Quoting Sergio Paracuellos (2021-04-09 22:50:56) > The documentation for this SOC only talks about two > registers regarding to the clocks: > * SYSC_REG_CPLL_CLKCFG0 - provides some information about > boostrapped refclock. PLL and dividers used for CPU and some > sort of BUS. > * SYSC_REG_CPLL_CLKCFG1 - a banch of gates to enable/disable > clocks for all or some ip cores. > > Looking into driver code, and some openWRT patched there are > another frequencies which are used in some drivers (uart, sd...). > According to all of this information the clock plan for this > SoC is set as follows: > - Main top clock "xtal" from where all the rest of the world is > derived. > - CPU clock "cpu" derived from "xtal" frequencies and a bunch of > register reads and predividers. > - BUS clock "bus" derived from "cpu" and with (cpu / 4) MHz. > - Fixed clocks from "xtal": > * "50m": 50 MHz. > * "125m": 125 MHz. > * "150m": 150 MHz. > * "250m": 250 MHz. > * "270m": 270 MHz. > > We also have a buch of gate clocks with their parents: > * "hsdma": "150m" > * "fe": "250m" > * "sp_divtx": "270m" > * "timer": "50m" > * "pcm": "270m" > * "pio": "50m" > * "gdma": "bus" > * "nand": "125m" > * "i2c": "50m" > * "i2s": "270m" > * "spi": "bus" > * "uart1": "50m" > * "uart2": "50m" > * "uart3": "50m" > * "eth": "50m" > * "pcie0": "125m" > * "pcie1": "125m" > * "pcie2": "125m" > * "crypto": "250m" > * "shxc": "50m" > > With this information the clk driver will provide clock and gates > functionality from a a set of hardcoded clocks allowing to define > a nice device tree without fixed clocks. > > Signed-off-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx> > --- Applied to clk-next _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
