Hi Tobias, On Mon, May 18, 2020 at 7:59 AM Tobias Baumann <017623705678@xxxxxxxxxxx> wrote: > > hi martin > > i activate your patch ; wlan works ; also with only edit GPIOX_11 wlan > works > > its now GPIO-402 out high ACTIVE_LOW ( 3.3V on pin12) great, thank you for doing the research! did you find out if GPIOAO_6 is needed at all? the 3.10 kernel enables it and sets it to HIGH. my understanding is that you didn't change this one so the output is still LOW. so I'm wondering if it is needed at all (I wouldn't be surprised if it was not needed, these 3.10 kernel .dts files seem to be copy&pasted from various vendors and do not necessarily reflect the actual hardware setup inside the box) > i also attached the performance infos Wlan0->Router and RAM->SDHC that's pretty good, great to see that it works fine for you :-) Martin _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
