Signed-off-by: Roland Vossen <rvossen@xxxxxxxxxxxx>
Reviewed-by: Arend van Spriel <arend@xxxxxxxxxxxx>
---
drivers/staging/brcm80211/brcmsmac/wl_dbg.h | 3 -
drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c | 50 +++++++++--------------
2 files changed, 20 insertions(+), 33 deletions(-)
diff --git a/drivers/staging/brcm80211/brcmsmac/wl_dbg.h b/drivers/staging/brcm80211/brcmsmac/wl_dbg.h
index 5e58f5e..d95f8a9 100644
--- a/drivers/staging/brcm80211/brcmsmac/wl_dbg.h
+++ b/drivers/staging/brcm80211/brcmsmac/wl_dbg.h
@@ -36,7 +36,6 @@ do { \
#ifdef BCMDBG
-#define WL_AMPDU(fmt, args...) WL_PRINT(WL_AMPDU_VAL, fmt, ##args)
#define WL_FFPLD(fmt, args...) WL_PRINT(WL_FFPLD_VAL, fmt, ##args)
/* Extra message control for AMPDU debugging */
@@ -80,8 +79,6 @@ do { \
#else /* BCMDBG */
-#define WL_TRACE(fmt, args...) no_printk(fmt, ##args)
-#define WL_AMPDU(fmt, args...) no_printk(fmt, ##args)
#define WL_FFPLD(fmt, args...) no_printk(fmt, ##args)
#define WL_AMPDU_UPDN(fmt, args...) no_printk(fmt, ##args)
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c b/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c
index 1b92767..d306bf7 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c
@@ -76,16 +76,6 @@
AMPDU_DELIMITER_LEN + 3\
+ DOT11_A4_HDR_LEN + DOT11_QOS_LEN + DOT11_IV_MAX_LEN)
-#ifdef BCMDBG
-u32 wl_ampdu_dbg =
- WL_AMPDU_UPDN_VAL |
- WL_AMPDU_ERR_VAL |
- WL_AMPDU_TX_VAL |
- WL_AMPDU_RX_VAL |
- WL_AMPDU_CTL_VAL |
- WL_AMPDU_HW_VAL | WL_AMPDU_HWTXS_VAL | WL_AMPDU_HWDBG_VAL;
-#endif
-
/* structure to hold tx fifo information and pre-loading state
* counters specific to tx underflows of ampdus
* some counters might be redundant with the ones in wlc or ampdu structures.
@@ -235,7 +225,7 @@ void scb_ampdu_cleanup(struct ampdu_info *ampdu, struct scb *scb)
scb_ampdu_t *scb_ampdu = SCB_AMPDU_CUBBY(ampdu, scb);
u8 tid;
- WL_AMPDU_UPDN("scb_ampdu_cleanup: enter\n");
+ BCMMSG(ampdu->wlc->dev, "enter\n");
for (tid = 0; tid < AMPDU_MAX_SCB_TID; tid++) {
ampdu_cleanup_tid_ini(ampdu, scb_ampdu, tid, false);
}
@@ -605,8 +595,8 @@ wlc_sendampdu(struct ampdu_info *ampdu, struct wlc_txq_info *qi,
ndelim = txh->RTSPLCPFallback[AMPDU_FBR_NULL_DELIM];
seg_cnt += 1;
- WL_AMPDU_TX("wl%d: wlc_sendampdu: mpdu %d plcp_len %d\n",
- wlc->pub->unit, count, len);
+ BCMMSG(wlc->dev, "wl%d: mpdu %d plcp_len %d\n",
+ wlc->pub->unit, count, len);
/*
* aggregateable mpdu. For ucode/hw agg,
@@ -636,8 +626,9 @@ wlc_sendampdu(struct ampdu_info *ampdu, struct wlc_txq_info *qi,
dma_len += (u16) pkttotlen(p);
- WL_AMPDU_TX("wl%d: wlc_sendampdu: ampdu_len %d seg_cnt %d null delim %d\n",
- wlc->pub->unit, ampdu_len, seg_cnt, ndelim);
+ BCMMSG(wlc->dev, "wl%d: ampdu_len %d"
+ " seg_cnt %d null delim %d\n",
+ wlc->pub->unit, ampdu_len, seg_cnt, ndelim);
txh->MacTxControlLow = cpu_to_le16(mcl);
@@ -713,8 +704,9 @@ wlc_sendampdu(struct ampdu_info *ampdu, struct wlc_txq_info *qi,
/* test whether to add more */
if ((MCS_RATE(mcs, true, false) >= f->dmaxferrate) &&
(count == f->mcs2ampdu_table[mcs])) {
- WL_AMPDU_ERR("wl%d: PR 37644: stopping ampdu at %d for mcs %d\n",
- wlc->pub->unit, count, mcs);
+ BCMMSG(wlc->dev, "wl%d: PR 37644: stopping"
+ " ampdu at %d for mcs %d\n",
+ wlc->pub->unit, count, mcs);
break;
}
@@ -852,8 +844,8 @@ wlc_sendampdu(struct ampdu_info *ampdu, struct wlc_txq_info *qi,
WLC_SET_MIMO_PLCP_AMPDU(txh->FragPLCPFallback);
}
- WL_AMPDU_TX("wl%d: wlc_sendampdu: count %d ampdu_len %d\n",
- wlc->pub->unit, count, ampdu_len);
+ BCMMSG(wlc->dev, "wl%d: count %d ampdu_len %d\n",
+ wlc->pub->unit, count, ampdu_len);
/* inform rate_sel if it this is a rate probe pkt */
frameid = le16_to_cpu(txh->TxFrameID);
@@ -1075,11 +1067,10 @@ wlc_ampdu_dotxstatus_complete(struct ampdu_info *ampdu, struct scb *scb,
ack_recd = false;
if (ba_recd) {
bindex = MODSUB_POW2(seq, start_seq, SEQNUM_MAX);
-
- WL_AMPDU_TX("%s: tid %d seq is %d, start_seq is %d, bindex is %d set %d, index %d\n",
- __func__, tid, seq, start_seq, bindex,
- isset(bitmap, bindex), index);
-
+ BCMMSG(wlc->dev, "tid %d seq %d,"
+ " start_seq %d, bindex %d set %d, index %d\n",
+ tid, seq, start_seq, bindex,
+ isset(bitmap, bindex), index);
/* if acked then clear bit and free packet */
if ((bindex < AMPDU_TX_BA_MAX_WSIZE)
&& isset(bitmap, bindex)) {
@@ -1157,8 +1148,7 @@ ampdu_cleanup_tid_ini(struct ampdu_info *ampdu, scb_ampdu_t *scb_ampdu, u8 tid,
if (!ini)
return;
- WL_AMPDU_CTL("wl%d: ampdu_cleanup_tid_ini: tid %d\n",
- ampdu->wlc->pub->unit, tid);
+ BCMMSG(ampdu->wlc->dev, "wl%d: tid %d\n", ampdu->wlc->pub->unit, tid);
if (ini->tx_in_transit && !force)
return;
@@ -1200,13 +1190,13 @@ static int wlc_ampdu_set(struct ampdu_info *ampdu, bool on)
if (on) {
if (!N_ENAB(wlc->pub)) {
- WL_AMPDU_ERR("wl%d: driver not nmode enabled\n",
- wlc->pub->unit);
+ dev_err(ampdu->wlc->dev, "wl%d: driver not "
+ "nmode enabled\n", wlc->pub->unit);
return -ENOTSUPP;
}
if (!wlc_ampdu_cap(ampdu)) {
- WL_AMPDU_ERR("wl%d: device not ampdu capable\n",
- wlc->pub->unit);
+ dev_err(ampdu->wlc->dev, "wl%d: device not "
+ "ampdu capable\n", wlc->pub->unit);
return -ENOTSUPP;
}
wlc->pub->_ampdu = on;
--
1.7.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
