2011/4/13 Greg KH <greg@xxxxxxxxx>:
>> diff --git a/drivers/axi/axi_pci_bridge.c b/drivers/axi/axi_pci_bridge.c
>> new file mode 100644
>> index 0000000..17e882c
>> --- /dev/null
>> +++ b/drivers/axi/axi_pci_bridge.c
>> @@ -0,0 +1,33 @@
>> +/*
>> + * AXI PCI bridge module
>> + *
>> + * Licensed under the GNU/GPL. See COPYING for details.
>> + */
>> +
>> +#include "axi_private.h"
>> +
>> +#include <linux/axi/axi.h>
>> +#include <linux/pci.h>
>> +
>> +static DEFINE_PCI_DEVICE_TABLE(axi_pci_bridge_tbl) = {
>> + Â Â { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) },
>> + Â Â { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) },
>> + Â Â { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
>> + Â Â { 0, },
>> +};
>> +MODULE_DEVICE_TABLE(pci, axi_pci_bridge_tbl);
>> +
>> +static struct pci_driver axi_pci_bridge_driver = {
>> + Â Â .name = "axi-pci-bridge",
>> + Â Â .id_table = axi_pci_bridge_tbl,
>> +};
>> +
>> +int __init axi_pci_bridge_init(void)
>> +{
>> + Â Â return axi_host_pci_register(&axi_pci_bridge_driver);
>> +}
>> +
>> +void __exit axi_pci_bridge_exit(void)
>> +{
>> + Â Â axi_host_pci_unregister(&axi_pci_bridge_driver);
>> +}
>
> You register a pci driver that does nothing? ÂThat's not right, you need
> to then base your axi bus off of that pci device, so it is hooked up
> correctly in the /sys/devices/ tree. ÂOtherwise you are somewhere up in
> the virtual location for your axi bus, right?
Please take a look at:
driver->probe = axi_host_pci_probe;
driver->remove = axi_host_pci_remove;
return pci_register_driver(driver);
>> +bool axi_core_is_enabled(struct axi_device *core)
>> +{
>> + Â Â if ((axi_aread32(core, AXI_IOCTL) & (AXI_IOCTL_CLK | AXI_IOCTL_FGC))
>> + Â Â Â Â != AXI_IOCTL_CLK)
>> + Â Â Â Â Â Â return false;
>> + Â Â if (axi_aread32(core, AXI_RESET_CTL) & AXI_RESET_CTL_RESET)
>> + Â Â Â Â Â Â return false;
>> + Â Â return true;
>> +}
>> +EXPORT_SYMBOL(axi_core_is_enabled);
>
> EXPORT_SYMBOL_GPL()?
>
> What module uses this? ÂAnd why would it care?
>
>> +EXPORT_SYMBOL(axi_core_enable);
>
> EXPORT_SYMBOL_GPL()?
>
> Same goes for your other exports, just want you to be sure here.
Hm, I'm not sure. Using EXPORT_SYMBOL_GPL will forbid closed source
drivers from using our bus driver, right? I'm don't have preferences
on this, if you prefer us to force GPL, I can.
>> +u32 xaxi_chipco_gpio_control(struct axi_drv_cc *cc, u32 mask, u32 value)
>> +{
>> + Â Â return axi_cc_write32_masked(cc, AXI_CC_GPIOCTL, mask, value);
>> +}
>> +EXPORT_SYMBOL(xaxi_chipco_gpio_control);
>
> "xaxi"? ÂShouldn't that be consistant with the other exports and start
> with "axi"?
Left from old tests/rewrites/splitting. Thanks.
>> +static u8 axi_host_pci_read8(struct axi_device *core, u16 offset)
>> +{
>> + Â Â if (unlikely(core->bus->mapped_core != core))
>
> Are you sure about the use of unlikely in this, and other functions?
> The compiler almost always does a better job than we do for these types
> of calls, just let it do it's job.
>
>> + Â Â Â Â Â Â axi_host_pci_switch_core(core);
>> + Â Â return ioread8(core->bus->mmio + offset);
>
> I think because of that unlikely, you just slowed down all pci devices,
> right? ÂThat's not very nice :)
Hm, my logic suggests it is alright, but please consider this once
more with me ;)
For the most of the time mapped_core (active core) do not change. We
perform few hundreds of operations on one core in a row. This way
mapped_core points to passed core for most of the time. Condition
(mapped_core != core) is unlikely to happen.
Is there anything wrong in my logic?
--
RafaÅ
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
