This change converts the driver to use device-managed functions in the
probe function. For the clock and regulator disable, some
devm_add_action_or_reset() calls are required, and then
devm_iio_device_register() function can be used register the IIO device.
The final aim here would be for IIO to export only the device-managed
functions of it's API. That's a long way to go and this a small step in
that direction.
Signed-off-by: Alexandru Ardelean <aardelean@xxxxxxxxxxx>
---
drivers/staging/iio/frequency/ad9834.c | 64 +++++++++++++-------------
1 file changed, 31 insertions(+), 33 deletions(-)
diff --git a/drivers/staging/iio/frequency/ad9834.c b/drivers/staging/iio/frequency/ad9834.c
index 262c3590e64e..b063cfd0e0e1 100644
--- a/drivers/staging/iio/frequency/ad9834.c
+++ b/drivers/staging/iio/frequency/ad9834.c
@@ -390,6 +390,20 @@ static const struct iio_info ad9833_info = {
.attrs = &ad9833_attribute_group,
};
+static void ad9834_disable_reg(void *data)
+{
+ struct regulator *reg = data;
+
+ regulator_disable(reg);
+}
+
+static void ad9834_disable_clk(void *data)
+{
+ struct clk *clk = data;
+
+ clk_disable_unprepare(clk);
+}
+
static int ad9834_probe(struct spi_device *spi)
{
struct ad9834_state *st;
@@ -407,26 +421,33 @@ static int ad9834_probe(struct spi_device *spi)
return ret;
}
+ ret = devm_add_action_or_reset(&spi->dev, ad9834_disable_reg, reg);
+ if (ret)
+ return ret;
+
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
if (!indio_dev) {
ret = -ENOMEM;
- goto error_disable_reg;
+ return ret;
}
- spi_set_drvdata(spi, indio_dev);
st = iio_priv(indio_dev);
mutex_init(&st->lock);
st->mclk = devm_clk_get(&spi->dev, NULL);
if (IS_ERR(st->mclk)) {
ret = PTR_ERR(st->mclk);
- goto error_disable_reg;
+ return ret;
}
ret = clk_prepare_enable(st->mclk);
if (ret) {
dev_err(&spi->dev, "Failed to enable master clock\n");
- goto error_disable_reg;
+ return ret;
}
+ ret = devm_add_action_or_reset(&spi->dev, ad9834_disable_clk, st->mclk);
+ if (ret)
+ return ret;
+
st->spi = spi;
st->devid = spi_get_device_id(spi)->driver_data;
st->reg = reg;
@@ -470,48 +491,26 @@ static int ad9834_probe(struct spi_device *spi)
ret = spi_sync(st->spi, &st->msg);
if (ret) {
dev_err(&spi->dev, "device init failed\n");
- goto error_clock_unprepare;
+ return ret;
}
ret = ad9834_write_frequency(st, AD9834_REG_FREQ0, 1000000);
if (ret)
- goto error_clock_unprepare;
+ return ret;
ret = ad9834_write_frequency(st, AD9834_REG_FREQ1, 5000000);
if (ret)
- goto error_clock_unprepare;
+ return ret;
ret = ad9834_write_phase(st, AD9834_REG_PHASE0, 512);
if (ret)
- goto error_clock_unprepare;
+ return ret;
ret = ad9834_write_phase(st, AD9834_REG_PHASE1, 1024);
if (ret)
- goto error_clock_unprepare;
-
- ret = iio_device_register(indio_dev);
- if (ret)
- goto error_clock_unprepare;
-
- return 0;
-error_clock_unprepare:
- clk_disable_unprepare(st->mclk);
-error_disable_reg:
- regulator_disable(reg);
-
- return ret;
-}
-
-static int ad9834_remove(struct spi_device *spi)
-{
- struct iio_dev *indio_dev = spi_get_drvdata(spi);
- struct ad9834_state *st = iio_priv(indio_dev);
-
- iio_device_unregister(indio_dev);
- clk_disable_unprepare(st->mclk);
- regulator_disable(st->reg);
+ return ret;
- return 0;
+ return devm_iio_device_register(&spi->dev, indio_dev);
}
static const struct spi_device_id ad9834_id[] = {
@@ -539,7 +538,6 @@ static struct spi_driver ad9834_driver = {
.of_match_table = ad9834_of_match
},
.probe = ad9834_probe,
- .remove = ad9834_remove,
.id_table = ad9834_id,
};
module_spi_driver(ad9834_driver);
--
2.29.2
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
