[PATCH 33/44] staging: regulator: hi6421v600-regulator: convert to use get/set voltage_sel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



As the supported LDOs on this driver are all using a selector,
change the implementation to use get_voltage_sel and
set_voltage_sel ops.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
---
 .../staging/hikey9xx/hi6421v600-regulator.c   | 58 +++++++------------
 1 file changed, 22 insertions(+), 36 deletions(-)

diff --git a/drivers/staging/hikey9xx/hi6421v600-regulator.c b/drivers/staging/hikey9xx/hi6421v600-regulator.c
index f77ecea78597..abd1f43dd5ec 100644
--- a/drivers/staging/hikey9xx/hi6421v600-regulator.c
+++ b/drivers/staging/hikey9xx/hi6421v600-regulator.c
@@ -86,8 +86,8 @@ static int hi6421_spmi_regulator_enable(struct regulator_dev *rdev)
 
 	/* set enable register */
 	hi6421_spmi_pmic_rmw(pmic, rdev->desc->enable_reg,
-		      rdev->desc->enable_mask,
-				rdev->desc->enable_mask);
+			     rdev->desc->enable_mask,
+			     rdev->desc->enable_mask);
 	dev_dbg(&rdev->dev, "%s: enable_reg=0x%x, enable_mask=0x%x\n",
 		 __func__, rdev->desc->enable_reg,
 		 rdev->desc->enable_mask);
@@ -109,64 +109,49 @@ static int hi6421_spmi_regulator_disable(struct regulator_dev *rdev)
 	return 0;
 }
 
-static int hi6421_spmi_regulator_get_voltage(struct regulator_dev *rdev)
+static int hi6421_spmi_regulator_get_voltage_sel(struct regulator_dev *rdev)
 {
 	struct hi6421v600_regulator *sreg = rdev_get_drvdata(rdev);
 	struct hi6421_spmi_pmic *pmic = sreg->pmic;
 	u32 reg_val, selector;
-	int vol;
 
 	/* get voltage selector */
 	reg_val = hi6421_spmi_pmic_read(pmic, rdev->desc->vsel_reg);
-	selector = (reg_val & rdev->desc->vsel_mask) >>
-				(ffs(rdev->desc->vsel_mask) - 1);
 
-	vol = rdev->desc->ops->list_voltage(rdev, selector);
+	selector = (reg_val & rdev->desc->vsel_mask) >>	(ffs(rdev->desc->vsel_mask) - 1);
 
 	dev_dbg(&rdev->dev,
-		"%s: vsel_reg=0x%x, val=0x%x, entry=0x%x, voltage=%d mV\n",
-		 __func__, rdev->desc->vsel_reg, reg_val, selector, vol/ 1000);
+		"%s: vsel_reg=0x%x, value=0x%x, entry=0x%x, voltage=%d mV\n",
+		 __func__, rdev->desc->vsel_reg, reg_val, selector,
+		rdev->desc->ops->list_voltage(rdev, selector) / 1000);
 
-	return vol;
+	return selector;
 }
 
-static int hi6421_spmi_regulator_set_voltage(struct regulator_dev *rdev,
-				      int min_uV, int max_uV, unsigned int *selector)
+static int hi6421_spmi_regulator_set_voltage_sel(struct regulator_dev *rdev,
+						 unsigned int selector)
 {
 	struct hi6421v600_regulator *sreg = rdev_get_drvdata(rdev);
 	struct hi6421_spmi_pmic *pmic = sreg->pmic;
-	u32 vsel;
-	int uV, ret = 0;
-
-	for (vsel = 0; vsel < rdev->desc->n_voltages; vsel++) {
-		uV = rdev->desc->volt_table[vsel];
-		dev_dbg(&rdev->dev,
-			"%s: min %d, max %d, value[%u] = %d\n",
-			__func__, min_uV, max_uV, vsel, uV);
-
-		/* Break at the first in-range value */
-		if (min_uV <= uV && uV <= max_uV)
-			break;
-	}
+	u32 reg_val;
 
 	/* unlikely to happen. sanity test done by regulator core */
-	if (unlikely(vsel == rdev->desc->n_voltages))
+	if (unlikely(selector >= rdev->desc->n_voltages))
 		return -EINVAL;
 
-	*selector = vsel;
+	reg_val = selector << (ffs(rdev->desc->vsel_mask) - 1);
+
 	/* set voltage selector */
 	hi6421_spmi_pmic_rmw(pmic, rdev->desc->vsel_reg,
-		      rdev->desc->vsel_mask,
-		      vsel << (ffs(rdev->desc->vsel_mask) - 1));
+			     rdev->desc->vsel_mask, reg_val);
 
 	dev_dbg(&rdev->dev,
-		"%s: vsel_reg=0x%x, vsel_mask=0x%x, value=0x%x, voltage=%d mV\n",
+		"%s: vsel_reg=0x%x, mask=0x%x, value=0x%x, voltage=%d mV\n",
 		 __func__,
-		 rdev->desc->vsel_reg,
-		 rdev->desc->vsel_mask,
-		 vsel << (ffs(rdev->desc->vsel_mask) - 1), uV / 1000);
+		 rdev->desc->vsel_reg, rdev->desc->vsel_mask, reg_val,
+		 rdev->desc->ops->list_voltage(rdev, selector) / 1000);
 
-	return ret;
+	return 0;
 }
 
 static unsigned int hi6421_spmi_regulator_get_mode(struct regulator_dev *rdev)
@@ -315,8 +300,9 @@ static struct regulator_ops hi6421_spmi_ldo_rops = {
 	.enable = hi6421_spmi_regulator_enable,
 	.disable = hi6421_spmi_regulator_disable,
 	.list_voltage = regulator_list_voltage_table,
-	.get_voltage = hi6421_spmi_regulator_get_voltage,
-	.set_voltage = hi6421_spmi_regulator_set_voltage,
+	.map_voltage = regulator_map_voltage_iterate,
+	.get_voltage_sel = hi6421_spmi_regulator_get_voltage_sel,
+	.set_voltage_sel = hi6421_spmi_regulator_set_voltage_sel,
 	.get_mode = hi6421_spmi_regulator_get_mode,
 	.set_mode = hi6421_spmi_regulator_set_mode,
 	.get_optimum_mode = hi6421_spmi_regulator_get_optimum_mode,
-- 
2.26.2

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux