On Tue, May 10, 2011 at 10:10:23AM +0530, Kalle Valo wrote:
> From: Naveen Singh <nsingh@xxxxxxxxxxx>
>
> implementing the cfg ops that gets called when iw dev wlan0
> link is issued by user. The ops that needs to be implemented
> is get_station.
>
> kvalo: check the mac address and fix style issues
>
> Signed-off-by: Naveen Singh <nsingh@xxxxxxxxxxx>
> Signed-off-by: Kalle Valo <kalle.valo@xxxxxxxxxxx>
> ---
> drivers/staging/ath6kl/os/linux/cfg80211.c | 130 ++++++++++++++++++++++++++++
> 1 files changed, 130 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/staging/ath6kl/os/linux/cfg80211.c b/drivers/staging/ath6kl/os/linux/cfg80211.c
> index efd4ae5..cb3187e 100644
> --- a/drivers/staging/ath6kl/os/linux/cfg80211.c
> +++ b/drivers/staging/ath6kl/os/linux/cfg80211.c
> @@ -1460,6 +1460,135 @@ u32 cipher_suites[] = {
> WLAN_CIPHER_SUITE_CCMP,
> };
>
> +bool is_rate_legacy(s32 rate)
> +{
> + static const s32 legacy[] = { 1000, 2000, 5500, 11000,
> + 6000, 9000, 12000, 18000, 24000,
> + 36000, 48000, 54000 };
> + u8 i;
> +
> + for (i = 0; i < 12; i++) {
> + if (rate == legacy[i])
> + return true;
> + }
> +
> + return false;
> +}
[...]
> +
> +bool is_rate_ht20(s32 rate, u8 *mcs)
> +{
> + static const s32 ht20[] = { 6500, 13000, 19500, 26000, 39000,
> + 52000, 58500, 65000, 72200 };
> + u8 i;
> +
> + for (i = 0; i < 9; i++) {
> + if (rate == ht20[i]) {
> + *mcs = i;
> + return true;
> + }
> + }
> + return false;
> +}
> +
> +bool is_rate_ht40(s32 rate, u8 *mcs)
> +{
> + static const s32 ht40[] = { 13500, 27000, 40500, 54000,
> + 81000, 108000, 121500, 135000 };
> + u8 i;
> +
> + for (i = 0; i < 9; i++) {
> + if (rate == ht40[i]) {
> + *mcs = i;
> + return true;
> + }
> + }
> +
> + return false;
> +}
[...]
> +
> +int ar6k_get_station(struct wiphy *wiphy, struct net_device *dev,
> + u8 *mac, struct station_info *sinfo)
> +{
> + struct ar6_softc *ar = ar6k_priv(dev);
> + u8 mcs, ret, timeout = false;
> +
> + if (compare_ether_addr(mac, ar->arBssid))
this may result in unaligned memeory access on some platforms as mac
may not be 2 byte aligned. This is the case with the caller as per
cfg80211_wext_giwrate() and cfg80211_wireless_stats().
> + return -ENOENT;
> +
> + if (down_interruptible(&ar->arSem))
> + return -EBUSY;
> +
> + ar->statsUpdatePending = true;
> +
> + ret = wmi_get_stats_cmd(ar->arWmi);
> +
> + if (ret != 0) {
> + up(&ar->arSem);
> + return -EIO;
> + }
> +
> + wait_event_interruptible_timeout(arEvent,
> + ar->statsUpdatePending == false,
> + wmitimeout * HZ);
> +
> + if (signal_pending(current)) {
wait_event_interruptible_tiemout() itself checks for signal_pending and so this is
not necessary. You can check for the return status of
wait_event_interruptible_timeout() to know whether the task was interrupted by a
signal.
> + timeout = true;
> + AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
> + ("ar6000 : WMI get stats timeout\n"));
> + }
> +
> + up(&ar->arSem);
I believe we can release the semaphore early on. I don't see any reason..
> +
> + if (timeout)
Not required as mentioned earlier.. You can check the return value..
> + return -ETIMEDOUT;
> +
> + if (ar->arTargetStats.rx_bytes) {
> + sinfo->rx_bytes = ar->arTargetStats.rx_bytes;
> + sinfo->filled |= STATION_INFO_RX_BYTES;
> + sinfo->rx_packets = ar->arTargetStats.rx_packets;
> + sinfo->filled |= STATION_INFO_RX_PACKETS;
> + }
> +
> + if (ar->arTargetStats.tx_bytes) {
> + sinfo->tx_bytes = ar->arTargetStats.tx_bytes;
> + sinfo->filled |= STATION_INFO_TX_BYTES;
> + sinfo->tx_packets = ar->arTargetStats.tx_packets;
> + sinfo->filled |= STATION_INFO_TX_PACKETS;
> + }
> +
> + sinfo->signal = ar->arTargetStats.cs_rssi;
> + sinfo->filled |= STATION_INFO_SIGNAL;
> +
> + if (is_rate_legacy(ar->arTargetStats.tx_unicast_rate)) {
> + sinfo->txrate.legacy = ar->arTargetStats.tx_unicast_rate / 100;
> + } else if (is_rate_ht20(ar->arTargetStats.tx_unicast_rate, &mcs)) {
> + if (mcs == 0x08) {
> + sinfo->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI;
> + sinfo->txrate.mcs = mcs - 1;
> + } else {
> + sinfo->txrate.mcs = mcs;
> + }
> +
> + sinfo->txrate.flags |= RATE_INFO_FLAGS_MCS;
> + } else if (is_rate_ht40(ar->arTargetStats.tx_unicast_rate, &mcs)) {
> + if (mcs == 0x08) {
> + sinfo->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI;
> + sinfo->txrate.mcs = mcs - 1;
> + } else {
> + sinfo->txrate.mcs = mcs;
> + }
> +
> + sinfo->txrate.flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH;
> + sinfo->txrate.flags |= RATE_INFO_FLAGS_MCS;
> + } else {
> + WARN(1, "invalid rate: %d", ar->arTargetStats.tx_unicast_rate);
> + }
> +
> + sinfo->filled |= STATION_INFO_TX_BITRATE;
> +
> + return 0;
> +}
> +
> static struct
> cfg80211_ops ar6k_cfg80211_ops = {
> .change_virtual_intf = ar6k_cfg80211_change_iface,
> @@ -1480,6 +1609,7 @@ cfg80211_ops ar6k_cfg80211_ops = {
> .set_power_mgmt = ar6k_cfg80211_set_power_mgmt,
> .join_ibss = ar6k_cfg80211_join_ibss,
> .leave_ibss = ar6k_cfg80211_leave_ibss,
> + .get_station = ar6k_get_station,
> };
>
> struct wireless_dev *
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
