[PATCH 07/44] staging: spmi: hisi-spmi-controller: add debug when values are read/write

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



It is interesting to be able to check if the driver is doing
the right thing. So, add some debug macros to allow checking it.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
---
 drivers/staging/hikey9xx/hisi-spmi-controller.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/hikey9xx/hisi-spmi-controller.c b/drivers/staging/hikey9xx/hisi-spmi-controller.c
index cacd28150b49..e996114bc717 100644
--- a/drivers/staging/hikey9xx/hisi-spmi-controller.c
+++ b/drivers/staging/hikey9xx/hisi-spmi-controller.c
@@ -41,7 +41,6 @@
 #define SPMI_APB_SPMI_CMD_EN				BIT(31)
 #define SPMI_APB_SPMI_CMD_TYPE_OFFSET			24
 #define SPMI_APB_SPMI_CMD_LENGTH_OFFSET			20
-
 #define SPMI_APB_SPMI_CMD_SLAVEID_OFFSET		16
 #define SPMI_APB_SPMI_CMD_ADDR_OFFSET			0
 
@@ -135,10 +134,11 @@ static int spmi_controller_wait_for_done(struct spmi_controller_dev *ctrl_dev,
 }
 
 static int spmi_read_cmd(struct spmi_controller *ctrl,
-			 u8 opc, u8 sid, u16 addr, u8 *buf, size_t bc)
+			 u8 opc, u8 sid, u16 addr, u8 *__buf, size_t bc)
 {
 	struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev);
 	unsigned long flags;
+	u8 *buf = __buf;
 	u32 cmd, data;
 	int rc;
 	u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel;
@@ -197,13 +197,18 @@ static int spmi_read_cmd(struct spmi_controller *ctrl,
 	if (rc)
 		dev_err(spmi_controller->dev, "spmi read wait timeout op:0x%x sid:%d addr:0x%x bc:%ld\n",
 			opc, sid, addr, bc + 1);
+	else
+		dev_dbg(spmi_controller->dev, "%s: id:%d addr:0x%x, read value: %*ph\n",
+			__func__, sid, addr, (int)bc, __buf);
+
 	return rc;
 }
 
 static int spmi_write_cmd(struct spmi_controller *ctrl,
-			  u8 opc, u8 sid, u16 addr, const u8 *buf, size_t bc)
+			  u8 opc, u8 sid, u16 addr, const u8 *__buf, size_t bc)
 {
 	struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev);
+	const u8 *buf = __buf;
 	unsigned long flags;
 	u32 cmd, data;
 	int rc;
@@ -263,6 +268,9 @@ static int spmi_write_cmd(struct spmi_controller *ctrl,
 	if (rc)
 		dev_err(spmi_controller->dev, "spmi write wait timeout op:0x%x sid:%d addr:0x%x bc:%ld\n",
 			opc, sid, addr, bc);
+	else
+		dev_dbg(spmi_controller->dev, "%s: id:%d addr:0x%x, wrote value: %*ph\n",
+			__func__, sid, addr, (int)bc, __buf);
 
 	return rc;
 }
@@ -275,6 +283,7 @@ static int spmi_controller_probe(struct platform_device *pdev)
 	int ret = 0;
 
 	dev_info(&pdev->dev, "HISI SPMI probe\n");
+
 	ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*spmi_controller));
 	if (!ctrl) {
 		dev_err(&pdev->dev, "can not allocate spmi_controller data\n");
-- 
2.26.2

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux