hyper-V",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Virtual Machine"),
- DMI_MATCH(DMI_BOARD_NAME, "Virtual Machine"),
- },
- },
- { },
-};
-MODULE_DEVICE_TABLE(dmi, hv_timesource_dmi_table);
-
-static const struct pci_device_id __initconst
-hv_timesource_pci_table[] __maybe_unused = {
- { PCI_DEVICE(0x1414, 0x5353) }, /* VGA compatible controller */
- { 0 }
-};
-MODULE_DEVICE_TABLE(pci, hv_timesource_pci_table);
-
-
-static int __init init_hv_clocksource(void)
-{
- if ((x86_hyper != &x86_hyper_ms_hyperv) ||
- !(ms_hyperv.features & HV_X64_MSR_TIME_REF_COUNT_AVAILABLE))
- return -ENODEV;
-
- if (!dmi_check_system(hv_timesource_dmi_table))
- return -ENODEV;
-
- pr_info("Registering HyperV clock source\n");
- return clocksource_register(&hyperv_cs);
-}
-
-module_init(init_hv_clocksource);
-MODULE_DESCRIPTION("HyperV based clocksource");
-MODULE_AUTHOR("K. Y. Srinivasan <ksrinivasan@xxxxxxxxxx>");
-MODULE_LICENSE("GPL");
--
1.7.4.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
