[PATCH 2/4] staging: comedi: addi_apci_1032: check INSN_CONFIG_DIGITAL_TRIG shift

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked.  Shift amounts greater than or equal to 32 will result in
undefined behavior.  Add code to deal with this.

Fixes: 33cdce6293dcc ("staging: comedi: addi_apci_1032: conform to new INSN_CONFIG_DIGITAL_TRIG"
Cc: <stable@xxxxxxxxxxxxxxx> #3.8+
Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx>
---
 .../staging/comedi/drivers/addi_apci_1032.c   | 20 +++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/staging/comedi/drivers/addi_apci_1032.c b/drivers/staging/comedi/drivers/addi_apci_1032.c
index 560649be9d13..e035c9f757a1 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1032.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1032.c
@@ -106,14 +106,22 @@ static int apci1032_cos_insn_config(struct comedi_device *dev,
 				    unsigned int *data)
 {
 	struct apci1032_private *devpriv = dev->private;
-	unsigned int shift, oldmask;
+	unsigned int shift, oldmask, himask, lomask;
 
 	switch (data[0]) {
 	case INSN_CONFIG_DIGITAL_TRIG:
 		if (data[1] != 0)
 			return -EINVAL;
 		shift = data[3];
-		oldmask = (1U << shift) - 1;
+		if (shift < 32) {
+			oldmask = (1U << shift) - 1;
+			himask = data[4] << shift;
+			lomask = data[5] << shift;
+		} else {
+			oldmask = 0xffffffffu;
+			himask = 0;
+			lomask = 0;
+		}
 		switch (data[2]) {
 		case COMEDI_DIGITAL_TRIG_DISABLE:
 			devpriv->ctrl = 0;
@@ -136,8 +144,8 @@ static int apci1032_cos_insn_config(struct comedi_device *dev,
 				devpriv->mode2 &= oldmask;
 			}
 			/* configure specified channels */
-			devpriv->mode1 |= data[4] << shift;
-			devpriv->mode2 |= data[5] << shift;
+			devpriv->mode1 |= himask;
+			devpriv->mode2 |= lomask;
 			break;
 		case COMEDI_DIGITAL_TRIG_ENABLE_LEVELS:
 			if (devpriv->ctrl != (APCI1032_CTRL_INT_ENA |
@@ -154,8 +162,8 @@ static int apci1032_cos_insn_config(struct comedi_device *dev,
 				devpriv->mode2 &= oldmask;
 			}
 			/* configure specified channels */
-			devpriv->mode1 |= data[4] << shift;
-			devpriv->mode2 |= data[5] << shift;
+			devpriv->mode1 |= himask;
+			devpriv->mode2 |= lomask;
 			break;
 		default:
 			return -EINVAL;
-- 
2.27.0

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux