On Mon, Jun 13, 2011 at 03:27:17PM +0300, Dan Carpenter wrote: > On Mon, Jun 13, 2011 at 04:18:29PM +0400, Kirill Smelkov wrote: > > Both bars=0 and bars=1 were described as meaning to display bars on > > signal lost. Actually bars=1 means "display bars", but bars=0 means > > display raw source as is (usually black screen). > > Your description up here is much better than the one in the README. > Maybe just include yours and delete the original. Thanks for head ups. Something like this: ---- 8< ---- From: Kirill Smelkov <kirr@xxxxxxxxxx> Date: Mon, 13 Jun 2011 15:09:31 +0400 Subject: [PATCH v2] staging/easycap: Fix thinko in "bars" module option description Both bars=0 and bars=1 were described as meaning to display bars on signal lost. Actually bars=1 means "display bars", but bars=0 means display raw source as is (usually black screen). Instead of changing bars=0 to "_no_ testcard bars ..." as suggested by Dan Carpenter reword the whole bars description for clarity. Cc: Tomas Winkler <tomas.winkler@xxxxxxxxx> Cc: Mike Thomas <rmthomas@xxxxxxxxxxx> Cc: Dan Carpenter <error27@xxxxxxxxx> Signed-off-by: Kirill Smelkov <kirr@xxxxxxxxxx> --- drivers/staging/easycap/README | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/staging/easycap/README b/drivers/staging/easycap/README index 16b8264..dadceb9 100644 --- a/drivers/staging/easycap/README +++ b/drivers/staging/easycap/README @@ -60,8 +60,8 @@ Three module parameters are defined: debug the easycap module is configured at diagnostic level n (0 to 9) gain audio gain level n (0 to 31, default is 16) -bars 0 => testcard bars when incoming video signal is lost - 1 => testcard bars when incoming video signal is lost (default) +bars whether to display testcard bars when incoming video signal is lost + 0 => no, 1 => yes (default) SUPPORTED TV STANDARDS AND RESOLUTIONS -- 1.7.6.rc1 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
