These Socs have 1-3 banks of 8-32 gpios. Rather then setting the muxing of each
pin individually, these socs have mux groups that when set will effect 1-N pins.
Pin groups have a 2, 4 or 8 different muxes.
Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
---
drivers/pinctrl/Kconfig | 1 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/ralink/Kconfig | 14 ++++++++++++++
.../mt7621-pinctrl => pinctrl/ralink}/Makefile | 2 --
.../ralink}/pinctrl-rt2880.c | 4 ++--
drivers/staging/Kconfig | 2 --
drivers/staging/Makefile | 1 -
drivers/staging/mt7621-pinctrl/Kconfig | 6 ------
drivers/staging/mt7621-pinctrl/TODO | 6 ------
9 files changed, 18 insertions(+), 19 deletions(-)
create mode 100644 drivers/pinctrl/ralink/Kconfig
rename drivers/{staging/mt7621-pinctrl => pinctrl/ralink}/Makefile (66%)
rename drivers/{staging/mt7621-pinctrl => pinctrl/ralink}/pinctrl-rt2880.c (99%)
delete mode 100644 drivers/staging/mt7621-pinctrl/Kconfig
delete mode 100644 drivers/staging/mt7621-pinctrl/TODO
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 815095326e2d..453acce3d0c3 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -385,6 +385,7 @@ source "drivers/pinctrl/nomadik/Kconfig"
source "drivers/pinctrl/nuvoton/Kconfig"
source "drivers/pinctrl/pxa/Kconfig"
source "drivers/pinctrl/qcom/Kconfig"
+source "drivers/pinctrl/ralink/Kconfig"
source "drivers/pinctrl/renesas/Kconfig"
source "drivers/pinctrl/samsung/Kconfig"
source "drivers/pinctrl/spear/Kconfig"
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index f53933b2ff02..3cdb6529db95 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -59,6 +59,7 @@ obj-y += nomadik/
obj-$(CONFIG_ARCH_NPCM7XX) += nuvoton/
obj-$(CONFIG_PINCTRL_PXA) += pxa/
obj-$(CONFIG_ARCH_QCOM) += qcom/
+obj-$(CONFIG_PINCTRL_RALINK) += ralink/
obj-$(CONFIG_PINCTRL_RENESAS) += renesas/
obj-$(CONFIG_PINCTRL_SAMSUNG) += samsung/
obj-$(CONFIG_PINCTRL_SPEAR) += spear/
diff --git a/drivers/pinctrl/ralink/Kconfig b/drivers/pinctrl/ralink/Kconfig
new file mode 100644
index 000000000000..8c5f6341477f
--- /dev/null
+++ b/drivers/pinctrl/ralink/Kconfig
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "Ralink pinctrl drivers"
+ depends on RALINK
+
+config PINCTRL_RALINK
+ bool "Ralink pin control support"
+ default y if RALINK
+
+config PINCTRL_RT2880
+ bool "RT2880 pinctrl driver for RALINK/Mediatek SOCs"
+ select PINMUX
+ select GENERIC_PINCONF
+
+endmenu
diff --git a/drivers/staging/mt7621-pinctrl/Makefile b/drivers/pinctrl/ralink/Makefile
similarity index 66%
rename from drivers/staging/mt7621-pinctrl/Makefile
rename to drivers/pinctrl/ralink/Makefile
index 49445f40c3cd..242554298d07 100644
--- a/drivers/staging/mt7621-pinctrl/Makefile
+++ b/drivers/pinctrl/ralink/Makefile
@@ -1,4 +1,2 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_PINCTRL_RT2880) += pinctrl-rt2880.o
-
-ccflags-y += -I$(srctree)/drivers/pinctrl
diff --git a/drivers/staging/mt7621-pinctrl/pinctrl-rt2880.c b/drivers/pinctrl/ralink/pinctrl-rt2880.c
similarity index 99%
rename from drivers/staging/mt7621-pinctrl/pinctrl-rt2880.c
rename to drivers/pinctrl/ralink/pinctrl-rt2880.c
index e61dbe186bc9..42b1c6cecb57 100644
--- a/drivers/staging/mt7621-pinctrl/pinctrl-rt2880.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt2880.c
@@ -20,8 +20,8 @@
#include <asm/mach-ralink/pinmux.h>
#include <asm/mach-ralink/mt7620.h>
-#include "core.h"
-#include "pinctrl-utils.h"
+#include "../core.h"
+#include "../pinctrl-utils.h"
#define SYSC_REG_GPIO_MODE 0x60
#define SYSC_REG_GPIO_MODE2 0x64
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 9b7cb7c5766a..c42708e60afc 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -94,8 +94,6 @@ source "drivers/staging/mt7621-pci/Kconfig"
source "drivers/staging/mt7621-pci-phy/Kconfig"
-source "drivers/staging/mt7621-pinctrl/Kconfig"
-
source "drivers/staging/mt7621-dma/Kconfig"
source "drivers/staging/ralink-gdma/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 38226737c9f3..ebcc646d7b51 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -37,7 +37,6 @@ obj-$(CONFIG_BCM2835_VCHIQ) += vc04_services/
obj-$(CONFIG_PI433) += pi433/
obj-$(CONFIG_PCI_MT7621) += mt7621-pci/
obj-$(CONFIG_PCI_MT7621_PHY) += mt7621-pci-phy/
-obj-$(CONFIG_PINCTRL_RT2880) += mt7621-pinctrl/
obj-$(CONFIG_SOC_MT7621) += mt7621-dma/
obj-$(CONFIG_DMA_RALINK) += ralink-gdma/
obj-$(CONFIG_SOC_MT7621) += mt7621-dts/
diff --git a/drivers/staging/mt7621-pinctrl/Kconfig b/drivers/staging/mt7621-pinctrl/Kconfig
deleted file mode 100644
index f42974026480..000000000000
--- a/drivers/staging/mt7621-pinctrl/Kconfig
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-config PINCTRL_RT2880
- bool "RT2800 pinctrl driver for RALINK/Mediatek SOCs"
- depends on RALINK
- select PINMUX
- select GENERIC_PINCONF
diff --git a/drivers/staging/mt7621-pinctrl/TODO b/drivers/staging/mt7621-pinctrl/TODO
deleted file mode 100644
index b2c235a16d5c..000000000000
--- a/drivers/staging/mt7621-pinctrl/TODO
+++ /dev/null
@@ -1,6 +0,0 @@
-
-- general code review and cleanup
-- should probably be always selected by 'config RALINK'
-- ensure device-tree requirements are documented
-
-Cc: NeilBrown <neil@xxxxxxxxxx>
--
2.25.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
