[PATCH 15/17] staging: nuc-wmi: add support for changing the ethernet type indicator

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The Ethernet type indicator can be configured to show the status
of LAN1, LAN1 or both. Add support for it.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
---
 drivers/staging/nuc-led/nuc-wmi.c | 89 +++++++++++++++++++++++++++++++
 1 file changed, 89 insertions(+)

diff --git a/drivers/staging/nuc-led/nuc-wmi.c b/drivers/staging/nuc-led/nuc-wmi.c
index fab0094a20e4..9e8164cd77ec 100644
--- a/drivers/staging/nuc-led/nuc-wmi.c
+++ b/drivers/staging/nuc-led/nuc-wmi.c
@@ -1695,12 +1695,100 @@ static ssize_t store_hdd_default(struct device *dev,
 	return len;
 }
 
+/* Ethernet type  */
+static const char * const ethernet_type[] = {
+	"LAN1",
+	"LAN2",
+	"LAN1+LAN2"
+};
+
+static ssize_t show_ethernet_type(struct device *dev,
+				   struct device_attribute *attr,
+				   char *buf)
+{
+	struct led_classdev *cdev = dev_get_drvdata(dev);
+	struct nuc_nmi_led *led = container_of(cdev, struct nuc_nmi_led, cdev);
+	u8 input[NUM_INPUT_ARGS] = { 0 };
+	u8 output[NUM_OUTPUT_ARGS];
+	int ctrl, ret, val, i, n;
+	int size = PAGE_SIZE;
+	char *p = buf;
+
+	if (led->indicator != LED_IND_ETHERNET)
+		return -EINVAL;
+
+	ctrl = led->reg_table[led->indicator][LED_FUNC_ETH_TYPE];
+
+	if (!nuc_wmi_test_control(dev, led, ctrl))
+		return -ENODEV;
+
+	input[0] = LED_NEW_GET_CONTROL_ITEM;
+	input[1] = led->id;
+	input[2] = led->indicator;
+	input[3] = ctrl;
+
+	ret = nuc_nmi_cmd(dev, LED_NEW_GET_STATUS, input, output);
+	if (ret)
+		return ret;
+
+	val = output[0];
+
+	for (i = 0; i < ARRAY_SIZE(ethernet_type); i++) {
+		if (i == val)
+			n = scnprintf(p, size, "[%s]  ", ethernet_type[i]);
+		else
+			n = scnprintf(p, size, "%s  ", ethernet_type[i]);
+		p += n;
+		size -= n;
+	}
+	size -= scnprintf(p, size, "\n");
+
+	return PAGE_SIZE - size;
+}
+
+static ssize_t store_ethernet_type(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t len)
+{
+	struct led_classdev *cdev = dev_get_drvdata(dev);
+	struct nuc_nmi_led *led = container_of(cdev, struct nuc_nmi_led, cdev);
+	u8 input[NUM_INPUT_ARGS] = { 0 };
+	int ctrl, val, ret;
+	const char *tmp;
+
+	if (led->indicator != LED_IND_ETHERNET)
+		return -EINVAL;
+
+	ctrl = led->reg_table[led->indicator][LED_FUNC_ETH_TYPE];
+
+	if (!nuc_wmi_test_control(dev, led, ctrl))
+		return -ENODEV;
+
+	for (val = 0; val < ARRAY_SIZE(ethernet_type); val++)
+		if (!strcasecmp(tmp, ethernet_type[val]))
+			break;
+
+	if (val >= ARRAY_SIZE(ethernet_type))
+		return -EINVAL;
+
+	input[0] = led->id;
+	input[1] = led->indicator;
+	input[2] = ctrl;
+	input[3] = val;
+
+	ret = nuc_nmi_cmd(dev, LED_SET_VALUE, input, NULL);
+	if (ret)
+		return ret;
+
+	return len;
+}
 
 static LED_ATTR_RW(indicator);
 static LED_ATTR_RW(color);
 static LED_ATTR_RW(blink_behavior);
 static LED_ATTR_RW(blink_frequency);
 static LED_ATTR_RW(hdd_default);
+static LED_ATTR_RW(ethernet_type);
 
 LED_ATTR_POWER_STATE_RW(s0_brightness, brightness, 0);
 LED_ATTR_POWER_STATE_RW(s0_blink_behavior, blink_behavior, 0);
@@ -1729,6 +1817,7 @@ LED_ATTR_POWER_STATE_RW(standby_blink_frequency, blink_frequency, 2);
 static struct attribute *nuc_wmi_led_attr[] = {
 	&dev_attr_indicator.attr,
 	&dev_attr_hdd_default.attr,
+	&dev_attr_ethernet_type.attr,
 	NULL,
 };
 
-- 
2.31.1

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux