Re: [PATCH v9 03/13] media: hantro: Use syscon instead of 'ctrl' register

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Lucas,

On Mon, 2021-05-17 at 12:52 +0200, Lucas Stach wrote:
> Hi Ezequiel,
> 
> Am Sonntag, dem 16.05.2021 um 19:40 -0300 schrieb Ezequiel Garcia:
> > Hi Lucas,
> > 
> > On Fri, 2021-04-16 at 12:54 +0200, Lucas Stach wrote:
> > > Am Mittwoch, dem 07.04.2021 um 09:35 +0200 schrieb Benjamin Gaignard:
> > > > In order to be able to share the control hardware block between
> > > > VPUs use a syscon instead a ioremap it in the driver.
> > > > To keep the compatibility with older DT if 'nxp,imx8mq-vpu-ctrl'
> > > > phandle is not found look at 'ctrl' reg-name.
> > > > With the method it becomes useless to provide a list of register
> > > > names so remove it.
> > > 
> > > Sorry for putting a spoke in the wheel after many iterations of the
> > > series.
> > > 
> > > We just discussed a way forward on how to handle the clocks and resets
> > > provided by the blkctl block on i.MX8MM and later and it seems there is
> > > a consensus on trying to provide virtual power domains from a blkctl
> > > driver, controlling clocks and resets for the devices in the power
> > > domain. I would like to avoid introducing yet another way of handling
> > > the blkctl and thus would like to align the i.MX8MQ VPU blkctl with
> > > what we are planning to do on the later chip generations.
> > > 
> > > CC'ing Jacky Bai and Peng Fan from NXP, as they were going to give this
> > > virtual power domain thing a shot.
> > > 
> > 
> > It seems the i.MX8MM BLK-CTL series are moving forward:
> > 
> > https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=479175
> > 
> > ... but I'm unable to wrap my head around how this affects the
> > devicetree VPU modelling for i.MX8MQ (and also i.MX8MM, i.MX8MP, ...).
> > 
> > 
> For the i.MX8MQ we want to have the same virtual power-domains provided
> by a BLK-CTRL driver for the VPUs, as on i.MX8MM. This way we should be
> able to use the same DT bindings for the VPUs on i.MX8MQ and i.MX8MM,
> even though the SoC integration with the blk-ctrl is a little
> different.
> 
> > Can you clarify that?
> > 
> I'm planning on sending some patches adding i.MX8MQ VPU support to the
> BLK-CTRL driver in the next few days. I guess that should clarify
> things. :)
> 

As a gentle reminder, Hans sent the i.MX8MQ G2 HEVC support pull request
and Benjamin just posted a series adding support for more features.

Do you think we could have the blk-ctrl support landing in v5.14?

If you work on the patches, and you happen to test the G1 and G2 on
i.MX8MM it would be great to add that too.

Meanwhile, our next steps would be to improve the HEVC V4L2 uAPI itself.

Thanks a lot!
Ezequiel 

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux