[PATCH v2 1/7] staging: qlge: Fix indentation in ql_set_mac_addr_reg

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Based on Joe Perches' feedback, fix the indentation throughout
ql_set_mac_addr_reg. This helps fix several "line over 80 characters"
warnings along with the original "multiple line dereference" warning.

Fix checkpatch.pl warnings:

  WARNING: Avoid multiple line dereference - prefer 'qdev->func'
  WARNING: line over 80 characters

Signed-off-by: Rylan Dmello <mail@rylan.coffee>
---
 drivers/staging/qlge/qlge_main.c | 167 +++++++++++++++----------------
 1 file changed, 78 insertions(+), 89 deletions(-)

diff --git a/drivers/staging/qlge/qlge_main.c b/drivers/staging/qlge/qlge_main.c
index d7e4dfafc1a3..29610618c7c0 100644
--- a/drivers/staging/qlge/qlge_main.c
+++ b/drivers/staging/qlge/qlge_main.c
@@ -329,100 +329,89 @@ static int ql_set_mac_addr_reg(struct ql_adapter *qdev, u8 *addr, u32 type,
 	int status = 0;
 
 	switch (type) {
-	case MAC_ADDR_TYPE_MULTI_MAC:
-		{
-			u32 upper = (addr[0] << 8) | addr[1];
-			u32 lower = (addr[2] << 24) | (addr[3] << 16) |
-					(addr[4] << 8) | (addr[5]);
+	case MAC_ADDR_TYPE_MULTI_MAC: {
+		u32 upper = (addr[0] << 8) | addr[1];
+		u32 lower = (addr[2] << 24) | (addr[3] << 16) | (addr[4] << 8) |
+			    (addr[5]);
 
-			status =
-				ql_wait_reg_rdy(qdev,
-						MAC_ADDR_IDX, MAC_ADDR_MW, 0);
-			if (status)
-				goto exit;
-			ql_write32(qdev, MAC_ADDR_IDX, (offset++) |
-				(index << MAC_ADDR_IDX_SHIFT) |
-				type | MAC_ADDR_E);
-			ql_write32(qdev, MAC_ADDR_DATA, lower);
-			status =
-				ql_wait_reg_rdy(qdev,
-						MAC_ADDR_IDX, MAC_ADDR_MW, 0);
-			if (status)
-				goto exit;
-			ql_write32(qdev, MAC_ADDR_IDX, (offset++) |
-				(index << MAC_ADDR_IDX_SHIFT) |
-				type | MAC_ADDR_E);
+		status = ql_wait_reg_rdy(qdev, MAC_ADDR_IDX, MAC_ADDR_MW, 0);
+		if (status)
+			goto exit;
+		ql_write32(qdev, MAC_ADDR_IDX,
+			   (offset++) | (index << MAC_ADDR_IDX_SHIFT) | type |
+				   MAC_ADDR_E);
+		ql_write32(qdev, MAC_ADDR_DATA, lower);
+		status = ql_wait_reg_rdy(qdev, MAC_ADDR_IDX, MAC_ADDR_MW, 0);
+		if (status)
+			goto exit;
+		ql_write32(qdev, MAC_ADDR_IDX,
+			   (offset++) | (index << MAC_ADDR_IDX_SHIFT) | type |
+				   MAC_ADDR_E);
 
-			ql_write32(qdev, MAC_ADDR_DATA, upper);
-			status =
-				ql_wait_reg_rdy(qdev,
-						MAC_ADDR_IDX, MAC_ADDR_MW, 0);
-			if (status)
-				goto exit;
-			break;
-		}
-	case MAC_ADDR_TYPE_CAM_MAC:
-		{
-			u32 cam_output;
-			u32 upper = (addr[0] << 8) | addr[1];
-			u32 lower =
-			    (addr[2] << 24) | (addr[3] << 16) | (addr[4] << 8) |
+		ql_write32(qdev, MAC_ADDR_DATA, upper);
+		status = ql_wait_reg_rdy(qdev, MAC_ADDR_IDX, MAC_ADDR_MW, 0);
+		if (status)
+			goto exit;
+		break;
+	}
+	case MAC_ADDR_TYPE_CAM_MAC: {
+		u32 cam_output;
+		u32 upper = (addr[0] << 8) | addr[1];
+		u32 lower = (addr[2] << 24) | (addr[3] << 16) | (addr[4] << 8) |
 			    (addr[5]);
-			status =
-			    ql_wait_reg_rdy(qdev, MAC_ADDR_IDX, MAC_ADDR_MW, 0);
-			if (status)
-				goto exit;
-			ql_write32(qdev, MAC_ADDR_IDX, (offset++) | /* offset */
+		status = ql_wait_reg_rdy(qdev, MAC_ADDR_IDX, MAC_ADDR_MW, 0);
+		if (status)
+			goto exit;
+		ql_write32(qdev, MAC_ADDR_IDX,
+			   (offset++) | /* offset */
 				   (index << MAC_ADDR_IDX_SHIFT) | /* index */
-				   type);	/* type */
-			ql_write32(qdev, MAC_ADDR_DATA, lower);
-			status =
-			    ql_wait_reg_rdy(qdev, MAC_ADDR_IDX, MAC_ADDR_MW, 0);
-			if (status)
-				goto exit;
-			ql_write32(qdev, MAC_ADDR_IDX, (offset++) | /* offset */
+				   type); /* type */
+		ql_write32(qdev, MAC_ADDR_DATA, lower);
+		status = ql_wait_reg_rdy(qdev, MAC_ADDR_IDX, MAC_ADDR_MW, 0);
+		if (status)
+			goto exit;
+		ql_write32(qdev, MAC_ADDR_IDX,
+			   (offset++) | /* offset */
 				   (index << MAC_ADDR_IDX_SHIFT) | /* index */
-				   type);	/* type */
-			ql_write32(qdev, MAC_ADDR_DATA, upper);
-			status =
-			    ql_wait_reg_rdy(qdev, MAC_ADDR_IDX, MAC_ADDR_MW, 0);
-			if (status)
-				goto exit;
-			ql_write32(qdev, MAC_ADDR_IDX, (offset) |	/* offset */
-				   (index << MAC_ADDR_IDX_SHIFT) |	/* index */
-				   type);	/* type */
-			/* This field should also include the queue id
-			 * and possibly the function id.  Right now we hardcode
-			 * the route field to NIC core.
-			 */
-			cam_output = (CAM_OUT_ROUTE_NIC |
-				      (qdev->
-				       func << CAM_OUT_FUNC_SHIFT) |
-					(0 << CAM_OUT_CQ_ID_SHIFT));
-			if (qdev->ndev->features & NETIF_F_HW_VLAN_CTAG_RX)
-				cam_output |= CAM_OUT_RV;
-			/* route to NIC core */
-			ql_write32(qdev, MAC_ADDR_DATA, cam_output);
-			break;
-		}
-	case MAC_ADDR_TYPE_VLAN:
-		{
-			u32 enable_bit = *((u32 *) &addr[0]);
-			/* For VLAN, the addr actually holds a bit that
-			 * either enables or disables the vlan id we are
-			 * addressing. It's either MAC_ADDR_E on or off.
-			 * That's bit-27 we're talking about.
-			 */
-			status =
-			    ql_wait_reg_rdy(qdev, MAC_ADDR_IDX, MAC_ADDR_MW, 0);
-			if (status)
-				goto exit;
-			ql_write32(qdev, MAC_ADDR_IDX, offset |	/* offset */
-				   (index << MAC_ADDR_IDX_SHIFT) |	/* index */
-				   type |	/* type */
-				   enable_bit);	/* enable/disable */
-			break;
-		}
+				   type); /* type */
+		ql_write32(qdev, MAC_ADDR_DATA, upper);
+		status = ql_wait_reg_rdy(qdev, MAC_ADDR_IDX, MAC_ADDR_MW, 0);
+		if (status)
+			goto exit;
+		ql_write32(qdev, MAC_ADDR_IDX,
+			   (offset) | /* offset */
+				   (index << MAC_ADDR_IDX_SHIFT) | /* index */
+				   type); /* type */
+		/* This field should also include the queue id
+		 * and possibly the function id.  Right now we hardcode
+		 * the route field to NIC core.
+		 */
+		cam_output = (CAM_OUT_ROUTE_NIC |
+			      (qdev->func << CAM_OUT_FUNC_SHIFT) |
+			      (0 << CAM_OUT_CQ_ID_SHIFT));
+		if (qdev->ndev->features & NETIF_F_HW_VLAN_CTAG_RX)
+			cam_output |= CAM_OUT_RV;
+		/* route to NIC core */
+		ql_write32(qdev, MAC_ADDR_DATA, cam_output);
+		break;
+	}
+	case MAC_ADDR_TYPE_VLAN: {
+		u32 enable_bit = *((u32 *)&addr[0]);
+		/* For VLAN, the addr actually holds a bit that
+		 * either enables or disables the vlan id we are
+		 * addressing. It's either MAC_ADDR_E on or off.
+		 * That's bit-27 we're talking about.
+		 */
+		status = ql_wait_reg_rdy(qdev, MAC_ADDR_IDX, MAC_ADDR_MW, 0);
+		if (status)
+			goto exit;
+		ql_write32(qdev, MAC_ADDR_IDX,
+			   offset | /* offset */
+				   (index << MAC_ADDR_IDX_SHIFT) | /* index */
+				   type | /* type */
+				   enable_bit); /* enable/disable */
+		break;
+	}
 	case MAC_ADDR_TYPE_MULTI_FLTR:
 	default:
 		netif_crit(qdev, ifup, qdev->ndev,
-- 
2.26.2

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux