Hi Jim,
On Wed, 2020-06-03 at 15:20 -0400, Jim Quinlan wrote:
> The new field in struct device 'dma_pfn_offset_map' is used to facilitate
> the use of multiple pfn offsets between cpu addrs and dma addrs. It
> subsumes the role of dev->dma_pfn_offset -- a uniform offset -- and
> designates the single offset a special case.
>
> of_dma_configure() is the typical manner to set pfn offsets but there
> are a number of ad hoc assignments to dev->dma_pfn_offset in the
> kernel code. These cases now invoke the function
> attach_uniform_dma_pfn_offset(dev, pfn_offset).
>
> Signed-off-by: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
> ---
> arch/arm/include/asm/dma-mapping.h | 9 +-
> arch/arm/mach-keystone/keystone.c | 9 +-
> arch/sh/drivers/pci/pcie-sh7786.c | 3 +-
> arch/sh/kernel/dma-coherent.c | 17 ++--
> arch/x86/pci/sta2x11-fixup.c | 7 +-
> drivers/acpi/arm64/iort.c | 5 +-
> drivers/gpu/drm/sun4i/sun4i_backend.c | 7 +-
> drivers/iommu/io-pgtable-arm.c | 2 +-
> .../platform/sunxi/sun4i-csi/sun4i_csi.c | 5 +-
> .../platform/sunxi/sun6i-csi/sun6i_csi.c | 5 +-
> drivers/of/address.c | 93 +++++++++++++++++--
> drivers/of/device.c | 8 +-
> drivers/remoteproc/remoteproc_core.c | 2 +-
> .../staging/media/sunxi/cedrus/cedrus_hw.c | 7 +-
> drivers/usb/core/message.c | 4 +-
> drivers/usb/core/usb.c | 2 +-
> include/linux/device.h | 4 +-
> include/linux/dma-direct.h | 16 +++-
> include/linux/dma-mapping.h | 45 +++++++++
> kernel/dma/coherent.c | 11 ++-
> 20 files changed, 210 insertions(+), 51 deletions(-)
>
> diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-
> mapping.h
> index bdd80ddbca34..f1e72f99468b 100644
> --- a/arch/arm/include/asm/dma-mapping.h
> +++ b/arch/arm/include/asm/dma-mapping.h
> @@ -35,8 +35,9 @@ static inline const struct dma_map_ops
> *get_arch_dma_ops(struct bus_type *bus)
> #ifndef __arch_pfn_to_dma
> static inline dma_addr_t pfn_to_dma(struct device *dev, unsigned long pfn)
> {
> - if (dev)
> - pfn -= dev->dma_pfn_offset;
> + if (dev && dev->dma_pfn_offset_map)
Would it make sense to move the dev->dma_pfn_offset_map check into
dma_pfn_offset_from_phys_addr() and return 0 if not available? Same for the
opposite variant of the function. I think it'd make the code a little simpler on
some of the use cases, and overall less error prone if anyone starts using the
function elsewhere.
> + pfn -= dma_pfn_offset_from_phys_addr(dev, PFN_PHYS(pfn));
> +
> return (dma_addr_t)__pfn_to_bus(pfn);
> }
>
> @@ -44,8 +45,8 @@ static inline unsigned long dma_to_pfn(struct device *dev,
> dma_addr_t addr)
> {
> unsigned long pfn = __bus_to_pfn(addr);
>
> - if (dev)
> - pfn += dev->dma_pfn_offset;
> + if (dev && dev->dma_pfn_offset_map)
> + pfn += dma_pfn_offset_from_dma_addr(dev, addr);
>
> return pfn;
> }
> diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-
> keystone/keystone.c
> index 638808c4e122..e7d3ee6e9cb5 100644
> --- a/arch/arm/mach-keystone/keystone.c
> +++ b/arch/arm/mach-keystone/keystone.c
> @@ -8,6 +8,7 @@
> */
> #include <linux/io.h>
> #include <linux/of.h>
> +#include <linux/dma-mapping.h>
> #include <linux/init.h>
> #include <linux/of_platform.h>
> #include <linux/of_address.h>
> @@ -38,9 +39,11 @@ static int keystone_platform_notifier(struct notifier_block
> *nb,
> return NOTIFY_BAD;
>
> if (!dev->of_node) {
> - dev->dma_pfn_offset = keystone_dma_pfn_offset;
> - dev_err(dev, "set dma_pfn_offset%08lx\n",
> - dev->dma_pfn_offset);
> + int ret = attach_uniform_dma_pfn_offset
> + (dev, keystone_dma_pfn_offset);
> +
> + dev_err(dev, "set dma_pfn_offset%08lx%s\n",
> + dev->dma_pfn_offset, ret ? " failed" : "");
> }
> return NOTIFY_OK;
> }
> diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-
> sh7786.c
> index e0b568aaa701..2e832a5c58c1 100644
> --- a/arch/sh/drivers/pci/pcie-sh7786.c
> +++ b/arch/sh/drivers/pci/pcie-sh7786.c
> @@ -12,6 +12,7 @@
> #include <linux/io.h>
> #include <linux/async.h>
> #include <linux/delay.h>
> +#include <linux/dma-mapping.h>
> #include <linux/slab.h>
> #include <linux/clk.h>
> #include <linux/sh_clk.h>
> @@ -487,7 +488,7 @@ int pcibios_map_platform_irq(const struct pci_dev *pdev,
> u8 slot, u8 pin)
>
> void pcibios_bus_add_device(struct pci_dev *pdev)
> {
> - pdev->dev.dma_pfn_offset = dma_pfn_offset;
> + attach_uniform_dma_pfn_offset(&pdev->dev, dma_pfn_offset);
> }
>
> static int __init sh7786_pcie_core_init(void)
> diff --git a/arch/sh/kernel/dma-coherent.c b/arch/sh/kernel/dma-coherent.c
> index d4811691b93c..5fc9e358b6c7 100644
> --- a/arch/sh/kernel/dma-coherent.c
> +++ b/arch/sh/kernel/dma-coherent.c
> @@ -14,6 +14,8 @@ void *arch_dma_alloc(struct device *dev, size_t size,
> dma_addr_t *dma_handle,
> {
> void *ret, *ret_nocache;
> int order = get_order(size);
> + unsigned long pfn;
> + phys_addr_t phys;
>
> gfp |= __GFP_ZERO;
>
> @@ -34,11 +36,14 @@ void *arch_dma_alloc(struct device *dev, size_t size,
> dma_addr_t *dma_handle,
> return NULL;
> }
>
> - split_page(pfn_to_page(virt_to_phys(ret) >> PAGE_SHIFT), order);
> + phys = virt_to_phys(ret);
> + pfn = phys >> PAGE_SHIFT;
nit: not sure it really pays off to have a pfn variable here.
> + split_page(pfn_to_page(pfn), order);
>
> - *dma_handle = virt_to_phys(ret);
> - if (!WARN_ON(!dev))
> - *dma_handle -= PFN_PHYS(dev->dma_pfn_offset);
> + *dma_handle = (dma_addr_t)phys;
> + if (!WARN_ON(!dev) && dev->dma_pfn_offset_map)
> + *dma_handle -= PFN_PHYS(
> + dma_pfn_offset_from_phys_addr(dev, phys));
>
> return ret_nocache;
> }
> @@ -50,8 +55,8 @@ void arch_dma_free(struct device *dev, size_t size, void
> *vaddr,
> unsigned long pfn = (dma_handle >> PAGE_SHIFT);
> int k;
>
> - if (!WARN_ON(!dev))
> - pfn += dev->dma_pfn_offset;
> + if (!WARN_ON(!dev) && dev->dma_pfn_offset_map)
> + pfn += dma_pfn_offset_from_dma_addr(dev, dma_handle);
>
> for (k = 0; k < (1 << order); k++)
> __free_pages(pfn_to_page(pfn + k), 0);
> diff --git a/arch/x86/pci/sta2x11-fixup.c b/arch/x86/pci/sta2x11-fixup.c
> index c313d784efab..4cdeca9f69b6 100644
> --- a/arch/x86/pci/sta2x11-fixup.c
> +++ b/arch/x86/pci/sta2x11-fixup.c
> @@ -12,6 +12,7 @@
> #include <linux/export.h>
> #include <linux/list.h>
> #include <linux/dma-direct.h>
> +#include <linux/dma-mapping.h>
> #include <asm/iommu.h>
>
> #define STA2X11_SWIOTLB_SIZE (4*1024*1024)
> @@ -133,7 +134,7 @@ static void sta2x11_map_ep(struct pci_dev *pdev)
> struct sta2x11_instance *instance = sta2x11_pdev_to_instance(pdev);
> struct device *dev = &pdev->dev;
> u32 amba_base, max_amba_addr;
> - int i;
> + int i, ret;
>
> if (!instance)
> return;
> @@ -141,7 +142,9 @@ static void sta2x11_map_ep(struct pci_dev *pdev)
> pci_read_config_dword(pdev, AHB_BASE(0), &amba_base);
> max_amba_addr = amba_base + STA2X11_AMBA_SIZE - 1;
>
> - dev->dma_pfn_offset = PFN_DOWN(-amba_base);
> + ret = attach_uniform_dma_pfn_offset(dev, PFN_DOWN(-amba_base));
> + if (ret)
> + dev_err(dev, "sta2x11: could not set PFN offset\n");
>
> dev->bus_dma_limit = max_amba_addr;
> pci_set_consistent_dma_mask(pdev, max_amba_addr);
> diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
> index 28a6b387e80e..153661ddc74b 100644
> --- a/drivers/acpi/arm64/iort.c
> +++ b/drivers/acpi/arm64/iort.c
> @@ -1142,8 +1142,9 @@ void iort_dma_setup(struct device *dev, u64 *dma_addr,
> u64 *dma_size)
> *dma_addr = dmaaddr;
> *dma_size = size;
>
> - dev->dma_pfn_offset = PFN_DOWN(offset);
> - dev_dbg(dev, "dma_pfn_offset(%#08llx)\n", offset);
> + ret = attach_uniform_dma_pfn_offset(dev, PFN_DOWN(offset));
> + dev_dbg(dev, "dma_pfn_offset(%#08llx)%s\n",
> + offset, ret ? " failed!" : "");
> }
>
> static void __init acpi_iort_register_irq(int hwirq, const char *name,
> diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.c
> b/drivers/gpu/drm/sun4i/sun4i_backend.c
> index 072ea113e6be..3d41dfc7d178 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_backend.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_backend.c
> @@ -11,6 +11,7 @@
> #include <linux/module.h>
> #include <linux/of_device.h>
> #include <linux/of_graph.h>
> +#include <linux/dma-mapping.h>
> #include <linux/platform_device.h>
> #include <linux/reset.h>
>
> @@ -786,7 +787,7 @@ static int sun4i_backend_bind(struct device *dev, struct
> device *master,
> const struct sun4i_backend_quirks *quirks;
> struct resource *res;
> void __iomem *regs;
> - int i, ret;
> + int i, ret = 0;
>
> backend = devm_kzalloc(dev, sizeof(*backend), GFP_KERNEL);
> if (!backend)
> @@ -812,7 +813,9 @@ static int sun4i_backend_bind(struct device *dev, struct
> device *master,
> * on our device since the RAM mapping is at 0 for the DMA bus,
> * unlike the CPU.
> */
> - drm->dev->dma_pfn_offset = PHYS_PFN_OFFSET;
> + ret = attach_uniform_dma_pfn_offset(dev, PHYS_PFN_OFFSET);
> + if (ret)
> + return ret;
> }
>
> backend->engine.node = dev->of_node;
> diff --git a/drivers/iommu/io-pgtable-arm.c b/drivers/iommu/io-pgtable-arm.c
> index 04fbd4bf0ff9..e9cc1c2d47cd 100644
> --- a/drivers/iommu/io-pgtable-arm.c
> +++ b/drivers/iommu/io-pgtable-arm.c
> @@ -754,7 +754,7 @@ arm_lpae_alloc_pgtable(struct io_pgtable_cfg *cfg)
> if (cfg->oas > ARM_LPAE_MAX_ADDR_BITS)
> return NULL;
>
> - if (!selftest_running && cfg->iommu_dev->dma_pfn_offset) {
> + if (!selftest_running && cfg->iommu_dev->dma_pfn_offset_map) {
> dev_err(cfg->iommu_dev, "Cannot accommodate DMA offset for IOMMU
> page tables\n");
> return NULL;
> }
> diff --git a/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c
> b/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c
> index eff34ded6305..7212da5e1076 100644
> --- a/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c
> +++ b/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c
> @@ -7,6 +7,7 @@
> */
>
> #include <linux/clk.h>
> +#include <linux/dma-mapping.h>
> #include <linux/interrupt.h>
> #include <linux/module.h>
> #include <linux/mutex.h>
> @@ -183,7 +184,9 @@ static int sun4i_csi_probe(struct platform_device *pdev)
> return ret;
> } else {
> #ifdef PHYS_PFN_OFFSET
> - csi->dev->dma_pfn_offset = PHYS_PFN_OFFSET;
> + ret = attach_uniform_dma_pfn_offset(dev, PHYS_PFN_OFFSET);
> + if (ret)
> + return ret;
> #endif
> }
>
> diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> index 055eb0b8e396..2d66d415b6c3 100644
> --- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> +++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> @@ -898,7 +898,10 @@ static int sun6i_csi_probe(struct platform_device *pdev)
>
> sdev->dev = &pdev->dev;
> /* The DMA bus has the memory mapped at 0 */
> - sdev->dev->dma_pfn_offset = PHYS_OFFSET >> PAGE_SHIFT;
> + ret = attach_uniform_dma_pfn_offset(sdev->dev,
> + PHYS_OFFSET >> PAGE_SHIFT);
> + if (ret)
> + return ret;
>
> ret = sun6i_csi_resource_request(sdev, pdev);
> if (ret)
> diff --git a/drivers/of/address.c b/drivers/of/address.c
> index 96d8cfb14a60..c89333b0a5fb 100644
> --- a/drivers/of/address.c
> +++ b/drivers/of/address.c
> @@ -918,6 +918,70 @@ void __iomem *of_io_request_and_map(struct device_node
> *np, int index,
> }
> EXPORT_SYMBOL(of_io_request_and_map);
>
> +static int attach_dma_pfn_offset_map(struct device *dev,
> + struct device_node *node, int num_ranges)
As with the previous review, please take this comment with a grain of salt.
I think there should be a clear split between what belongs to OF and what
belongs to the core device infrastructure.
OF's job should be to parse DT and provide a list/array of ranges, whereas the
core device infrastructure should provide an API to assign a list of
ranges/offset to a device.
As a concrete example, you're forcing devices like the sta2x11 to build with OF
support, which, being an Intel device, it's pretty odd. But I'm also thinking
of how will all this fit once an ACPI device wants to use it.
Expanding on this idea, once you have a split between the OF's and device core
roles, it transpires that of_dma_get_range()'s job should only be to provide
the ranges in a device understandable structure and of_dma_configre()'s to
actually assign the device's parameters. This would obsolete patch #7.
> +{
> + struct of_range_parser parser;
> + struct of_range range;
> + struct dma_pfn_offset_region *r;
> +
> + r = devm_kcalloc(dev, num_ranges + 1,
> + sizeof(struct dma_pfn_offset_region), GFP_KERNEL);
> + if (!r)
> + return -ENOMEM;
> + dev->dma_pfn_offset_map = r;
> + of_dma_range_parser_init(&parser, node);
> +
> + /*
> + * Record all info for DMA ranges array. We could
> + * just use the of_range struct, but if we did that it
> + * would require more calculations for phys_to_dma and
> + * dma_to_phys conversions.
> + */
> + for_each_of_range(&parser, &range) {
> + r->cpu_start = range.cpu_addr;
> + r->cpu_end = r->cpu_start + range.size - 1;
> + r->dma_start = range.bus_addr;
> + r->dma_end = r->dma_start + range.size - 1;
> + r->pfn_offset = PFN_DOWN(range.cpu_addr)
> + - PFN_DOWN(range.bus_addr);
> + r++;
> + }
> + return 0;
> +}
> +
> +
> +
> +/**
> + * attach_dma_pfn_offset - Assign scalar offset for all addresses.
> + * @dev: device pointer; only needed for a corner case.
That's a huge corner :P
> + * @dma_pfn_offset: offset to apply when converting from phys addr
> + * to dma addr and vice versa.
> + *
> + * It returns -ENOMEM if out of memory, otherwise 0.
> + */
> +int attach_uniform_dma_pfn_offset(struct device *dev, unsigned long
> pfn_offset)
As I say above, does this really belong to of/address.c?
> +{
> + struct dma_pfn_offset_region *r;
> +
> + if (!dev)
> + return -ENODEV;
> +
> + if (!pfn_offset)
> + return 0;
> +
> + r = devm_kcalloc(dev, 1, sizeof(struct dma_pfn_offset_region),
> + GFP_KERNEL);
> + if (!r)
> + return -ENOMEM;
I think you're missing this:
dev->dma_pfn_offset_map = r;
> +
> + r->uniform_offset = true;
> + r->pfn_offset = pfn_offset;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(attach_uniform_dma_pfn_offset);
> +
> /**
> * of_dma_get_range - Get DMA range info
> * @dev: device pointer; only needed for a corner case.
> @@ -933,7 +997,7 @@ EXPORT_SYMBOL(of_io_request_and_map);
> * CPU addr (phys_addr_t) : pna cells
> * size : nsize cells
> *
> - * It returns -ENODEV if "dma-ranges" property was not found
> + * It returns -ENODEV if !dev or "dma-ranges" property was not found
> * for this device in DT.
> */
> int of_dma_get_range(struct device *dev, struct device_node *np, u64
> *dma_addr,
> @@ -946,7 +1010,13 @@ int of_dma_get_range(struct device *dev, struct
> device_node *np, u64 *dma_addr,
> bool found_dma_ranges = false;
> struct of_range_parser parser;
> struct of_range range;
> + phys_addr_t cpu_start = ~(phys_addr_t)0;
> u64 dma_start = U64_MAX, dma_end = 0, dma_offset = 0;
> + bool dma_multi_pfn_offset = false;
> + int num_ranges = 0;
> +
> + if (!dev)
> + return -ENODEV;
Shouldn't this be part of patch #7?
Regards,
Nicolas
Attachment:
signature.asc
Description: This is a digitally signed message part
_______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
