On 4/2/20 9:46 PM, Helen Koike wrote:
>
>
> On 4/2/20 2:20 PM, Johan Jonker wrote:
>> Hi Helen,
>>
>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>>> index fc0295d2a65a1..815099a0cd0dd 100644
>>> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>>> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>>> @@ -1718,6 +1718,33 @@ vopb_mmu: iommu@ff903f00 {
>>> status = "disabled";
>>> };
>>>
>>> + isp0: isp0@ff910000 {
>>> + compatible = "rockchip,rk3399-cif-isp";
>>> + reg = <0x0 0xff910000 0x0 0x4000>;
>>> + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
>>> + clocks = <&cru SCLK_ISP0>,
>>> + <&cru ACLK_ISP0>, <&cru ACLK_ISP0_WRAPPER>,
>>> + <&cru HCLK_ISP0>, <&cru HCLK_ISP0_WRAPPER>;
>>> + clock-names = "clk_isp",
>>> + "aclk_isp", "aclk_isp_wrap",
>>> + "hclk_isp", "hclk_isp_wrap";
>>
>>> + power-domains = <&power RK3399_PD_ISP0>;
>>> + iommus = <&isp0_mmu>;
>>> + phys = <&mipi_dphy_rx0>;
>>> + phy-names = "dphy";
>>
>> Maybe a little sort? But keep rest as it is. Also in example.
>>
>> iommus = <&isp0_mmu>;
>> phys = <&mipi_dphy_rx0>;
>> phy-names = "dphy";
>> power-domains = <&power RK3399_PD_ISP0>;
>
> Are you proposing only to move power-domains after phy? And keep the rest?
> What is the main logic?
There is no hard rule... It mostly depend on Heiko...
For nodes:
Sort things without reg alphabetical first,
then sort the rest by reg address.
Inside nodes:
If exists on top: compatible, reg and interrupts.
In alphabetical order the required properties.
Then in alphabetical order the other properties.
And as last things that start with '#' in alphabetical order.
>
> Thanks
> Helen
>
>>
>>> +
>>> + ports {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + port@0 {
>>
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + reg = <0>;
>>
>> Move reg above #address-cells. Change that in example as well.
>>
>> reg = <0>;
>> #address-cells = <1>;
>> #size-cells = <0>;
>>
>>> + };
>>> + };
>>> + };
>>> +
>>> isp0_mmu: iommu@ff914000 {
>>> compatible = "rockchip,iommu";
>>> reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>;
>>> --
>>> 2.26.0
>>
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
