+olofj (chromium.org), sukeshs (Broadcom) On Mon, Jun 13, 2011 at 2:18 PM, Stephen Warren <swarren@xxxxxxxxxx> wrote: > I'm having resume problems on a system (NVIDIA Tegra Seaboard) that would > use the brcmfmac staging driver. Stephen, Are you using the chromium.org tree...and using 2.6.38 based kernel? Or directly using gregkh's staging-next:staging-2.6 tree/branch? > When the driver is loaded, suspend and resume (echo mem > /sys/state/power) > work fine. > > However, without the driver loaded, resume works, but 10 seconds later, > the kernel hangs a little, and spits out the errors quoted at the end of > this email. The hangs interfere with other devices on the system; e.g. > audio DMA gets starved and causes audible artifacts. > > I tracked this down to brcmfmac's suspend function wl_cfg80211_suspend() > calling sdioh_sdio_set_host_pm_flags(MMC_PM_KEEP_POWER). Broadcom and/or Olofj might have insight in this. It's not clear to me why loading the driver on resume would break this. Loading the driver at boot time works fine for me and should essentially be exercising the same code path from the driver PoV. > I note that the MMC controller suspend/resume path are influenced by > MMC_PM_KEEP_POWER, but only when the driver for the attached SDIO device > specify that flag, hence it's in host->pm_flags and not just in > host->pm_caps. Sorry, I don't know the difference and assume Olof does. > If I hack all the MMC core code to look for (host->pm_caps & > MMC_PM_KEEP_POWER) instead of (host->pm_flags & MMC_PM_KEEP_POWER), then > suspend/resume works fine even without the brcmfmac driver loaded. Olof (just walked by) suspects pm_caps means it's supported and pm_flags indicates state (enabled). > I imagine such a change isn't blanket appropriate for the MMC core. Can > anyone clue me in on: > > * Is the call to sdioh_sdio_set_host_pm_flags() just something that masks > a somewhat unrelated problem that should be investigated, or a direct fix > for this issue? Based on Olof's comments (and he wasn't 100% sure either), setting the pm_flags field sets the state. > * Is suspend/resume expected to work without the driver in a case like > this, or is it a known troublesome area? I think it should work without the driver loaded but I don't know where the dragons are in this subsystem (yet). > > Note that the call to sdioh_sdio_set_host_pm_flags() was introduced to > staging-2.6.git in commit 6b5a5a3eb77ea69382da9d2a64d74107e49cedaa > "STAGING: brcm80211 v2 keep power on in suspend state". > > Thanks! hth, grant > > The error spew: > > [ Â 45.739276] PM: resume of devices complete after 338.419 msecs > [ Â 46.642802] Restarting tasks ... done. > [ Â 56.697061] mmc2: Timeout waiting for hardware interrupt. > [ Â 56.742333] sdhci: =========== REGISTER DUMP (mmc2)=========== > [ Â 56.791248] sdhci: Sys addr: 0x00000000 | Version: Â0x00000001 > [ Â 56.840178] sdhci: Blk size: 0x00000000 | Blk cnt: Â0x00000000 > [ Â 56.840216] sdhci: Argument: 0x00010000 | Trn mode: 0x00000000 > [ Â 56.840253] sdhci: Present: Â0x1fff0001 | Host ctl: 0x00000001 > [ Â 56.840288] sdhci: Power: Â Â0x00000000 | Blk gap: Â0x00000000 > [ Â 56.840322] sdhci: Wake-up: Â0x00000000 | Clock: Â Â0x00000000 > [ Â 56.840356] sdhci: Timeout: Â0x00000000 | Int stat: 0x00000000 > [ Â 56.840391] sdhci: Int enab: 0x00ff00c3 | Sig enab: 0x00fc00c3 > [ Â 56.840425] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 > [ Â 56.840460] sdhci: Caps: Â Â 0x61ff30b0 | Caps_1: Â 0x00000000 > [ Â 56.840495] sdhci: Cmd: Â Â Â0x0000071a | Max curr: 0x00000001 > [ Â 56.840528] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000 > [ Â 56.840557] sdhci: =========================================== > [ Â 56.850714] mmc2: Controller never released inhibit bit(s). > [ Â 56.850751] sdhci: =========== REGISTER DUMP (mmc2)=========== > [ Â 56.850787] sdhci: Sys addr: 0x00000000 | Version: Â0x00000001 > [ Â 56.850822] sdhci: Blk size: 0x00000000 | Blk cnt: Â0x00000000 > [ Â 56.850858] sdhci: Argument: 0x00010000 | Trn mode: 0x00000000 > [ Â 56.850894] sdhci: Present: Â0x1fff0001 | Host ctl: 0x00000001 > [ Â 56.850928] sdhci: Power: Â Â0x00000000 | Blk gap: Â0x00000000 > [ Â 56.850961] sdhci: Wake-up: Â0x00000000 | Clock: Â Â0x00000000 > [ Â 56.850995] sdhci: Timeout: Â0x00000000 | Int stat: 0x00000000 > [ Â 56.851030] sdhci: Int enab: 0x00ff00c3 | Sig enab: 0x00fc00c3 > [ Â 56.851064] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 > [ Â 56.851099] sdhci: Caps: Â Â 0x61ff30b0 | Caps_1: Â 0x00000000 > [ Â 56.851134] sdhci: Cmd: Â Â Â0x0000071a | Max curr: 0x00000001 > [ Â 56.851167] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000 > [ Â 56.851196] sdhci: =========================================== > [ Â 56.861317] mmc2: Controller never released inhibit bit(s). > [ Â 56.861352] sdhci: =========== REGISTER DUMP (mmc2)=========== > [ Â 56.861387] sdhci: Sys addr: 0x00000000 | Version: Â0x00000001 > [ Â 56.861422] sdhci: Blk size: 0x00000000 | Blk cnt: Â0x00000000 > [ Â 56.861456] sdhci: Argument: 0x00010000 | Trn mode: 0x00000000 > [ Â 56.861491] sdhci: Present: Â0x1fff0001 | Host ctl: 0x00000001 > [ Â 56.861524] sdhci: Power: Â Â0x00000000 | Blk gap: Â0x00000000 > [ Â 56.861558] sdhci: Wake-up: Â0x00000000 | Clock: Â Â0x00000000 > [ Â 56.861591] sdhci: Timeout: Â0x00000000 | Int stat: 0x00000000 > [ Â 56.8n1626] sdhci: Int enab: 0x00ff00c3 | Sig enab: 0x00fc00c3 > [ Â 56.861659] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 > [ Â 56.861694] sdhci: Caps: Â Â 0x61ff30b0 | Caps_1: Â 0x00000000 > [ Â 56.861728] sdhci: Cmd: Â Â Â0x0000071a | Max curr: 0x00000001 > [ Â 56.861761] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000 > [ Â 56.861790] sdhci: =========================================== > [ Â 56.871906] mmc2: Controller never released inhibit bit(s). > [ Â 56.871940] sdhci: =========== REGISTER DUMP (mmc2)=========== > [ Â 56.871976] sdhci: Sys addr: 0x00000000 | Version: Â0x00000001 > [ Â 56.872010] sdhci: Blk size: 0x00000000 | Blk cnt: Â0x00000000 > [ Â 56.872045] sdhci: Argument: 0x00010000 | Trn mode: 0x00000000 > [ Â 56.872080] sdhci: Present: Â0x1fff0001 | Host ctl: 0x00000001 > [ Â 56.872112] sdhci: Power: Â Â0x00000000 | Blk gap: Â0x00000000 > [ Â 56.872146] sdhci: Wake-up: Â0x00000000 | Clock: Â Â0x00000000 > [ Â 56.872179] sdhci: Timeout: Â0x00000000 | Int stat: 0x00000000 > [ Â 56.872214] sdhci: Int enab: 0x00ff00c3 | Sig enab: 0x00fc00c3 > [ Â 56.872247] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 > [ Â 56.872282] sdhci: Caps: Â Â 0x61ff30b0 | Caps_1: Â 0x00000000 > [ Â 56.872315] sdhci: Cmd: Â Â Â0x0000071a | Max curr: 0x00000001 > [ Â 56.872348] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000 > [ Â 56.872377] sdhci: =========================================== > [ Â 56.876637] mmc2: card 0001 removed > > Then, the kernel appears to enumerate the card again, auto-loads the > driver (which doesn't happen at boot; I haven't fully investigated why), > and from that point on, IIRC, suspend/resume work OK: > > [ Â 59.679982] mmc2: queuing unknown CIS tuple 0x80 (50 bytes) > [ Â 59.687842] mmc2: queuing unknown CIS tuple 0x80 (7 bytes) > [ Â 59.690668] mmc2: queuing unknown CIS tuple 0x80 (7 bytes) > [ Â 59.697879] mmc2: queuing unknown CIS tuple 0x80 (19 bytes) > [ Â 59.716700] mmc2: queuing unknown CIS tuple 0x02 (1 bytes) > [ Â 59.719648] mmc2: new SDIO card at address 0001 > [ Â 60.012255] brcmutil: module is from the staging directory, the quality is unknown, you have been warned. > [ Â 60.012270] brcmutil: module is from the staging directory, the quality is unknown, you have been warned. > [ Â 60.029470] brcmutil: module is from the staging directory, the quality is unknown, you have been warned. > [ Â 60.383075] cfg80211: Calling CRDA to update world regulatory domain > [ Â 60.466156] brcmfmac: module is from the staging directory, the quality is unknown, you have been warned. > [ Â 60.469614] brcmfmac: module is from the staging directory, the quality is unknown, you have been warned. > [ Â 60.479732] brcmfmac: module is from the staging directory, the quality is unknown, you have been warned. > [ Â 60.709134] No SDIO Drive strength initdone for chip 4329 rev 3 pmurev 6 > [ Â 60.766006] DHD: dongle ram size is set to 294912(orig 294912) > [ Â 60.854818] ERROR @wl_cfg80211_request_fw : Could not download fw (-2) > [ Â 60.909985] _dhdsdio_download_firmware: dongle image file download failed > [ Â 61.137195] dhd_bus_start: dhdsdio_probe_download failed. firmware = brcm/bcm4329-fullmac-4.bin nvram = brcm/bcm4329-fullmac-4.txt > > -- > nvpublic > > _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
