Add space around operators for improving the code
readability.
Reported by checkpatch.pl
git diff -w shows no difference.
diff of the .o files before and after the changes shows no difference.
Signed-off-by: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
---
shreeya@Shreeya-Patel:~git/kernels/staging$ git diff -w drivers/staging/rtl8188eu/hal/rf.c
shreeya@Shreeya-Patel:~git/kernels/staging$
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$ diff rf_old.o rf.o
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$
drivers/staging/rtl8188eu/hal/rf.c | 60 +++++++++++++++---------------
1 file changed, 30 insertions(+), 30 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/rf.c b/drivers/staging/rtl8188eu/hal/rf.c
index 6fe4daea8fd5..00a9f692bb06 100644
--- a/drivers/staging/rtl8188eu/hal/rf.c
+++ b/drivers/staging/rtl8188eu/hal/rf.c
@@ -49,9 +49,9 @@ void rtl88eu_phy_rf6052_set_cck_txpower(struct adapter *adapt, u8 *powerlevel)
tx_agc[RF_PATH_B] = 0x3f3f3f3f;
for (idx1 = RF_PATH_A; idx1 <= RF_PATH_B; idx1++) {
tx_agc[idx1] = powerlevel[idx1] |
- (powerlevel[idx1]<<8) |
- (powerlevel[idx1]<<16) |
- (powerlevel[idx1]<<24);
+ (powerlevel[idx1] << 8) |
+ (powerlevel[idx1] << 16) |
+ (powerlevel[idx1] << 24);
}
} else {
if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1) {
@@ -63,17 +63,17 @@ void rtl88eu_phy_rf6052_set_cck_txpower(struct adapter *adapt, u8 *powerlevel)
} else {
for (idx1 = RF_PATH_A; idx1 <= RF_PATH_B; idx1++) {
tx_agc[idx1] = powerlevel[idx1] |
- (powerlevel[idx1]<<8) |
- (powerlevel[idx1]<<16) |
- (powerlevel[idx1]<<24);
+ (powerlevel[idx1] << 8) |
+ (powerlevel[idx1] << 16) |
+ (powerlevel[idx1] << 24);
}
if (hal_data->EEPROMRegulatory == 0) {
tmpval = hal_data->MCSTxPowerLevelOriginalOffset[0][6] +
- (hal_data->MCSTxPowerLevelOriginalOffset[0][7]<<8);
+ (hal_data->MCSTxPowerLevelOriginalOffset[0][7] << 8);
tx_agc[RF_PATH_A] += tmpval;
tmpval = hal_data->MCSTxPowerLevelOriginalOffset[0][14] +
- (hal_data->MCSTxPowerLevelOriginalOffset[0][15]<<24);
+ (hal_data->MCSTxPowerLevelOriginalOffset[0][15] << 24);
tx_agc[RF_PATH_B] += tmpval;
}
}
@@ -100,15 +100,15 @@ void rtl88eu_phy_rf6052_set_cck_txpower(struct adapter *adapt, u8 *powerlevel)
}
/* rf-A cck tx power */
- tmpval = tx_agc[RF_PATH_A]&0xff;
+ tmpval = tx_agc[RF_PATH_A] & 0xff;
phy_set_bb_reg(adapt, rTxAGC_A_CCK1_Mcs32, bMaskByte1, tmpval);
- tmpval = tx_agc[RF_PATH_A]>>8;
+ tmpval = tx_agc[RF_PATH_A] >> 8;
phy_set_bb_reg(adapt, rTxAGC_B_CCK11_A_CCK2_11, 0xffffff00, tmpval);
/* rf-B cck tx power */
- tmpval = tx_agc[RF_PATH_B]>>24;
+ tmpval = tx_agc[RF_PATH_B] >> 24;
phy_set_bb_reg(adapt, rTxAGC_B_CCK11_A_CCK2_11, bMaskByte0, tmpval);
- tmpval = tx_agc[RF_PATH_B]&0x00ffffff;
+ tmpval = tx_agc[RF_PATH_B] & 0x00ffffff;
phy_set_bb_reg(adapt, rTxAGC_B_CCK1_55_Mcs32, 0xffffff00, tmpval);
}
@@ -124,9 +124,9 @@ static void getpowerbase88e(struct adapter *adapt, u8 *pwr_level_ofdm,
for (i = 0; i < 2; i++) {
powerbase0 = pwr_level_ofdm[i];
- powerbase0 = (powerbase0<<24) | (powerbase0<<16) |
- (powerbase0<<8) | powerbase0;
- *(ofdmbase+i) = powerbase0;
+ powerbase0 = (powerbase0 << 24) | (powerbase0 << 16) |
+ (powerbase0 << 8) | powerbase0;
+ *(ofdmbase + i) = powerbase0;
}
/* Check HT20 to HT40 diff */
if (adapt->HalData->CurrentChannelBW == HT_CHANNEL_WIDTH_20)
@@ -134,8 +134,8 @@ static void getpowerbase88e(struct adapter *adapt, u8 *pwr_level_ofdm,
else
powerlevel[0] = pwr_level_bw40[0];
powerbase1 = powerlevel[0];
- powerbase1 = (powerbase1<<24) | (powerbase1<<16) |
- (powerbase1<<8) | powerbase1;
+ powerbase1 = (powerbase1 << 24) | (powerbase1 << 16) |
+ (powerbase1 << 8) | powerbase1;
*mcs_base = powerbase1;
}
static void get_rx_power_val_by_reg(struct adapter *adapt, u8 channel,
@@ -157,7 +157,7 @@ static void get_rx_power_val_by_reg(struct adapter *adapt, u8 channel,
switch (regulatory) {
case 0:
chnlGroup = 0;
- write_val = hal_data->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf ? 8 : 0)] +
+ write_val = hal_data->MCSTxPowerLevelOriginalOffset[chnlGroup][index + (rf ? 8 : 0)] +
((index < 2) ? powerbase0[rf] : powerbase1[rf]);
break;
case 1: /* Realtek regulatory */
@@ -167,7 +167,7 @@ static void get_rx_power_val_by_reg(struct adapter *adapt, u8 channel,
if (hal_data->pwrGroupCnt >= hal_data->PGMaxGroup)
Hal_GetChnlGroup88E(channel, &chnlGroup);
- write_val = hal_data->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf ? 8 : 0)] +
+ write_val = hal_data->MCSTxPowerLevelOriginalOffset[chnlGroup][index + (rf ? 8 : 0)] +
((index < 2) ? powerbase0[rf] : powerbase1[rf]);
break;
case 2: /* Better regulatory */
@@ -179,14 +179,14 @@ static void get_rx_power_val_by_reg(struct adapter *adapt, u8 channel,
chnlGroup = 0;
if (index < 2)
- pwr_diff = hal_data->TxPwrLegacyHtDiff[rf][channel-1];
+ pwr_diff = hal_data->TxPwrLegacyHtDiff[rf][channel - 1];
else if (hal_data->CurrentChannelBW == HT_CHANNEL_WIDTH_20)
- pwr_diff = hal_data->TxPwrHt20Diff[rf][channel-1];
+ pwr_diff = hal_data->TxPwrHt20Diff[rf][channel - 1];
if (hal_data->CurrentChannelBW == HT_CHANNEL_WIDTH_40)
- customer_pwr_limit = hal_data->PwrGroupHT40[rf][channel-1];
+ customer_pwr_limit = hal_data->PwrGroupHT40[rf][channel - 1];
else
- customer_pwr_limit = hal_data->PwrGroupHT20[rf][channel-1];
+ customer_pwr_limit = hal_data->PwrGroupHT20[rf][channel - 1];
if (pwr_diff >= customer_pwr_limit)
pwr_diff = 0;
@@ -200,9 +200,9 @@ static void get_rx_power_val_by_reg(struct adapter *adapt, u8 channel,
if (pwr_diff_limit[i] > pwr_diff)
pwr_diff_limit[i] = pwr_diff;
}
- customer_limit = (pwr_diff_limit[3]<<24) |
- (pwr_diff_limit[2]<<16) |
- (pwr_diff_limit[1]<<8) |
+ customer_limit = (pwr_diff_limit[3] << 24) |
+ (pwr_diff_limit[2] << 16) |
+ (pwr_diff_limit[1] << 8) |
(pwr_diff_limit[0]);
write_val = customer_limit + ((index < 2) ? powerbase0[rf] : powerbase1[rf]);
break;
@@ -221,7 +221,7 @@ static void get_rx_power_val_by_reg(struct adapter *adapt, u8 channel,
else if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level2)
write_val = 0x00000000;
- *(out_val+rf) = write_val;
+ *(out_val + rf) = write_val;
}
}
@@ -240,12 +240,12 @@ static void write_ofdm_pwr_reg(struct adapter *adapt, u8 index, u32 *pvalue)
for (rf = 0; rf < 2; rf++) {
write_val = pvalue[rf];
for (i = 0; i < 4; i++) {
- pwr_val[i] = (u8)((write_val & (0x7f<<(i*8)))>>(i*8));
+ pwr_val[i] = (u8)((write_val & (0x7f << (i * 8))) >> (i * 8));
if (pwr_val[i] > RF6052_MAX_TX_PWR)
pwr_val[i] = RF6052_MAX_TX_PWR;
}
- write_val = (pwr_val[3]<<24) | (pwr_val[2]<<16) |
- (pwr_val[1]<<8) | pwr_val[0];
+ write_val = (pwr_val[3] << 24) | (pwr_val[2] << 16) |
+ (pwr_val[1] << 8) | pwr_val[0];
if (rf == 0)
regoffset = regoffset_a[index];
--
2.17.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
