Re: [PATCH v10] staging: fbtft: add tearing signal detect

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 28 Jan 2021 12:15:28 +0100
Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:

> Hi Carlis,
> 
> On Thu, Jan 28, 2021 at 12:03 PM carlis <zhangxuezhi3@xxxxxxxxx>
> wrote:
> > On Thu, 28 Jan 2021 10:42:54 +0100
> > Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:  
> > > On Thu, Jan 28, 2021 at 7:53 AM Kari Argillander
> > > <kari.argillander@xxxxxxxxx> wrote:  
> > > > On Thu, Jan 28, 2021 at 09:42:58AM +0800, carlis wrote:  
> > > > > On Thu, 28 Jan 2021 00:32:22 +0200
> > > > > Kari Argillander <kari.argillander@xxxxxxxxx> wrote:  
> > > > > > >  #include "fbtft.h"
> > > > > > >
> > > > > > >  #define DRVNAME "fb_st7789v"
> > > > > > > @@ -66,6 +69,32 @@ enum st7789v_command {
> > > > > > >  #define MADCTL_MX BIT(6) /* bitmask for column address
> > > > > > > order */ #define MADCTL_MY BIT(7) /* bitmask for page
> > > > > > > address order */
> > > > > > >
> > > > > > > +#define SPI_PANEL_TE_TIMEOUT     400 /* msecs */
> > > > > > > +static struct mutex te_mutex;/* mutex for set te gpio irq
> > > > > > > status */  
> > > > > >
> > > > > > Space after ;  
> > > > > hi, i have fix it in the patch v11  
> > > > > >  
> > > >
> > > > Yeah sorry. I accidentally review wrong patch. But mostly stuff
> > > > are still relevant.
> > > >  
> > > > > > > @@ -82,6 +111,33 @@ enum st7789v_command {
> > > > > > >   */
> > > > > > >  static int init_display(struct fbtft_par *par)
> > > > > > >  {
> > > > > > > + int rc;
> > > > > > > + struct device *dev = par->info->device;
> > > > > > > +
> > > > > > > + par->gpio.te = devm_gpiod_get_index_optional(dev, "te",
> > > > > > > 0, GPIOD_IN);
> > > > > > > + if (IS_ERR(par->gpio.te)) {
> > > > > > > +         rc = PTR_ERR(par->gpio.te);
> > > > > > > +         dev_err(par->info->device, "Failed to request te
> > > > > > > gpio: %d\n", rc);
> > > > > > > +         return rc;
> > > > > > > + }  
> > > > > >
> > > > > > You request with optinal and you still want to error out? We
> > > > > > could just continue and not care about that error. User
> > > > > > will be happier if device still works somehow.  
> > >
> > > devm_gpiod_get_index_optional() returns NULL, not an error, if the
> > > GPIO is not found.  So if IS_ERR() is the right check.
> > >
> > > And checks for -EPROBE_DEFER can be handled automatically
> > > by using dev_err_probe() instead of dev_err().
> > >  
> > hi, i fix it like below!?
> >         par->gpio.te = devm_gpiod_get_index_optional(dev, "te", 0,
> >         GPIOD_IN); if (IS_ERR(par->gpio.te)) {
> >                 rc = PTR_ERR(par->gpio.te);
> >                 dev_err_probe(par->info->device, rc, "Failed to
> > request te gpio\n"); return rc;
> >         }
> >         if (par->gpio.te) {
> >                 init_completion(&spi_panel_te);
> >                 rc = devm_request_irq(dev,
> >                                       gpiod_to_irq(par->gpio.te),
> >                                      spi_panel_te_handler,
> >         IRQF_TRIGGER_RISING, "TE_GPIO", par);
> >                 if (rc) {
> >                         dev_err(par->info->device, "TE request_irq
> >         failed.\n"); return rc;  
> 
> dev_err_probe()
> 
> >                 }
> >
> >                 disable_irq_nosync(gpiod_to_irq(par->gpio.te));
> >         } else {
> >                 dev_info(par->info->device, "%s:%d, TE gpio not
> >                 specified\n", __func__, __LINE__);
> >         }  
> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 

hi,i will fix it like below:


	par->gpio.te = devm_gpiod_get_index_optional(dev, "te", 0,
	GPIOD_IN); if (IS_ERR(par->gpio.te))
		return dev_err_probe(par->info->device,
	PTR_ERR(par->gpio.te), "Failed to request te gpio\n");

	if (par->gpio.te) {
		init_completion(&spi_panel_te);
		rc = devm_request_irq(dev,
				      gpiod_to_irq(par->gpio.te),
				     spi_panel_te_handler,
	IRQF_TRIGGER_RISING, "TE_GPIO", par);
		if (IS_ERR(rc))
			return dev_err_probe(par->info->device,
	PTR_ERR(rc), "TE request_irq failed.\n");

		disable_irq_nosync(gpiod_to_irq(par->gpio.te));
	} else {
		dev_info(par->info->device, "%s:%d, TE gpio not
		specified\n", __func__, __LINE__);
	}


regards,
zhangxuezhi
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux