Re: [PATCH v4 18/21] mfd: hi6421-spmi-pmic: move driver from staging

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jan 19, 2021 at 05:10:44PM +0100, Mauro Carvalho Chehab wrote:
> This driver is ready for mainstream. So, move it out of staging.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
> ---
>  .../mfd/hisilicon,hi6421-spmi-pmic.yaml       | 135 +++++++++
>  MAINTAINERS                                   |   7 +
>  drivers/mfd/Kconfig                           |  15 +
>  drivers/mfd/Makefile                          |   1 +
>  drivers/mfd/hi6421-spmi-pmic.c                | 281 ++++++++++++++++++
>  drivers/staging/hikey9xx/Kconfig              |  16 -
>  drivers/staging/hikey9xx/Makefile             |   1 -
>  drivers/staging/hikey9xx/hi6421-spmi-pmic.c   | 281 ------------------
>  .../hikey9xx/hisilicon,hi6421-spmi-pmic.yaml  | 135 ---------
>  9 files changed, 439 insertions(+), 433 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
>  create mode 100644 drivers/mfd/hi6421-spmi-pmic.c
>  delete mode 100644 drivers/staging/hikey9xx/hi6421-spmi-pmic.c
>  delete mode 100644 drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
> new file mode 100644
> index 000000000000..3b23ad56b31a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
> @@ -0,0 +1,135 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/hisilicon,hi6421-spmi-pmic.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: HiSilicon 6421v600 SPMI PMIC
> +
> +maintainers:
> +  - Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
> +
> +description: |
> +  HiSilicon 6421v600 should be connected inside a MIPI System Power Management
> +  (SPMI) bus. It provides interrupts and power supply.
> +
> +  The GPIO and interrupt settings are represented as part of the top-level PMIC
> +  node.
> +
> +  The SPMI controller part is provided by
> +  drivers/staging/hikey9xx/hisilicon,hisi-spmi-controller.yaml.
> +
> +properties:
> +  $nodename:
> +    pattern: "pmic@[0-9a-f]"
> +
> +  compatible:
> +    const: hisilicon,hi6421v600-spmi

'-spmi' is redundant.

> +
> +  reg:
> +    maxItems: 1
> +
> +  '#interrupt-cells':
> +    const: 2
> +
> +  interrupt-controller:
> +    description:
> +      Identify that the PMIC is capable of behaving as an interrupt controller.

Don't need a description here.

Don't you need 'interrupts' here to get the interrupts to the host?

> +
> +  gpios:
> +    maxItems: 1

GPIO for what? It's preferred to have a named gpio.

> +
> +  regulators:
> +    type: object
> +
> +    properties:
> +      '#address-cells':
> +        const: 1
> +
> +      '#size-cells':
> +        const: 0
> +
> +    patternProperties:
> +      '^ldo[0-9]+@[0-9a-f]$':
> +        type: object
> +
> +        $ref: "/schemas/regulator/regulator.yaml#"

       additionalProperties: false

Which will give you errors in the example.

> +
> +required:
> +  - compatible
> +  - reg
> +  - regulators
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    /* pmic properties */
> +
> +    pmic: pmic@0 {
> +      compatible = "hisilicon,hi6421-spmi";
> +      reg = <0 0>;
> +
> +      #interrupt-cells = <2>;
> +      interrupt-controller;
> +      gpios = <&gpio28 0 0>;
> +
> +      regulators {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        ldo3: LDO3 {

LDO3: ldo3  {

is preferred and closer to what you defined above.

> +          regulator-name = "ldo3";
> +          regulator-min-microvolt = <1500000>;
> +          regulator-max-microvolt = <2000000>;
> +          regulator-boot-on;
> +        };
> +
> +        ldo4: LDO4 {
> +          regulator-name = "ldo4";
> +          regulator-min-microvolt = <1725000>;
> +          regulator-max-microvolt = <1900000>;
> +          regulator-boot-on;
> +        };
> +
> +        ldo9: LDO9 {
> +          regulator-name = "ldo9";
> +          regulator-min-microvolt = <1750000>;
> +          regulator-max-microvolt = <3300000>;
> +          regulator-boot-on;
> +        };
> +
> +        ldo15: LDO15 {
> +          regulator-name = "ldo15";
> +          regulator-min-microvolt = <1800000>;
> +          regulator-max-microvolt = <3000000>;
> +          regulator-always-on;
> +        };
> +
> +        ldo16: LDO16 {
> +          regulator-name = "ldo16";
> +          regulator-min-microvolt = <1800000>;
> +          regulator-max-microvolt = <3000000>;
> +          regulator-boot-on;
> +        };
> +
> +        ldo17: LDO17 {
> +          regulator-name = "ldo17";
> +          regulator-min-microvolt = <2500000>;
> +          regulator-max-microvolt = <3300000>;
> +        };
> +
> +        ldo33: LDO33 {
> +          regulator-name = "ldo33";
> +          regulator-min-microvolt = <2500000>;
> +          regulator-max-microvolt = <3300000>;
> +          regulator-boot-on;
> +        };
> +
> +        ldo34: LDO34 {
> +          regulator-name = "ldo34";
> +          regulator-min-microvolt = <2600000>;
> +          regulator-max-microvolt = <3300000>;
> +        };
> +      };
> +    };
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux