From: Yu Chen <chenyu56@xxxxxxxxxx>
There are some problems at the initialization part of this phy.
Solve them.
Signed-off-by: Yu Chen <chenyu56@xxxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
---
drivers/staging/hikey9xx/phy-hi3670-usb3.c | 70 ++++++++++------------
1 file changed, 32 insertions(+), 38 deletions(-)
diff --git a/drivers/staging/hikey9xx/phy-hi3670-usb3.c b/drivers/staging/hikey9xx/phy-hi3670-usb3.c
index 4e04ac97728d..1d4caf7a2aaf 100644
--- a/drivers/staging/hikey9xx/phy-hi3670-usb3.c
+++ b/drivers/staging/hikey9xx/phy-hi3670-usb3.c
@@ -63,6 +63,7 @@
#define TCA_INTR_STS (0x208)
#define TCA_GCFG (0x210)
#define TCA_TCPC (0x214)
+#define TCA_SYSMODE_CFG (0x218)
#define TCA_VBUS_CTRL (0x240)
#define CTRL0_USB3_VBUSVLD BIT(7)
@@ -109,12 +110,16 @@
#define CLK_RST_SUSPEND_CLK_EN BIT(0)
#define GCFG_ROLE_HSTDEV BIT(4)
+#define GCFG_OP_MODE (3 << 0)
+#define GCFG_OP_MODE_CTRL_SYNC_MODE BIT(0)
#define TCPC_VALID BIT(4)
#define TCPC_LOW_POWER_EN BIT(3)
#define TCPC_MUX_CONTROL_MASK (3 << 0)
#define TCPC_MUX_CONTROL_USB31 (1 << 0)
+#define SYSMODE_CFG_TYPEC_DISABLE BIT(3)
+
#define VBUS_CTRL_POWERPRESENT_OVERRD (3 << 2)
#define VBUS_CTRL_VBUSVALID_OVERRD (3 << 0)
@@ -363,6 +368,11 @@ static int kirin970_config_phy_clock(struct kirin970_priv *priv)
if (ret)
goto out;
+ /* enable usb_tcxo_en */
+ ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3,
+ USB_TCXO_EN |
+ (USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START));
+
/* select usbphy clk from abb */
mask = SC_CLK_USB3PHY_3MUX1_SEL;
ret = regmap_update_bits(priv->pctrl,
@@ -437,7 +447,13 @@ static int kirin970_config_tca(struct kirin970_priv *priv)
goto out;
ret = regmap_update_bits(priv->usb31misc, TCA_GCFG,
- GCFG_ROLE_HSTDEV, GCFG_ROLE_HSTDEV);
+ GCFG_ROLE_HSTDEV | GCFG_OP_MODE,
+ GCFG_ROLE_HSTDEV | GCFG_OP_MODE_CTRL_SYNC_MODE);
+ if (ret)
+ goto out;
+
+ ret = regmap_update_bits(priv->usb31misc, TCA_SYSMODE_CFG,
+ SYSMODE_CFG_TYPEC_DISABLE, 0);
if (ret)
goto out;
@@ -461,18 +477,15 @@ static int kirin970_config_tca(struct kirin970_priv *priv)
return ret;
}
-static int kirin970_phy_exit(struct phy *phy);
-
static int kirin970_phy_init(struct phy *phy)
{
struct kirin970_priv *priv = phy_get_drvdata(phy);
u32 val;
int ret;
- kirin970_phy_exit(phy);
- dev_info(priv->dev, "%s in\n", __func__);
/* assert controller */
- val = CFGA0_VAUX_RESET | CFGA0_USB31C_RESET;
+ val = CFGA0_VAUX_RESET | CFGA0_USB31C_RESET |
+ CFGA0_USB3PHY_RESET | CFGA0_USB2PHY_POR;
ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, 0);
if (ret)
goto out;
@@ -493,6 +506,14 @@ static int kirin970_phy_init(struct phy *phy)
if (ret)
goto out;
+ /* Deassert phy */
+ val = CFGA0_USB3PHY_RESET | CFGA0_USB2PHY_POR;
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, val);
+ if (ret)
+ goto out;
+
+ udelay(100);
+
/* Tell the PHY power is stable */
val = CFG54_USB3_PHY0_ANA_PWR_EN | CFG54_PHY0_PCS_PWR_STABLE |
CFG54_PHY0_PMA_PWR_STABLE;
@@ -512,14 +533,6 @@ static int kirin970_phy_init(struct phy *phy)
if (ret)
goto out;
- /* Deassert phy */
- val = CFGA0_USB3PHY_RESET | CFGA0_USB2PHY_POR;
- ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, val);
- if (ret)
- goto out;
-
- udelay(100);
-
/* Deassert controller */
val = CFGA0_VAUX_RESET | CFGA0_USB31C_RESET;
ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, val);
@@ -545,29 +558,6 @@ static int kirin970_phy_init(struct phy *phy)
if (ret)
goto out;
- {
- ret = regmap_read(priv->peri_crg, 0x4c,
- &val);
- if (!ret)
- dev_info(priv->dev, "peri_crg 0x4c %x\n", val);
- ret = regmap_read(priv->peri_crg, 0x404,
- &val);
- if (!ret)
- dev_info(priv->dev, "peri_crg 0x404 %x\n", val);
- ret = regmap_read(priv->peri_crg, 0xc,
- &val);
- if (!ret)
- dev_info(priv->dev, "peri_crg 0xc %x\n", val);
- ret = regmap_read(priv->peri_crg, 0xac,
- &val);
- if (!ret)
- dev_info(priv->dev, "peri_crg 0xac %x\n", val);
- ret = regmap_read(priv->pctrl, 0x10,
- &val);
- if (!ret)
- dev_info(priv->dev, "pctrl 0x10 %x\n", val);
- }
-
return 0;
out:
dev_err(priv->dev, "failed to init phy ret: %d\n", ret);
@@ -586,7 +576,11 @@ static int kirin970_phy_exit(struct phy *phy)
if (ret)
goto out;
- if (!kirin970_is_abbclk_seleted(priv)) {
+ if (kirin970_is_abbclk_seleted(priv)) {
+ /* disable usb_tcxo_en */
+ ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3,
+ USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START);
+ } else {
ret = regmap_write(priv->peri_crg, PERI_CRG_PERDIS6,
GT_CLK_USB2PHY_REF);
if (ret)
--
2.26.2
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
