[PATCH 0/5] staging: mt7621-pci-phy: Use only two phys to avoid unstable pcie links

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Mt7621 soc has two phy's for the pcie one of them using just a different
register for settig it up but sharing all the rest of the config. Until
now we was presenting this schema as three different phy's in the device
tree using the 'phy-cells' node property to discriminate an index and setting
up a complete phy for the dual port index. This sometimes worked properly
but reconfiguring the same registers twice presents sometimes some unstable
pcie links and the ports was not properly being detected. The problems
only appears on hard resets and soft resets was properly working. Instead
of having this schema just set two phy's in the device tree and use the
'phy-cells' property to say if the port has or not a dual port. Doing
this configuration and set up becomes easier, LOC is decreased and the
behaviour also gets deterministic with properly and stable pcie links in
both hard and soft resets.

Device tree and controller driver have been also updated to be aligned with
this changes.

Other minor two patches are included in this series:
* One changing a variable in a prunt trace.
* Other to set to NULL gpio descriptor if getting it failed for some reason.

This changes have been tested in gnubee PC1 resulting in a totally working
PCI system without any incidence in more that ten hard resets:

Trace:

[   16.543950] mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 (dual port = 1)
[   16.558831] mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 (dual port = 0)
[   16.673539] mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz
[   16.684656] mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz
[   16.795657] mt7621-pci 1e140000.pcie: PCIE0 enabled
[   16.805374] mt7621-pci 1e140000.pcie: PCIE1 enabled
[   16.815091] mt7621-pci 1e140000.pcie: PCIE2 enabled
[   16.824816] mt7621-pci 1e140000.pcie: PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
[   16.843544] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00
[   16.856224] pci_bus 0000:00: root bus resource [io  0x1e160000-0x1e16ffff]
[   16.869922] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[   16.883619] pci_bus 0000:00: root bus resource [bus 00-ff]
[   16.894613] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[   16.906615] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[   16.919106] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[   16.931676] pci 0000:00:00.0: supports D1
[   16.939668] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[   16.951486] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
[   16.963496] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[   16.975989] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[   16.988546] pci 0000:00:01.0: supports D1
[   16.996538] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[   17.008296] pci 0000:00:02.0: [0e8d:0801] type 01 class 0x060400
[   17.020305] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[   17.032802] pci 0000:00:02.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[   17.045359] pci 0000:00:02.0: supports D1
[   17.053325] pci 0000:00:02.0: PME# supported from D0 D1 D3hot
[   17.065945] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[   17.081913] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[   17.097858] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[   17.114063] pci 0000:01:00.0: [1b21:0611] type 00 class 0x010185
[   17.126080] pci 0000:01:00.0: reg 0x10: [io  0x0000-0x0007]
[   17.137192] pci 0000:01:00.0: reg 0x14: [io  0x0000-0x0003]
[   17.148308] pci 0000:01:00.0: reg 0x18: [io  0x0000-0x0007]
[   17.159426] pci 0000:01:00.0: reg 0x1c: [io  0x0000-0x0003]
[   17.170538] pci 0000:01:00.0: reg 0x20: [io  0x0000-0x000f]
[   17.181656] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x000001ff]
[   17.194293] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
[   17.223008] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[   17.233445] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
[   17.245593] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[   17.259119] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff pref]
[   17.273510] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[   17.286904] pci 0000:02:00.0: [1b21:0611] type 00 class 0x010185
[   17.298927] pci 0000:02:00.0: reg 0x10: [io  0x0000-0x0007]
[   17.310039] pci 0000:02:00.0: reg 0x14: [io  0x0000-0x0003]
[   17.321150] pci 0000:02:00.0: reg 0x18: [io  0x0000-0x0007]
[   17.332262] pci 0000:02:00.0: reg 0x1c: [io  0x0000-0x0003]
[   17.343372] pci 0000:02:00.0: reg 0x20: [io  0x0000-0x000f]
[   17.354484] pci 0000:02:00.0: reg 0x24: [mem 0x00000000-0x000001ff]
[   17.367118] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:01.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
[   17.395830] pci 0000:00:01.0: PCI bridge to [bus 02-ff]
[   17.406265] pci 0000:00:01.0:   bridge window [io  0x0000-0x0fff]
[   17.418411] pci 0000:00:01.0:   bridge window [mem 0x00000000-0x000fffff]
[   17.431935] pci 0000:00:01.0:   bridge window [mem 0x00000000-0x000fffff pref]
[   17.446325] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[   17.459716] pci 0000:03:00.0: [1b21:0611] type 00 class 0x010185
[   17.471731] pci 0000:03:00.0: reg 0x10: [io  0x0000-0x0007]
[   17.482844] pci 0000:03:00.0: reg 0x14: [io  0x0000-0x0003]
[   17.493958] pci 0000:03:00.0: reg 0x18: [io  0x0000-0x0007]
[   17.505069] pci 0000:03:00.0: reg 0x1c: [io  0x0000-0x0003]
[   17.516180] pci 0000:03:00.0: reg 0x20: [io  0x0000-0x000f]
[   17.527291] pci 0000:03:00.0: reg 0x24: [mem 0x00000000-0x000001ff]
[   17.539922] pci 0000:03:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:02.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
[   17.568645] pci 0000:00:02.0: PCI bridge to [bus 03-ff]
[   17.579079] pci 0000:00:02.0:   bridge window [io  0x0000-0x0fff]
[   17.591220] pci 0000:00:02.0:   bridge window [mem 0x00000000-0x000fffff]
[   17.604744] pci 0000:00:02.0:   bridge window [mem 0x00000000-0x000fffff pref]
[   17.619136] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
[   17.632385] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[   17.645563] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[   17.659436] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[   17.672612] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[   17.686482] pci 0000:00:02.0: BAR 0: no space for [mem size 0x80000000]
[   17.699665] pci 0000:00:02.0: BAR 0: failed to assign [mem size 0x80000000]
[   17.713537] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[   17.727064] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
[   17.741455] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
[   17.754981] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref]
[   17.769372] pci 0000:00:02.0: BAR 8: assigned [mem 0x60400000-0x604fffff]
[   17.782899] pci 0000:00:02.0: BAR 9: assigned [mem 0x60500000-0x605fffff pref]
[   17.797290] pci 0000:00:00.0: BAR 1: assigned [mem 0x60600000-0x6060ffff]
[   17.810823] pci 0000:00:01.0: BAR 1: assigned [mem 0x60610000-0x6061ffff]
[   17.824359] pci 0000:00:02.0: BAR 1: assigned [mem 0x60620000-0x6062ffff]
[   17.837888] pci 0000:00:00.0: BAR 7: assigned [io  0x1e160000-0x1e160fff]
[   17.851414] pci 0000:00:01.0: BAR 7: assigned [io  0x1e161000-0x1e161fff]
[   17.864940] pci 0000:00:02.0: BAR 7: assigned [io  0x1e162000-0x1e162fff]
[   17.878482] pci 0000:01:00.0: BAR 5: assigned [mem 0x60000000-0x600001ff]
[   17.892012] pci 0000:01:00.0: BAR 4: assigned [io  0x1e160000-0x1e16000f]
[   17.905543] pci 0000:01:00.0: BAR 0: assigned [io  0x1e160010-0x1e160017]
[   17.919073] pci 0000:01:00.0: BAR 2: assigned [io  0x1e160018-0x1e16001f]
[   17.932604] pci 0000:01:00.0: BAR 1: assigned [io  0x1e160020-0x1e160023]
[   17.946134] pci 0000:01:00.0: BAR 3: assigned [io  0x1e160024-0x1e160027]
[   17.959671] pci 0000:00:00.0: PCI bridge to [bus 01]
[   17.969566] pci 0000:00:00.0:   bridge window [io  0x1e160000-0x1e160fff]
[   17.983090] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
[   17.996614] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x601fffff pref]
[   18.011012] pci 0000:02:00.0: BAR 5: assigned [mem 0x60200000-0x602001ff]
[   18.024542] pci 0000:02:00.0: BAR 4: assigned [io  0x1e161000-0x1e16100f]
[   18.038073] pci 0000:02:00.0: BAR 0: assigned [io  0x1e161010-0x1e161017]
[   18.051604] pci 0000:02:00.0: BAR 2: assigned [io  0x1e161018-0x1e16101f]
[   18.065134] pci 0000:02:00.0: BAR 1: assigned [io  0x1e161020-0x1e161023]
[   18.078666] pci 0000:02:00.0: BAR 3: assigned [io  0x1e161024-0x1e161027]
[   18.092200] pci 0000:00:01.0: PCI bridge to [bus 02]
[   18.102095] pci 0000:00:01.0:   bridge window [io  0x1e161000-0x1e161fff]
[   18.115617] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff]
[   18.129142] pci 0000:00:01.0:   bridge window [mem 0x60300000-0x603fffff pref]
[   18.143540] pci 0000:03:00.0: BAR 5: assigned [mem 0x60400000-0x604001ff]
[   18.157074] pci 0000:03:00.0: BAR 4: assigned [io  0x1e162000-0x1e16200f]
[   18.170606] pci 0000:03:00.0: BAR 0: assigned [io  0x1e162010-0x1e162017]
[   18.184136] pci 0000:03:00.0: BAR 2: assigned [io  0x1e162018-0x1e16201f]
[   18.197667] pci 0000:03:00.0: BAR 1: assigned [io  0x1e162020-0x1e162023]
[   18.211196] pci 0000:03:00.0: BAR 3: assigned [io  0x1e162024-0x1e162027]
[   18.224734] pci 0000:00:02.0: PCI bridge to [bus 03]
[   18.234630] pci 0000:00:02.0:   bridge window [io  0x1e162000-0x1e162fff]
[   18.248153] pci 0000:00:02.0:   bridge window [mem 0x60400000-0x604fffff]
[   18.261675] pci 0000:00:02.0:   bridge window [mem 0x60500000-0x605fffff pref]


Sergio Paracuellos (5):
  staging: mt7621-pci-phy: avoid to create to different phys for a dual
    port one
  staging: mt7621-dts: set up only two pcie phys
  staging: mt7621-pci: use only two phys from device tree
  staging: mt7621-pci: change variable to print for slot
  staging: mt7621-pci: be sure gpio descriptor is null on fails

 drivers/staging/mt7621-dts/mt7621.dtsi        |   6 +-
 .../staging/mt7621-pci-phy/pci-mt7621-phy.c   | 144 +++++++-----------
 drivers/staging/mt7621-pci/pci-mt7621.c       |  13 +-
 3 files changed, 72 insertions(+), 91 deletions(-)

-- 
2.25.1

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux