This is not defined anywhere, also delete vmc_reg.h which is
used only in the dead code.
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@xxxxxxxxxxx>
---
.../include/common/AR6002/hw2.0/hw/vmc_reg.h | 36 ---------
drivers/staging/ath6kl/miscdrv/common_drv.c | 80 --------------------
2 files changed, 0 insertions(+), 116 deletions(-)
delete mode 100644 drivers/staging/ath6kl/include/common/AR6002/hw2.0/hw/vmc_reg.h
diff --git a/drivers/staging/ath6kl/include/common/AR6002/hw2.0/hw/vmc_reg.h b/drivers/staging/ath6kl/include/common/AR6002/hw2.0/hw/vmc_reg.h
deleted file mode 100644
index c24c710..0000000
--- a/drivers/staging/ath6kl/include/common/AR6002/hw2.0/hw/vmc_reg.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef _VMC_REG_REG_H_
-#define _VMC_REG_REG_H_
-
-#define MC_TCAM_VALID_ADDRESS 0x00000000
-#define MC_TCAM_VALID_OFFSET 0x00000000
-#define MC_TCAM_VALID_BIT_MSB 0
-#define MC_TCAM_VALID_BIT_LSB 0
-#define MC_TCAM_VALID_BIT_MASK 0x00000001
-#define MC_TCAM_VALID_BIT_GET(x) (((x) & MC_TCAM_VALID_BIT_MASK) >> MC_TCAM_VALID_BIT_LSB)
-#define MC_TCAM_VALID_BIT_SET(x) (((x) << MC_TCAM_VALID_BIT_LSB) & MC_TCAM_VALID_BIT_MASK)
-
-#define MC_TCAM_MASK_ADDRESS 0x00000080
-#define MC_TCAM_MASK_OFFSET 0x00000080
-#define MC_TCAM_MASK_SIZE_MSB 2
-#define MC_TCAM_MASK_SIZE_LSB 0
-#define MC_TCAM_MASK_SIZE_MASK 0x00000007
-#define MC_TCAM_MASK_SIZE_GET(x) (((x) & MC_TCAM_MASK_SIZE_MASK) >> MC_TCAM_MASK_SIZE_LSB)
-#define MC_TCAM_MASK_SIZE_SET(x) (((x) << MC_TCAM_MASK_SIZE_LSB) & MC_TCAM_MASK_SIZE_MASK)
-
-#define MC_TCAM_COMPARE_ADDRESS 0x00000100
-#define MC_TCAM_COMPARE_OFFSET 0x00000100
-#define MC_TCAM_COMPARE_KEY_MSB 21
-#define MC_TCAM_COMPARE_KEY_LSB 5
-#define MC_TCAM_COMPARE_KEY_MASK 0x003fffe0
-#define MC_TCAM_COMPARE_KEY_GET(x) (((x) & MC_TCAM_COMPARE_KEY_MASK) >> MC_TCAM_COMPARE_KEY_LSB)
-#define MC_TCAM_COMPARE_KEY_SET(x) (((x) << MC_TCAM_COMPARE_KEY_LSB) & MC_TCAM_COMPARE_KEY_MASK)
-
-#define MC_TCAM_TARGET_ADDRESS 0x00000180
-#define MC_TCAM_TARGET_OFFSET 0x00000180
-#define MC_TCAM_TARGET_ADDR_MSB 21
-#define MC_TCAM_TARGET_ADDR_LSB 5
-#define MC_TCAM_TARGET_ADDR_MASK 0x003fffe0
-#define MC_TCAM_TARGET_ADDR_GET(x) (((x) & MC_TCAM_TARGET_ADDR_MASK) >> MC_TCAM_TARGET_ADDR_LSB)
-#define MC_TCAM_TARGET_ADDR_SET(x) (((x) << MC_TCAM_TARGET_ADDR_LSB) & MC_TCAM_TARGET_ADDR_MASK)
-
-#endif /* _VMC_REG_H_ */
diff --git a/drivers/staging/ath6kl/miscdrv/common_drv.c b/drivers/staging/ath6kl/miscdrv/common_drv.c
index 43b8693..abd1e9c 100644
--- a/drivers/staging/ath6kl/miscdrv/common_drv.c
+++ b/drivers/staging/ath6kl/miscdrv/common_drv.c
@@ -27,7 +27,6 @@
#include "hw/mbox_host_reg.h"
#include "hw/si_reg.h"
#include "AR6002/hw2.0/hw/gpio_reg.h"
-#include "AR6002/hw2.0/hw/vmc_reg.h"
#include "hw/rtc_reg.h"
#include "hw/mbox_reg.h"
#include "hw/apb_map.h"
@@ -682,85 +681,6 @@ int ar6000_set_htc_params(struct hif_device *hifDevice,
return status;
}
-#if defined(CONFIG_AR6002_REV1_FORCE_HOST)
-/*
- * Call this function just before the call to BMIInit
- * in order to force* AR6002 rev 1.x firmware to detect a Host.
- * THIS IS FOR USE ONLY WITH AR6002 REV 1.x.
- * TBDXXX: Remove this function when REV 1.x is desupported.
- */
-int
-ar6002_REV1_reset_force_host (struct hif_device *hifDevice)
-{
- s32 i;
- struct forceROM_s {
- u32 addr;
- u32 data;
- };
- struct forceROM_s *ForceROM;
- s32 szForceROM;
- int status = 0;
- u32 address;
- u32 data;
-
- /* Force AR6002 REV1.x to recognize Host presence.
- *
- * Note: Use RAM at 0x52df80..0x52dfa0 with ROM Remap entry 0
- * so that this workaround functions with AR6002.war1.sh. We
- * could fold that entire workaround into this one, but it's not
- * worth the effort at this point. This workaround cannot be
- * merged into the other workaround because this must be done
- * before BMI.
- */
-
- static struct forceROM_s ForceROM_NEW[] = {
- {0x52df80, 0x20f31c07},
- {0x52df84, 0x92374420},
- {0x52df88, 0x1d120c03},
- {0x52df8c, 0xff8216f0},
- {0x52df90, 0xf01d120c},
- {0x52df94, 0x81004136},
- {0x52df98, 0xbc9100bd},
- {0x52df9c, 0x00bba100},
-
- {0x00008000|MC_TCAM_TARGET_ADDRESS, 0x0012dfe0}, /* Use remap entry 0 */
- {0x00008000|MC_TCAM_COMPARE_ADDRESS, 0x000e2380},
- {0x00008000|MC_TCAM_MASK_ADDRESS, 0x00000000},
- {0x00008000|MC_TCAM_VALID_ADDRESS, 0x00000001},
-
- {0x00018000|(LOCAL_COUNT_ADDRESS+0x10), 0}, /* clear BMI credit counter */
-
- {0x00004000|AR6002_RESET_CONTROL_ADDRESS, RESET_CONTROL_WARM_RST_MASK},
- };
-
- address = 0x004ed4b0; /* REV1 target software ID is stored here */
- status = ar6000_ReadRegDiag(hifDevice, &address, &data);
- if (status || (data != AR6002_VERSION_REV1)) {
- return A_ERROR; /* Not AR6002 REV1 */
- }
-
- ForceROM = ForceROM_NEW;
- szForceROM = sizeof(ForceROM_NEW)/sizeof(*ForceROM);
-
- ATH_DEBUG_PRINTF (DBG_MISC_DRV, ATH_DEBUG_TRC, ("Force Target to recognize Host....\n"));
- for (i = 0; i < szForceROM; i++)
- {
- if (ar6000_WriteRegDiag(hifDevice,
- &ForceROM[i].addr,
- &ForceROM[i].data) != 0)
- {
- ATH_DEBUG_PRINTF (DBG_MISC_DRV, ATH_DEBUG_TRC, ("Cannot force Target to recognize Host!\n"));
- return A_ERROR;
- }
- }
-
- A_MDELAY(1000);
-
- return 0;
-}
-
-#endif /* CONFIG_AR6002_REV1_FORCE_HOST */
-
void DebugDumpBytes(u8 *buffer, u16 length, char *pDescription)
{
char stream[60];
--
1.7.0.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
