Geert Uytterhoeven, Fri, Mar 20, 2020 10:15:17 +0100: > On Fri, Mar 20, 2020 at 10:03 AM Alex Riesen <alexander.riesen@xxxxxxxxxxx> wrote: > > Geert Uytterhoeven, Fri, Mar 20, 2020 09:48:14 +0100: > > > On Fri, Mar 20, 2020 at 9:44 AM Alex Riesen <alexander.riesen@xxxxxxxxxxx> wrote: > > > > Laurent Pinchart, Thu, Mar 19, 2020 19:01:25 +0100: > > > > > On Thu, Mar 19, 2020 at 06:42:36PM +0100, Alex Riesen wrote: > > > > > > As the driver has some support for the audio interface of the device, > > > > > > the bindings file should mention it. > > > > > > > > > @@ -16,6 +18,8 @@ Required Properties: > > > > > > slave device on the I2C bus. The main address is mandatory, others are > > > > > > optional and remain at default values if not specified. > > > > > > > > > > > > + - #clock-cells: must be <0> if the I2S port is used > > > > > > > > > > Wouldn't it be simpler to set it to 0 unconditionally ? > > > > > > > > Would it? If the port itself is optional, shouldn't the clock be an option > > > > too? > > > > > > You'd be surprised how many board designers would consider this a cheap > > > 12.288 MHz clock source, without using the I2S port ;-) > > > > Well, I am :-) > > > > Especially considering that the driver will not switch the MCLK pin aktive > > (all I2S-related pins are tristate by default). > > OK, didn't consider that. But that still won't stop the hardware designer. > E.g. on Lager, the clock input of the PMIC is tied to the clock line of an SPI > bus, so to use that feature, the SPI clock must be kept running all the time, > not just when doing a transfer. Well... Maybe there is a convention to spell out the default state of the clock lines? > > And how do I require it to be set unconditionally? By just removing the > > "if ..." part of the statement? > > Indeed. This is still the plain text binding, not yaml. Conversion to YAML is on the list :) Regards, Alex _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
