[PATCH 14/65] staging: wfx: drop wdev->output_power

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Jérôme Pouiller <jerome.pouiller@xxxxxxxxxx>

mac80211 and the device are both able to control tx power per vif. But,
the current code retrieve tx power from wfx_config(). So, it does not
allow to setup the tx power independently for each vif. Driver just has
to rely on bss_conf->txpower to get the correct information.

In add, it is no more necessary to protect access to wdev->output_power
with scan_lock.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@xxxxxxxxxx>
---
 drivers/staging/wfx/scan.c |  4 ++--
 drivers/staging/wfx/sta.c  | 16 ++--------------
 drivers/staging/wfx/wfx.h  |  2 --
 3 files changed, 4 insertions(+), 18 deletions(-)

diff --git a/drivers/staging/wfx/scan.c b/drivers/staging/wfx/scan.c
index 8e0ac89fd28f..5cc9df5eb6a1 100644
--- a/drivers/staging/wfx/scan.c
+++ b/drivers/staging/wfx/scan.c
@@ -60,8 +60,8 @@ static int send_scan_req(struct wfx_vif *wvif,
 	if (timeout < 0)
 		return timeout;
 	ret = wait_for_completion_timeout(&wvif->scan_complete, timeout);
-	if (req->channels[start_idx]->max_power != wvif->wdev->output_power)
-		hif_set_output_power(wvif, wvif->wdev->output_power);
+	if (req->channels[start_idx]->max_power != wvif->vif->bss_conf.txpower)
+		hif_set_output_power(wvif, wvif->vif->bss_conf.txpower);
 	wfx_tx_unlock(wvif->wdev);
 	if (!ret) {
 		dev_notice(wvif->wdev->dev, "scan timeout\n");
diff --git a/drivers/staging/wfx/sta.c b/drivers/staging/wfx/sta.c
index dd2d0422c9ca..a0f19d33e972 100644
--- a/drivers/staging/wfx/sta.c
+++ b/drivers/staging/wfx/sta.c
@@ -503,7 +503,6 @@ static void wfx_do_unjoin(struct wfx_vif *wvif)
 	hif_keep_alive_period(wvif, 0);
 	hif_reset(wvif, false);
 	wfx_tx_policy_init(wvif);
-	hif_set_output_power(wvif, wvif->wdev->output_power);
 	wvif->dtim_period = 0;
 	hif_set_macaddr(wvif, wvif->vif->addr);
 	wfx_free_event_queue(wvif);
@@ -990,11 +989,8 @@ void wfx_bss_info_changed(struct ieee80211_hw *hw,
 					    info->cqm_rssi_hyst);
 	}
 
-	if (changed & BSS_CHANGED_TXPOWER &&
-	    info->txpower != wdev->output_power) {
-		wdev->output_power = info->txpower;
-		hif_set_output_power(wvif, wdev->output_power);
-	}
+	if (changed & BSS_CHANGED_TXPOWER)
+		hif_set_output_power(wvif, info->txpower);
 	mutex_unlock(&wdev->conf_mutex);
 
 	if (do_join)
@@ -1232,7 +1228,6 @@ int wfx_config(struct ieee80211_hw *hw, u32 changed)
 {
 	int ret = 0;
 	struct wfx_dev *wdev = hw->priv;
-	struct ieee80211_conf *conf = &hw->conf;
 	struct wfx_vif *wvif;
 
 	// FIXME: Interface id should not been hardcoded
@@ -1242,13 +1237,7 @@ int wfx_config(struct ieee80211_hw *hw, u32 changed)
 		return 0;
 	}
 
-	mutex_lock(&wvif->scan_lock);
 	mutex_lock(&wdev->conf_mutex);
-	if (changed & IEEE80211_CONF_CHANGE_POWER) {
-		wdev->output_power = conf->power_level;
-		hif_set_output_power(wvif, wdev->output_power);
-	}
-
 	if (changed & IEEE80211_CONF_CHANGE_PS) {
 		wvif = NULL;
 		while ((wvif = wvif_iterate(wdev, wvif)) != NULL)
@@ -1257,7 +1246,6 @@ int wfx_config(struct ieee80211_hw *hw, u32 changed)
 	}
 
 	mutex_unlock(&wdev->conf_mutex);
-	mutex_unlock(&wvif->scan_lock);
 	return ret;
 }
 
diff --git a/drivers/staging/wfx/wfx.h b/drivers/staging/wfx/wfx.h
index ba6e0e923f4b..155dbe5704c9 100644
--- a/drivers/staging/wfx/wfx.h
+++ b/drivers/staging/wfx/wfx.h
@@ -59,8 +59,6 @@ struct wfx_dev {
 
 	struct hif_rx_stats	rx_stats;
 	struct mutex		rx_stats_lock;
-
-	int			output_power;
 };
 
 struct wfx_vif {
-- 
2.25.0

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel




[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux