On Wed, Apr 13, 2011 at 09:54:45PM +0200, Joost Pjotr Vermeer wrote: > Hi, > > I tried the new gma500 driver from staging on my Sony VGN-P21Z. It > seems to work very nice. > > But backlight control does not work. It has worked with a previous > version of the staging/gma500 driver. I can solve it by removing the > call to acpi_video_register() from psb_driver_load() in psb_drv.c. > > Can I try anything to find a more specific cause for this? > Got same hardware, and the backlight isnt working properly yet. As the driver is very new and alan is working away at bits and pieces I wouldnt expect to much yet. Oh and I assume you already grabbed the psb-bl "error" at bootup: [ 1.507066] fbcon: psbfb (fb0) is primary device [ 1.982816] fb0: psbfb frame buffer device [ 1.982871] psb-bl: invalid backlight type [ 1.982951] [<c131e603>] ? psb_backlight_init+0x32/0x185 [ 1.982960] [<c1320467>] ? psb_driver_load+0x47f/0x4b6 kristoffer@Boggieman:~$ See what it expects for backlight type at init. Btw, if you are lazy then just clone my git repository with latest and greatest for gma500. Best wishes Kristoffer > âÂJoost > > --------- dmesg > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 2.6.39-rc3psb23 (jp@violet) (gcc version > 4.4.5 (Debian 4.4.5-8) ) #1 SMP Tue Apr 12 19:26:35 CEST 2011 > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f64d000 (usable) > [ 0.000000] BIOS-e820: 000000007f64d000 - 000000007f64e000 (reserved) > [ 0.000000] BIOS-e820: 000000007f64e000 - 000000007f656000 (ACPI NVS) > [ 0.000000] BIOS-e820: 000000007f656000 - 000000007f69f000 (reserved) > [ 0.000000] BIOS-e820: 000000007f69f000 - 000000007f6a2000 (usable) > [ 0.000000] BIOS-e820: 000000007f6a2000 - 000000007f6df000 (ACPI NVS) > [ 0.000000] BIOS-e820: 000000007f6df000 - 000000007f6ef000 (ACPI data) > [ 0.000000] BIOS-e820: 000000007f6ef000 - 000000007f6f0000 (usable) > [ 0.000000] BIOS-e820: 000000007f6f0000 - 0000000080000000 (reserved) > [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) > [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) > [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) > [ 0.000000] BIOS-e820: 00000000fed40000 - 00000000fed4c000 (reserved) > [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) > [ 0.000000] Notice: NX (Execute Disable) protection cannot be > enabled: non-PAE kernel! > [ 0.000000] DMI 2.4 present. > [ 0.000000] DMI: Sony Corporation VGN-P21Z_W/VAIO, BIOS R2071U3 09/29/2009 > [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 > (usable) ==> (reserved) > [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) > [ 0.000000] last_pfn = 0x7f6f0 max_arch_pfn = 0x100000 > [ 0.000000] MTRR default type: uncachable > [ 0.000000] MTRR fixed ranges enabled: > [ 0.000000] 00000-9FFFF write-back > [ 0.000000] A0000-DFFFF uncachable > [ 0.000000] E0000-EFFFF write-through > [ 0.000000] F0000-FFFFF write-protect > [ 0.000000] MTRR variable ranges enabled: > [ 0.000000] 0 disabled > [ 0.000000] 1 base 000000000 mask 080000000 write-back > [ 0.000000] 2 base 07F800000 mask 0FF800000 uncachable > [ 0.000000] 3 disabled > [ 0.000000] 4 base 07F6F0000 mask 0FFFF0000 uncachable > [ 0.000000] 5 disabled > [ 0.000000] 6 disabled > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > [ 0.000000] e820 update range: 000000007f6f0000 - 000000007f700000 > (usable) ==> (reserved) > [ 0.000000] initial memory mapped : 0 - 01800000 > [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 > [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 > [ 0.000000] 0000000000 - 0000400000 page 4k > [ 0.000000] 0000400000 - 0037400000 page 2M > [ 0.000000] 0037400000 - 00377fe000 page 4k > [ 0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000 > [ 0.000000] RAMDISK: 37527000 - 37ff0000 > [ 0.000000] Allocated new RAMDISK: 36a5e000 - 37526ddd > [ 0.000000] Move RAMDISK from 0000000037527000 - 0000000037fefddc > to 36a5e000 - 37526ddc > [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 Sony) > [ 0.000000] ACPI: XSDT 7f6ee120 00064 (v01 Sony VAIO 20090929 > 01000013) > [ 0.000000] ACPI: FACP 7f6ed000 000F4 (v03 Sony VAIO 20090929 > MSFT 01000013) > [ 0.000000] ACPI Warning: Invalid length for Pm1aControlBlock: 32, > using default 16 (20110316/tbfadt-610) > [ 0.000000] ACPI: DSDT 7f6e2000 05728 (v01 Sony VAIO 20090929 > MSFT 01000013) > [ 0.000000] ACPI: FACS 7f6a6000 00040 > [ 0.000000] ACPI: HPET 7f6ec000 00038 (v01 Sony VAIO 20090929 > MSFT 01000013) > [ 0.000000] ACPI: APIC 7f6eb000 00068 (v01 Sony VAIO 20090929 > MSFT 01000013) > [ 0.000000] ACPI: MCFG 7f6ea000 0003C (v01 Sony VAIO 20090929 > MSFT 01000013) > [ 0.000000] ACPI: SLIC 7f6e9000 00176 (v01 Sony VAIO 20090929 > MSFT 01000013) > [ 0.000000] ACPI: ASF! 7f6e8000 000A5 (v32 Sony VAIO 20090929 > MSFT 01000013) > [ 0.000000] ACPI: BOOT 7f6e1000 00028 (v01 Sony VAIO 20090929 > MSFT 01000013) > [ 0.000000] ACPI: SSDT 7f6df000 004CE (v02 Sony VAIO 20090929 > INTL 20051117) > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] 1150MB HIGHMEM available. > [ 0.000000] 887MB LOWMEM available. > [ 0.000000] mapped low ram: 0 - 377fe000 > [ 0.000000] low ram: 0 - 377fe000 > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000010 -> 0x00001000 > [ 0.000000] Normal 0x00001000 -> 0x000377fe > [ 0.000000] HighMem 0x000377fe -> 0x0007f6f0 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[4] active PFN ranges > [ 0.000000] 0: 0x00000010 -> 0x0000009f > [ 0.000000] 0: 0x00000100 -> 0x0007f64d > [ 0.000000] 0: 0x0007f69f -> 0x0007f6a2 > [ 0.000000] 0: 0x0007f6ef -> 0x0007f6f0 > [ 0.000000] On node 0 totalpages: 521696 > [ 0.000000] free_area_init_node: node 0, pgdat c13c0140, > node_mem_map f5a6e200 > [ 0.000000] DMA zone: 32 pages used for memmap > [ 0.000000] DMA zone: 0 pages reserved > [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 > [ 0.000000] Normal zone: 1744 pages used for memmap > [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 > [ 0.000000] HighMem zone: 2302 pages used for memmap > [ 0.000000] HighMem zone: 292181 pages, LIFO batch:31 > [ 0.000000] Using APIC driver default > [ 0.000000] ACPI: PM-Timer IO Port: 0x408 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 > [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs > [ 0.000000] nr_irqs_gsi: 40 > [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 > [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 > [ 0.000000] Allocating PCI resources starting at 80000000 (gap: > 80000000:60000000) > [ 0.000000] Booting paravirtualized kernel on bare hardware > [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 > nr_cpu_ids:2 nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 12 pages/cpu @f5400000 s27200 r0 d21952 u2097152 > [ 0.000000] pcpu-alloc: s27200 r0 d21952 u2097152 alloc=1*4194304 > [ 0.000000] pcpu-alloc: [0] 0 1 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. > Total pages: 517618 > [ 0.000000] Kernel command line: > BOOT_IMAGE=/vmlinuz-2.6.39-rc3psb23 root=/dev/mapper/violet-root ro > quiet > [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) > [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > [ 0.000000] Initializing CPU#0 > [ 0.000000] Initializing HighMem for node 0 (000377fe:0007f6f0) > [ 0.000000] Memory: 2053608k/2087872k available (2613k kernel code, > 33176k reserved, 1252k data, 404k init, 1177932k highmem) > [ 0.000000] virtual kernel memory layout: > [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB) > [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) > [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) > [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) > [ 0.000000] .init : 0xc13c7000 - 0xc142c000 ( 404 kB) > [ 0.000000] .data : 0xc128d5b8 - 0xc13c6780 (1252 kB) > [ 0.000000] .text : 0xc1000000 - 0xc128d5b8 (2613 kB) > [ 0.000000] Checking if this processor honours the WP bit even in > supervisor mode...Ok. > [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, > CPUs=2, Nodes=1 > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] RCU-based detection of stalled CPUs is disabled. > [ 0.000000] NR_IRQS:1280 > [ 0.000000] CPU 0 irqstacks, hard=f500e000 soft=f5020000 > [ 0.000000] Console: colour VGA+ 80x25 > [ 0.000000] console [tty0] enabled > [ 0.000000] hpet clockevent registered > [ 0.000000] Fast TSC calibration using PIT > [ 0.000000] Detected 1333.209 MHz processor. > [ 0.004010] Calibrating delay loop (skipped), value calculated > using timer frequency.. 2666.41 BogoMIPS (lpj=5332836) > [ 0.004030] pid_max: default: 32768 minimum: 301 > [ 0.004408] Security Framework initialized > [ 0.004422] SELinux: Disabled at boot. > [ 0.004549] Mount-cache hash table entries: 512 > [ 0.005769] Initializing cgroup subsys ns > [ 0.005783] ns_cgroup deprecated: consider using the > 'clone_children' flag without the ns_cgroup. > [ 0.005795] Initializing cgroup subsys cpuacct > [ 0.005903] Initializing cgroup subsys devices > [ 0.005914] Initializing cgroup subsys freezer > [ 0.005923] Initializing cgroup subsys net_cls > [ 0.006079] CPU: Physical Processor ID: 0 > [ 0.006088] CPU: Processor Core ID: 0 > [ 0.006098] mce: CPU supports 5 MCE banks > [ 0.006127] CPU0: Thermal monitoring enabled (TM2) > [ 0.006140] using mwait in idle threads. > [ 0.012569] ACPI: Core revision 20110316 > [ 0.028155] Enabling APIC mode: Flat. Using 1 I/O APICs > [ 0.028506] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.068479] CPU0: Intel(R) Atom(TM) CPU Z520 @ 1.33GHz stepping 02 > [ 0.072003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver. > [ 0.072003] ... version: 3 > [ 0.072003] ... bit width: 40 > [ 0.072003] ... generic registers: 2 > [ 0.072003] ... value mask: 000000ffffffffff > [ 0.072003] ... max period: 000000007fffffff > [ 0.072003] ... fixed-purpose events: 3 > [ 0.072003] ... event mask: 0000000700000003 > [ 0.072003] CPU 1 irqstacks, hard=f508a000 soft=f508c000 > [ 0.072003] Booting Node 0, Processors #1 Ok. > [ 0.072003] smpboot cpu 1: start_ip = 9b000 > [ 0.008000] Initializing CPU#1 > [ 0.160040] Brought up 2 CPUs > [ 0.160051] Total of 2 processors activated (5332.93 BogoMIPS). > [ 0.160608] devtmpfs: initialized > [ 0.160762] PM: Registering ACPI NVS region at 7f64e000 (32768 bytes) > [ 0.160762] PM: Registering ACPI NVS region at 7f6a2000 (249856 bytes) > [ 0.160762] print_constraints: dummy: > [ 0.160762] NET: Registered protocol family 16 > [ 0.160970] ACPI FADT declares the system doesn't support PCIe > ASPM, so disable it > [ 0.160978] ACPI: bus type pci registered > [ 0.161318] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem > 0xe0000000-0xefffffff] (base 0xe0000000) > [ 0.161329] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 > [ 0.161335] PCI: Using MMCONFIG for extended config space > [ 0.161340] PCI: Using configuration type 1 for base access > [ 0.164169] bio: create slab <bio-0> at 0 > [ 0.166894] ACPI: EC: Look up EC in DSDT > [ 0.170057] ACPI: Executed 1 blocks of module-level executable AML code > [ 0.187547] ACPI: SSDT 7f658c90 001F7 (v02 Sony VAIO 20090929 > INTL 20051117) > [ 0.188262] ACPI: Dynamic OEM Table Load: > [ 0.188272] ACPI: SSDT (null) 001F7 (v02 Sony VAIO 20090929 > INTL 20051117) > [ 0.188708] ACPI: SSDT 7f657690 0061C (v02 Sony VAIO 20090929 > INTL 20051117) > [ 0.189354] ACPI: Dynamic OEM Table Load: > [ 0.189363] ACPI: SSDT (null) 0061C (v02 Sony VAIO 20090929 > INTL 20051117) > [ 0.212752] ACPI: SSDT 7f658f10 000D0 (v02 Sony VAIO 20090929 > INTL 20051117) > [ 0.213424] ACPI: Dynamic OEM Table Load: > [ 0.213433] ACPI: SSDT (null) 000D0 (v02 Sony VAIO 20090929 > INTL 20051117) > [ 0.213698] ACPI: SSDT 7f656f10 00083 (v02 Sony VAIO 20090929 > INTL 20051117) > [ 0.214346] ACPI: Dynamic OEM Table Load: > [ 0.214355] ACPI: SSDT (null) 00083 (v02 Sony VAIO 20090929 > INTL 20051117) > [ 0.236663] ACPI: Interpreter enabled > [ 0.236677] ACPI: (supports S0 S3 S4 S5) > [ 0.236734] ACPI: Using IOAPIC for interrupt routing > [ 0.246139] ACPI: EC: GPE = 0xd, I/O: command/status = 0x66, data = 0x62 > [ 0.246471] ACPI: No dock devices found. > [ 0.246482] PCI: Using host bridge windows from ACPI; if necessary, > use "pci=nocrs" and report a bug > [ 0.246993] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) > [ 0.247876] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] > [ 0.247887] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] > [ 0.247895] pci_root PNP0A08:00: host bridge window [mem > 0x000a0000-0x000bffff] > [ 0.247904] pci_root PNP0A08:00: host bridge window [mem > 0x7f800000-0x7fffffff] > [ 0.247912] pci_root PNP0A08:00: host bridge window [mem > 0x000c0000-0x000dffff] > [ 0.247921] pci_root PNP0A08:00: host bridge window [mem > 0x000e0000-0x000effff] > [ 0.247931] pci_root PNP0A08:00: host bridge window [mem > 0x000f0000-0x000fffff] > [ 0.247942] pci_root PNP0A08:00: host bridge window [mem > 0x80000000-0xfebfffff] > [ 0.247978] pci 0000:00:00.0: [8086:8100] type 0 class 0x000600 > [ 0.248083] pci 0000:00:02.0: [8086:8108] type 0 class 0x000300 > [ 0.248114] pci 0000:00:02.0: reg 10: [mem 0x94200000-0x9427ffff] > [ 0.248130] pci 0000:00:02.0: reg 14: [io 0x6070-0x6077] > [ 0.248147] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff] > [ 0.248163] pci 0000:00:02.0: reg 1c: [mem 0x94280000-0x942bffff] > [ 0.248287] pci 0000:00:1b.0: [8086:811b] type 0 class 0x000403 > [ 0.248313] pci 0000:00:1b.0: reg 10: [mem 0x942c0000-0x942c3fff 64bit] > [ 0.248386] pci 0000:00:1b.0: PME# supported from D0 D3hot > [ 0.248396] pci 0000:00:1b.0: PME# disabled > [ 0.248429] pci 0000:00:1c.0: [8086:8110] type 1 class 0x000604 > [ 0.248502] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > [ 0.248512] pci 0000:00:1c.0: PME# disabled > [ 0.248546] pci 0000:00:1c.1: [8086:8112] type 1 class 0x000604 > [ 0.248618] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > [ 0.248627] pci 0000:00:1c.1: PME# disabled > [ 0.248666] pci 0000:00:1d.0: [8086:8114] type 0 class 0x000c03 > [ 0.248714] pci 0000:00:1d.0: reg 20: [io 0x6040-0x605f] > [ 0.248760] pci 0000:00:1d.1: [8086:8115] type 0 class 0x000c03 > [ 0.248813] pci 0000:00:1d.1: reg 20: [io 0x6020-0x603f] > [ 0.248860] pci 0000:00:1d.2: [8086:8116] type 0 class 0x000c03 > [ 0.248912] pci 0000:00:1d.2: reg 20: [io 0x6000-0x601f] > [ 0.248975] pci 0000:00:1d.7: [8086:8117] type 0 class 0x000c03 > [ 0.249010] pci 0000:00:1d.7: reg 10: [mem 0x00000000-0x000003ff] > [ 0.249124] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > [ 0.249135] pci 0000:00:1d.7: PME# disabled > [ 0.249167] pci 0000:00:1f.0: [8086:8119] type 0 class 0x000601 > [ 0.249264] pci 0000:00:1f.1: [8086:811a] type 0 class 0x000101 > [ 0.249318] pci 0000:00:1f.1: reg 20: [io 0x6060-0x606f] > [ 0.249439] pci 0000:01:00.0: [11ab:4380] type 0 class 0x000200 > [ 0.249474] pci 0000:01:00.0: reg 10: [mem 0x93100000-0x93103fff 64bit] > [ 0.249494] pci 0000:01:00.0: reg 18: [io 0x4000-0x40ff] > [ 0.249551] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] > [ 0.249605] pci 0000:01:00.0: supports D1 D2 > [ 0.249611] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.249621] pci 0000:01:00.0: PME# disabled > [ 0.249663] pci 0000:00:1c.0: PCI bridge to [bus 01-01] > [ 0.249672] pci 0000:00:1c.0: bridge window [io 0x4000-0x5fff] > [ 0.249682] pci 0000:00:1c.0: bridge window [mem 0x93100000-0x941fffff] > [ 0.249693] pci 0000:00:1c.0: bridge window [mem > 0x90000000-0x90ffffff pref] > [ 0.249770] pci 0000:02:00.0: [168c:002a] type 0 class 0x000280 > [ 0.249804] pci 0000:02:00.0: reg 10: [mem 0x92000000-0x9200ffff 64bit] > [ 0.249914] pci 0000:02:00.0: supports D1 > [ 0.249921] pci 0000:02:00.0: PME# supported from D0 D1 D3hot > [ 0.249931] pci 0000:02:00.0: PME# disabled > [ 0.249975] pci 0000:00:1c.1: PCI bridge to [bus 02-02] > [ 0.249985] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] > [ 0.249995] pci 0000:00:1c.1: bridge window [mem 0x92000000-0x930fffff] > [ 0.250005] pci 0000:00:1c.1: bridge window [mem > 0x91000000-0x91ffffff pref] > [ 0.250025] pci_bus 0000:00: on NUMA node 0 > [ 0.250035] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 0.250347] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] > [ 0.250487] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] > [ 0.250682] pci0000:00: Requesting ACPI _OSC control (0x1d) > [ 0.250689] Unable to assume _OSC PCIe control. Disabling ASPM > [ 0.256574] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11 12) > [ 0.256739] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12) > [ 0.256900] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) > [ 0.257060] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12) > [ 0.257221] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12) > [ 0.257381] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12) > [ 0.257542] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12) > [ 0.257702] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) > [ 0.257935] vgaarb: device added: > PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none > [ 0.257952] vgaarb: loaded > [ 0.258081] PCI: Using ACPI for IRQ routing > [ 0.258089] PCI: pci_cache_line_size set to 64 bytes > [ 0.258183] reserve RAM buffer: 000000000009fc00 - 000000000009ffff > [ 0.258191] reserve RAM buffer: 000000007f64d000 - 000000007fffffff > [ 0.258200] reserve RAM buffer: 000000007f6a2000 - 000000007fffffff > [ 0.258208] reserve RAM buffer: 000000007f6f0000 - 000000007fffffff > [ 0.258539] HPET: 3 timers in total, 0 timers will be used for per-cpu timer > [ 0.258551] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 > [ 0.258564] hpet0: 3 comparators, 64-bit 14.318180 MHz counter > [ 0.264085] Switching to clocksource hpet > [ 0.267017] pnp: PnP ACPI init > [ 0.267059] ACPI: bus type pnp registered > [ 0.267787] Switched to NOHz mode on CPU #0 > [ 0.267854] Switched to NOHz mode on CPU #1 > [ 0.267969] pnp 00:00: [bus 00-ff] > [ 0.267979] pnp 00:00: [io 0x0000-0x0cf7 window] > [ 0.267986] pnp 00:00: [io 0x0cf8-0x0cff] > [ 0.267994] pnp 00:00: [io 0x0d00-0xffff window] > [ 0.268002] pnp 00:00: [mem 0x000a0000-0x000bffff window] > [ 0.268025] pnp 00:00: [mem 0x7f800000-0x7fffffff window] > [ 0.268033] pnp 00:00: [mem 0x000c0000-0x000dffff window] > [ 0.268041] pnp 00:00: [mem 0x000e0000-0x000effff window] > [ 0.268048] pnp 00:00: [mem 0x000f0000-0x000fffff window] > [ 0.268056] pnp 00:00: [mem 0x80000000-0xfebfffff window] > [ 0.268198] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 > PNP0a03 (active) > [ 0.268443] pnp 00:01: [mem 0xe0000000-0xefffffff] > [ 0.268451] pnp 00:01: [mem 0xfed10000-0xfed13fff] > [ 0.268459] pnp 00:01: [mem 0x40000000-0x7fffffff] > [ 0.268466] pnp 00:01: [mem 0xfec00000-0xfec00fff] > [ 0.268473] pnp 00:01: [mem 0xfed40000-0xfed4bfff] > [ 0.268480] pnp 00:01: [mem 0xfee00000-0xfee00fff] > [ 0.268487] pnp 00:01: [mem 0xffc00000-0xffc3ffff] > [ 0.268603] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved > [ 0.268613] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved > [ 0.268622] system 00:01: [mem 0x40000000-0x7fffffff] could not be reserved > [ 0.268631] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved > [ 0.268640] system 00:01: [mem 0xfed40000-0xfed4bfff] has been reserved > [ 0.268649] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved > [ 0.268658] system 00:01: [mem 0xffc00000-0xffc3ffff] has been reserved > [ 0.268668] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.269250] pnp 00:02: Plug and Play ACPI device, IDs SNY6001 (disabled) > [ 0.269283] pnp 00:03: [mem 0xff000000-0xffffffff] > [ 0.269365] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active) > [ 0.269465] pnp 00:04: [mem 0xfed00000-0xfed003ff] > [ 0.269582] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved > [ 0.269593] system 00:04: Plug and Play ACPI device, IDs PNP0103 > PNP0c01 (active) > [ 0.269633] pnp 00:05: [io 0x0070-0x0077] > [ 0.269657] pnp 00:05: [irq 8] > [ 0.269743] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) > [ 0.269783] pnp 00:06: [io 0x002e-0x002f] > [ 0.269790] pnp 00:06: [io 0x004e-0x004f] > [ 0.269797] pnp 00:06: [io 0x0061] > [ 0.269803] pnp 00:06: [io 0x0063] > [ 0.269809] pnp 00:06: [io 0x0065] > [ 0.269815] pnp 00:06: [io 0x0067] > [ 0.269822] pnp 00:06: [io 0x0080-0x0083] > [ 0.269828] pnp 00:06: [io 0x0092] > [ 0.269834] pnp 00:06: [io 0x00b2-0x00b3] > [ 0.269841] pnp 00:06: [io 0x2000] > [ 0.269847] pnp 00:06: [io 0x2004] > [ 0.269854] pnp 00:06: [io 0x0820-0x0823] > [ 0.269861] pnp 00:06: [io 0x0000] > [ 0.269867] pnp 00:06: [io 0x0084-0x008f] > [ 0.269874] pnp 00:06: [io 0x0374-0x0375] > [ 0.269880] pnp 00:06: [io 0x0377] > [ 0.269887] pnp 00:06: [io 0x03f4-0x03f5] > [ 0.269893] pnp 00:06: [io 0x03f7] > [ 0.269900] pnp 00:06: [io 0x0400-0x040f] > [ 0.269907] pnp 00:06: [io 0x0410-0x041f] > [ 0.269913] pnp 00:06: [io 0x0600-0x063f] > [ 0.269920] pnp 00:06: [io 0x0500-0x055f] > [ 0.269927] pnp 00:06: [io 0x1040-0x107f] > [ 0.270088] system 00:06: [io 0x2000] has been reserved > [ 0.270097] system 00:06: [io 0x2004] has been reserved > [ 0.270107] system 00:06: [io 0x0820-0x0823] has been reserved > [ 0.270116] system 00:06: [io 0x0374-0x0375] has been reserved > [ 0.270124] system 00:06: [io 0x0377] has been reserved > [ 0.270133] system 00:06: [io 0x03f4-0x03f5] has been reserved > [ 0.270141] system 00:06: [io 0x03f7] has been reserved > [ 0.270149] system 00:06: [io 0x0400-0x040f] has been reserved > [ 0.270158] system 00:06: [io 0x0410-0x041f] has been reserved > [ 0.270167] system 00:06: [io 0x0600-0x063f] has been reserved > [ 0.270176] system 00:06: [io 0x0500-0x055f] has been reserved > [ 0.270184] system 00:06: [io 0x1040-0x107f] has been reserved > [ 0.270194] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.270232] pnp 00:07: [io 0x0060] > [ 0.270239] pnp 00:07: [io 0x0064] > [ 0.270252] pnp 00:07: [irq 1] > [ 0.270340] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) > [ 0.270376] pnp 00:08: [irq 12] > [ 0.270465] pnp 00:08: Plug and Play ACPI device, IDs SNY9010 > PNP0f13 (active) > [ 0.270512] pnp: PnP ACPI: found 9 devices > [ 0.270517] ACPI: ACPI bus type pnp unregistered > [ 0.270525] PnPBIOS: Disabled by ACPI PNP > [ 0.309903] pci 0000:01:00.0: no compatible bridge window for [mem > 0xfffe0000-0xffffffff pref] > [ 0.309944] pci 0000:00:1d.7: BAR 0: assigned [mem 0x942c4000-0x942c43ff] > [ 0.309960] pci 0000:00:1d.7: BAR 0: set to [mem > 0x942c4000-0x942c43ff] (PCI address [0x942c4000-0x942c43ff]) > [ 0.309972] pci 0000:01:00.0: BAR 6: assigned [mem > 0x90000000-0x9001ffff pref] > [ 0.309980] pci 0000:00:1c.0: PCI bridge to [bus 01-01] > [ 0.309989] pci 0000:00:1c.0: bridge window [io 0x4000-0x5fff] > [ 0.310000] pci 0000:00:1c.0: bridge window [mem 0x93100000-0x941fffff] > [ 0.310011] pci 0000:00:1c.0: bridge window [mem > 0x90000000-0x90ffffff pref] > [ 0.310024] pci 0000:00:1c.1: PCI bridge to [bus 02-02] > [ 0.310032] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] > [ 0.310044] pci 0000:00:1c.1: bridge window [mem 0x92000000-0x930fffff] > [ 0.310054] pci 0000:00:1c.1: bridge window [mem > 0x91000000-0x91ffffff pref] > [ 0.310092] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 0.310103] pci 0000:00:1c.0: setting latency timer to 64 > [ 0.310122] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [ 0.310132] pci 0000:00:1c.1: setting latency timer to 64 > [ 0.310142] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] > [ 0.310150] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] > [ 0.310158] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] > [ 0.310166] pci_bus 0000:00: resource 7 [mem 0x7f800000-0x7fffffff] > [ 0.310174] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff] > [ 0.310182] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000effff] > [ 0.310190] pci_bus 0000:00: resource 10 [mem 0x000f0000-0x000fffff] > [ 0.310198] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff] > [ 0.310206] pci_bus 0000:01: resource 0 [io 0x4000-0x5fff] > [ 0.310214] pci_bus 0000:01: resource 1 [mem 0x93100000-0x941fffff] > [ 0.310222] pci_bus 0000:01: resource 2 [mem 0x90000000-0x90ffffff pref] > [ 0.310230] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] > [ 0.310238] pci_bus 0000:02: resource 1 [mem 0x92000000-0x930fffff] > [ 0.310246] pci_bus 0000:02: resource 2 [mem 0x91000000-0x91ffffff pref] > [ 0.310416] NET: Registered protocol family 2 > [ 0.310637] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > [ 0.311387] TCP established hash table entries: 131072 (order: 8, > 1048576 bytes) > [ 0.312675] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) > [ 0.313343] TCP: Hash tables configured (established 131072 bind 65536) > [ 0.313351] TCP reno registered > [ 0.313363] UDP hash table entries: 512 (order: 2, 16384 bytes) > [ 0.313391] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) > [ 0.313950] NET: Registered protocol family 1 > [ 0.314000] pci 0000:00:02.0: Boot video device > [ 0.314099] PCI: CLS 0 bytes, default 64 > [ 0.314234] Unpacking initramfs... > [ 1.026867] Freeing initrd memory: 11044k freed > [ 1.042345] Simple Boot Flag at 0x44 set to 0x1 > [ 1.043292] audit: initializing netlink socket (disabled) > [ 1.043324] type=2000 audit(1302723310.036:1): initialized > [ 1.071387] highmem bounce pool size: 64 pages > [ 1.071402] HugeTLB registered 4 MB page size, pre-allocated 0 pages > [ 1.076692] VFS: Disk quotas dquot_6.5.2 > [ 1.077021] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > [ 1.077370] msgmni has been set to 1731 > [ 1.078011] Block layer SCSI generic (bsg) driver version 0.4 > loaded (major 253) > [ 1.078019] io scheduler noop registered > [ 1.078025] io scheduler deadline registered > [ 1.078063] io scheduler cfq registered (default) > [ 1.078601] isapnp: Scanning for PnP cards... > [ 1.432923] isapnp: No Plug & Play device found > [ 1.433092] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 1.676835] Linux agpgart interface v0.103 > [ 1.677371] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] > at 0x60,0x64 irq 1,12 > [ 1.680452] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 1.680474] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 1.680791] mousedev: PS/2 mouse device common for all mice > [ 1.680904] rtc_cmos 00:05: RTC can wake from S4 > [ 1.695032] input: AT Translated Set 2 keyboard as > /devices/platform/i8042/serio0/input/input0 > [ 1.708266] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 > [ 1.708315] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs > [ 1.708369] cpuidle: using governor ladder > [ 1.708375] cpuidle: using governor menu > [ 1.709083] TCP cubic registered > [ 1.709529] NET: Registered protocol family 10 > [ 1.711306] Mobile IPv6 > [ 1.711314] NET: Registered protocol family 17 > [ 1.711326] Registering the dns_resolver key type > [ 1.711377] Using IPI No-Shortcut mode > [ 1.711616] PM: Hibernation image not present or could not be loaded. > [ 1.711643] registered taskstats version 1 > [ 1.712158] rtc_cmos 00:05: setting system clock to 2011-04-13 > 19:35:11 UTC (1302723311) > [ 1.712309] Initializing network drop monitor service > [ 1.712527] Freeing unused kernel memory: 404k freed > [ 1.712878] Write protecting the kernel text: 2616k > [ 1.712925] Write protecting the kernel read-only data: 896k > [ 1.874155] udev[46]: starting version 164 > [ 2.040129] Refined TSC clocksource calibration: 1333.284 MHz. > [ 2.040143] Switching to clocksource tsc > [ 2.138432] sky2: driver version 1.28 > [ 2.138517] sky2 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 2.138544] sky2 0000:01:00.0: setting latency timer to 64 > [ 2.138615] sky2 0000:01:00.0: Yukon-2 UL 2 chip revision 0 > [ 2.138836] sky2 0000:01:00.0: irq 40 for MSI/MSI-X > [ 2.160004] thermal LNXTHERM:00: registered as thermal_zone0 > [ 2.160036] ACPI: Thermal Zone [ATF0] (50 C) > [ 2.160094] sky2 0000:01:00.0: eth0: addr 00:1d:ba:bb:5e:df > [ 2.223637] usbcore: registered new interface driver usbfs > [ 2.224270] usbcore: registered new interface driver hub > [ 2.224416] usbcore: registered new device driver usb > [ 2.255580] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 2.255646] ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002) > [ 2.255681] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20 > [ 2.255740] ehci_hcd 0000:00:1d.7: setting latency timer to 64 > [ 2.255752] ehci_hcd 0000:00:1d.7: EHCI Host Controller > [ 2.255883] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned > bus number 1 > [ 2.280111] ehci_hcd 0000:00:1d.7: debug port 1 > [ 2.284025] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported > [ 2.284079] ehci_hcd 0000:00:1d.7: irq 20, io mem 0x942c4000 > [ 2.296027] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > [ 2.296131] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > [ 2.296143] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.296153] usb usb1: Product: EHCI Host Controller > [ 2.296163] usb usb1: Manufacturer: Linux 2.6.39-rc3psb23 ehci_hcd > [ 2.296172] usb usb1: SerialNumber: 0000:00:1d.7 > [ 2.296942] hub 1-0:1.0: USB hub found > [ 2.296963] hub 1-0:1.0: 8 ports detected > [ 2.316090] SCSI subsystem initialized > [ 2.361566] uhci_hcd: USB Universal Host Controller Interface driver > [ 2.361704] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 > [ 2.361729] uhci_hcd 0000:00:1d.0: setting latency timer to 64 > [ 2.361741] uhci_hcd 0000:00:1d.0: UHCI Host Controller > [ 2.361775] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned > bus number 2 > [ 2.384109] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00006040 > [ 2.384254] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 > [ 2.384267] usb usb2: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.384278] usb usb2: Product: UHCI Host Controller > [ 2.384287] usb usb2: Manufacturer: Linux 2.6.39-rc3psb23 uhci_hcd > [ 2.384296] usb usb2: SerialNumber: 0000:00:1d.0 > [ 2.384767] hub 2-0:1.0: USB hub found > [ 2.384786] hub 2-0:1.0: 2 ports detected > [ 2.384997] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 > [ 2.385023] uhci_hcd 0000:00:1d.1: setting latency timer to 64 > [ 2.385034] uhci_hcd 0000:00:1d.1: UHCI Host Controller > [ 2.385065] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned > bus number 3 > [ 2.427881] libata version 3.00 loaded. > [ 2.440142] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00006020 > [ 2.440305] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 > [ 2.440320] usb usb3: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.440342] usb usb3: Product: UHCI Host Controller > [ 2.440349] usb usb3: Manufacturer: Linux 2.6.39-rc3psb23 uhci_hcd > [ 2.440356] usb usb3: SerialNumber: 0000:00:1d.1 > [ 2.440728] hub 3-0:1.0: USB hub found > [ 2.440748] hub 3-0:1.0: 2 ports detected > [ 2.440962] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23 > [ 2.440981] uhci_hcd 0000:00:1d.2: setting latency timer to 64 > [ 2.440989] uhci_hcd 0000:00:1d.2: UHCI Host Controller > [ 2.441015] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned > bus number 4 > [ 2.456127] uhci_hcd 0000:00:1d.2: irq 23, io base 0x00006000 > [ 2.456279] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > [ 2.456293] usb usb4: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.456305] usb usb4: Product: UHCI Host Controller > [ 2.456316] usb usb4: Manufacturer: Linux 2.6.39-rc3psb23 uhci_hcd > [ 2.456327] usb usb4: SerialNumber: 0000:00:1d.2 > [ 2.456700] hub 4-0:1.0: USB hub found > [ 2.456721] hub 4-0:1.0: 2 ports detected > [ 2.456918] pata_sch 0000:00:1f.1: version 0.2 > [ 2.457015] pata_sch 0000:00:1f.1: setting latency timer to 64 > [ 2.458491] scsi0 : pata_sch > [ 2.458878] scsi1 : pata_sch > [ 2.459969] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6060 irq 14 > [ 2.459982] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6068 irq 15 > [ 2.608141] usb 1-3: new high speed USB device number 2 using ehci_hcd > [ 2.673357] ata1.00: ATA-7: TOSHIBA MK8025GAL, BD102A, max UDMA/100 > [ 2.673374] ata1.00: 156301488 sectors, multi 16: LBA48 > [ 2.673394] ata1.00: limited to UDMA/33 due to 40-wire cable > [ 2.688611] ata1.00: configured for UDMA/33 > [ 2.689104] scsi 0:0:0:0: Direct-Access ATA TOSHIBA > MK8025GA BD10 PQ: 0 ANSI: 5 > [ 2.751534] usb 1-3: New USB device found, idVendor=0af0, idProduct=7601 > [ 2.751551] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0 > [ 2.751564] usb 1-3: Product: Globetrotter HSUPA Modem > [ 2.751575] usb 1-3: Manufacturer: Option N.V. > [ 2.884588] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: > (80.0 GB/74.5 GiB) > [ 2.884858] sd 0:0:0:0: [sda] Write Protect is off > [ 2.884871] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 2.884985] sd 0:0:0:0: [sda] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > [ 2.910018] sda: sda1 sda2 < sda5 > > [ 2.911072] sd 0:0:0:0: [sda] Attached SCSI disk > [ 2.980097] usb 1-8: new high speed USB device number 4 using ehci_hcd > [ 3.117055] usb 1-8: New USB device found, idVendor=05ca, idProduct=18b2 > [ 3.117072] usb 1-8: New USB device strings: Mfr=1, Product=0, SerialNumber=0 > [ 3.117085] usb 1-8: Manufacturer: Ricoh co. Ltd. > [ 3.336535] Btrfs loaded > [ 3.356163] usb 3-2: new full speed USB device number 2 using uhci_hcd > [ 3.378090] device-mapper: uevent: version 1.0.3 > [ 3.379278] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) > initialised: dm-devel@xxxxxxxxxx > [ 3.531244] usb 3-2: New USB device found, idVendor=044e, idProduct=3017 > [ 3.531262] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > [ 3.531275] usb 3-2: Product: BCM2046 Bluetooth Device > [ 3.531285] usb 3-2: Manufacturer: Broadcom Corp > [ 3.531295] usb 3-2: SerialNumber: 00243374CCCA > [ 14.601095] device fsid 1549aee9546462b4-866da6213b35dbb7 devid 1 > transid 15479 /dev/dm-2 > [ 14.729732] PM: Starting manual resume from disk > [ 14.729742] PM: Hibernation image partition 254:1 present > [ 14.729747] PM: Looking for hibernation image. > [ 14.753104] PM: Image not found (code -22) > [ 14.753110] PM: Hibernation image not present or could not be loaded. > [ 14.760762] device fsid 1549aee9546462b4-866da6213b35dbb7 devid 1 > transid 15479 /dev/mapper/violet-root > [ 20.594468] udev[340]: starting version 164 > [ 21.473910] ACPI: AC Adapter [AC] (off-line) > [ 21.577164] ACPI: Battery Slot [BAT0] (battery present) > [ 21.577833] input: Lid Switch as > /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 > [ 21.578665] ACPI: Lid Switch [LID0] > [ 21.578923] input: Power Button as > /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 > [ 21.578942] ACPI: Power Button [PWRB] > [ 21.616170] ACPI: acpi_idle registered with cpuidle > [ 21.625882] Monitor-Mwait will be used to enter C-1 state > [ 21.626497] Monitor-Mwait will be used to enter C-2 state > [ 21.626592] Monitor-Mwait will be used to enter C-3 state > [ 21.626609] Marking TSC unstable due to TSC halts in idle > [ 21.630243] Switching to clocksource hpet > [ 22.417826] input: PC Speaker as /devices/platform/pcspkr/input/input3 > [ 22.500196] cfg80211: Calling CRDA to update world regulatory domain > [ 22.656287] Bluetooth: Core ver 2.16 > [ 22.656360] NET: Registered protocol family 31 > [ 22.656367] Bluetooth: HCI device and connection manager initialized > [ 22.656376] Bluetooth: HCI socket layer initialized > [ 22.817842] hso: drivers/net/usb/hso.c: Option Wireless > [ 22.836303] sony-laptop: Sony Programmable IO Control Driver v0.6. > [ 22.836336] sony-laptop: detected Type2 model > [ 22.836740] input: Sony Vaio Keys as > /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:17/SNY6001:00/input/input4 > [ 22.837094] input: Sony Vaio Jogdial as /devices/virtual/input/input5 > [ 22.846945] sony-laptop: device allocated minor is 58 > [ 22.850915] usbcore: registered new interface driver hso > [ 22.852525] sony-laptop: Sony Notebook Control Driver v0.6. > [ 22.930880] sony-laptop: brightness ignored, must be controlled by > ACPI video driver > [ 23.558209] input: PS/2 Generic Mouse as > /devices/platform/i8042/serio1/input/input6 > [ 23.886099] [drm] Initialized drm 1.1.0 20060810 > [ 23.963205] Bluetooth: Generic Bluetooth USB driver ver 0.6 > [ 23.966287] usbcore: registered new interface driver btusb > [ 24.372948] Linux video capture interface: v2.00 > [ 24.466834] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:18b2) > [ 24.468721] input: UVC Camera (05ca:18b2) as > /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input7 > [ 24.469007] usbcore: registered new interface driver uvcvideo > [ 24.469017] USB Video Class driver (v1.0.0) > [ 24.856067] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > [ 24.856094] ath9k 0000:02:00.0: setting latency timer to 64 > [ 24.980169] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 > [ 24.980191] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 > [ 24.980221] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, > low) -> IRQ 19 > [ 24.980337] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [ 25.221808] hda_codec: ALC262: SKU not ready 0x411111f0 > [ 25.221885] hda_codec: ALC262: BIOS auto-probing. > [ 25.222832] input: HDA Digital PCBeep as > /devices/pci0000:00/0000:00:1b.0/input/input8 > [ 25.226486] input: HDA Intel MID Headphone as > /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 > [ 25.295570] ath: EEPROM regdomain: 0x65 > [ 25.295581] ath: EEPROM indicates we should expect a direct regpair map > [ 25.295593] ath: Country alpha2 being used: 00 > [ 25.295600] ath: Regpair used: 0x65 > [ 25.357624] psb_gfx: module is from the staging directory, the > quality is unknown, you have been warned. > [ 25.405051] pvrsrvkm 0000:00:02.0: irq 41 for MSI/MSI-X > [ 25.405091] pvrsrvkm 0000:00:02.0: setting latency timer to 64 > [ 25.405865] [TTM] Zone kernel: Available graphics memory: 443562 kiB. > [ 25.405873] [TTM] Zone highmem: Available graphics memory: 1032528 kiB. > [ 25.405879] [TTM] Initializing pool allocator. > [ 25.407209] GMMADR(region 0) start: 0x80000000 (256M). > [ 25.407218] GTTADR(region 3) start: 0x94280000 (can map 256M RAM), > and actual RAM base 0x7ffc0000. > [ 25.407223] Stole memory information > [ 25.407228] base in RAM: 0x7f800000 > [ 25.407233] size: 7932K, calculated by (GTT RAM base) - > (Stolen base), seems wrong > [ 25.407240] the correct size should be: 8M(dvmt mode=3) > [ 25.411529] Set up 1983 stolen pages starting at 0x0007f800, GTT offset 0K > [ 25.413278] Set up 0 CI stolen pages starting at 0x00000000, GTT > offset 131072K > [ 25.422308] [drm] PSB GTT mem manager ready, tt_start 1983, tt_size > 30785 pages > [ 25.422452] [drm] SGX core id = 0x01130000 > [ 25.422461] [drm] SGX core rev major = 0x01, minor = 0x02 > [ 25.422469] [drm] SGX core rev maintenance = 0x01, designer = 0x00 > [ 25.442311] acpi device:04: registered as cooling_device2 > [ 25.443191] input: Video Bus as > /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input10 > [ 25.443540] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) > [ 25.444440] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). > [ 25.444452] [drm] No driver support for vblank timestamp query. > [ 25.452282] ieee80211 phy0: Selected rate control algorithm > 'ath9k_rate_control' > [ 25.454691] Registered led device: ath9k-phy0 > [ 25.454716] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xf8ea0000, irq=17 > [ 25.713840] allocated 1600x768 fb > [ 26.196265] Console: switching to colour frame buffer device 200x48 > [ 26.213085] fb0: psbfb frame buffer device > [ 26.213091] drm: registered panic notifier > [ 26.213127] ------------[ cut here ]------------ > [ 26.213145] WARNING: at drivers/video/backlight/backlight.c:314 > backlight_device_register+0xd0/0x137() > [ 26.213154] Hardware name: VGN-P21Z_W > [ 26.213159] psb-bl: invalid backlight type > [ 26.213165] Modules linked in: arc4 psb_gfx(C+) ecb > snd_hda_codec_realtek ttm snd_hda_intel drm_kms_helper ath9k > snd_hda_codec mac80211 uvcvideo videodev ath9k_common btusb snd_hwdep > drm snd_pcm ath9k_hw ath snd_seq snd_timer snd_seq_device snd i2c_isch > sony_laptop hso psmouse bluetooth soundcore lpc_sch i2c_algo_bit > cfg80211 serio_raw mfd_core pcspkr i2c_core snd_page_alloc rfkill > evdev tpm_tis tpm tpm_bios processor button battery ac video > sha256_generic aes_i586 aes_generic cbc dm_crypt dm_mod btrfs > zlib_deflate crc32c libcrc32c sd_mod crc_t10dif ata_generic pata_sch > libata uhci_hcd scsi_mod ehci_hcd usbcore thermal sky2 thermal_sys > [last unloaded: scsi_wait_scan] > [ 26.213331] Pid: 367, comm: modprobe Tainted: G C 2.6.39-rc3psb23 #1 > [ 26.213339] Call Trace: > [ 26.213355] [<c102f084>] ? warn_slowpath_common+0x6a/0x7b > [ 26.213367] [<c116e0a5>] ? backlight_device_register+0xd0/0x137 > [ 26.213379] [<c102f0fb>] ? warn_slowpath_fmt+0x28/0x2c > [ 26.213391] [<c116e0a5>] ? backlight_device_register+0xd0/0x137 > [ 26.213430] [<f8fda07a>] ? psb_backlight_init+0x31/0x140 [psb_gfx] > [ 26.213465] [<f8fdbf11>] ? psb_driver_load+0x79b/0x7d8 [psb_gfx] > [ 26.213499] [<f8cf1748>] ? drm_get_pci_dev+0x12f/0x20b [drm] > [ 26.213513] [<c114ffa0>] ? local_pci_probe+0x34/0x74 > [ 26.213525] [<c115097e>] ? pci_device_probe+0x41/0x63 > [ 26.213539] [<c11c149d>] ? driver_probe_device+0x8c/0x110 > [ 26.213551] [<c11c1561>] ? __driver_attach+0x40/0x5b > [ 26.213562] [<c11c0cf9>] ? bus_for_each_dev+0x37/0x5f > [ 26.213574] [<c11c1353>] ? driver_attach+0x11/0x13 > [ 26.213585] [<c11c1521>] ? driver_probe_device+0x110/0x110 > [ 26.213597] [<c11c1074>] ? bus_add_driver+0x87/0x1bb > [ 26.213615] [<c113bac8>] ? kset_find_obj_hinted+0x43/0x7d > [ 26.213645] [<f8ff0000>] ? 0xf8feffff > [ 26.213660] [<c11c19a0>] ? driver_register+0x7a/0xd9 > [ 26.213697] [<f8cf1847>] ? drm_pci_init+0x23/0xbf [drm] > [ 26.213721] [<f8ff0000>] ? 0xf8feffff > [ 26.213736] [<c1150b49>] ? __pci_register_driver+0x33/0x89 > [ 26.213759] [<f8ff0000>] ? 0xf8feffff > [ 26.213774] [<c1001150>] ? do_one_initcall+0x68/0x10f > [ 26.213792] [<c1058631>] ? sys_init_module+0xca5/0xe34 > [ 26.213848] [<c128c5df>] ? sysenter_do_call+0x12/0x28 > [ 26.213857] ---[ end trace 3d4fcfe20042011f ]--- > [ 26.214031] [drm] Initialized pvrsrvkm 8.1.0 2009-03-10 for > 0000:00:02.0 on minor 0 > [ 31.364782] loop: module loaded > [ 31.652710] Adding 3203068k swap on /dev/mapper/violet-swap_1. > Priority:-1 extents:1 across:3203068k > [ 33.695103] IPv4 FIB: Using LC-trie version 0.409 > [ 34.617094] fuse init (API version 7.16) > [ 37.123503] input: ACPI Virtual Keyboard Device as > /devices/virtual/input/input11 > [ 39.137344] sky2 0000:01:00.0: eth0: enabling interface > [ 39.138527] ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 39.189014] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 40.836587] apm: BIOS not found. > [ 45.516879] lp: driver loaded but no devices found > [ 45.538165] ppdev: user-space parallel port driver > [ 77.847463] wlan0: authenticate with 00:25:9c:24:2c:0e (try 1) > [ 77.864125] wlan0: authenticated > [ 77.864200] wlan0: associate with 00:25:9c:24:2c:0e (try 1) > [ 77.869050] wlan0: RX AssocResp from 00:25:9c:24:2c:0e (capab=0x411 > status=0 aid=2) > [ 77.869063] wlan0: associated > [ 77.869831] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > > -------- Xorg.log > X.Org X Server 1.7.7 > Release Date: 2010-05-04 > X Protocol Version 11, Revision 0 > Build Operating System: Linux 2.6.32.29-dsa-ia32 i686 Debian > Current Operating System: Linux violet 2.6.39-rc3psb23 #1 SMP Tue Apr > 12 19:26:35 CEST 2011 i686 > Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.39-rc3psb23 > root=/dev/mapper/violet-root ro quiet > Build Date: 19 February 2011 02:37:36PM > xorg-server 2:1.7.7-13 (Cyril Brulebois <kibi@xxxxxxxxxx>) > Current version of pixman: 0.16.4 > Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 13 21:35:54 2011 > (==) Using system config directory "/usr/share/X11/xorg.conf.d" > (==) No Layout section. Using the first Screen section. > (==) No screen section available. Using defaults. > (**) |-->Screen "Default Screen Section" (0) > (**) | |-->Monitor "<default monitor>" > (==) No monitor specified for screen "Default Screen Section". > Using a default monitor configuration. > (==) Automatically adding devices > (==) Automatically enabling devices > (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. > Entry deleted from font path. > (==) FontPath set to: > /usr/share/fonts/X11/misc, > /usr/share/fonts/X11/100dpi/:unscaled, > /usr/share/fonts/X11/75dpi/:unscaled, > /usr/share/fonts/X11/Type1, > /usr/share/fonts/X11/100dpi, > /usr/share/fonts/X11/75dpi, > /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, > built-ins > (==) ModulePath set to "/usr/lib/xorg/modules" > (II) The server relies on udev to provide the list of input devices. > If no devices become available, reconfigure udev or disable AutoAddDevices. > (II) Loader magic: 0x81ecca0 > (II) Module ABI versions: > X.Org ANSI C Emulation: 0.4 > X.Org Video Driver: 6.0 > X.Org XInput driver : 7.0 > X.Org Server Extension : 2.0 > (++) using VT number 7 > > (--) PCI:*(0:0:2:0) 8086:8108:104d:9039 Intel Corporation System > Controller Hub (SCH Poulsbo) Graphics Controller rev 6, Mem @ > 0x94200000/524288, 0x80000000/268435456, 0x94280000/262144, I/O @ > 0x00006070/8 > (II) Open ACPI successful (/var/run/acpid.socket) > (II) LoadModule: "extmod" > (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so > (II) Module extmod: vendor="X.Org Foundation" > compiled for 1.7.7, module version = 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension SELinux > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) Loading extension X-Resource > (II) LoadModule: "dbe" > (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so > (II) Module dbe: vendor="X.Org Foundation" > compiled for 1.7.7, module version = 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "glx" > (II) Loading /usr/lib/xorg/modules/extensions/libglx.so > (II) Module glx: vendor="X.Org Foundation" > compiled for 1.7.7, module version = 1.0.0 > ABI class: X.Org Server Extension, version 2.0 > (==) AIGLX enabled > (II) Loading extension GLX > (II) LoadModule: "record" > (II) Loading /usr/lib/xorg/modules/extensions/librecord.so > (II) Module record: vendor="X.Org Foundation" > compiled for 1.7.7, module version = 1.13.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension RECORD > (II) LoadModule: "dri" > (II) Loading /usr/lib/xorg/modules/extensions/libdri.so > (II) Module dri: vendor="X.Org Foundation" > compiled for 1.7.7, module version = 1.0.0 > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension XFree86-DRI > (II) LoadModule: "dri2" > (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so > (II) Module dri2: vendor="X.Org Foundation" > compiled for 1.7.7, module version = 1.1.0 > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension DRI2 > (==) Matched vesa as autoconfigured driver 0 > (==) Matched fbdev as autoconfigured driver 1 > (==) Assigned the driver to the xf86ConfigLayout > (II) LoadModule: "vesa" > (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so > (II) Module vesa: vendor="X.Org Foundation" > compiled for 1.7.7, module version = 2.3.0 > Module class: X.Org Video Driver > ABI class: X.Org Video Driver, version 6.0 > (II) LoadModule: "fbdev" > (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so > (II) Module fbdev: vendor="X.Org Foundation" > compiled for 1.7.6.901, module version = 0.4.2 > ABI class: X.Org Video Driver, version 6.0 > (II) VESA: driver for VESA chipsets: vesa > (II) FBDEV: driver for framebuffer: fbdev > (II) Primary Device is: PCI 00@00:02:0 > (EE) VESA: Kernel modesetting driver in use, refusing to load > (WW) Falling back to old probe method for vesa > (II) Loading sub module "fbdevhw" > (II) LoadModule: "fbdevhw" > (II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so > (II) Module fbdevhw: vendor="X.Org Foundation" > compiled for 1.7.7, module version = 0.0.2 > ABI class: X.Org Video Driver, version 6.0 > (**) FBDEV(0): claimed PCI slot 0@0:2:0 > (II) FBDEV(0): using default device > (II) FBDEV(0): Creating default Display subsection in Screen section > "Default Screen Section" for depth/fbbpp 24/32 > (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32 > (==) FBDEV(0): RGB weight 888 > (==) FBDEV(0): Default visual is TrueColor > (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0) > (II) FBDEV(0): hardware: psbfb (video memory: 4800kB) > (II) FBDEV(0): checking modes against framebuffer device... > (II) FBDEV(0): checking modes against monitor... > (--) FBDEV(0): Virtual size is 1600x768 (pitch 1600) > (**) FBDEV(0): Built-in mode "current" > (==) FBDEV(0): DPI set to (96, 96) > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Loading /usr/lib/xorg/modules/libfb.so > (II) Module fb: vendor="X.Org Foundation" > compiled for 1.7.7, module version = 1.0.0 > ABI class: X.Org ANSI C Emulation, version 0.4 > (**) FBDEV(0): using shadow framebuffer > (II) Loading sub module "shadow" > (II) LoadModule: "shadow" > (II) Loading /usr/lib/xorg/modules/libshadow.so > (II) Module shadow: vendor="X.Org Foundation" > compiled for 1.7.7, module version = 1.1.0 > ABI class: X.Org ANSI C Emulation, version 0.4 > (==) Depth 24 pixmap format is 32 bpp > (==) FBDEV(0): Backing store disabled > (==) FBDEV(0): DPMS enabled > (==) RandR enabled > (II) Initializing built-in extension Generic Event Extension > (II) Initializing built-in extension SHAPE > (II) Initializing built-in extension MIT-SHM > (II) Initializing built-in extension XInputExtension > (II) Initializing built-in extension XTEST > (II) Initializing built-in extension BIG-REQUESTS > (II) Initializing built-in extension SYNC > (II) Initializing built-in extension XKEYBOARD > (II) Initializing built-in extension XC-MISC > (II) Initializing built-in extension SECURITY > (II) Initializing built-in extension XINERAMA > (II) Initializing built-in extension XFIXES > (II) Initializing built-in extension RENDER > (II) Initializing built-in extension RANDR > (II) Initializing built-in extension COMPOSITE > (II) Initializing built-in extension DAMAGE > SELinux: Disabled on system, not enabling in X server > (II) AIGLX: Screen 0 is not DRI2 capable > (II) AIGLX: Screen 0 is not DRI capable > (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so > (II) GLX: Initialized DRISWRAST GL provider for screen 0 > (II) config/udev: Adding input device Video Bus (/dev/input/event10) > (**) Video Bus: Applying InputClass "evdev keyboard catchall" > (II) LoadModule: "evdev" > (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so > (II) Module evdev: vendor="X.Org Foundation" > compiled for 1.7.6.901, module version = 2.3.2 > Module class: X.Org XInput Driver > ABI class: X.Org XInput driver, version 7.0 > (**) Video Bus: always reports core events > (**) Video Bus: Device: "/dev/input/event10" > (II) Video Bus: Found keys > (II) Video Bus: Configuring as keyboard > (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) > (**) Option "xkb_rules" "evdev" > (**) Option "xkb_model" "pc105" > (**) Option "xkb_layout" "us" > (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event4) > (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall" > (**) Sony Vaio Keys: always reports core events > (**) Sony Vaio Keys: Device: "/dev/input/event4" > (II) Sony Vaio Keys: Found keys > (II) Sony Vaio Keys: Configuring as keyboard > (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD) > (**) Option "xkb_rules" "evdev" > (**) Option "xkb_model" "pc105" > (**) Option "xkb_layout" "us" > (II) config/udev: Adding input device Power Button (/dev/input/event2) > (**) Power Button: Applying InputClass "evdev keyboard catchall" > (**) Power Button: always reports core events > (**) Power Button: Device: "/dev/input/event2" > (II) Power Button: Found keys > (II) Power Button: Configuring as keyboard > (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) > (**) Option "xkb_rules" "evdev" > (**) Option "xkb_model" "pc105" > (**) Option "xkb_layout" "us" > (II) config/udev: Adding input device Lid Switch (/dev/input/event1) > (II) No input driver/identifier specified (ignoring) > (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8) > (II) No input driver/identifier specified (ignoring) > (II) config/udev: Adding input device HDA Intel MID Headphone > (/dev/input/event9) > (II) No input driver/identifier specified (ignoring) > (II) config/udev: Adding input device UVC Camera (05ca:18b2) (/dev/input/event7) > (**) UVC Camera (05ca:18b2): Applying InputClass "evdev keyboard catchall" > (**) UVC Camera (05ca:18b2): always reports core events > (**) UVC Camera (05ca:18b2): Device: "/dev/input/event7" > (II) UVC Camera (05ca:18b2): Found keys > (II) UVC Camera (05ca:18b2): Configuring as keyboard > (II) XINPUT: Adding extended input device "UVC Camera (05ca:18b2)" > (type: KEYBOARD) > (**) Option "xkb_rules" "evdev" > (**) Option "xkb_model" "pc105" > (**) Option "xkb_layout" "us" > (II) config/udev: Adding input device AT Translated Set 2 keyboard > (/dev/input/event0) > (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" > (**) AT Translated Set 2 keyboard: always reports core events > (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0" > (II) AT Translated Set 2 keyboard: Found keys > (II) AT Translated Set 2 keyboard: Configuring as keyboard > (II) XINPUT: Adding extended input device "AT Translated Set 2 > keyboard" (type: KEYBOARD) > (**) Option "xkb_rules" "evdev" > (**) Option "xkb_model" "pc105" > (**) Option "xkb_layout" "us" > (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event6) > (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall" > (**) PS/2 Generic Mouse: always reports core events > (**) PS/2 Generic Mouse: Device: "/dev/input/event6" > (II) PS/2 Generic Mouse: Found 3 mouse buttons > (II) PS/2 Generic Mouse: Found relative axes > (II) PS/2 Generic Mouse: Found x and y relative axes > (II) PS/2 Generic Mouse: Configuring as mouse > (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5 > (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: > 10, EmulateWheelTimeout: 200 > (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE) > (II) PS/2 Generic Mouse: initialized for relative axes. > (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1) > (II) No input driver/identifier specified (ignoring) > (II) config/udev: Adding input device PC Speaker (/dev/input/event3) > (II) No input driver/identifier specified (ignoring) > (II) config/udev: Adding input device ACPI Virtual Keyboard Device > (/dev/input/event11) > (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall" > (**) ACPI Virtual Keyboard Device: always reports core events > (**) ACPI Virtual Keyboard Device: Device: "/dev/input/event11" > (II) ACPI Virtual Keyboard Device: Found keys > (II) ACPI Virtual Keyboard Device: Configuring as keyboard > (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard > Device" (type: KEYBOARD) > (**) Option "xkb_rules" "evdev" > (**) Option "xkb_model" "pc105" > (**) Option "xkb_layout" "us" > (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event5) > (II) No input driver/identifier specified (ignoring) > (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse0) > (II) No input driver/identifier specified (ignoring) > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
