The subject line says it all.
Signed-off-by: K. Y. Srinivasan <kys@xxxxxxxxxxxxx>
Signed-off-by: Haiyang Zhang <haiyangz@xxxxxxxxxxxxx>
Signed-off-by: Abhishek Kane <v-abkane@xxxxxxxxxxxxx>
Signed-off-by: Hank Janssen <hjanssen@xxxxxxxxxxxxx>
---
drivers/staging/hv/storvsc_drv.c | 65 +++----------------------------------
1 files changed, 6 insertions(+), 59 deletions(-)
diff --git a/drivers/staging/hv/storvsc_drv.c b/drivers/staging/hv/storvsc_drv.c
index 2f252ea..52d8974 100644
--- a/drivers/staging/hv/storvsc_drv.c
+++ b/drivers/staging/hv/storvsc_drv.c
@@ -79,13 +79,6 @@ static int stor_vsc_initialize(struct hv_driver *driver)
stor_driver = hvdr_to_stordr(driver);
- DPRINT_DBG(STORVSC,
- "sizeof(struct hv_storvsc_request)=%zd "
- "sizeof(struct vstor_packet)=%zd, "
- "sizeof(struct vmscsi_request)=%zd",
- sizeof(struct hv_storvsc_request),
- sizeof(struct vstor_packet),
- sizeof(struct vmscsi_request));
/* Make sure we are at least 2 pages since 1 page is used for control */
@@ -199,14 +192,8 @@ static int storvsc_drv_init(void)
storvsc_drv_obj->max_outstanding_req_per_channel);
if (storvsc_drv_obj->max_outstanding_req_per_channel <
- STORVSC_MAX_IO_REQUESTS) {
- DPRINT_ERR(STORVSC_DRV,
- "The number of outstanding io requests (%d) "
- "is larger than that supported (%d) internally.",
- STORVSC_MAX_IO_REQUESTS,
- storvsc_drv_obj->max_outstanding_req_per_channel);
+ STORVSC_MAX_IO_REQUESTS)
return -1;
- }
drv->driver.name = storvsc_drv_obj->base.name;
@@ -230,11 +217,8 @@ static int stor_vsc_on_host_reset(struct hv_device *device)
DPRINT_INFO(STORVSC, "resetting host adapter...");
stor_device = get_stor_device(device);
- if (!stor_device) {
- DPRINT_ERR(STORVSC, "unable to get stor device..."
- "device being destroyed?");
+ if (!stor_device)
return -1;
- }
request = &stor_device->reset_request;
vstor_packet = &request->vstor_packet;
@@ -250,11 +234,8 @@ static int stor_vsc_on_host_reset(struct hv_device *device)
(unsigned long)&stor_device->reset_request,
VM_PKT_DATA_INBAND,
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
- if (ret != 0) {
- DPRINT_ERR(STORVSC, "Unable to send reset packet %p ret %d",
- vstor_packet, ret);
+ if (ret != 0)
goto cleanup;
- }
t = wait_for_completion_timeout(&request->wait_event, HZ);
if (t == 0) {
@@ -296,9 +277,6 @@ static void storvsc_drv_exit(void)
(void *) ¤t_dev,
storvsc_drv_exit_cb);
- if (ret)
- DPRINT_WARN(STORVSC_DRV,
- "driver_for_each_device returned %d", ret);
if (current_dev == NULL)
break;
@@ -331,10 +309,8 @@ static int storvsc_probe(struct hv_device *device)
host = scsi_host_alloc(&scsi_driver,
sizeof(struct hv_host_device));
- if (!host) {
- DPRINT_ERR(STORVSC_DRV, "unable to allocate scsi host object");
+ if (!host)
return -ENOMEM;
- }
dev_set_drvdata(&device->device, host);
@@ -359,7 +335,6 @@ static int storvsc_probe(struct hv_device *device)
ret = storvsc_drv_obj->base.dev_add(device, (void *)&device_info);
if (ret != 0) {
- DPRINT_ERR(STORVSC_DRV, "unable to add scsi vsc device");
kmem_cache_destroy(host_dev->request_pool);
scsi_host_put(host);
return -1;
@@ -378,7 +353,6 @@ static int storvsc_probe(struct hv_device *device)
/* Register the HBA and start the scsi bus scan */
ret = scsi_add_host(host, &device->device);
if (ret != 0) {
- DPRINT_ERR(STORVSC_DRV, "unable to add scsi host device");
storvsc_drv_obj->base.dev_rm(device);
@@ -692,11 +666,6 @@ static int storvsc_queuecommand_lck(struct scsi_cmnd *scmnd,
unsigned int sg_count = 0;
struct vmscsi_request *vm_srb;
- DPRINT_DBG(STORVSC_DRV, "scmnd %p dir %d, use_sg %d buf %p len %d "
- "queue depth %d tagged %d", scmnd, scmnd->sc_data_direction,
- scsi_sg_count(scmnd), scsi_sglist(scmnd),
- scsi_bufflen(scmnd), scmnd->device->queue_depth,
- scmnd->device->tagged_supported);
/* If retrying, no need to prep the cmd */
if (scmnd->host_scribble) {
@@ -720,8 +689,6 @@ static int storvsc_queuecommand_lck(struct scsi_cmnd *scmnd,
cmd_request = kmem_cache_zalloc(host_dev->request_pool,
GFP_ATOMIC);
if (!cmd_request) {
- DPRINT_ERR(STORVSC_DRV, "scmnd (%p) - unable to allocate "
- "storvsc_cmd_request...marking queue busy", scmnd);
scmnd->scsi_done = NULL;
return SCSI_MLQUEUE_DEVICE_BUSY;
}
@@ -736,7 +703,6 @@ static int storvsc_queuecommand_lck(struct scsi_cmnd *scmnd,
request = &cmd_request->request;
vm_srb = &request->vstor_packet.vm_srb;
- DPRINT_DBG(STORVSC_DRV, "req %p size %d", request, request_size);
/* Build the SRB */
switch (scmnd->sc_data_direction) {
@@ -775,17 +741,10 @@ static int storvsc_queuecommand_lck(struct scsi_cmnd *scmnd,
/* check if we need to bounce the sgl */
if (do_bounce_buffer(sgl, scsi_sg_count(scmnd)) != -1) {
- DPRINT_INFO(STORVSC_DRV,
- "need to bounce buffer for this scmnd %p",
- scmnd);
cmd_request->bounce_sgl =
create_bounce_buffer(sgl, scsi_sg_count(scmnd),
scsi_bufflen(scmnd));
if (!cmd_request->bounce_sgl) {
- DPRINT_ERR(STORVSC_DRV,
- "unable to create bounce buffer for "
- "this scmnd %p", scmnd);
-
scmnd->scsi_done = NULL;
scmnd->host_scribble = NULL;
kmem_cache_free(host_dev->request_pool,
@@ -811,12 +770,10 @@ static int storvsc_queuecommand_lck(struct scsi_cmnd *scmnd,
request->data_buffer.offset = sgl[0].offset;
- for (i = 0; i < sg_count; i++) {
- DPRINT_DBG(STORVSC_DRV, "sgl[%d] len %d offset %d\n",
- i, sgl[i].length, sgl[i].offset);
+ for (i = 0; i < sg_count; i++)
request->data_buffer.pfn_array[i] =
page_to_pfn(sg_page((&sgl[i])));
- }
+
} else if (scsi_sglist(scmnd)) {
/* ASSERT(scsi_bufflen(scmnd) <= PAGE_SIZE); */
request->data_buffer.offset =
@@ -831,9 +788,6 @@ retry_request:
&cmd_request->request);
if (ret == -1) {
/* no more space */
- DPRINT_ERR(STORVSC_DRV,
- "scmnd (%p) - queue FULL...marking queue busy",
- scmnd);
if (cmd_request->bounce_sgl_count) {
/*
@@ -872,8 +826,6 @@ static int storvsc_merge_bvec(struct request_queue *q,
*/
static int storvsc_device_alloc(struct scsi_device *sdevice)
{
- DPRINT_DBG(STORVSC_DRV, "sdev (%p) - setting device flag to %d",
- sdevice, BLIST_SPARSELUN);
/*
* This enables luns to be located sparsely. Otherwise, we may not
* discovered them.
@@ -884,11 +836,6 @@ static int storvsc_device_alloc(struct scsi_device *sdevice)
static int storvsc_device_configure(struct scsi_device *sdevice)
{
- DPRINT_INFO(STORVSC_DRV, "sdev (%p) - curr queue depth %d", sdevice,
- sdevice->queue_depth);
-
- DPRINT_INFO(STORVSC_DRV, "sdev (%p) - setting queue depth to %d",
- sdevice, STORVSC_MAX_IO_REQUESTS);
scsi_adjust_queue_depth(sdevice, MSG_SIMPLE_TAG,
STORVSC_MAX_IO_REQUESTS);
--
1.7.4.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
