Code cleanup. Use Linux function instead of Broadcom specific
one. On spots where the device object is not yet available,
pr_err() is used instead.
Signed-off-by: Roland Vossen <rvossen@xxxxxxxxxxxx>
Reviewed-by: Arend van Spriel <arend@xxxxxxxxxxxx>
---
drivers/staging/brcm80211/brcmsmac/wl_mac80211.c | 215 ++++++++++++----------
drivers/staging/brcm80211/brcmsmac/wlc_antsel.c | 7 +-
2 files changed, 123 insertions(+), 99 deletions(-)
diff --git a/drivers/staging/brcm80211/brcmsmac/wl_mac80211.c b/drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
index bf18cfc..870544e 100644
--- a/drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
+++ b/drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
@@ -16,6 +16,8 @@
#define __UNDEF_NO_VERSION__
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/etherdevice.h>
#include <linux/types.h>
@@ -156,7 +158,7 @@ static void wl_ops_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
WL_LOCK(wl);
if (!wl->pub->up) {
- WL_ERROR("ops->tx called while down\n");
+ dev_err(wl->dev, "ops->tx called while down\n");
kfree_skb(skb);
goto done;
}
@@ -205,8 +207,8 @@ wl_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
vif->type != NL80211_IFTYPE_STATION &&
vif->type != NL80211_IFTYPE_WDS &&
vif->type != NL80211_IFTYPE_ADHOC) {
- WL_ERROR("%s: Attempt to add type %d, only STA for now\n",
- __func__, vif->type);
+ dev_err(&hw->wiphy->dev, "%s: Attempt to add type %d, only"
+ " STA for now\n", __func__, vif->type);
return -EOPNOTSUPP;
}
@@ -216,7 +218,8 @@ wl_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
WL_UNLOCK(wl);
if (err != 0) {
- WL_ERROR("%s: wl_up() returned %d\n", __func__, err);
+ dev_err(wl->dev, "%s: wl_up() returned %d\n", __func__,
+ err);
}
return err;
}
@@ -251,7 +254,8 @@ ieee_set_channel(struct ieee80211_hw *hw, struct ieee80211_channel *chan,
break;
case NL80211_CHAN_HT40MINUS:
case NL80211_CHAN_HT40PLUS:
- WL_ERROR("%s: Need to implement 40 Mhz Channels!\n", __func__);
+ dev_err(wl->dev,
+ "%s: Need to implement 40 Mhz Channels!\n", __func__);
err = 1;
break;
}
@@ -267,13 +271,15 @@ static int wl_ops_config(struct ieee80211_hw *hw, u32 changed)
struct wl_info *wl = HW_TO_WL(hw);
int err = 0;
int new_int;
+ struct device *dev;
WL_LOCK(wl);
+ dev = wl->dev;
if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) {
if (wlc_iovar_setint
(wl->wlc, "bcn_li_bcn", conf->listen_interval)) {
- WL_ERROR("%s: Error setting listen_interval\n",
- __func__);
+ dev_err(dev, "%s: Error setting listen_interval\n",
+ __func__);
err = -EIO;
goto config_out;
}
@@ -281,25 +287,26 @@ static int wl_ops_config(struct ieee80211_hw *hw, u32 changed)
ASSERT(new_int == conf->listen_interval);
}
if (changed & IEEE80211_CONF_CHANGE_MONITOR)
- WL_ERROR("%s: change monitor mode: %s (implement)\n", __func__,
- conf->flags & IEEE80211_CONF_MONITOR ?
- "true" : "false");
+ dev_err(dev, "%s: change monitor mode: %s (implement)\n",
+ __func__, conf->flags & IEEE80211_CONF_MONITOR ?
+ "true" : "false");
if (changed & IEEE80211_CONF_CHANGE_PS)
- WL_ERROR("%s: change power-save mode: %s (implement)\n",
- __func__, conf->flags & IEEE80211_CONF_PS ?
- "true" : "false");
+ dev_err(dev, "%s: change power-save mode: %s (implement)\n",
+ __func__, conf->flags & IEEE80211_CONF_PS ?
+ "true" : "false");
if (changed & IEEE80211_CONF_CHANGE_POWER) {
if (wlc_iovar_setint
(wl->wlc, "qtxpower", conf->power_level * 4)) {
- WL_ERROR("%s: Error setting power_level\n", __func__);
+ dev_err(dev, "%s: Error setting power_level\n",
+ __func__);
err = -EIO;
goto config_out;
}
wlc_iovar_getint(wl->wlc, "qtxpower", &new_int);
if (new_int != (conf->power_level * 4))
- WL_ERROR("%s: Power level req != actual, %d %d\n",
- __func__, conf->power_level * 4, new_int);
+ dev_err(dev, "%s: Power level req != actual, %d %d\n",
+ __func__, conf->power_level * 4, new_int);
}
if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
err = ieee_set_channel(hw, conf->channel, conf->channel_type);
@@ -308,13 +315,13 @@ static int wl_ops_config(struct ieee80211_hw *hw, u32 changed)
if (wlc_set
(wl->wlc, WLC_SET_SRL,
conf->short_frame_max_tx_count) < 0) {
- WL_ERROR("%s: Error setting srl\n", __func__);
+ dev_err(dev, "%s: Error setting srl\n", __func__);
err = -EIO;
goto config_out;
}
if (wlc_set(wl->wlc, WLC_SET_LRL, conf->long_frame_max_tx_count)
< 0) {
- WL_ERROR("%s: Error setting lrl\n", __func__);
+ dev_err(dev, "%s: Error setting lrl\n", __func__);
err = -EIO;
goto config_out;
}
@@ -331,24 +338,25 @@ wl_ops_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_bss_conf *info, u32 changed)
{
struct wl_info *wl = HW_TO_WL(hw);
+ struct device *dev = wl->dev;
int val;
if (changed & BSS_CHANGED_ASSOC) {
/* association status changed (associated/disassociated)
* also implies a change in the AID.
*/
- WL_ERROR("%s: %s: %sassociated\n", KBUILD_MODNAME, __func__,
- info->assoc ? "" : "dis");
+ dev_err(dev, "%s: %s: %sassociated\n", KBUILD_MODNAME,
+ __func__, info->assoc ? "" : "dis");
wlc_associate_upd(wl->wlc, info->assoc);
}
if (changed & BSS_CHANGED_ERP_CTS_PROT) {
/* CTS protection changed */
- WL_ERROR("%s: use_cts_prot: %s (implement)\n", __func__,
+ dev_err(dev, "%s: use_cts_prot: %s (implement)\n", __func__,
info->use_cts_prot ? "true" : "false");
}
if (changed & BSS_CHANGED_ERP_PREAMBLE) {
/* preamble changed */
- WL_ERROR("%s: short preamble: %s (implement)\n", __func__,
+ dev_err(dev, "%s: short preamble: %s (implement)\n", __func__,
info->use_short_preamble ? "true" : "false");
}
if (changed & BSS_CHANGED_ERP_SLOT) {
@@ -375,8 +383,8 @@ wl_ops_bss_info_changed(struct ieee80211_hw *hw,
}
if (changed & BSS_CHANGED_BASIC_RATES) {
/* Basic rateset changed */
- WL_ERROR("%s: Need to change Basic Rates: 0x%x (implement)\n",
- __func__, (u32) info->basic_rates);
+ dev_err(dev, "%s: Need to change Basic Rates: 0x%x"
+ " (implement)\n", __func__, (u32) info->basic_rates);
}
if (changed & BSS_CHANGED_BEACON_INT) {
/* Beacon interval changed */
@@ -395,40 +403,40 @@ wl_ops_bss_info_changed(struct ieee80211_hw *hw,
}
if (changed & BSS_CHANGED_BEACON) {
/* Beacon data changed, retrieve new beacon (beaconing modes) */
- WL_ERROR("%s: beacon changed\n", __func__);
+ dev_err(dev, "%s: beacon changed\n", __func__);
}
if (changed & BSS_CHANGED_BEACON_ENABLED) {
/* Beaconing should be enabled/disabled (beaconing modes) */
- WL_ERROR("%s: Beacon enabled: %s\n", __func__,
+ dev_err(dev, "%s: Beacon enabled: %s\n", __func__,
info->enable_beacon ? "true" : "false");
}
if (changed & BSS_CHANGED_CQM) {
/* Connection quality monitor config changed */
- WL_ERROR("%s: cqm change: threshold %d, hys %d (implement)\n",
+ dev_err(dev, "%s: cqm change: threshold %d, hys %d (implement)\n",
__func__, info->cqm_rssi_thold, info->cqm_rssi_hyst);
}
if (changed & BSS_CHANGED_IBSS) {
/* IBSS join status changed */
- WL_ERROR("%s: IBSS joined: %s (implement)\n", __func__,
+ dev_err(dev, "%s: IBSS joined: %s (implement)\n", __func__,
info->ibss_joined ? "true" : "false");
}
if (changed & BSS_CHANGED_ARP_FILTER) {
/* Hardware ARP filter address list or state changed */
- WL_ERROR("%s: arp filtering: enabled %s, count %d (implement)\n",
- __func__, info->arp_filter_enabled ? "true" : "false",
- info->arp_addr_cnt);
+ dev_err(dev, "%s: arp filtering: enabled %s, count %d"
+ " (implement)\n", __func__, info->arp_filter_enabled ?
+ "true" : "false", info->arp_addr_cnt);
}
if (changed & BSS_CHANGED_QOS) {
/*
* QoS for this association was enabled/disabled.
* Note that it is only ever disabled for station mode.
*/
- WL_ERROR("%s: qos enabled: %s (implement)\n", __func__,
+ dev_err(dev, "%s: qos enabled: %s (implement)\n", __func__,
info->qos ? "true" : "false");
}
if (changed & BSS_CHANGED_IDLE) {
/* Idle changed for this BSS/interface */
- WL_ERROR("%s: BSS idle: %s (implement)\n", __func__,
+ dev_err(dev, "%s: BSS idle: %s (implement)\n", __func__,
info->idle ? "true" : "false");
}
return;
@@ -440,21 +448,22 @@ wl_ops_configure_filter(struct ieee80211_hw *hw,
unsigned int *total_flags, u64 multicast)
{
struct wl_info *wl = hw->priv;
+ struct device *dev = wl->dev;
changed_flags &= MAC_FILTERS;
*total_flags &= MAC_FILTERS;
if (changed_flags & FIF_PROMISC_IN_BSS)
- WL_ERROR("FIF_PROMISC_IN_BSS\n");
+ dev_err(dev, "FIF_PROMISC_IN_BSS\n");
if (changed_flags & FIF_ALLMULTI)
- WL_ERROR("FIF_ALLMULTI\n");
+ dev_err(dev, "FIF_ALLMULTI\n");
if (changed_flags & FIF_FCSFAIL)
- WL_ERROR("FIF_FCSFAIL\n");
+ dev_err(dev, "FIF_FCSFAIL\n");
if (changed_flags & FIF_PLCPFAIL)
- WL_ERROR("FIF_PLCPFAIL\n");
+ dev_err(dev, "FIF_PLCPFAIL\n");
if (changed_flags & FIF_CONTROL)
- WL_ERROR("FIF_CONTROL\n");
+ dev_err(dev, "FIF_CONTROL\n");
if (changed_flags & FIF_OTHER_BSS)
- WL_ERROR("FIF_OTHER_BSS\n");
+ dev_err(dev, "FIF_OTHER_BSS\n");
if (changed_flags & FIF_BCN_PRBRESP_PROMISC) {
no_printk("FIF_BCN_PRBRESP_PROMISC\n");
WL_LOCK(wl);
@@ -499,7 +508,7 @@ static void wl_ops_sw_scan_complete(struct ieee80211_hw *hw)
static void wl_ops_set_tsf(struct ieee80211_hw *hw, u64 tsf)
{
- WL_ERROR("%s: Enter\n", __func__);
+ dev_err(&hw->wiphy->dev, "%s: Enter\n", __func__);
return;
}
@@ -537,7 +546,8 @@ wl_ops_sta_notify(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
no_printk("%s: Enter\n", __func__);
switch (cmd) {
default:
- WL_ERROR("%s: Unknown cmd = %d\n", __func__, cmd);
+ dev_err(&hw->wiphy->dev, "%s: Unknown cmd = %d\n", __func__,
+ cmd);
break;
}
return;
@@ -562,7 +572,7 @@ wl_ops_conf_tx(struct ieee80211_hw *hw, u16 queue,
static u64 wl_ops_get_tsf(struct ieee80211_hw *hw)
{
- WL_ERROR("%s: Enter\n", __func__);
+ dev_err(&hw->wiphy->dev, "%s: Enter\n", __func__);
return 0;
}
@@ -635,7 +645,8 @@ wl_ops_ampdu_action(struct ieee80211_hw *hw,
status = wlc_aggregatable(wl->wlc, tid);
WL_UNLOCK(wl);
if (!status) {
- /* WL_ERROR("START: tid %d is not agg' able, return FAILURE to stack\n", tid); */
+ dev_err(wl->dev, "START: tid %d is not agg\'able\n",
+ tid);
return -1;
}
/* XXX: Use the starting sequence number provided ... */
@@ -656,7 +667,8 @@ wl_ops_ampdu_action(struct ieee80211_hw *hw,
__func__);
break;
default:
- WL_ERROR("%s: Invalid command, ignoring\n", __func__);
+ dev_err(wl->dev, "%s: Invalid command, ignoring\n",
+ __func__);
}
return 0;
@@ -736,10 +748,6 @@ static struct wl_info *wl_attach(u16 vendor, u16 device, unsigned long regs,
unit = wl_found;
err = 0;
- if (unit < 0) {
- WL_ERROR("wl%d: unit number overflow, exiting\n", unit);
- return NULL;
- }
/* allocate private info */
hw = pci_get_drvdata(btparam); /* btparam == pdev */
@@ -747,6 +755,11 @@ static struct wl_info *wl_attach(u16 vendor, u16 device, unsigned long regs,
ASSERT(wl);
wl->dev = &hw->wiphy->dev;
+ if (unit < 0) {
+ dev_err(wl->dev, "wl%d: unit number overflow, exiting\n", unit);
+ return NULL;
+ }
+
atomic_set(&wl->callbacks, 0);
/* setup the bottom half handler */
@@ -768,7 +781,7 @@ static struct wl_info *wl_attach(u16 vendor, u16 device, unsigned long regs,
wl->regsva = ioremap_nocache(base_addr, PCI_BAR0_WINSZ);
if (wl->regsva == NULL) {
- WL_ERROR("wl%d: ioremap() failed\n", unit);
+ dev_err(wl->dev, "wl%d: ioremap() failed\n", unit);
goto fail;
}
spin_lock_init(&wl->lock);
@@ -776,8 +789,8 @@ static struct wl_info *wl_attach(u16 vendor, u16 device, unsigned long regs,
/* prepare ucode */
if (wl_request_fw(wl, (struct pci_dev *)btparam) < 0) {
- WL_ERROR("%s: Failed to find firmware usually in %s\n",
- KBUILD_MODNAME, "/lib/firmware/brcm");
+ dev_err(wl->dev, "%s: Failed to find firmware usually in %s\n",
+ KBUILD_MODNAME, "/lib/firmware/brcm");
wl_release_fw(wl);
wl_remove((struct pci_dev *)btparam);
goto fail1;
@@ -789,8 +802,8 @@ static struct wl_info *wl_attach(u16 vendor, u16 device, unsigned long regs,
&hw->wiphy->dev);
wl_release_fw(wl);
if (!wl->wlc) {
- WL_ERROR("%s: wlc_attach() failed with code %d\n",
- KBUILD_MODNAME, err);
+ dev_err(wl->dev, "%s: wlc_attach() failed with code %d\n",
+ KBUILD_MODNAME, err);
goto fail;
}
wl->pub = wlc_pub(wl->wlc);
@@ -801,12 +814,13 @@ static struct wl_info *wl_attach(u16 vendor, u16 device, unsigned long regs,
if (wlc_iovar_setint(wl->wlc, "mpc", 0)) {
- WL_ERROR("wl%d: Error setting MPC variable to 0\n", unit);
+ dev_err(wl->dev, "wl%d: Error setting MPC variable to 0\n",
+ unit);
}
/* register our interrupt handler */
if (request_irq(irq, wl_isr, IRQF_SHARED, KBUILD_MODNAME, wl)) {
- WL_ERROR("wl%d: request_irq() failed\n", unit);
+ dev_err(wl->dev, "wl%d: request_irq() failed\n", unit);
goto fail;
}
wl->irq = irq;
@@ -816,7 +830,8 @@ static struct wl_info *wl_attach(u16 vendor, u16 device, unsigned long regs,
NULL);
if (ieee_hw_init(hw)) {
- WL_ERROR("wl%d: %s: ieee_hw_init failed!\n", unit, __func__);
+ dev_err(wl->dev, "wl%d: %s: ieee_hw_init failed!\n", unit,
+ __func__);
goto fail;
}
@@ -826,8 +841,8 @@ static struct wl_info *wl_attach(u16 vendor, u16 device, unsigned long regs,
err = ieee80211_register_hw(hw);
if (err) {
- WL_ERROR("%s: ieee80211_register_hw failed, status %d\n",
- __func__, err);
+ dev_err(wl->dev, "%s: ieee80211_register_hw failed, status"
+ "%d\n", __func__, err);
}
if (wl->pub->srom_ccode[0])
@@ -835,8 +850,8 @@ static struct wl_info *wl_attach(u16 vendor, u16 device, unsigned long regs,
else
err = wl_set_hint(wl, "US");
if (err) {
- WL_ERROR("%s: regulatory_hint failed, status %d\n",
- __func__, err);
+ dev_err(wl->dev, "%s: regulatory_hint failed, status %d\n",
+ __func__, err);
}
wl_found++;
@@ -1031,7 +1046,7 @@ static int ieee_hw_rate_init(struct ieee80211_hw *hw)
hw->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL;
if (wlc_get(wl->wlc, WLC_GET_PHYLIST, (int *)&phy_list) < 0) {
- WL_ERROR("Phy list failed\n");
+ dev_err(&hw->wiphy->dev, "Phy list failed\n");
}
no_printk("%s: phylist = %c\n", __func__, phy_list[0]);
@@ -1121,9 +1136,9 @@ wl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
rc = pci_enable_device(pdev);
if (rc) {
- WL_ERROR("%s: Cannot enable device %d-%d_%d\n",
- __func__, pdev->bus->number, PCI_SLOT(pdev->devfn),
- PCI_FUNC(pdev->devfn));
+ pr_err("%s: Cannot enable device %d-%d_%d\n",
+ __func__, pdev->bus->number, PCI_SLOT(pdev->devfn),
+ PCI_FUNC(pdev->devfn));
return -ENODEV;
}
pci_set_master(pdev);
@@ -1134,7 +1149,7 @@ wl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
hw = ieee80211_alloc_hw(sizeof(struct wl_info), &wl_ops);
if (!hw) {
- WL_ERROR("%s: ieee80211_alloc_hw failed\n", __func__);
+ pr_err("%s: ieee80211_alloc_hw failed\n", __func__);
rc = -ENOMEM;
goto err_1;
}
@@ -1149,13 +1164,13 @@ wl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
PCI_BUS, pdev, pdev->irq);
if (!wl) {
- WL_ERROR("%s: %s: wl_attach failed!\n",
- KBUILD_MODNAME, __func__);
+ pr_err("%s: %s: wl_attach failed!\n", KBUILD_MODNAME,
+ __func__);
return -ENODEV;
}
return 0;
err_1:
- WL_ERROR("%s: err_1: Major hoarkage\n", __func__);
+ pr_err("%s: err_1: Major hoarkage\n", __func__);
return 0;
}
@@ -1169,7 +1184,8 @@ static int wl_suspend(struct pci_dev *pdev, pm_message_t state)
hw = pci_get_drvdata(pdev);
wl = HW_TO_WL(hw);
if (!wl) {
- WL_ERROR("wl: wl_suspend: pci_get_drvdata failed\n");
+ dev_err(wl->dev,
+ "wl: wl_suspend: pci_get_drvdata failed\n");
return -ENODEV;
}
@@ -1194,7 +1210,8 @@ static int wl_resume(struct pci_dev *pdev)
hw = pci_get_drvdata(pdev);
wl = HW_TO_WL(hw);
if (!wl) {
- WL_ERROR("wl: wl_resume: pci_get_drvdata failed\n");
+ dev_err(wl->dev,
+ "wl: wl_resume: pci_get_drvdata failed\n");
return -ENODEV;
}
@@ -1234,7 +1251,7 @@ static void wl_remove(struct pci_dev *pdev)
hw = pci_get_drvdata(pdev);
wl = HW_TO_WL(hw);
if (!wl) {
- WL_ERROR("wl: wl_remove: pci_get_drvdata failed\n");
+ pr_err("wl: wl_remove: pci_get_drvdata failed\n");
return;
}
@@ -1242,7 +1259,7 @@ static void wl_remove(struct pci_dev *pdev)
status = wlc_chipmatch(pdev->vendor, pdev->device);
WL_UNLOCK(wl);
if (!status) {
- WL_ERROR("wl: wl_remove: wlc_chipmatch failed\n");
+ dev_err(wl->dev, "wl: wl_remove: wlc_chipmatch failed\n");
return;
}
if (wl->wlc) {
@@ -1398,7 +1415,7 @@ static void wl_free(struct wl_info *wl)
void wl_txflowcontrol(struct wl_info *wl, struct wl_if *wlif, bool state,
int prio)
{
- WL_ERROR("Shouldn't be here %s\n", __func__);
+ dev_err(wl->dev, "Shouldn't be here %s\n", __func__);
}
/*
@@ -1616,7 +1633,8 @@ struct wl_timer *wl_init_timer(struct wl_info *wl, void (*fn) (void *arg),
t = kzalloc(sizeof(struct wl_timer), GFP_ATOMIC);
if (!t) {
- WL_ERROR("wl%d: wl_init_timer: out of memory\n", wl->pub->unit);
+ dev_err(wl->dev,
+ "wl%d: wl_init_timer: out of memory\n", wl->pub->unit);
return 0;
}
@@ -1647,8 +1665,8 @@ void wl_add_timer(struct wl_info *wl, struct wl_timer *t, uint ms, int periodic)
{
#ifdef BCMDBG
if (t->set) {
- WL_ERROR("%s: Already set. Name: %s, per %d\n",
- __func__, t->name, periodic);
+ dev_err(wl->dev, "%s: Already set. Name: %s, per %d\n",
+ __func__, t->name, periodic);
}
#endif
ASSERT(!t->set);
@@ -1775,6 +1793,8 @@ int wl_ucode_init_buf(struct wl_info *wl, void **pbuf, u32 idx)
int i, entry;
const u8 *pdata;
struct wl_fw_hdr *hdr;
+ struct device *dev = wl->dev;
+
for (i = 0; i < wl->fw.fw_cnt; i++) {
hdr = (struct wl_fw_hdr *)wl->fw.fw_hdr[i]->data;
for (entry = 0; entry < wl->fw.hdr_num_entries[i];
@@ -1783,8 +1803,8 @@ int wl_ucode_init_buf(struct wl_info *wl, void **pbuf, u32 idx)
pdata = wl->fw.fw_bin[i]->data + hdr->offset;
*pbuf = kmalloc(hdr->len, GFP_ATOMIC);
if (*pbuf == NULL) {
- WL_ERROR("fail to alloc %d bytes\n",
- hdr->len);
+ dev_err(dev, "fail to alloc %d bytes"
+ "\n", hdr->len);
goto fail;
}
memcpy(*pbuf, pdata, hdr->len);
@@ -1792,7 +1812,7 @@ int wl_ucode_init_buf(struct wl_info *wl, void **pbuf, u32 idx)
}
}
}
- WL_ERROR("ERROR: ucode buf tag:%d can not be found!\n", idx);
+ dev_err(dev, "ERROR: ucode buf tag:%d can not be found!\n", idx);
*pbuf = NULL;
fail:
return BCME_NOTFOUND;
@@ -1819,7 +1839,7 @@ int wl_ucode_init_uint(struct wl_info *wl, u32 *data, u32 idx)
}
}
}
- WL_ERROR("ERROR: ucode tag:%d can not be found!\n", idx);
+ dev_err(wl->dev, "ERROR: ucode tag:%d can not be found!\n", idx);
return -1;
}
@@ -1830,7 +1850,7 @@ int wl_ucode_init_uint(struct wl_info *wl, u32 *data, u32 idx)
static int wl_request_fw(struct wl_info *wl, struct pci_dev *pdev)
{
int status;
- struct device *device = &pdev->dev;
+ struct device *dev = &pdev->dev;
char fw_name[100];
int i;
@@ -1841,19 +1861,19 @@ static int wl_request_fw(struct wl_info *wl, struct pci_dev *pdev)
sprintf(fw_name, "%s-%d.fw", wl_firmwares[i],
UCODE_LOADER_API_VER);
no_printk("request fw %s\n", fw_name);
- status = request_firmware(&wl->fw.fw_bin[i], fw_name, device);
+ status = request_firmware(&wl->fw.fw_bin[i], fw_name, dev);
if (status) {
- WL_ERROR("%s: fail to load firmware %s\n",
- KBUILD_MODNAME, fw_name);
+ dev_err(dev, "%s: fail to load firmware %s\n",
+ KBUILD_MODNAME, fw_name);
return status;
}
no_printk("request fw %s\n", fw_name);
sprintf(fw_name, "%s_hdr-%d.fw", wl_firmwares[i],
UCODE_LOADER_API_VER);
- status = request_firmware(&wl->fw.fw_hdr[i], fw_name, device);
+ status = request_firmware(&wl->fw.fw_hdr[i], fw_name, dev);
if (status) {
- WL_ERROR("%s: fail to load firmware %s\n",
- KBUILD_MODNAME, fw_name);
+ dev_err(dev, "%s: fail to load firmware %s\n",
+ KBUILD_MODNAME, fw_name);
return status;
}
wl->fw.hdr_num_entries[i] =
@@ -1901,22 +1921,24 @@ int wl_check_firmwares(struct wl_info *wl)
const struct firmware *fw;
const struct firmware *fw_hdr;
struct wl_fw_hdr *ucode_hdr;
+ struct device *dev = wl->dev;
+
for (i = 0; i < WL_MAX_FW && rc == 0; i++) {
fw = wl->fw.fw_bin[i];
fw_hdr = wl->fw.fw_hdr[i];
if (fw == NULL && fw_hdr == NULL) {
break;
} else if (fw == NULL || fw_hdr == NULL) {
- WL_ERROR("%s: invalid bin/hdr fw\n", __func__);
+ dev_err(dev, "%s: invalid bin/hdr fw\n", __func__);
rc = -EBADF;
} else if (fw_hdr->size % sizeof(struct wl_fw_hdr)) {
- WL_ERROR("%s: non integral fw hdr file size %zu/%zu\n",
- __func__, fw_hdr->size,
- sizeof(struct wl_fw_hdr));
+ dev_err(dev, "%s: non integral fw hdr file size %zu/%zu"
+ "\n", __func__, fw_hdr->size,
+ sizeof(struct wl_fw_hdr));
rc = -EBADF;
} else if (fw->size < MIN_FW_SIZE || fw->size > MAX_FW_SIZE) {
- WL_ERROR("%s: out of bounds fw file size %zu\n",
- __func__, fw->size);
+ dev_err(dev, "%s: out of bounds fw file size %zu\n",
+ __func__, fw->size);
rc = -EBADF;
} else {
/* check if ucode section overruns firmware image */
@@ -1925,15 +1947,16 @@ int wl_check_firmwares(struct wl_info *wl)
!rc; entry++, ucode_hdr++) {
if (ucode_hdr->offset + ucode_hdr->len >
fw->size) {
- WL_ERROR("%s: conflicting bin/hdr\n",
- __func__);
+ dev_err(dev, "%s: conflicting bin/hdr"
+ "\n", __func__);
rc = -EBADF;
}
}
}
}
if (rc == 0 && wl->fw.fw_cnt != i) {
- WL_ERROR("%s: invalid fw_cnt=%d\n", __func__, wl->fw.fw_cnt);
+ dev_err(dev, "%s: invalid fw_cnt=%d\n", __func__,
+ wl->fw.fw_cnt);
rc = -EBADF;
}
return rc;
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_antsel.c b/drivers/staging/brcm80211/brcmsmac/wlc_antsel.c
index d0a76ca..4516377 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_antsel.c
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_antsel.c
@@ -98,8 +98,8 @@ struct antsel_info *wlc_antsel_attach(struct wlc_info *wlc)
asi = kzalloc(sizeof(struct antsel_info), GFP_ATOMIC);
if (!asi) {
- WL_ERROR("wl%d: wlc_antsel_attach: out of mem\n",
- wlc->pub->unit);
+ dev_err(wlc->dev, "wl%d: wlc_antsel_attach: out of mem\n",
+ wlc->pub->unit);
return NULL;
}
@@ -128,7 +128,8 @@ struct antsel_info *wlc_antsel_attach(struct wlc_info *wlc)
asi->antsel_avail = false;
} else {
asi->antsel_avail = false;
- WL_ERROR("wlc_antsel_attach: 2o3 board cfg invalid\n");
+ dev_err(wlc->dev, "wlc_antsel_attach: 2o3 "
+ "board cfg invalid\n");
ASSERT(0);
}
break;
--
1.7.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
