Hi Sam, On Mon, Apr 27, 2020 at 10:00:44PM +0200, Sam Ravnborg wrote: > Hi Xin Ji > > On Mon, Apr 27, 2020 at 02:18:44PM +0800, Xin Ji wrote: > > The ANX7625 is an ultra-low power 4K Mobile HD Transmitter designed > > for portable device. It converts MIPI DSI/DPI to DisplayPort 1.3 4K. > > > > The ANX7625 can support both USB Type-C PD feature and MIPI DSI/DPI > > to DP feature. This driver only enabled MIPI DSI/DPI to DP feature. > > You are sending this patch in an interesting time for bridge drivers. > We are migrating to an approach where the individual brdge drivers > exposes operations and where the connector creation is now optional. > > Laurent Pinchart is the architect behind it - and the required > interfaces is well documented. > You may find inspiration in a patchset I sent today: > https://lore.kernel.org/dri-devel/20200427081850.17512-1-sam@xxxxxxxxxxxx/T/#t > This is not reviewed - so keep an eye out for feedback. > > It would be great to base this on top of drm-misc-next, as this is where > we will apply it eventually. > As it is now it will not build due to internal API changes. > > The driver looks well structured with nice coding. > > I am missing an explanation why the current analogix infrastructure > cannot be used. I have no clue but I just see other > drivers in same dir that benefits from the infrastructure. > So the questions seems relevant to be addressed. > > See a few more comments in the following, which you need to decide > what to follow and what to ignore. > I will make it obvious when something is a must to change, > if I find anything such. > > Sorry for providing such massive feedback on v8. > Please keep up the spirit and submit a v9 soon! > > Sam OK > > > > > Signed-off-by: Xin Ji <xji@xxxxxxxxxxxxxxxx> > > --- > > drivers/gpu/drm/bridge/Makefile | 2 +- > > drivers/gpu/drm/bridge/analogix/Kconfig | 6 + > > drivers/gpu/drm/bridge/analogix/Makefile | 1 + > > drivers/gpu/drm/bridge/analogix/anx7625.c | 2158 +++++++++++++++++++++++++++++ > > drivers/gpu/drm/bridge/analogix/anx7625.h | 410 ++++++ > > 5 files changed, 2576 insertions(+), 1 deletion(-) > > create mode 100644 drivers/gpu/drm/bridge/analogix/anx7625.c > > create mode 100644 drivers/gpu/drm/bridge/analogix/anx7625.h > > > > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile > > index 4934fcf..bcd388a 100644 > > --- a/drivers/gpu/drm/bridge/Makefile > > +++ b/drivers/gpu/drm/bridge/Makefile > > @@ -12,8 +12,8 @@ obj-$(CONFIG_DRM_SII9234) += sii9234.o > > obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o > > obj-$(CONFIG_DRM_TOSHIBA_TC358764) += tc358764.o > > obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o > > -obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/ > > obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/ > > obj-$(CONFIG_DRM_TI_SN65DSI86) += ti-sn65dsi86.o > > obj-$(CONFIG_DRM_TI_TFP410) += ti-tfp410.o > > +obj-y += analogix/ > > obj-y += synopsys/ > With this change we will always visit analogix/ > which will trigger build of too much i think. > Use: > obj-$(CONFIG_ANALOGIX_ANX7625) += analogix/ > like the other drivers do, if for nothing else then for consistency. I noticed that, the latest kernel used "obj-y += analogix/" > > > diff --git a/drivers/gpu/drm/bridge/analogix/Kconfig b/drivers/gpu/drm/bridge/analogix/Kconfig > > index e930ff9..b2f127e 100644 > > --- a/drivers/gpu/drm/bridge/analogix/Kconfig > > +++ b/drivers/gpu/drm/bridge/analogix/Kconfig > > @@ -2,3 +2,9 @@ > > config DRM_ANALOGIX_DP > > tristate > > depends on DRM > > + > > +config ANALOGIX_ANX7625 > > + tristate "Analogix MIPI to DP interface support" > > + help > > + ANX7625 is an ultra-low power 4K mobile HD transmitter designed > > + for portable devices. It converts MIPI/DPI to DisplayPort1.3 4K. > > diff --git a/drivers/gpu/drm/bridge/analogix/Makefile b/drivers/gpu/drm/bridge/analogix/Makefile > > index fdbf3fd..8a52867 100644 > > --- a/drivers/gpu/drm/bridge/analogix/Makefile > > +++ b/drivers/gpu/drm/bridge/analogix/Makefile > > @@ -1,3 +1,4 @@ > > # SPDX-License-Identifier: GPL-2.0-only > > +obj-$(CONFIG_ANALOGIX_ANX7625) += anx7625.o > > analogix_dp-objs := analogix_dp_core.o analogix_dp_reg.o > > obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix_dp.o > > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c > > new file mode 100644 > > index 0000000..fff7a49 > > --- /dev/null > > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c > > @@ -0,0 +1,2158 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright(c) 2016, Analogix Semiconductor. All rights reserved. > 2020? OK > > > + * > > + */ > > +#include <linux/extcon.h> > > +#include <linux/gcd.h> > > +#include <linux/gpio/consumer.h> > > +#include <linux/i2c.h> > > +#include <linux/interrupt.h> > > +#include <linux/iopoll.h> > > +#include <linux/kernel.h> > > +#include <linux/module.h> > > +#include <linux/mutex.h> > > +#include <linux/slab.h> > > +#include <linux/types.h> > > +#include <linux/workqueue.h> > > + > > +#include <linux/of_gpio.h> > > +#include <linux/of_graph.h> > > +#include <linux/of_platform.h> > > + > > +#include <drm/drm_atomic_helper.h> > > +#include <drm/drm_bridge.h> > > +#include <drm/drm_crtc_helper.h> > > +#include <drm/drm_dp_helper.h> > > +#include <drm/drm_edid.h> > > +#include <drm/drm_mipi_dsi.h> > > +#include <drm/drm_panel.h> > > +#include <drm/drm_print.h> > > +#include <drm/drm_probe_helper.h> > > + > > +#include <video/display_timing.h> > > + > > +#include "anx7625.h" > > + > > +/* > > + * there is a sync issue while access I2C register between AP(CPU) and > > + * internal firmware(OCM), to avoid the race condition, AP should access > > + * the reserved slave address before slave address occurs changes. > > + */ > Nit - start comments with capital letter > If this is a general thing I will not repeat this comment. OK > > > +static int i2c_access_workaround(struct anx7625_data *ctx, > > + struct i2c_client *client) > > +{ > > + u8 offset; > > + struct device *dev = &client->dev; > > + int ret; > > + > > + if (client == ctx->last_client) > > + return 0; > > + > > + ctx->last_client = client; > > + > > + if (client == ctx->i2c.tcpc_client) > > + offset = RSVD_00_ADDR; > > + else if (client == ctx->i2c.tx_p0_client) > > + offset = RSVD_D1_ADDR; > > + else if (client == ctx->i2c.tx_p1_client) > > + offset = RSVD_60_ADDR; > > + else if (client == ctx->i2c.rx_p0_client) > > + offset = RSVD_39_ADDR; > > + else if (client == ctx->i2c.rx_p1_client) > > + offset = RSVD_7F_ADDR; > > + else > > + offset = RSVD_00_ADDR; > > + > > + ret = i2c_smbus_write_byte_data(client, offset, 0x00); > > + if (ret < 0) > > + DRM_DEV_ERROR(dev, > > + "failed to access i2c id=%x\n:%x", > > + client->addr, offset); > > + > > + return ret; > > +} > > + > > +static int anx7625_reg_read(struct anx7625_data *ctx, > > + struct i2c_client *client, u8 reg_addr) > > +{ > > + int ret; > > + struct device *dev = &client->dev; > > + > > + i2c_access_workaround(ctx, client); > > + > > + ret = i2c_smbus_read_byte_data(client, reg_addr); > > + if (ret < 0) > > + DRM_DEV_ERROR(dev, "read i2c failed id=%x:%x\n", > > + client->addr, reg_addr); > > + > > + return ret; > > +} > > + > > +static int anx7625_reg_block_read(struct anx7625_data *ctx, > > + struct i2c_client *client, > > + u8 reg_addr, u8 len, u8 *buf) > > +{ > > + int ret; > > + struct device *dev = &client->dev; > > + > > + i2c_access_workaround(ctx, client); > > + > > + ret = i2c_smbus_read_i2c_block_data(client, reg_addr, len, buf); > > + if (ret < 0) > > + DRM_DEV_ERROR(dev, "read i2c block failed id=%x:%x\n", > > + client->addr, reg_addr); > > + > > + return ret; > > +} > > + > > +static int anx7625_reg_write(struct anx7625_data *ctx, > > + struct i2c_client *client, > > + u8 reg_addr, u8 reg_val) > > +{ > > + int ret; > > + struct device *dev = &client->dev; > > + > > + i2c_access_workaround(ctx, client); > > + > > + ret = i2c_smbus_write_byte_data(client, reg_addr, reg_val); > > + > > + if (ret < 0) > > + DRM_DEV_ERROR(dev, "failed to write i2c id=%x\n:%x", > > + client->addr, reg_addr); > > + > > + return ret; > > +} > > + > > +static int anx7625_write_or(struct anx7625_data *ctx, > > + struct i2c_client *client, > > + u8 offset, u8 mask) > > +{ > > + int val; > > + > > + val = anx7625_reg_read(ctx, client, offset); > > + if (val < 0) > > + return val; > > + > > + return anx7625_reg_write(ctx, client, offset, (val | (mask))); > > +} > > + > > +static int anx7625_write_and(struct anx7625_data *ctx, > > + struct i2c_client *client, > > + u8 offset, u8 mask) > > +{ > > + int val; > > + > > + val = anx7625_reg_read(ctx, client, offset); > > + if (val < 0) > > + return val; > > + > > + return anx7625_reg_write(ctx, client, offset, (val & (mask))); > > +} > > + > > +static int anx7625_write_and_or(struct anx7625_data *ctx, > > + struct i2c_client *client, > > + u8 offset, u8 and_mask, u8 or_mask) > > +{ > > + int val; > > + > > + val = anx7625_reg_read(ctx, client, offset); > > + if (val < 0) > > + return val; > > + > > + return anx7625_reg_write(ctx, client, > > + offset, (val & and_mask) | (or_mask)); > > +} > > + > > +static int anx7625_config_bit_matrix(struct anx7625_data *ctx) > > +{ > > + int i, ret; > > + > > + ret = anx7625_reg_write(ctx, ctx->i2c.tx_p2_client, > > + AUDIO_CONTROL_REGISTER, 0x80); > > + for (i = 0; i < 13; i++) > > + ret |= anx7625_reg_write(ctx, ctx->i2c.tx_p2_client, > > + VIDEO_BIT_MATRIX_12 + i, > > + 0x18 + i); > > + > > + return ret; > > +} > > + > > +static int anx7625_read_ctrl_status_p0(struct anx7625_data *ctx) > > +{ > > + return anx7625_reg_read(ctx, ctx->i2c.rx_p0_client, AP_AUX_CTRL_STATUS); > > +} > > + > > +static int wait_aux_op_finish(struct anx7625_data *ctx) > > +{ > > + int val; > > + int ret; > > + struct device *dev = &ctx->client->dev; > > + > > + ret = readx_poll_timeout(anx7625_read_ctrl_status_p0, > > + ctx, val, > > + (!(val & AP_AUX_CTRL_OP_EN) || (val < 0)), > > + 2000, > > + 2000 * 150); > > + if (ret) { > > + DRM_DEV_ERROR(dev, "aux operation failed!\n"); > > + return -EIO; > > + } > > + > > + val = anx7625_reg_read(ctx, ctx->i2c.rx_p0_client, > > + AP_AUX_CTRL_STATUS); > > + if (val < 0 || (val & 0x0F)) { > > + DRM_DEV_ERROR(dev, "aux status %02x\n", val); > > + val = -EIO; > > + } > > + > > + return val; > > +} > > + > > +static int anx7625_video_mute_control(struct anx7625_data *ctx, > > + u8 status) > > +{ > > + int ret; > > + > > + if (status) { /* mute on */ > > + /* set mute flag */ > > + ret = anx7625_write_or(ctx, ctx->i2c.rx_p0_client, > > + AP_AV_STATUS, AP_MIPI_MUTE); > > + /* clear mipi RX en */ > > + ret |= anx7625_write_and(ctx, ctx->i2c.rx_p0_client, > > + AP_AV_STATUS, (u8)~AP_MIPI_RX_EN); > > + } else { /* mute off */ > > + /* clear mute flag */ > > + ret = anx7625_write_and(ctx, ctx->i2c.rx_p0_client, > > + AP_AV_STATUS, (u8)~AP_MIPI_MUTE); > > + /* set MIPI RX EN */ > > + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p0_client, > > + AP_AV_STATUS, AP_MIPI_RX_EN); > > + } > > + > > + return ret; > > +} > > + > > +static int anx7625_config_audio_input(struct anx7625_data *ctx) > > +{ > > + int ret; > > + > > + /* channel num */ > > + ret = anx7625_reg_write(ctx, ctx->i2c.tx_p2_client, > > + AUDIO_CHANNEL_STATUS_6, I2S_CH_2 << 5); > > + /* layout */ > > + /* as I2S channel is 2, no need to set layout */ > > + > > + /* FS */ > > + ret |= anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client, > > + AUDIO_CHANNEL_STATUS_4, > > + 0xf0, AUDIO_FS_48K); > > + /* word length */ > > + ret |= anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client, > > + AUDIO_CHANNEL_STATUS_5, > > + 0xf0, AUDIO_W_LEN_24_24MAX); > > + /* I2S */ > > + ret |= anx7625_write_or(ctx, ctx->i2c.tx_p2_client, > > + AUDIO_CHANNEL_STATUS_6, I2S_SLAVE_MODE); > > + ret |= anx7625_write_and(ctx, ctx->i2c.tx_p2_client, > > + AUDIO_CONTROL_REGISTER, ~TDM_TIMING_MODE); > > + /* audio change flag */ > > + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p0_client, > > + AP_AV_STATUS, AP_AUDIO_CHG); > > + > > + if (ret < 0) > > + DRM_ERROR("failed to config audio.\n"); > > + > > + return ret; > > +} > > + > > +/* reduction of fraction a/b */ > > +static void anx7625_reduction_of_a_fraction(unsigned long *a, unsigned long *b) > > +{ > > + unsigned long gcd_num; > > + unsigned long tmp_a, tmp_b; > > + u32 i = 1; > > + > > + gcd_num = gcd(*a, *b); > > + *a /= gcd_num; > > + *b /= gcd_num; > > + > > + tmp_a = *a; > > + tmp_b = *b; > > + > > + while ((*a > MAX_UNSIGNED_24BIT) || (*b > MAX_UNSIGNED_24BIT)) { > > + i++; > > + *a = tmp_a / i; > > + *b = tmp_b / i; > > + } > > + > > + /* > > + * in the end, make a, b larger to have higher ODFC PLL > > + * output frequency accuracy > > + */ > > + while ((*a < MAX_UNSIGNED_24BIT) && (*b < MAX_UNSIGNED_24BIT)) { > > + *a <<= 1; > > + *b <<= 1; > > + } > > + > > + *a >>= 1; > > + *b >>= 1; > > +} > > + > > +static int anx7625_calculate_m_n(u32 pixelclock, > > + unsigned long *m, > > + unsigned long *n, > > + u8 *post_divider) > > +{ > > + if (pixelclock > PLL_OUT_FREQ_ABS_MAX / POST_DIVIDER_MIN) { > > + /* pixel clock frequency is too high */ > > + DRM_ERROR("pixelclock too high, act(%d), maximum(%lu)\n", > > + pixelclock, > > + PLL_OUT_FREQ_ABS_MAX / POST_DIVIDER_MIN); > > + return -EINVAL; > > + } > > + > > + if (pixelclock < PLL_OUT_FREQ_ABS_MIN / POST_DIVIDER_MAX) { > > + /* pixel clock frequency is too low */ > > + DRM_ERROR("pixelclock too low, act(%d), maximum(%lu)\n", > > + pixelclock, > > + PLL_OUT_FREQ_ABS_MIN / POST_DIVIDER_MAX); > > + return -EINVAL; > > + } > > + > > + for (*post_divider = 1; > > + pixelclock < (PLL_OUT_FREQ_MIN / (*post_divider));) > > + *post_divider += 1; > > + > > + if (*post_divider > POST_DIVIDER_MAX) { > > + for (*post_divider = 1; > > + (pixelclock < > > + (PLL_OUT_FREQ_ABS_MIN / (*post_divider)));) > > + *post_divider += 1; > > + > > + if (*post_divider > POST_DIVIDER_MAX) { > > + DRM_ERROR("cannot find property post_divider(%d)\n", > > + *post_divider); > > + return -EDOM; > > + } > > + } > > + > > + /* patch to improve the accuracy */ > > + if (*post_divider == 7) { > > + /* 27,000,000 is not divisible by 7 */ > > + *post_divider = 8; > > + } else if (*post_divider == 11) { > > + /* 27,000,000 is not divisible by 11 */ > > + *post_divider = 12; > > + } else if ((*post_divider == 13) || (*post_divider == 14)) { > > + /*27,000,000 is not divisible by 13 or 14*/ > > + *post_divider = 15; > > + } > > + > > + if (pixelclock * (*post_divider) > PLL_OUT_FREQ_ABS_MAX) { > > + DRM_ERROR("act clock(%u) large than maximum(%lu)\n", > > + pixelclock * (*post_divider), > > + PLL_OUT_FREQ_ABS_MAX); > > + return -EDOM; > > + } > > + > > + *m = pixelclock; > > + *n = XTAL_FRQ / (*post_divider); > > + > > + anx7625_reduction_of_a_fraction(m, n); > > + > > + return 0; > > +} > > + > > +static int anx7625_odfc_config(struct anx7625_data *ctx, > > + u8 post_divider) > > +{ > > + int ret; > > + > > + /* config input reference clock frequency 27MHz/19.2MHz */ > > + ret = anx7625_write_and(ctx, ctx->i2c.rx_p1_client, MIPI_DIGITAL_PLL_16, > > + ~(REF_CLK_27000KHZ << MIPI_FREF_D_IND)); > > + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, MIPI_DIGITAL_PLL_16, > > + (REF_CLK_27000KHZ << MIPI_FREF_D_IND)); > > + /* post divider */ > > + ret |= anx7625_write_and(ctx, ctx->i2c.rx_p1_client, > > + MIPI_DIGITAL_PLL_8, 0x0f); > > + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, MIPI_DIGITAL_PLL_8, > > + post_divider << 4); > > + > > + /* add patch for MIS2-125 (5pcs ANX7625 fail ATE MBIST test) */ > > + ret |= anx7625_write_and(ctx, ctx->i2c.rx_p1_client, MIPI_DIGITAL_PLL_7, > > + ~MIPI_PLL_VCO_TUNE_REG_VAL); > > + > > + /* reset ODFC PLL */ > > + ret |= anx7625_write_and(ctx, ctx->i2c.rx_p1_client, MIPI_DIGITAL_PLL_7, > > + ~MIPI_PLL_RESET_N); > > + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, MIPI_DIGITAL_PLL_7, > > + MIPI_PLL_RESET_N); > > + > > + if (ret < 0) > > + DRM_ERROR("IO error.\n"); > > + > > + return ret; > > +} > > + > > +static int anx7625_dsi_video_timing_config(struct anx7625_data *ctx) > > +{ > > + struct device *dev = &ctx->client->dev; > > + unsigned long m, n; > > + u16 htotal; > > + int ret; > > + u8 post_divider = 0; > > + > > + ret = anx7625_calculate_m_n(ctx->dt.pixelclock.min * 1000, > > + &m, &n, &post_divider); > > + > > + if (ret) { > > + DRM_ERROR("cannot get property m n value.\n"); > > + return ret; > > + } > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "compute M(%lu), N(%lu), divider(%d).\n", > > + m, n, post_divider); > > + > > + /* configure pixel clock */ > > + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, PIXEL_CLOCK_L, > > + (ctx->dt.pixelclock.min / 1000) & 0xFF); > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, PIXEL_CLOCK_H, > > + (ctx->dt.pixelclock.min / 1000) >> 8); > > + /* lane count */ > > + ret |= anx7625_write_and(ctx, ctx->i2c.rx_p1_client, > > + MIPI_LANE_CTRL_0, 0xfc); > > + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, > > + MIPI_LANE_CTRL_0, 3); > > + > > + /* Htotal */ > > + htotal = ctx->dt.hactive.min + ctx->dt.hfront_porch.min + > > + ctx->dt.hback_porch.min + ctx->dt.hsync_len.min; > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client, > > + HORIZONTAL_TOTAL_PIXELS_L, htotal & 0xFF); > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client, > > + HORIZONTAL_TOTAL_PIXELS_H, htotal >> 8); > > + /* Hactive */ > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client, > > + HORIZONTAL_ACTIVE_PIXELS_L, ctx->dt.hactive.min & 0xFF); > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client, > > + HORIZONTAL_ACTIVE_PIXELS_H, ctx->dt.hactive.min >> 8); > > + /* HFP */ > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client, > > + HORIZONTAL_FRONT_PORCH_L, ctx->dt.hfront_porch.min); > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client, > > + HORIZONTAL_FRONT_PORCH_H, > > + ctx->dt.hfront_porch.min >> 8); > > + /* HWS */ > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client, > > + HORIZONTAL_SYNC_WIDTH_L, ctx->dt.hsync_len.min); > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client, > > + HORIZONTAL_SYNC_WIDTH_H, ctx->dt.hsync_len.min >> 8); > > + /* HBP */ > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client, > > + HORIZONTAL_BACK_PORCH_L, ctx->dt.hback_porch.min); > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client, > > + HORIZONTAL_BACK_PORCH_H, ctx->dt.hback_porch.min >> 8); > > + /* Vactive */ > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client, ACTIVE_LINES_L, > > + ctx->dt.vactive.min); > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client, ACTIVE_LINES_H, > > + ctx->dt.vactive.min >> 8); > > + /* VFP */ > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client, > > + VERTICAL_FRONT_PORCH, ctx->dt.vfront_porch.min); > > + /* VWS */ > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client, > > + VERTICAL_SYNC_WIDTH, ctx->dt.vsync_len.min); > > + /* VBP */ > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client, > > + VERTICAL_BACK_PORCH, ctx->dt.vback_porch.min); > > + /* M value */ > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client, > > + MIPI_PLL_M_NUM_23_16, (m >> 16) & 0xff); > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client, > > + MIPI_PLL_M_NUM_15_8, (m >> 8) & 0xff); > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client, > > + MIPI_PLL_M_NUM_7_0, (m & 0xff)); > > + /* N value */ > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client, > > + MIPI_PLL_N_NUM_23_16, (n >> 16) & 0xff); > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client, > > + MIPI_PLL_N_NUM_15_8, (n >> 8) & 0xff); > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client, MIPI_PLL_N_NUM_7_0, > > + (n & 0xff)); > > + /* diff */ > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client, > > + MIPI_DIGITAL_ADJ_1, 0x3D); > > + > > + ret |= anx7625_odfc_config(ctx, post_divider - 1); > > + > > + if (ret < 0) > > + DRM_ERROR("mipi dsi setup IO error.\n"); > > + > > + return ret; > > +} > > + > > +static int anx7625_swap_dsi_lane3(struct anx7625_data *ctx) > > +{ > > + int val; > > + > > + /* swap MIPI-DSI data lane 3 P and N */ > > + val = anx7625_reg_read(ctx, ctx->i2c.rx_p1_client, MIPI_SWAP); > > + if (val < 0) { > > + DRM_ERROR("IO error : access MIPI_SWAP.\n"); > > + return -EIO; > > + } > > + > > + val |= (1 << MIPI_SWAP_CH3); > > + return anx7625_reg_write(ctx, ctx->i2c.rx_p1_client, MIPI_SWAP, val); > > +} > > + > > +static int anx7625_api_dsi_config(struct anx7625_data *ctx) > > + > > +{ > > + int val, ret; > > + > > + /* swap MIPI-DSI data lane 3 P and N */ > > + ret = anx7625_swap_dsi_lane3(ctx); > > + if (ret < 0) { > > + DRM_ERROR("IO error : swap dsi lane 3 failed.\n"); > > + return ret; > > + } > > + > > + /* DSI clock settings */ > > + val = (0 << MIPI_HS_PWD_CLK) | > > + (0 << MIPI_HS_RT_CLK) | > > + (0 << MIPI_PD_CLK) | > > + (1 << MIPI_CLK_RT_MANUAL_PD_EN) | > > + (1 << MIPI_CLK_HS_MANUAL_PD_EN) | > > + (0 << MIPI_CLK_DET_DET_BYPASS) | > > + (0 << MIPI_CLK_MISS_CTRL) | > > + (0 << MIPI_PD_LPTX_CH_MANUAL_PD_EN); > > + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p1_client, > > + MIPI_PHY_CONTROL_3, val); > > + > > + /* > > + * Decreased HS prepare timing delay from 160ns to 80ns work with > > + * a) Dragon board 810 series (Qualcomm AP) > > + * b) Moving Pixel DSI source (PG3A pattern generator + > > + * P332 D-PHY Probe) default D-PHY timing > > + * 5ns/step > > + */ > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client, > > + MIPI_TIME_HS_PRPR, 0x10); > > + > > + /* enable DSI mode*/ > > + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, MIPI_DIGITAL_PLL_18, > > + SELECT_DSI << MIPI_DPI_SELECT); > > + > > + ret |= anx7625_dsi_video_timing_config(ctx); > > + if (ret < 0) { > > + DRM_ERROR("dsi video timing config failed\n"); > > + return ret; > > + } > > + > > + /* toggle m, n ready */ > > + ret = anx7625_write_and(ctx, ctx->i2c.rx_p1_client, MIPI_DIGITAL_PLL_6, > > + ~(MIPI_M_NUM_READY | MIPI_N_NUM_READY)); > > + usleep_range(1000, 1100); > > + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, MIPI_DIGITAL_PLL_6, > > + MIPI_M_NUM_READY | MIPI_N_NUM_READY); > > + > > + /* configure integer stable register */ > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client, > > + MIPI_VIDEO_STABLE_CNT, 0x02); > > + /* power on MIPI RX */ > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client, > > + MIPI_LANE_CTRL_10, 0x00); > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client, > > + MIPI_LANE_CTRL_10, 0x80); > > + > > + if (ret < 0) > > + DRM_ERROR("IO error : mipi dsi enable init failed.\n"); > > + > > + return ret; > > +} > > + > > +static int anx7625_dsi_config(struct anx7625_data *ctx) > > +{ > > + struct device *dev = &ctx->client->dev; > > + int ret; > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "config dsi.\n"); > > + > > + /* DSC disable */ > > + ret = anx7625_write_and(ctx, ctx->i2c.rx_p0_client, > > + R_DSC_CTRL_0, ~DSC_EN); > > + > > + ret |= anx7625_api_dsi_config(ctx); > > + > > + if (ret < 0) { > > + DRM_ERROR("IO error : api dsi config error.\n"); > > + return ret; > > + } > > + > > + /* set MIPI RX EN */ > > + ret = anx7625_write_or(ctx, ctx->i2c.rx_p0_client, > > + AP_AV_STATUS, AP_MIPI_RX_EN); > > + /* clear mute flag */ > > + ret |= anx7625_write_and(ctx, ctx->i2c.rx_p0_client, > > + AP_AV_STATUS, (u8)~AP_MIPI_MUTE); > > + if (ret < 0) > > + DRM_ERROR("IO error : enable mipi rx failed.\n"); > > + else > > + DRM_DEV_DEBUG_DRIVER(dev, "success to config DSI\n"); > > + > > + return ret; > > +} > > + > > +static int anx7625_api_dpi_config(struct anx7625_data *ctx) > > +{ > > + u16 freq = ctx->dt.pixelclock.min / 1000; > > + int ret; > > + > > + /* configure pixel clock */ > > + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, > > + PIXEL_CLOCK_L, freq & 0xFF); > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, > > + PIXEL_CLOCK_H, (freq >> 8)); > > + > > + /* set DPI mode */ > > + /* set to DPI PLL module sel */ > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client, > > + MIPI_DIGITAL_PLL_9, 0x20); > > + /* power down MIPI */ > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client, > > + MIPI_LANE_CTRL_10, 0x08); > > + /* enable DPI mode */ > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client, > > + MIPI_DIGITAL_PLL_18, 0x1C); > > + /* set first edge */ > > + ret |= anx7625_reg_write(ctx, ctx->i2c.tx_p2_client, > > + VIDEO_CONTROL_0, 0x05); > > + if (ret < 0) > > + DRM_ERROR("IO error : dpi phy set failed.\n"); > > + > > + return ret; > > +} > > + > > +static int anx7625_dpi_config(struct anx7625_data *ctx) > > +{ > > + struct device *dev = &ctx->client->dev; > > + int ret; > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "config dpi\n"); > > + > > + /* DSC disable */ > > + ret = anx7625_write_and(ctx, ctx->i2c.rx_p0_client, > > + R_DSC_CTRL_0, ~DSC_EN); > > + if (ret < 0) { > > + DRM_ERROR("IO error : disable dsc failed.\n"); > > + return ret; > > + } > > + > > + ret = anx7625_config_bit_matrix(ctx); > > + if (ret < 0) { > > + DRM_ERROR("config bit matrix failed.\n"); > > + return ret; > > + } > > + > > + ret = anx7625_api_dpi_config(ctx); > > + if (ret < 0) { > > + DRM_ERROR("mipi phy(dpi) setup failed.\n"); > > + return ret; > > + } > > + > > + /* set MIPI RX EN */ > > + ret = anx7625_write_or(ctx, ctx->i2c.rx_p0_client, > > + AP_AV_STATUS, AP_MIPI_RX_EN); > > + /* clear mute flag */ > > + ret |= anx7625_write_and(ctx, ctx->i2c.rx_p0_client, > > + AP_AV_STATUS, (u8)~AP_MIPI_MUTE); > > + if (ret < 0) > > + DRM_ERROR("IO error : enable mipi rx failed.\n"); > > + > > + return ret; > > +} > > + > > +static void anx7625_dp_start(struct anx7625_data *ctx) > > +{ > > + int ret; > > + > > + if (!ctx->display_timing_valid) { > > + DRM_ERROR("mipi drm haven't set display timing yet.\n"); > > + return; > > + } > > + > > + anx7625_config_audio_input(ctx); > > + > > + if (ctx->pdata.dsi_supported) > > + ret = anx7625_dsi_config(ctx); > > + else > > + ret = anx7625_dpi_config(ctx); > > + > > + if (ret < 0) > > + DRM_ERROR("MIPI phy setup error.\n"); > > +} > > + > > +static void anx7625_dp_stop(struct anx7625_data *ctx) > > +{ > > + struct device *dev = &ctx->client->dev; > > + int ret; > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "stop dp output\n"); > > + > > + /* > > + * video disable: 0x72:08 bit 7 = 0; > > + * audio disable: 0x70:87 bit 0 = 0; > > + */ > > + ret = anx7625_write_and(ctx, ctx->i2c.tx_p0_client, 0x87, 0xfe); > > + ret |= anx7625_write_and(ctx, ctx->i2c.tx_p2_client, 0x08, 0x7f); > > + > > + ret |= anx7625_video_mute_control(ctx, 1); > > + if (ret < 0) > > + DRM_ERROR("IO error : mute video failed\n"); > DRM_DEV_ERROR()?? > This is just a random place I noted this - there is opportunities for > using the _DEV_ variant in most places where DRM_ERROR() is used today. > struct device *dev = &ctx->client->dev; > Will give you dev whenever you have a anx7625_data*, > so really no excuses not to use a DEV_ variant I think. OK, I'll change it. > > > > +} > > + > > +static int sp_tx_rst_aux(struct anx7625_data *ctx) > > +{ > > + int ret; > > + > > + ret = anx7625_write_or(ctx, ctx->i2c.tx_p2_client, RST_CTRL2, > > + AUX_RST); > > + ret |= anx7625_write_and(ctx, ctx->i2c.tx_p2_client, RST_CTRL2, > > + ~AUX_RST); > > + return ret; > > +} > > + > > +static int sp_tx_aux_wr(struct anx7625_data *ctx, u8 offset) > > +{ > > + int ret; > > + > > + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, > > + AP_AUX_BUFF_START, offset); > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, > > + AP_AUX_COMMAND, 0x04); > > + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p0_client, > > + AP_AUX_CTRL_STATUS, AP_AUX_CTRL_OP_EN); > > + return (ret | wait_aux_op_finish(ctx)); > > +} > > + > > +static int sp_tx_aux_rd(struct anx7625_data *ctx, u8 len_cmd) > > +{ > > + int ret; > > + > > + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, > > + AP_AUX_COMMAND, len_cmd); > > + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p0_client, > > + AP_AUX_CTRL_STATUS, AP_AUX_CTRL_OP_EN); > > + return (ret | wait_aux_op_finish(ctx)); > > +} > > + > > +static int sp_tx_get_edid_block(struct anx7625_data *ctx) > > +{ > > + int c = 0; > > + struct device *dev = &ctx->client->dev; > > + > > + sp_tx_aux_wr(ctx, 0x7e); > > + sp_tx_aux_rd(ctx, 0x01); > > + c = anx7625_reg_read(ctx, ctx->i2c.rx_p0_client, AP_AUX_BUFF_START); > > + if (c < 0) { > > + DRM_ERROR("IO error : access AUX BUFF.\n"); > > + return -EIO; > > + } > > + > > + DRM_DEV_DEBUG_DRIVER(dev, " EDID Block = %d\n", c + 1); > > + > > + if (c > MAX_EDID_BLOCK) > > + c = 1; > > + > > + return c; > > +} > > + > > +static int edid_read(struct anx7625_data *ctx, > > + u8 offset, u8 *pblock_buf) > > +{ > > + int ret, cnt; > > + struct device *dev = &ctx->client->dev; > > + > > + for (cnt = 0; cnt <= EDID_TRY_CNT; cnt++) { > > + sp_tx_aux_wr(ctx, offset); > > + /* set I2C read com 0x01 mot = 0 and read 16 bytes */ > > + ret = sp_tx_aux_rd(ctx, 0xf1); > > + > > + if (ret) { > > + sp_tx_rst_aux(ctx); > > + DRM_DEV_DEBUG_DRIVER(dev, "edid read failed, reset!\n"); > > + } else { > > + ret = anx7625_reg_block_read(ctx, ctx->i2c.rx_p0_client, > > + AP_AUX_BUFF_START, > > + MAX_DPCD_BUFFER_SIZE, > > + pblock_buf); > > + if (ret > 0) > > + break; > > + } > > + } > > + > > + if (cnt > EDID_TRY_CNT) > > + return -EIO; > > + > > + return 0; > > +} > > + > > +static int segments_edid_read(struct anx7625_data *ctx, > > + u8 segment, u8 *buf, u8 offset) > > +{ > > + u8 cnt; > > + int ret; > > + struct device *dev = &ctx->client->dev; > > + > > + /* write address only */ > > + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, > > + AP_AUX_ADDR_7_0, 0x30); > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, > > + AP_AUX_COMMAND, 0x04); > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, > > + AP_AUX_CTRL_STATUS, > > + AP_AUX_CTRL_ADDRONLY | AP_AUX_CTRL_OP_EN); > > + > > + ret |= wait_aux_op_finish(ctx); > > + /* write segment address */ > > + ret |= sp_tx_aux_wr(ctx, segment); > > + /* data read */ > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, > > + AP_AUX_ADDR_7_0, 0x50); > > + if (ret) { > > + DRM_ERROR("IO error : aux initial failed.\n"); > > + return ret; > > + } > > + > > + for (cnt = 0; cnt <= EDID_TRY_CNT; cnt++) { > > + sp_tx_aux_wr(ctx, offset); > > + /* set I2C read com 0x01 mot = 0 and read 16 bytes */ > > + ret = sp_tx_aux_rd(ctx, 0xf1); > > + > > + if (ret) { > > + ret = sp_tx_rst_aux(ctx); > > + DRM_DEV_ERROR(dev, "segment read failed, reset!\n"); > > + } else { > > + ret = anx7625_reg_block_read(ctx, ctx->i2c.rx_p0_client, > > + AP_AUX_BUFF_START, > > + MAX_DPCD_BUFFER_SIZE, buf); > > + if (ret > 0) > > + break; > > + } > > + } > > + > > + if (cnt > EDID_TRY_CNT) > > + return -EIO; > > + > > + return 0; > > +} > > + > > +static int sp_tx_edid_read(struct anx7625_data *ctx, > > + u8 *pedid_blocks_buf) > > +{ > > + u8 offset, edid_pos; > > + int count, blocks_num; > > + u8 pblock_buf[MAX_DPCD_BUFFER_SIZE]; > > + u8 i, j; > > + u8 g_edid_break = 0; > > + int ret; > > + struct device *dev = &ctx->client->dev; > > + > > + /* address initial */ > > + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, > > + AP_AUX_ADDR_7_0, 0x50); > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, > > + AP_AUX_ADDR_15_8, 0); > > + ret |= anx7625_write_and(ctx, ctx->i2c.rx_p0_client, > > + AP_AUX_ADDR_19_16, 0xf0); > > + if (ret < 0) { > > + DRM_ERROR("access aux channel IO error.\n"); > > + return -EIO; > > + } > > + > > + blocks_num = sp_tx_get_edid_block(ctx); > > + if (blocks_num < 0) > > + return blocks_num; > > + > > + count = 0; > > + > > + do { > > + switch (count) { > > + case 0: > > + case 1: > > + for (i = 0; i < 8; i++) { > > + offset = (i + count * 8) * MAX_DPCD_BUFFER_SIZE; > > + g_edid_break = edid_read(ctx, offset, > > + pblock_buf); > > + > > + if (g_edid_break) > > + break; > > + > > + memcpy(&pedid_blocks_buf[offset], > > + pblock_buf, > > + MAX_DPCD_BUFFER_SIZE); > > + } > > + > > + break; > > + case 2: > > + offset = 0x00; > > + > > + for (j = 0; j < 8; j++) { > > + edid_pos = (j + count * 8) * > > + MAX_DPCD_BUFFER_SIZE; > > + > > + if (g_edid_break == 1) > > + break; > > + > > + segments_edid_read(ctx, count / 2, > > + pblock_buf, offset); > > + memcpy(&pedid_blocks_buf[edid_pos], > > + pblock_buf, > > + MAX_DPCD_BUFFER_SIZE); > > + offset = offset + 0x10; > > + } > > + > > + break; > > + case 3: > > + offset = 0x80; > > + > > + for (j = 0; j < 8; j++) { > > + edid_pos = (j + count * 8) * > > + MAX_DPCD_BUFFER_SIZE; > > + if (g_edid_break == 1) > > + break; > > + > > + segments_edid_read(ctx, count / 2, > > + pblock_buf, offset); > > + memcpy(&pedid_blocks_buf[edid_pos], > > + pblock_buf, > > + MAX_DPCD_BUFFER_SIZE); > > + offset = offset + 0x10; > > + } > > + > > + break; > > + default: > > + break; > > + } > > + > > + count++; > > + > > + } while (blocks_num >= count); > > + > > + /* check edid data */ > > + if (!drm_edid_is_valid((struct edid *)pedid_blocks_buf)) { > > + DRM_DEV_ERROR(dev, "WARNING! edid check failed!\n"); > > + return -EINVAL; > > + } > > + > > + /* reset aux channel */ > > + sp_tx_rst_aux(ctx); > > + > > + return (blocks_num + 1); > > +} > > + > > +static void anx7625_power_on(struct anx7625_data *ctx) > > +{ > > + struct device *dev = &ctx->client->dev; > > + > > + if (!ctx->pdata.low_power_mode) { > > + DRM_DEV_DEBUG_DRIVER(dev, "Anx7625 not low power mode!\n"); > > + return; > > + } > > + > > + /* power on pin enable */ > > + gpiod_set_value(ctx->pdata.gpio_p_on, 1); > > + usleep_range(10000, 11000); > > + /* power reset pin enable */ > > + gpiod_set_value(ctx->pdata.gpio_reset, 1); > > + usleep_range(10000, 11000); > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "Anx7625 power on !\n"); > There is already a device name in the logging so drop "Anx7625" from the > text. > At least relavent here and the logging above. OK > > > +} > > + > > +static void anx7625_power_standby(struct anx7625_data *ctx) > > +{ > > + struct device *dev = &ctx->client->dev; > > + > > + if (!ctx->pdata.low_power_mode) { > > + DRM_DEV_DEBUG_DRIVER(dev, "anx7625 not low power mode!\n"); > > + return; > > + } > > + > > + gpiod_set_value(ctx->pdata.gpio_reset, 0); > > + usleep_range(1000, 1100); > > + gpiod_set_value(ctx->pdata.gpio_p_on, 0); > > + usleep_range(1000, 1100); > > + DRM_DEV_DEBUG_DRIVER(dev, "anx7625 power down\n"); > > +} > > + > > +/* basic configurations of ANX7625 */ > > +static void anx7625_config(struct anx7625_data *ctx) > > +{ > > + anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, > > + XTAL_FRQ_SEL, XTAL_FRQ_27M); > > +} > > + > > +static void anx7625_disable_pd_protocol(struct anx7625_data *ctx) > > +{ > > + struct device *dev = &ctx->client->dev; > > + int ret; > > + > > + /* reset main ocm */ > > + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, 0x88, 0x40); > > + /* Disable PD */ > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, > > + AP_AV_STATUS, AP_DISABLE_PD); > > + /* release main ocm */ > > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, 0x88, 0x00); > > + > > + if (ret < 0) > > + DRM_DEV_DEBUG_DRIVER(dev, "disable PD feature failed.\n"); > > + else > > + DRM_DEV_DEBUG_DRIVER(dev, "disable PD feature succeeded.\n"); > > +} > > + > > +static void anx7625_power_on_init(struct anx7625_data *ctx) > > +{ > > + int retry_count, i; > > + int ret; > > + struct device *dev = &ctx->client->dev; > > + > > + for (retry_count = 0; retry_count < 3; retry_count++) { > > + anx7625_power_on(ctx); > > + anx7625_config(ctx); > > + > > + for (i = 0; i < OCM_LOADING_TIME; i++) { > Code in this for loop is a candidate for a helper function. I didn't find any helper function can be used, so I'll keep it. > > > + /* check interface workable */ > > + ret = anx7625_reg_read(ctx, ctx->i2c.rx_p0_client, > > + FLASH_LOAD_STA); > > + if (ret < 0) { > > + DRM_ERROR("IO error : access flash load.\n"); > > + return; > > + } > > + if ((ret & FLASH_LOAD_STA_CHK) == FLASH_LOAD_STA_CHK) { > > + anx7625_disable_pd_protocol(ctx); > > + DRM_DEV_DEBUG_DRIVER(dev, > > + "Firmware ver %02x%02x,", > > + anx7625_reg_read(ctx, > > + ctx->i2c.rx_p0_client, > > + OCM_FW_VERSION), > > + anx7625_reg_read(ctx, > > + ctx->i2c.rx_p0_client, > > + OCM_FW_REVERSION)); > > + DRM_DEV_DEBUG_DRIVER(dev, "Driver version %s\n", > > + ANX7625_DRV_VERSION); > > + > > + return; > > + } > > + usleep_range(1000, 1100); > > + } > > + anx7625_power_standby(ctx); > > + } > > +} > > + > > +static int anx7625_extcon_notifier(struct notifier_block *nb, > > + unsigned long event, void *ptr) > > +{ > > + struct anx7625_data *ctx = > > + container_of(nb, struct anx7625_data, event_nb); > > + > > + schedule_work(&ctx->extcon_wq); > > + return NOTIFY_DONE; > > +} > > + > > +static void anx7625_chip_control(struct anx7625_data *ctx, int state) > > +{ > > + struct device *dev = &ctx->client->dev; > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "before set, power_state(%d).\n", > > + atomic_read(&ctx->power_status)); > > + > > + if (!ctx->pdata.low_power_mode) > > + return; > > + > > + if (state) { > > + atomic_inc(&ctx->power_status); > > + if (atomic_read(&ctx->power_status) == 1) > > + anx7625_power_on_init(ctx); > > + } else { > > + if (atomic_read(&ctx->power_status)) { > > + atomic_dec(&ctx->power_status); > > + > > + if (atomic_read(&ctx->power_status) == 0) > > + anx7625_power_standby(ctx); > > + } > > + } > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "after set, power_state(%d).\n", > > + atomic_read(&ctx->power_status)); > > +} > > + > > +static void anx7625_extcon_work(struct work_struct *work) > > +{ > > + struct anx7625_data *ctx = > > + container_of(work, struct anx7625_data, extcon_wq); > > + int state = extcon_get_state(ctx->extcon, EXTCON_DISP_DP); > > + > > + mutex_lock(&ctx->lock); > > + anx7625_chip_control(ctx, state); > > + mutex_unlock(&ctx->lock); > I tried to follow the locking - but failed. > Could you check that locking seems correct. > > A standard bridge driver do not need locking, > but this is no small bridge driver so I do not imply that > locking is not needed. Only that I would like you > to check it again as I could not follow it. OK, it seems lock is not necessary, I'll remove it. > > > +} > > + > > +static int anx7625_extcon_notifier_init(struct anx7625_data *ctx) > > +{ > > + int ret; > > + struct device *dev = &ctx->client->dev; > > + > > + ctx->event_nb.notifier_call = anx7625_extcon_notifier; > > + INIT_WORK(&ctx->extcon_wq, anx7625_extcon_work); > > + ret = devm_extcon_register_notifier(&ctx->client->dev, ctx->extcon, > > + EXTCON_DISP_DP, &ctx->event_nb); > > + if (ret) { > > + DRM_DEV_ERROR(dev, "failed to register notifier for DP"); > > + return ret; > > + } > > + return 0; > > +} > > + > > +static void anx7625_init_gpio(struct anx7625_data *platform) > > +{ > > + struct device *dev = &platform->client->dev; > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "anx7625 init gpio\n"); > > + > > + /* gpio for chip power enable */ > > + platform->pdata.gpio_p_on = > > + devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW); > > + /* gpio for chip reset */ > > + platform->pdata.gpio_reset = > > + devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); > > + > > + if (platform->pdata.gpio_p_on && platform->pdata.gpio_reset) { > > + platform->pdata.low_power_mode = 1; > > + DRM_DEV_DEBUG_DRIVER(dev, "low power mode, pon %d, reset %d.\n", > > + desc_to_gpio(platform->pdata.gpio_p_on), > > + desc_to_gpio(platform->pdata.gpio_reset)); > > + } else { > > + platform->pdata.low_power_mode = 0; > > + DRM_DEV_DEBUG_DRIVER(dev, "not low power mode.\n"); > > + } > > +} > > + > > +static void anx7625_stop_dp_work(struct anx7625_data *ctx) > > +{ > > + ctx->hpd_status = 0; > > + ctx->hpd_high_cnt = 0; > > + ctx->display_timing_valid = 0; > > + > > + ctx->slimport_edid_p.edid_block_num = -1; > > + > > + if (ctx->pdata.low_power_mode == 0) > > + anx7625_disable_pd_protocol(ctx); > > +} > > + > > +static void anx7625_start_dp_work(struct anx7625_data *ctx) > > +{ > > + int ret; > > + struct device *dev = &ctx->client->dev; > > + > > + if (ctx->hpd_high_cnt >= 2) { > > + DRM_DEV_DEBUG_DRIVER(dev, "anx7625 filter useless HPD\n"); > > + return; > > + } > > + > > + ctx->hpd_high_cnt++; > > + > > + /* not support HDCP */ > > + ret = anx7625_write_and(ctx, ctx->i2c.rx_p1_client, 0xee, 0x9f); > > + > > + /* try auth flag */ > > + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xec, 0x10); > > + /* interrupt for DRM */ > > + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xff, 0x01); > > + if (ret < 0) > > + return; > > + > > + ret = anx7625_reg_read(ctx, ctx->i2c.rx_p1_client, 0x86); > > + if (ret < 0) > > + return; > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "Secure OCM version=%02x\n", ret); > > +} > > + > > +static int anx7625_read_hpd_status_p0(struct anx7625_data *ctx) > > +{ > > + return anx7625_reg_read(ctx, ctx->i2c.rx_p0_client, SYSTEM_STSTUS); > > +} > > + > > +static void anx7625_hpd_polling(struct anx7625_data *ctx) > > +{ > > + int ret, val; > > + struct device *dev = &ctx->client->dev; > > + > > + if (atomic_read(&ctx->power_status) != 1) { > > + DRM_DEV_DEBUG_DRIVER(dev, "No need to poling HPD status.\n"); > > + return; > > + } > > + > > + ret = readx_poll_timeout(anx7625_read_hpd_status_p0, > > + ctx, val, > > + ((val & HPD_STATUS) || (val < 0)), > > + 5000, > > + 5000 * 100); > > + if (ret) { > > + DRM_DEV_ERROR(dev, "HPD polling timeout!\n"); > > + } else { > > + DRM_DEV_DEBUG_DRIVER(dev, "HPD raise up.\n"); > > + anx7625_reg_write(ctx, ctx->i2c.tcpc_client, > > + INTR_ALERT_1, 0xFF); > > + anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, > > + INTERFACE_CHANGE_INT, 0); > > + } > > + > > + anx7625_start_dp_work(ctx); > > +} > > + > > +static void anx7625_disconnect_check(struct anx7625_data *ctx) > > +{ > > + if (atomic_read(&ctx->power_status) == 0) > > + anx7625_stop_dp_work(ctx); > > +} > > + > > +static void anx7625_low_power_mode_check(struct anx7625_data *ctx, > > + int state) > > +{ > > + struct device *dev = &ctx->client->dev; > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "low power mode check, state(%d).\n", state); > > + > > + if (ctx->pdata.low_power_mode) { > > + anx7625_chip_control(ctx, state); > > + if (state) > > + anx7625_hpd_polling(ctx); > > + else > > + anx7625_disconnect_check(ctx); > > + } > > +} > > + > > +static void dp_hpd_change_handler(struct anx7625_data *ctx, bool on) > > +{ > > + struct device *dev = &ctx->client->dev; > > + > > + /* hpd changed */ > > + DRM_DEV_DEBUG_DRIVER(dev, "dp_hpd_change_default_func: %d\n", > > + (u32)on); > > + > > + if (on == 0) { > > + DRM_DEV_DEBUG_DRIVER(dev, " HPD low\n"); > > + anx7625_stop_dp_work(ctx); > > + } else { > > + DRM_DEV_DEBUG_DRIVER(dev, " HPD high\n"); > > + anx7625_start_dp_work(ctx); > > + } > > + > > + ctx->hpd_status = 1; > > +} > > + > > +static int anx7625_hpd_change_detect(struct anx7625_data *ctx) > > +{ > > + int intr_vector, status; > > + struct device *dev = &ctx->client->dev; > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "power_status=%d\n", > > + (u32)atomic_read(&ctx->power_status)); > > + > > + status = anx7625_reg_write(ctx, ctx->i2c.tcpc_client, > > + INTR_ALERT_1, 0xFF); > > + if (status < 0) { > > + DRM_ERROR("IO error : clear alert register.\n"); > > + return status; > > + } > > + > > + intr_vector = anx7625_reg_read(ctx, ctx->i2c.rx_p0_client, > > + INTERFACE_CHANGE_INT); > > + if (intr_vector < 0) { > > + DRM_ERROR("IO error : access interrupt change register.\n"); > > + return intr_vector; > > + } > > + DRM_DEV_DEBUG_DRIVER(dev, "0x7e:0x44=%x\n", intr_vector); > > + status = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, > > + INTERFACE_CHANGE_INT, > > + intr_vector & (~intr_vector)); > > + if (status < 0) { > > + DRM_ERROR("IO error : clear interrupt change register.\n"); > > + return status; > > + } > > + > > + if (!(intr_vector & HPD_STATUS_CHANGE)) > > + return -ENOENT; > > + > > + status = anx7625_reg_read(ctx, ctx->i2c.rx_p0_client, > > + SYSTEM_STSTUS); > > + if (status < 0) { > > + DRM_ERROR("IO error : clear interrupt status.\n"); > > + return status; > > + } > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "0x7e:0x45=%x\n", status); > > + dp_hpd_change_handler(ctx, status & HPD_STATUS); > > + > > + return 0; > > +} > > + > > +static void anx7625_work_func(struct work_struct *work) > > +{ > > + int event; > > + struct anx7625_data *ctx = container_of(work, > > + struct anx7625_data, work); > > + > > + mutex_lock(&ctx->lock); > > + event = anx7625_hpd_change_detect(ctx); > > + mutex_unlock(&ctx->lock); > > + > > + if (event < 0) > > + return; > > + > > + if (ctx->bridge_attached) > > + drm_helper_hpd_irq_event(ctx->connector.dev); > > +} > > + > > +static irqreturn_t anx7625_intr_hpd_isr(int irq, void *data) > > +{ > > + struct anx7625_data *ctx = (struct anx7625_data *)data; > > + > > + if (atomic_read(&ctx->power_status) != 1) > > + return IRQ_NONE; > > + > > + queue_work(ctx->workqueue, &ctx->work); > > + > > + return IRQ_HANDLED; > > +} > > + > > +#ifdef CONFIG_OF > > > The driver needs OF - so let it "depends on OF" in Kconfig. > And then drop this conditional stuff. OK > > > +static int anx7625_parse_dt(struct device *dev, > > + struct anx7625_platform_data *pdata) > > +{ > > + struct device_node *np = dev->of_node; > > + struct device_node *panel_node, *out_ep; > > + > > + of_property_read_u32(dev->of_node, "panel_flags", > > + &pdata->panel_flags); > > + DRM_DEV_DEBUG_DRIVER(dev, "panel_flags : %d\n", pdata->panel_flags); > > No need for pdata->panel_flags as it is only used in this function. > Use a local variable. OK > > > + > > + if (pdata->panel_flags == 1) > > + pdata->internal_panel = 1; > > + else if (pdata->panel_flags == 2) > > + pdata->extcon_supported = 1; > > + DRM_DEV_DEBUG_DRIVER(dev, "%s support extcon, %s internal panel\n", > > + pdata->extcon_supported ? "" : "not", > > + pdata->internal_panel ? "has" : "no"); > > + > The way the internal panel - versus external connector is modelled > looks like it could use some of the abstractions used by other bridge > drivers. > > The connector_type shall for example for internal panels come > form the panel. > And use the panel bridge driver - see examples in patches I referenced > before. > > And external connectors may beneft from using the > display-connector bridge driver. I'm not familiar with it, the extcon interface is Google engineer give to me, I just follow their sample driver. If you think it is not good, I'll remove the extcon support. > > > + pdata->node.mipi_dsi_host_node = of_graph_get_remote_node(np, 0, 0); > > + if (pdata->node.mipi_dsi_host_node) { > > + of_node_put(pdata->node.mipi_dsi_host_node); > > + pdata->dsi_supported = 1; > > + DRM_DEV_DEBUG_DRIVER(dev, "found dsi host node.\n"); > > + } else { > > + pdata->node.mipi_dpi_host_node = > > + of_graph_get_remote_node(np, 1, 0); > > + > > + if (pdata->node.mipi_dpi_host_node) { > > + of_node_put(pdata->node.mipi_dpi_host_node); > > + DRM_DEV_DEBUG_DRIVER(dev, "found dpi host node.\n"); > > + } > > + } > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "dsi_supported : %d\n", pdata->dsi_supported); > > + > > + pdata->node.panel_node = of_graph_get_port_by_id(np, 2); > > + if (pdata->node.panel_node) { > > + of_node_put(pdata->node.panel_node); > > + out_ep = of_get_child_by_name(pdata->node.panel_node, > > + "endpoint"); > > + if (!out_ep) { > > + DRM_DEV_DEBUG_DRIVER(dev, "cannot get endpoint.\n"); > > + return -EPROBE_DEFER; > > + } > > + > > + panel_node = of_graph_get_remote_port_parent(out_ep); > > + of_node_put(out_ep); > > + > > + pdata->panel = of_drm_find_panel(panel_node); > > + DRM_DEV_DEBUG_DRIVER(dev, "get panel node.\n"); > > + of_node_put(panel_node); > > + if (IS_ERR_OR_NULL(pdata->panel)) > > + return -EPROBE_DEFER; > > + } else { > > + if (pdata->internal_panel) { > > + DRM_ERROR("failed to get internal panel.\n"); > > + return -EPROBE_DEFER; > > + } > > + } > > + > > + return 0; > > +} > > +#else > > +static int anx7625_parse_dt(struct device *dev, > > + struct anx7625_platform_data *pdata) > > +{ > > + return -ENODEV; > > +} > > +#endif > > + > > +static inline struct anx7625_data *connector_to_anx7625(struct drm_connector *c) > > +{ > > + return container_of(c, struct anx7625_data, connector); > > +} > > + > > +static inline struct anx7625_data *bridge_to_anx7625(struct drm_bridge *bridge) > > +{ > > + return container_of(bridge, struct anx7625_data, bridge); > > +} > > + > > +static void anx7625_post_disable(struct drm_bridge *bridge) > > +{ > > + struct anx7625_data *ctx = bridge_to_anx7625(bridge); > > + struct device *dev = &ctx->client->dev; > > + int ret; > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "post disable\n"); > > + > > + if (!ctx->pdata.panel) > > + return; > > + > > + ret = drm_panel_unprepare(ctx->pdata.panel); > > + if (ret) > > + DRM_ERROR("failed to unprepare panel: %d\n", ret); > > + else > > + DRM_DEV_DEBUG_DRIVER(dev, "backlight unprepared.\n"); > > + > > + atomic_set(&ctx->panel_power, 0); > > +} > > + > > +static void anx7625_pre_enable(struct drm_bridge *bridge) > > +{ > > + struct anx7625_data *ctx = bridge_to_anx7625(bridge); > > + struct device *dev = &ctx->client->dev; > > + int ret; > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "pre enable\n"); > > + > > + if (!ctx->pdata.panel) > > + return; > > + > > + ret = drm_panel_prepare(ctx->pdata.panel); > > + if (ret < 0) > > + DRM_ERROR("failed to prepare panel: %d\n", ret); > > + else > > + DRM_DEV_DEBUG_DRIVER(dev, "backlight prepared.\n"); > > + atomic_set(&ctx->panel_power, 1); > > +} > > + > > +static int anx7625_get_modes(struct drm_connector *connector) > > +{ > > + struct anx7625_data *ctx = connector_to_anx7625(connector); > > + int err, num_modes = 0; > > + int turn_off_flag = 0; > > + struct s_edid_data *p_edid = &ctx->slimport_edid_p; > > + struct device *dev = &ctx->client->dev; > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "drm get modes\n"); > > + > > + if (ctx->slimport_edid_p.edid_block_num > 0) > > + goto out; > > + > > + mutex_lock(&ctx->lock); > > + > > + if (ctx->pdata.panel && atomic_read(&ctx->panel_power) == 0) { > > + turn_off_flag = 1; > > + anx7625_pre_enable(&ctx->bridge); > > + } > > + > > + anx7625_low_power_mode_check(ctx, 1); > > + > > + p_edid->edid_block_num = sp_tx_edid_read(ctx, p_edid->edid_raw_data); > > + > > + err = -EIO; > > + if (p_edid->edid_block_num < 0) { > > + DRM_ERROR("Failed to read EDID.\n"); > > + goto fail; > > + } > > + > > + err = drm_connector_update_edid_property(connector, > > + (struct edid *) > > + &p_edid->edid_raw_data); > > + > > + if (err) > > + DRM_ERROR("Failed to update EDID property: %d\n", err); > > + > > +fail: > > + mutex_unlock(&ctx->lock); > > + anx7625_low_power_mode_check(ctx, 0); > > + if (ctx->pdata.panel && turn_off_flag == 1) > > + anx7625_post_disable(&ctx->bridge); > > + > > + if (err) > > + return err; > > + > > +out: > > + num_modes = drm_add_edid_modes(connector, > > + (struct edid *)&p_edid->edid_raw_data); > > + DRM_DEV_DEBUG_DRIVER(dev, "num_modes(%d)\n", num_modes); > > + > > + return num_modes; > > +} > > + > > +static enum drm_mode_status > > +anx7625_connector_mode_valid(struct drm_connector *connector, > > + struct drm_display_mode *mode) > > +{ > > + struct anx7625_data *ctx = connector_to_anx7625(connector); > > + struct device *dev = &ctx->client->dev; > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "drm modes valid verify\n"); > > + > > + if (mode->clock > SUPPORT_PIXEL_CLOCK) > > + return MODE_CLOCK_HIGH; > > + > > + return MODE_OK; > > +} > > + > > +static struct drm_connector_helper_funcs anx7625_connector_helper_funcs = { > > + .get_modes = anx7625_get_modes, > > + .mode_valid = anx7625_connector_mode_valid, > > +}; > > + > > +static enum drm_connector_status anx7625_detect(struct drm_connector *connector, > > + bool force) > > +{ > > + struct anx7625_data *ctx = connector_to_anx7625(connector); > > + struct device *dev = &ctx->client->dev; > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "drm detect\n"); > > + > > + if (ctx->pdata.internal_panel) > > + return connector_status_connected; > > + > > + if (!ctx->hpd_status) > > + return connector_status_disconnected; > > + > > + return connector_status_connected; > > +} > > + > > +static const struct drm_connector_funcs anx7625_connector_funcs = { > > + .fill_modes = drm_helper_probe_single_connector_modes, > > + .detect = anx7625_detect, > > + .destroy = drm_connector_cleanup, > > + .reset = drm_atomic_helper_connector_reset, > > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > > +}; > > + > > +static int anx7625_attach_dsi(struct anx7625_data *ctx) > > +{ > > + struct mipi_dsi_host *host; > > + struct mipi_dsi_device *dsi; > > + struct device_node *mipi_host_node; > > + struct device *dev = &ctx->client->dev; > > + const struct mipi_dsi_device_info info = { > > + .type = "anx7625", > > + .channel = 0, > > + .node = NULL, > > + }; > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "attach dsi\n"); > > + > > + if (ctx->pdata.dsi_supported) > > + mipi_host_node = ctx->pdata.node.mipi_dsi_host_node; > > + else > > + mipi_host_node = ctx->pdata.node.mipi_dpi_host_node; > > + > > + if (!mipi_host_node) { > > + DRM_ERROR("dsi host is not configured.\n"); > > + return -EINVAL; > > + } > > + > > + host = of_find_mipi_dsi_host_by_node(mipi_host_node); > > + if (!host) { > > + DRM_ERROR("failed to find dsi host.\n"); > > + return -EINVAL; > > + } > > + > > + dsi = mipi_dsi_device_register_full(host, &info); > > + if (IS_ERR(dsi)) { > > + DRM_ERROR("failed to create dsi device.\n"); > > + return -EINVAL; > > + } > > + > > + dsi->lanes = 4; > > + dsi->format = MIPI_DSI_FMT_RGB888; > > + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | > > + MIPI_DSI_MODE_VIDEO_SYNC_PULSE | > > + MIPI_DSI_MODE_EOT_PACKET | > > + MIPI_DSI_MODE_VIDEO_HSE; > > + > > + if (mipi_dsi_attach(dsi) < 0) { > > + DRM_ERROR("failed to attach dsi to host.\n"); > > + mipi_dsi_device_unregister(dsi); > > + return -EINVAL; > > + } > > + > > + ctx->dsi = dsi; > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "attach dsi succeeded.\n"); > > + > > + return 0; > > +} > > + > > +static void anx7625_bridge_detach(struct drm_bridge *bridge) > > +{ > > + struct anx7625_data *ctx = bridge_to_anx7625(bridge); > > + > > + if (ctx->dsi) { > > + mipi_dsi_detach(ctx->dsi); > > + mipi_dsi_device_unregister(ctx->dsi); > > + } > > + > > + if (ctx->bridge_attached) > > + drm_connector_unregister(&ctx->connector); > > +} > > + > > +static int anx7625_bridge_attach(struct drm_bridge *bridge) > > +{ > > + struct anx7625_data *ctx = bridge_to_anx7625(bridge); > > + int err; > > + struct device *dev = &ctx->client->dev; > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "drm attach\n"); > > + if (!bridge->encoder) { > > + DRM_ERROR("Parent encoder object not found"); > > + return -ENODEV; > > + } > > + > > + err = drm_connector_init(bridge->dev, &ctx->connector, > > + &anx7625_connector_funcs, > > + ctx->pdata.internal_panel ? > > + DRM_MODE_CONNECTOR_eDP : > > + DRM_MODE_CONNECTOR_DisplayPort); > > + if (err) { > > + DRM_ERROR("Failed to initialize connector: %d\n", err); > > + return err; > > + } > > + > > + drm_connector_helper_add(&ctx->connector, > > + &anx7625_connector_helper_funcs); > > + > > + err = drm_connector_register(&ctx->connector); > > + if (err) { > > + DRM_ERROR("Failed to register connector: %d\n", err); > > + return err; > > + } > > + > > + ctx->connector.polled = DRM_CONNECTOR_POLL_HPD; > > + > > + err = drm_connector_attach_encoder(&ctx->connector, bridge->encoder); > > + if (err) { > > + DRM_ERROR("Failed to link up connector to encoder: %d\n", err); > > + drm_connector_unregister(&ctx->connector); > > + return err; > > + } > > + > > + err = anx7625_attach_dsi(ctx); > > + if (err) { > > + DRM_ERROR("Failed to attach to dsi : %d\n", err); > > + drm_connector_unregister(&ctx->connector); > > + return err; > > + } > > + > > + ctx->bridge_attached = 1; > > + > > + return 0; > > +} > > + > > +static enum drm_mode_status > > +anx7625_bridge_mode_valid(struct drm_bridge *bridge, > > + const struct drm_display_mode *mode) > > +{ > > + struct anx7625_data *ctx = bridge_to_anx7625(bridge); > > + struct device *dev = &ctx->client->dev; > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "drm mode checking\n"); > > + > > + /* Max 1200p at 5.4 Ghz, one lane, pixel clock 300M */ > > + if (mode->clock > SUPPORT_PIXEL_CLOCK) { > > + DRM_DEV_DEBUG_DRIVER(dev, > > + "drm mode invalid, pixelclock too high.\n"); > > + return MODE_CLOCK_HIGH; > > + } > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "drm mode valid.\n"); > > + > > + return MODE_OK; > > +} > > + > > +static void anx7625_bridge_mode_set(struct drm_bridge *bridge, > > + const struct drm_display_mode *old_mode, > > + const struct drm_display_mode *mode) > > +{ > > + struct anx7625_data *ctx = bridge_to_anx7625(bridge); > > + struct device *dev = &ctx->client->dev; > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "drm mode set\n"); > > + > > + mutex_lock(&ctx->lock); > > + > > + ctx->dt.pixelclock.min = mode->clock; > > + ctx->dt.hactive.min = mode->hdisplay; > > + ctx->dt.hsync_len.min = mode->hsync_end - mode->hsync_start; > > + ctx->dt.hfront_porch.min = mode->hsync_start - mode->hdisplay; > > + ctx->dt.hback_porch.min = mode->htotal - mode->hsync_end; > > + ctx->dt.vactive.min = mode->vdisplay; > > + ctx->dt.vsync_len.min = mode->vsync_end - mode->vsync_start; > > + ctx->dt.vfront_porch.min = mode->vsync_start - mode->vdisplay; > > + ctx->dt.vback_porch.min = mode->vtotal - mode->vsync_end; > > + > > + ctx->display_timing_valid = 1; > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "pixelclock(%d).\n", ctx->dt.pixelclock.min); > > + DRM_DEV_DEBUG_DRIVER(dev, "hactive(%d), hsync(%d), hfp(%d), hbp(%d)\n", > > + ctx->dt.hactive.min, > > + ctx->dt.hsync_len.min, > > + ctx->dt.hfront_porch.min, > > + ctx->dt.hback_porch.min); > > + DRM_DEV_DEBUG_DRIVER(dev, "vactive(%d), vsync(%d), vfp(%d), vbp(%d)\n", > > + ctx->dt.vactive.min, > > + ctx->dt.vsync_len.min, > > + ctx->dt.vfront_porch.min, > > + ctx->dt.vback_porch.min); > > + DRM_DEV_DEBUG_DRIVER(dev, "hdisplay(%d),hsync_start(%d).\n", > > + mode->hdisplay, > > + mode->hsync_start); > > + DRM_DEV_DEBUG_DRIVER(dev, "hsync_end(%d),htotal(%d).\n", > > + mode->hsync_end, > > + mode->htotal); > > + DRM_DEV_DEBUG_DRIVER(dev, "vdisplay(%d),vsync_start(%d).\n", > > + mode->vdisplay, > > + mode->vsync_start); > > + DRM_DEV_DEBUG_DRIVER(dev, "vsync_end(%d),vtotal(%d).\n", > > + mode->vsync_end, > > + mode->vtotal); > > + > > + mutex_unlock(&ctx->lock); > > +} > > + > > +static bool anx7625_bridge_mode_fixup(struct drm_bridge *bridge, > > + const struct drm_display_mode *mode, > > + struct drm_display_mode *adj) > > +{ > > + struct anx7625_data *ctx = bridge_to_anx7625(bridge); > > + struct device *dev = &ctx->client->dev; > > + u32 hsync, hfp, hbp, hblanking; > > + u32 adj_hsync, adj_hfp, adj_hbp, adj_hblanking, delta_adj; > > + u32 vref, adj_clock; > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "drm mode fixup set\n"); > > + > > + hsync = mode->hsync_end - mode->hsync_start; > > + hfp = mode->hsync_start - mode->hdisplay; > > + hbp = mode->htotal - mode->hsync_end; > > + hblanking = mode->htotal - mode->hdisplay; > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "before mode fixup\n"); > > + DRM_DEV_DEBUG_DRIVER(dev, "hsync(%d), hfp(%d), hbp(%d), clock(%d)\n", > > + hsync, hfp, hbp, adj->clock); > > + DRM_DEV_DEBUG_DRIVER(dev, "hsync_start(%d), hsync_end(%d), htot(%d)\n", > > + adj->hsync_start, adj->hsync_end, adj->htotal); > > + > > + adj_hfp = hfp; > > + adj_hsync = hsync; > > + adj_hbp = hbp; > > + adj_hblanking = hblanking; > > + > > + /* hfp needs to be even */ > > + if (hfp & 0x1) { > > + adj_hfp += 1; > > + adj_hblanking += 1; > > + } > > + > > + /* hbp needs to be even */ > > + if (hbp & 0x1) { > > + adj_hbp -= 1; > > + adj_hblanking -= 1; > > + } > > + > > + /* hsync needs to be even */ > > + if (hsync & 0x1) { > > + if (adj_hblanking < hblanking) > > + adj_hsync += 1; > > + else > > + adj_hsync -= 1; > > + } > > + > > + /* > > + * once illegal timing detected, use default HFP, HSYNC, HBP > > + */ > > + if (hblanking < HBLANKING_MIN || (hfp < HP_MIN && hbp < HP_MIN)) { > > + adj_hsync = SYNC_LEN_DEF; > > + adj_hfp = HFP_HBP_DEF; > > + adj_hbp = HFP_HBP_DEF; > > + vref = adj->clock * 1000 / (adj->htotal * adj->vtotal); > > + if (hblanking < HBLANKING_MIN) { > > + delta_adj = HBLANKING_MIN - hblanking; > > + adj_clock = vref * delta_adj * adj->vtotal; > > + adj->clock += DIV_ROUND_UP(adj_clock, 1000); > > + } else { > > + delta_adj = hblanking - HBLANKING_MIN; > > + adj_clock = vref * delta_adj * adj->vtotal; > > + adj->clock -= DIV_ROUND_UP(adj_clock, 1000); > > + } > > + > > + DRM_WARN("illegal hblanking timing, use default.\n"); > > + DRM_WARN("hfp(%d), hbp(%d), hsync(%d).\n", hfp, hbp, hsync); > > + } else if (adj_hfp < HP_MIN) { > > + /* adjust hfp if hfp less than HP_MIN */ > > + delta_adj = HP_MIN - adj_hfp; > > + adj_hfp = HP_MIN; > > + > > + /* > > + * balance total HBlanking pixel, if HBP does not have enough > > + * space, adjust HSYNC length, otherwise adjust HBP > > + */ > > + if ((adj_hbp - delta_adj) < HP_MIN) > > + /* hbp not enough space */ > > + adj_hsync -= delta_adj; > > + else > > + adj_hbp -= delta_adj; > > + } else if (adj_hbp < HP_MIN) { > > + delta_adj = HP_MIN - adj_hbp; > > + adj_hbp = HP_MIN; > > + > > + /* > > + * balance total HBlanking pixel, if HBP hasn't enough space, > > + * adjust HSYNC length, otherwize adjust HBP > > + */ > > + if ((adj_hfp - delta_adj) < HP_MIN) > > + /* hbp not enough space */ > > + adj_hsync -= delta_adj; > > + else > > + adj_hfp -= delta_adj; > > + } > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "after mode fixup\n"); > > + DRM_DEV_DEBUG_DRIVER(dev, "hsync(%d), hfp(%d), hbp(%d), clock(%d)\n", > > + adj_hsync, adj_hfp, adj_hbp, adj->clock); > > + > > + /* reconstruct timing */ > > + adj->hsync_start = adj->hdisplay + adj_hfp; > > + adj->hsync_end = adj->hsync_start + adj_hsync; > > + adj->htotal = adj->hsync_end + adj_hbp; > > + DRM_DEV_DEBUG_DRIVER(dev, "hsync_start(%d), hsync_end(%d), htot(%d)\n", > > + adj->hsync_start, adj->hsync_end, adj->htotal); > > + > > + return true; > > +} > > + > > +static void anx7625_bridge_enable(struct drm_bridge *bridge) > > +{ > > + struct anx7625_data *ctx = bridge_to_anx7625(bridge); > > + struct device *dev = &ctx->client->dev; > > + int ret; > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "drm enable\n"); > > + > > + anx7625_low_power_mode_check(ctx, 1); > > + > > + if (WARN_ON(!atomic_read(&ctx->power_status))) > > + return; > > + > > + if (ctx->pdata.panel) { > > + ret = drm_panel_enable(ctx->pdata.panel); > > + if (ret < 0) { > > + DRM_ERROR("failed to enable panel: %d.\n", ret); > > + return; > > + } > > + } > > + > > + mutex_lock(&ctx->lock); > > + anx7625_dp_start(ctx); > > + mutex_unlock(&ctx->lock); > > +} > > + > > +static void anx7625_bridge_disable(struct drm_bridge *bridge) > > +{ > > + struct anx7625_data *ctx = bridge_to_anx7625(bridge); > > + struct device *dev = &ctx->client->dev; > > + int ret; > > + > > + if (WARN_ON(!atomic_read(&ctx->power_status))) > > + return; > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "drm disable\n"); > > + > > + if (ctx->pdata.panel) { > > + ret = drm_panel_disable(ctx->pdata.panel); > > + if (ret < 0) > > + DRM_ERROR("failed to disable panel: %d.\n", ret); > > + } > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "drm disable\n"); > > + mutex_lock(&ctx->lock); > > + > > + anx7625_dp_stop(ctx); > > + > > + anx7625_low_power_mode_check(ctx, 0); > > + > > + mutex_unlock(&ctx->lock); > > +} > > + > > +static const struct drm_bridge_funcs anx7625_bridge_funcs = { > > + .attach = anx7625_bridge_attach, > > + .detach = anx7625_bridge_detach, > > + .disable = anx7625_bridge_disable, > > + .post_disable = anx7625_post_disable, > > + .pre_enable = anx7625_pre_enable, > > + .mode_valid = anx7625_bridge_mode_valid, > > + .mode_set = anx7625_bridge_mode_set, > > + .mode_fixup = anx7625_bridge_mode_fixup, > > + .enable = anx7625_bridge_enable, > > +}; > > + > > +static int anx7625_register_i2c_dummy_clients(struct anx7625_data *ctx, > > + struct i2c_client *client) > > +{ > > + ctx->i2c.tx_p0_client = i2c_new_dummy(client->adapter, > > + TX_P0_ADDR >> 1); > > + if (!ctx->i2c.tx_p0_client) > > + return -ENOMEM; > > + > > + ctx->i2c.tx_p1_client = i2c_new_dummy(client->adapter, > > + TX_P1_ADDR >> 1); > > + if (!ctx->i2c.tx_p1_client) > > + goto free_tx_p0; > > + > > + ctx->i2c.tx_p2_client = i2c_new_dummy(client->adapter, > > + TX_P2_ADDR >> 1); > > + if (!ctx->i2c.tx_p2_client) > > + goto free_tx_p1; > > + > > + ctx->i2c.rx_p0_client = i2c_new_dummy(client->adapter, > > + RX_P0_ADDR >> 1); > > + if (!ctx->i2c.rx_p0_client) > > + goto free_tx_p2; > > + > > + ctx->i2c.rx_p1_client = i2c_new_dummy(client->adapter, > > + RX_P1_ADDR >> 1); > > + if (!ctx->i2c.rx_p1_client) > > + goto free_rx_p0; > > + > > + ctx->i2c.rx_p2_client = i2c_new_dummy(client->adapter, > > + RX_P2_ADDR >> 1); > > + if (!ctx->i2c.rx_p2_client) > > + goto free_rx_p1; > > + > > + ctx->i2c.tcpc_client = i2c_new_dummy(client->adapter, > > + TCPC_INTERFACE_ADDR >> 1); > > + if (!ctx->i2c.tcpc_client) > > + goto free_rx_p2; > > + > > + return 0; > > + > > +free_rx_p2: > > + i2c_unregister_device(ctx->i2c.rx_p2_client); > > +free_rx_p1: > > + i2c_unregister_device(ctx->i2c.rx_p1_client); > > +free_rx_p0: > > + i2c_unregister_device(ctx->i2c.rx_p0_client); > > +free_tx_p2: > > + i2c_unregister_device(ctx->i2c.tx_p2_client); > > +free_tx_p1: > > + i2c_unregister_device(ctx->i2c.tx_p1_client); > > +free_tx_p0: > > + i2c_unregister_device(ctx->i2c.tx_p0_client); > > + > > + return -ENOMEM; > > +} > > + > > +static void anx7625_unregister_i2c_dummy_clients(struct anx7625_data *ctx) > > +{ > > + i2c_unregister_device(ctx->i2c.tx_p0_client); > > + i2c_unregister_device(ctx->i2c.tx_p1_client); > > + i2c_unregister_device(ctx->i2c.tx_p2_client); > > + i2c_unregister_device(ctx->i2c.rx_p0_client); > > + i2c_unregister_device(ctx->i2c.rx_p1_client); > > + i2c_unregister_device(ctx->i2c.rx_p2_client); > > + i2c_unregister_device(ctx->i2c.tcpc_client); > > +} > > + > > +static int anx7625_i2c_probe(struct i2c_client *client, > > + const struct i2c_device_id *id) > > +{ > > + struct anx7625_data *platform; > > + struct anx7625_platform_data *pdata; > > + int ret = 0; > > + struct device *dev = &client->dev; > > + > > + if (!i2c_check_functionality(client->adapter, > > + I2C_FUNC_SMBUS_I2C_BLOCK)) { > > + DRM_DEV_ERROR(dev, "anx7625's i2c bus doesn't support\n"); > > + return -ENODEV; > > + } > > + > > + platform = kzalloc(sizeof(*platform), GFP_KERNEL); > > + if (!platform) { > > + DRM_DEV_ERROR(dev, "failed to allocate driver data\n"); > > + return -ENOMEM; > > + } > > + > > + pdata = &platform->pdata; > > + > > + ret = anx7625_parse_dt(dev, pdata); > > + if (ret) { > > + if (ret != -EPROBE_DEFER) > > + DRM_DEV_ERROR(dev, "failed to parse devicetree.\n"); > > + goto free_platform; > > + } > > + > > + platform->client = client; > > + i2c_set_clientdata(client, platform); > > + > > + anx7625_init_gpio(platform); > > + > > + if (platform->pdata.extcon_supported) { > > + /* get extcon device from DTS */ > > + ret = -EINVAL; > > + platform->extcon = extcon_get_edev_by_phandle(dev, 0); > > + if (PTR_ERR(platform->extcon) == -EPROBE_DEFER) > > + goto free_platform; > > + > > + if (IS_ERR(platform->extcon)) { > > + DRM_DEV_ERROR(dev, > > + "can not get extcon device!"); > > + goto free_platform; > > + } > > + > > + ret = anx7625_extcon_notifier_init(platform); > > + if (ret) > > + goto free_platform; > > + } > > + > > + atomic_set(&platform->power_status, 0); > > + > > + mutex_init(&platform->lock); > > + > > + platform->pdata.intp_irq = client->irq; > > + if (platform->pdata.intp_irq) { > > + INIT_WORK(&platform->work, anx7625_work_func); > > + platform->workqueue = create_workqueue("anx7625_work"); > > + if (!platform->workqueue) { > > + DRM_DEV_ERROR(dev, "failed to create work queue\n"); > > + ret = -ENOMEM; > > + goto free_platform; > > + } > > + > > + ret = devm_request_threaded_irq(dev, platform->pdata.intp_irq, > > + NULL, anx7625_intr_hpd_isr, > > + IRQF_TRIGGER_FALLING | > > + IRQF_ONESHOT, > > + "anx7625-intp", platform); > > + if (ret) { > > + DRM_DEV_ERROR(dev, "failed to request irq\n"); > > + goto free_wq; > > + } > > + } > > + > > + if (anx7625_register_i2c_dummy_clients(platform, client) != 0) { > > + ret = -ENOMEM; > > + DRM_ERROR("Failed to reserve I2C bus.\n"); > > + goto free_wq; > > + } > > + > > + if (platform->pdata.low_power_mode == 0) { > > + anx7625_disable_pd_protocol(platform); > > + atomic_set(&platform->power_status, 1); > > + } > > + > > + /* add work function */ > > + if (platform->pdata.intp_irq) > > + queue_work(platform->workqueue, &platform->work); > > + > > + platform->bridge.funcs = &anx7625_bridge_funcs; > > +#ifdef CONFIG_OF > > + platform->bridge.of_node = client->dev.of_node; > > +#endif > > + drm_bridge_add(&platform->bridge); > > + > > + DRM_DEV_DEBUG_DRIVER(dev, "probe done\n"); > > + > > + return 0; > > + > > +free_wq: > > + if (platform->workqueue) > > + destroy_workqueue(platform->workqueue); > > + > > +free_platform: > > + kfree(platform); > > + > > + return ret; > > +} > > + > > +static int anx7625_i2c_remove(struct i2c_client *client) > > +{ > > + struct anx7625_data *platform = i2c_get_clientdata(client); > > + > > + drm_bridge_remove(&platform->bridge); > > + > > + if (platform->pdata.intp_irq) > > + destroy_workqueue(platform->workqueue); > > + > > + if (platform->pdata.extcon_supported) { > > + devm_extcon_unregister_notifier(&platform->client->dev, > > + platform->extcon, > > + EXTCON_DISP_DP, > > + &platform->event_nb); > > + flush_work(&platform->extcon_wq); > > + } > > + > > + anx7625_unregister_i2c_dummy_clients(platform); > > + > > + kfree(platform); > > + return 0; > > +} > > + > > +static const struct i2c_device_id anx7625_id[] = { > > + {"anx7625", 0}, > > + {} > > +}; > > + > > +MODULE_DEVICE_TABLE(i2c, anx7625_id); > > + > > +#ifdef CONFIG_OF > > +static const struct of_device_id anx_match_table[] = { > > + {.compatible = "analogix,anx7625",}, > > + {}, > > +}; > > +#endif > > + > > +static struct i2c_driver anx7625_driver = { > > + .driver = { > > + .name = "anx7625", > > +#ifdef CONFIG_OF > > + .of_match_table = anx_match_table, > > +#endif > > + }, > > + .probe = anx7625_i2c_probe, > > + .remove = anx7625_i2c_remove, > > + > > + .id_table = anx7625_id, > > +}; > > + > > +module_i2c_driver(anx7625_driver); > > + > > +MODULE_DESCRIPTION("MIPI2DP anx7625 driver"); > > +MODULE_AUTHOR("Xin Ji <xji@xxxxxxxxxxxxxxxx>"); > > +MODULE_LICENSE("GPL v2"); > > +MODULE_VERSION(ANX7625_DRV_VERSION); > > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h > > new file mode 100644 > > index 0000000..c6f1038 > > --- /dev/null > > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h > > @@ -0,0 +1,410 @@ > > +/* SPDX-License-Identifier: GPL-2.0-only */ > > +/* > > + * Copyright(c) 2016, Analogix Semiconductor. All rights reserved. > > + * > > + */ > > + > > +#ifndef __ANX7625_H__ > > +#define __ANX7625_H__ > > + > > +#ifndef LOG_TAG > > +#define LOG_TAG "anx7625dp" > > +#endif > Not used - delete? OK > > > + > > +#define ANX7625_DRV_VERSION "0.1.04" > > + > > +/* Loading OCM re-trying times */ > > +#define OCM_LOADING_TIME 10 > > + > > +/********* ANX7625 Register **********/ > > +#define TX_P0_ADDR 0x70 > > +#define TX_P1_ADDR 0x7A > > +#define TX_P2_ADDR 0x72 > > + > > +#define RX_P0_ADDR 0x7e > > +#define RX_P1_ADDR 0x84 > > +#define RX_P2_ADDR 0x54 > > + > > +#define RSVD_00_ADDR 0x00 > > +#define RSVD_D1_ADDR 0xD1 > > +#define RSVD_60_ADDR 0x60 > > +#define RSVD_39_ADDR 0x39 > > +#define RSVD_7F_ADDR 0x7F > > + > > +#define TCPC_INTERFACE_ADDR 0x58 > > + > > +/* anx7625 clock frequency in Hz */ > > +#define XTAL_FRQ (27 * 1000000) > > + > > +#define POST_DIVIDER_MIN 1 > > +#define POST_DIVIDER_MAX 16 > > +#define PLL_OUT_FREQ_MIN 520000000UL > > +#define PLL_OUT_FREQ_MAX 730000000UL > > +#define PLL_OUT_FREQ_ABS_MIN 300000000UL > > +#define PLL_OUT_FREQ_ABS_MAX 800000000UL > > +#define MAX_UNSIGNED_24BIT 16777215UL > > + > > +/***************************************************************/ > > +/* Register definition of device address 0x58 */ > > + > > +#define PRODUCT_ID_L 0x02 > > +#define PRODUCT_ID_H 0x03 > > + > > +#define INTR_ALERT_1 0xCC > > +#define INTR_SOFTWARE_INT BIT(3) > > +#define INTR_RECEIVED_MSG BIT(5) > > + > > +#define SYSTEM_STSTUS 0x45 > > +#define INTERFACE_CHANGE_INT 0x44 > > +#define HPD_STATUS_CHANGE 0x80 > > +#define HPD_STATUS 0x80 > > + > > +/******** END of I2C Address 0x58 ********/ > > + > > +/***************************************************************/ > > +/* Register definition of device address 0x70 */ > > +#define I2C_ADDR_70_DPTX 0x70 > > + > > +#define SP_TX_LINK_BW_SET_REG 0xA0 > > +#define SP_TX_LANE_COUNT_SET_REG 0xA1 > > + > > +#define M_VID_0 0xC0 > > +#define M_VID_1 0xC1 > > +#define M_VID_2 0xC2 > > +#define N_VID_0 0xC3 > > +#define N_VID_1 0xC4 > > +#define N_VID_2 0xC5 > > + > > +/***************************************************************/ > > +/* Register definition of device address 0x72 */ > > +#define AUX_RST 0x04 > > +#define RST_CTRL2 0x07 > > + > > +#define SP_TX_TOTAL_LINE_STA_L 0x24 > > +#define SP_TX_TOTAL_LINE_STA_H 0x25 > > +#define SP_TX_ACT_LINE_STA_L 0x26 > > +#define SP_TX_ACT_LINE_STA_H 0x27 > > +#define SP_TX_V_F_PORCH_STA 0x28 > > +#define SP_TX_V_SYNC_STA 0x29 > > +#define SP_TX_V_B_PORCH_STA 0x2A > > +#define SP_TX_TOTAL_PIXEL_STA_L 0x2B > > +#define SP_TX_TOTAL_PIXEL_STA_H 0x2C > > +#define SP_TX_ACT_PIXEL_STA_L 0x2D > > +#define SP_TX_ACT_PIXEL_STA_H 0x2E > > +#define SP_TX_H_F_PORCH_STA_L 0x2F > > +#define SP_TX_H_F_PORCH_STA_H 0x30 > > +#define SP_TX_H_SYNC_STA_L 0x31 > > +#define SP_TX_H_SYNC_STA_H 0x32 > > +#define SP_TX_H_B_PORCH_STA_L 0x33 > > +#define SP_TX_H_B_PORCH_STA_H 0x34 > > + > > +#define SP_TX_VID_CTRL 0x84 > > +#define SP_TX_BPC_MASK 0xE0 > > +#define SP_TX_BPC_6 0x00 > > +#define SP_TX_BPC_8 0x20 > > +#define SP_TX_BPC_10 0x40 > > +#define SP_TX_BPC_12 0x60 > > + > > +#define VIDEO_BIT_MATRIX_12 0x4c > > + > > +#define AUDIO_CHANNEL_STATUS_1 0xd0 > > +#define AUDIO_CHANNEL_STATUS_2 0xd1 > > +#define AUDIO_CHANNEL_STATUS_3 0xd2 > > +#define AUDIO_CHANNEL_STATUS_4 0xd3 > > +#define AUDIO_CHANNEL_STATUS_5 0xd4 > > +#define AUDIO_CHANNEL_STATUS_6 0xd5 > > +#define TDM_SLAVE_MODE 0x10 > > +#define I2S_SLAVE_MODE 0x08 > > + > > +#define AUDIO_CONTROL_REGISTER 0xe6 > > +#define TDM_TIMING_MODE 0x08 > > + > > +#define I2C_ADDR_72_DPTX 0x72 > > + > > +#define HP_MIN 8 > > +#define HBLANKING_MIN 80 > > +#define SYNC_LEN_DEF 32 > > +#define HFP_HBP_DEF ((HBLANKING_MIN - SYNC_LEN_DEF) / 2) > > +#define VIDEO_CONTROL_0 0x08 > > + > > +#define ACTIVE_LINES_L 0x14 > > +#define ACTIVE_LINES_H 0x15 /* note: bit[7:6] are reserved */ > > +#define VERTICAL_FRONT_PORCH 0x16 > > +#define VERTICAL_SYNC_WIDTH 0x17 > > +#define VERTICAL_BACK_PORCH 0x18 > > + > > +#define HORIZONTAL_TOTAL_PIXELS_L 0x19 > > +#define HORIZONTAL_TOTAL_PIXELS_H 0x1A /* note: bit[7:6] are reserved */ > > +#define HORIZONTAL_ACTIVE_PIXELS_L 0x1B > > +#define HORIZONTAL_ACTIVE_PIXELS_H 0x1C /* note: bit[7:6] are reserved */ > > +#define HORIZONTAL_FRONT_PORCH_L 0x1D > > +#define HORIZONTAL_FRONT_PORCH_H 0x1E /* note: bit[7:4] are reserved */ > > +#define HORIZONTAL_SYNC_WIDTH_L 0x1F > > +#define HORIZONTAL_SYNC_WIDTH_H 0x20 /* note: bit[7:4] are reserved */ > > +#define HORIZONTAL_BACK_PORCH_L 0x21 > > +#define HORIZONTAL_BACK_PORCH_H 0x22 /* note: bit[7:4] are reserved */ > > + > > +/******** END of I2C Address 0x72 *********/ > > +/***************************************************************/ > > +/* Register definition of device address 0x7e */ > > + > > +#define I2C_ADDR_7E_FLASH_CONTROLLER 0x7E > > + > > +#define FLASH_LOAD_STA 0x05 > > +#define FLASH_LOAD_STA_CHK BIT(7) > > + > > +#define XTAL_FRQ_SEL 0x3F > > +/* bit field positions */ > > +#define XTAL_FRQ_SEL_POS 5 > > +/* bit field values */ > > +#define XTAL_FRQ_19M2 (0 << XTAL_FRQ_SEL_POS) > > +#define XTAL_FRQ_27M (4 << XTAL_FRQ_SEL_POS) > > + > > +#define R_DSC_CTRL_0 0x40 > > +#define READ_STATUS_EN 7 > > +#define CLK_1MEG_RB 6 /* 1MHz clock reset; 0=reset, 0=reset release */ > > +#define DSC_BIST_DONE 1 /* bit[5:1]: 1=DSC MBIST pass */ > > +#define DSC_EN 0x01 /* 1=DSC enabled, 0=DSC disabled */ > > + > > +#define OCM_FW_VERSION 0x31 > > +#define OCM_FW_REVERSION 0x32 > > + > > +#define AP_AUX_ADDR_7_0 0x11 > > +#define AP_AUX_ADDR_15_8 0x12 > > +#define AP_AUX_ADDR_19_16 0x13 > > + > > +/* note: bit[0:3] AUX status, bit 4 op_en, bit 5 address only */ > > +#define AP_AUX_CTRL_STATUS 0x14 > > +#define AP_AUX_CTRL_OP_EN 0x10 > > +#define AP_AUX_CTRL_ADDRONLY 0x20 > > + > > +#define AP_AUX_BUFF_START 0x15 > > +#define PIXEL_CLOCK_L 0x25 > > +#define PIXEL_CLOCK_H 0x26 > > + > > +#define AP_AUX_COMMAND 0x27 /* com+len */ > > +/* bit 0&1: 3D video structure */ > > +/* 0x01: frame packing, 0x02:Line alternative, 0x03:Side-by-side(full) */ > > +#define AP_AV_STATUS 0x28 > > +#define AP_VIDEO_CHG BIT(2) > > +#define AP_AUDIO_CHG BIT(3) > > +#define AP_MIPI_MUTE BIT(4) /* 1:MIPI input mute, 0: ummute */ > > +#define AP_MIPI_RX_EN BIT(5) /* 1: MIPI RX input in 0: no RX in */ > > +#define AP_DISABLE_PD BIT(6) > > +#define AP_DISABLE_DISPLAY BIT(7) > > +/***************************************************************/ > > +/* Register definition of device address 0x84 */ > > +#define MIPI_PHY_CONTROL_3 0x03 > > +#define MIPI_HS_PWD_CLK 7 > > +#define MIPI_HS_RT_CLK 6 > > +#define MIPI_PD_CLK 5 > > +#define MIPI_CLK_RT_MANUAL_PD_EN 4 > > +#define MIPI_CLK_HS_MANUAL_PD_EN 3 > > +#define MIPI_CLK_DET_DET_BYPASS 2 > > +#define MIPI_CLK_MISS_CTRL 1 > > +#define MIPI_PD_LPTX_CH_MANUAL_PD_EN 0 > > + > > +#define MIPI_LANE_CTRL_0 0x05 > > +#define MIPI_TIME_HS_PRPR 0x08 > > + > > +/* After MIPI RX protocol layer received this many video frames, */ > > +/* protocol layer starts to reconstruct video stream from PHY */ > > +#define MIPI_VIDEO_STABLE_CNT 0x0A > > + > > +#define MIPI_LANE_CTRL_10 0x0F > > +#define MIPI_DIGITAL_ADJ_1 0x1B > > + > > +#define MIPI_PLL_M_NUM_23_16 0x1E > > +#define MIPI_PLL_M_NUM_15_8 0x1F > > +#define MIPI_PLL_M_NUM_7_0 0x20 > > +#define MIPI_PLL_N_NUM_23_16 0x21 > > +#define MIPI_PLL_N_NUM_15_8 0x22 > > +#define MIPI_PLL_N_NUM_7_0 0x23 > > + > > +#define MIPI_DIGITAL_PLL_6 0x2A > > +/* bit[7:6]: VCO band control, only effective */ > > +/* when MIPI_PLL_FORCE_BAND_EN (0x84:0x2B[6]) is 1 */ > > +#define MIPI_M_NUM_READY 0x10 > > +#define MIPI_N_NUM_READY 0x08 > > +#define STABLE_INTEGER_CNT_EN 0x04 > > +#define MIPI_PLL_TEST_BIT 0 > > +/* bit[1:0]: test point output select - */ > > +/* 00: VCO power, 01: dvdd_pdt, 10: dvdd, 11: vcox */ > > + > > +#define MIPI_DIGITAL_PLL_7 0x2B > > +#define MIPI_PLL_FORCE_N_EN 7 > > +#define MIPI_PLL_FORCE_BAND_EN 6 > > + > > +#define MIPI_PLL_VCO_TUNE_REG 4 > > +/* bit[5:4]: VCO metal capacitance - */ > > +/* 00: +20% fast, 01: +10% fast (default), 10: typical, 11: -10% slow */ > > +#define MIPI_PLL_VCO_TUNE_REG_VAL 0x30 > > + > > +#define MIPI_PLL_PLL_LDO_BIT 2 > > +/* bit[3:2]: vco_v2i power - */ > > +/* 00: 1.40V, 01: 1.45V (default), 10: 1.50V, 11: 1.55V */ > > +#define MIPI_PLL_RESET_N 0x02 > > +#define MIPI_FRQ_FORCE_NDET 0 > > + > > +#define MIPI_ALERT_CLR_0 0x2D > > +#define HS_link_error_clear 7 > > +/* This bit itself is S/C, and it clears 0x84:0x31[7] */ > > + > > +#define MIPI_ALERT_OUT_0 0x31 > > +#define check_sum_err_hs_sync 7 > > +/* This bit is cleared by 0x84:0x2D[7] */ > > + > > +#define MIPI_DIGITAL_PLL_8 0x33 > > +#define MIPI_POST_DIV_VAL 4 > > +/* n means divided by (n+1), n = 0~15 */ > > +#define MIPI_EN_LOCK_FRZ 3 > > +#define MIPI_FRQ_COUNTER_RST 2 > > +#define MIPI_FRQ_SET_REG_8 1 > > +/* bit 0 is reserved */ > > + > > +#define MIPI_DIGITAL_PLL_9 0x34 > > + > > +#define MIPI_DIGITAL_PLL_16 0x3B > > +#define MIPI_FRQ_FREEZE_NDET 7 > > +#define MIPI_FRQ_REG_SET_ENABLE 6 > > +#define MIPI_REG_FORCE_SEL_EN 5 > > +#define MIPI_REG_SEL_DIV_REG 4 > > +#define MIPI_REG_FORCE_PRE_DIV_EN 3 > > +/* bit 2 is reserved */ > > +#define MIPI_FREF_D_IND 1 > > +#define REF_CLK_27000KHZ 1 > > +#define REF_CLK_19200KHZ 0 > > +#define MIPI_REG_PLL_PLL_TEST_ENABLE 0 > > + > > +#define MIPI_DIGITAL_PLL_18 0x3D > > +#define FRQ_COUNT_RB_SEL 7 > > +#define REG_FORCE_POST_DIV_EN 6 > > +#define MIPI_DPI_SELECT 5 > > +#define SELECT_DSI 1 > > +#define SELECT_DPI 0 > > +#define REG_BAUD_DIV_RATIO 0 > > + > > +#define H_BLANK_L 0x3E > > +/* for DSC only */ > > +#define H_BLANK_H 0x3F > > +/* for DSC only; note: bit[7:6] are reserved */ > > +#define MIPI_SWAP 0x4A > > +#define MIPI_SWAP_CH0 7 > > +#define MIPI_SWAP_CH1 6 > > +#define MIPI_SWAP_CH2 5 > > +#define MIPI_SWAP_CH3 4 > > +#define MIPI_SWAP_CLK 3 > > +/* bit[2:0] are reserved */ > > + > > +/******** END of I2C Address 0x84 *********/ > > + > > +/* DPCD regs */ > > +#define DPCD_DPCD_REV 0x00 > > +#define DPCD_MAX_LINK_RATE 0x01 > > +#define DPCD_MAX_LANE_COUNT 0x02 > > + > > +/********* ANX7625 Register End **********/ > > + > > +/***************** Display *****************/ > > +enum audio_fs { > > + AUDIO_FS_441K = 0x00, > > + AUDIO_FS_48K = 0x02, > > + AUDIO_FS_32K = 0x03, > > + AUDIO_FS_882K = 0x08, > > + AUDIO_FS_96K = 0x0a, > > + AUDIO_FS_1764K = 0x0c, > > + AUDIO_FS_192K = 0x0e > > +}; > > + > > +enum audio_wd_len { > > + AUDIO_W_LEN_16_20MAX = 0x02, > > + AUDIO_W_LEN_18_20MAX = 0x04, > > + AUDIO_W_LEN_17_20MAX = 0x0c, > > + AUDIO_W_LEN_19_20MAX = 0x08, > > + AUDIO_W_LEN_20_20MAX = 0x0a, > > + AUDIO_W_LEN_20_24MAX = 0x03, > > + AUDIO_W_LEN_22_24MAX = 0x05, > > + AUDIO_W_LEN_21_24MAX = 0x0d, > > + AUDIO_W_LEN_23_24MAX = 0x09, > > + AUDIO_W_LEN_24_24MAX = 0x0b > > +}; > > + > > +#define I2S_CH_2 0x01 > > +#define TDM_CH_4 0x03 > > +#define TDM_CH_6 0x05 > > +#define TDM_CH_8 0x07 > > + > > +#define MAX_DPCD_BUFFER_SIZE 16 > > + > > +#define ONE_BLOCK_SIZE 128 > > +#define FOUR_BLOCK_SIZE (128 * 4) > > + > > +#define MAX_EDID_BLOCK 3 > > +#define EDID_TRY_CNT 3 > > +#define SUPPORT_PIXEL_CLOCK 300000 > > + > > +struct s_edid_data { > > + int edid_block_num; > > + u8 edid_raw_data[FOUR_BLOCK_SIZE]; > > +}; > > + > > +/***************** Display End *****************/ > > + > > +struct anx7625_device_node { > > + struct device_node *mipi_dsi_host_node; > > + struct device_node *mipi_dpi_host_node; > > + struct device_node *panel_node; > > +}; > > + > > +struct anx7625_platform_data { > > + struct gpio_desc *gpio_p_on; > > + struct gpio_desc *gpio_reset; > > + struct drm_panel *panel; > > + int intp_irq; > > + u32 panel_flags; > > + u32 low_power_mode; > > + u32 dsi_supported; > > + u32 internal_panel; > > + u32 extcon_supported; > > + struct anx7625_device_node node; > > +}; > > + > > +struct anx7625_i2c_client { > > + struct i2c_client *tx_p0_client; > > + struct i2c_client *tx_p1_client; > > + struct i2c_client *tx_p2_client; > > + struct i2c_client *rx_p0_client; > > + struct i2c_client *rx_p1_client; > > + struct i2c_client *rx_p2_client; > > + struct i2c_client *tcpc_client; > > +}; > > + > > +struct anx7625_data { > > + struct anx7625_platform_data pdata; > > + atomic_t power_status; > > + atomic_t panel_power; > > + int hpd_status; > > + int hpd_high_cnt; > > + struct i2c_client *client; > > + struct anx7625_i2c_client i2c; > > + struct i2c_client *last_client; > > + struct s_edid_data slimport_edid_p; > > + struct work_struct work; > > + struct workqueue_struct *workqueue; > > + /* drm bridge mutex lock */ > > + struct mutex lock; > Could you be more specific in what the mutex locks for? OK, remove it. > > > > + char edid_block; > > + struct display_timing dt; > > + u8 display_timing_valid; > > + struct drm_bridge bridge; > > + u8 bridge_attached; > > + struct drm_connector connector; > > + struct mipi_dsi_device *dsi; > > + struct drm_dp_link link; > > + struct drm_display_mode vid_info; > > + struct notifier_block event_nb; > > + struct extcon_dev *extcon; > > + struct work_struct extcon_wq; > > +}; > > + > > +#endif /* __ANX7625_H__ */ > > -- > > 2.7.4 > > > > _______________________________________________ > > dri-devel mailing list > > dri-devel@xxxxxxxxxxxxxxxxxxxxx > > https://lists.freedesktop.org/mailman/listinfo/dri-devel _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
