msscsi.c use pr_<level> for messages
Signed-off-by: Cho, Yu-Chen <acho@xxxxxxxxxx>
---
drivers/staging/keucr/msscsi.c | 29 +++++++++++++++++------------
1 files changed, 17 insertions(+), 12 deletions(-)
diff --git a/drivers/staging/keucr/msscsi.c b/drivers/staging/keucr/msscsi.c
index cb92d25..d1a919b 100644
--- a/drivers/staging/keucr/msscsi.c
+++ b/drivers/staging/keucr/msscsi.c
@@ -1,3 +1,5 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/slab.h>
@@ -44,7 +46,7 @@ int MS_SCSIIrp(struct us_data *us, struct scsi_cmnd *srb)
//----- MS_SCSI_Test_Unit_Ready() --------------------------------------------------
int MS_SCSI_Test_Unit_Ready(struct us_data *us, struct scsi_cmnd *srb)
{
- //printk("MS_SCSI_Test_Unit_Ready\n");
+ /* pr_info("MS_SCSI_Test_Unit_Ready\n"); */
if (us->MS_Status.Insert && us->MS_Status.Ready)
return USB_STOR_TRANSPORT_GOOD;
else
@@ -59,7 +61,7 @@ int MS_SCSI_Test_Unit_Ready(struct us_data *us, struct scsi_cmnd *srb)
//----- MS_SCSI_Inquiry() --------------------------------------------------
int MS_SCSI_Inquiry(struct us_data *us, struct scsi_cmnd *srb)
{
- //printk("MS_SCSI_Inquiry\n");
+ /* pr_info("MS_SCSI_Inquiry\n"); */
BYTE data_ptr[36] = {0x00, 0x80, 0x02, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x55, 0x53, 0x42, 0x32, 0x2E, 0x30, 0x20, 0x20, 0x43, 0x61, 0x72, 0x64, 0x52, 0x65, 0x61, 0x64, 0x65, 0x72, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x30, 0x31, 0x30, 0x30};
usb_stor_set_xfer_buf(us, data_ptr, 36, srb, TO_XFER_BUF);
@@ -91,7 +93,7 @@ int MS_SCSI_Read_Capacity(struct us_data *us, struct scsi_cmnd *srb)
WORD bl_len;
BYTE buf[8];
- printk("MS_SCSI_Read_Capacity\n");
+ pr_info("MS_SCSI_Read_Capacity\n");
bl_len = 0x200;
if ( us->MS_Status.IsMSPro )
@@ -100,8 +102,8 @@ int MS_SCSI_Read_Capacity(struct us_data *us, struct scsi_cmnd *srb)
bl_num = us->MS_Lib.NumberOfLogBlock * us->MS_Lib.blockSize * 2 - 1;
us->bl_num = bl_num;
- printk("bl_len = %x\n", bl_len);
- printk("bl_num = %x\n", bl_num);
+ pr_info("bl_len = %x\n", bl_len);
+ pr_info("bl_num = %x\n", bl_num);
//srb->request_bufflen = 8;
buf[0] = (bl_num>>24) & 0xff;
@@ -130,7 +132,8 @@ int MS_SCSI_Read(struct us_data *us, struct scsi_cmnd *srb)
WORD blen = ((Cdb[7]<< 8) & 0xff00) | ((Cdb[8]<< 0) & 0x00ff);
DWORD blenByte = blen * 0x200;
- //printk("SCSIOP_READ --- bn = %X, blen = %X, srb->use_sg = %X\n", bn, blen, srb->use_sg);
+ /* pr_info("SCSIOP_READ --- bn = %X, blen = %X, srb->use_sg = %X\n",
+ bn, blen, srb->use_sg); */
if (bn > us->bl_num)
return USB_STOR_TRANSPORT_ERROR;
@@ -140,7 +143,7 @@ int MS_SCSI_Read(struct us_data *us, struct scsi_cmnd *srb)
result = ENE_LoadBinCode(us, MSP_RW_PATTERN);
if (result != USB_STOR_XFER_GOOD)
{
- printk("Load MSP RW pattern Fail !!\n");
+ pr_info("Load MSP RW pattern Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
@@ -174,7 +177,7 @@ int MS_SCSI_Read(struct us_data *us, struct scsi_cmnd *srb)
result = ENE_LoadBinCode(us, MS_RW_PATTERN);
if (result != USB_STOR_XFER_GOOD)
{
- printk("Load MS RW pattern Fail !!\n");
+ pr_info("Load MS RW pattern Fail !!\n");
result = USB_STOR_TRANSPORT_ERROR;
goto exit;
}
@@ -207,7 +210,8 @@ int MS_SCSI_Read(struct us_data *us, struct scsi_cmnd *srb)
result = ENE_SendScsiCmd(us, FDIR_READ, buf+offset, 0);
if (result != USB_STOR_XFER_GOOD)
{
- printk("MS_SCSI_Read --- result = %x\n", result);
+ pr_info("MS_SCSI_Read --- result = %x\n",
+ result);
result = USB_STOR_TRANSPORT_ERROR;
goto exit;
}
@@ -245,7 +249,7 @@ int MS_SCSI_Write(struct us_data *us, struct scsi_cmnd *srb)
result = ENE_LoadBinCode(us, MSP_RW_PATTERN);
if (result != USB_STOR_XFER_GOOD)
{
- printk("Load MSP RW pattern Fail !!\n");
+ pr_info("Load MSP RW pattern Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
@@ -280,7 +284,7 @@ int MS_SCSI_Write(struct us_data *us, struct scsi_cmnd *srb)
result = ENE_LoadBinCode(us, MS_RW_PATTERN);
if (result != USB_STOR_XFER_GOOD)
{
- printk("Load MS RW pattern Fail !!\n");
+ pr_info("Load MS RW pattern Fail !!\n");
result = USB_STOR_TRANSPORT_ERROR;
goto exit;
}
@@ -301,7 +305,8 @@ int MS_SCSI_Write(struct us_data *us, struct scsi_cmnd *srb)
result = MS_ReaderCopyBlock(us, oldphy, newphy, PhyBlockAddr, PageNum, buf+offset, len);
if (result != USB_STOR_XFER_GOOD)
{
- printk("MS_SCSI_Write --- result = %x\n", result);
+ pr_info("MS_SCSI_Write --- result = %x\n",
+ result);
result = USB_STOR_TRANSPORT_ERROR;
goto exit;
}
--
1.7.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
