Change names of functions, their parameters and local variables,
according to coding style.
Patch upholds compileability.
Co-developed-by: Daniel Bauer <daniel.j.bauer@xxxxxx>
Signed-off-by: Daniel Bauer <daniel.j.bauer@xxxxxx>
Signed-off-by: Sven Leykauf <sven_leykauf1@xxxxxx>
---
drivers/staging/sm750fb/ddk750_mode.c | 88 +++++++++++++--------------
1 file changed, 44 insertions(+), 44 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index 35d05ba3c633..ab593f2feb8c 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -14,13 +14,13 @@
* in bit 29:27 of Display Control register.
*/
static unsigned long
-displayControlAdjust_SM750LE(struct mode_parameter *pModeParam,
- unsigned long dispControl)
+display_control_adjust_sm750le(struct mode_parameter *p_mode_param,
+ unsigned long disp_control)
{
unsigned long x, y;
- x = pModeParam->horizontal_display_end;
- y = pModeParam->vertical_display_end;
+ x = p_mode_param->horizontal_display_end;
+ y = p_mode_param->vertical_display_end;
/*
* SM750LE has to set up the top-left and bottom-right
@@ -36,47 +36,47 @@ displayControlAdjust_SM750LE(struct mode_parameter *pModeParam,
((x - 1) & CRT_AUTO_CENTERING_BR_RIGHT_MASK));
/*
- * Assume common fields in dispControl have been properly set before
+ * Assume common fields in disp_control have been properly set before
* calling this function.
- * This function only sets the extra fields in dispControl.
+ * This function only sets the extra fields in disp_control.
*/
/* Clear bit 29:27 of display control register */
- dispControl &= ~CRT_DISPLAY_CTRL_CLK_MASK;
+ disp_control &= ~CRT_DISPLAY_CTRL_CLK_MASK;
/* Set bit 29:27 of display control register for the right clock */
/* Note that SM750LE only need to supported 7 resolutions. */
if (x == 800 && y == 600)
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL41;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL41;
else if (x == 1024 && y == 768)
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL65;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL65;
else if (x == 1152 && y == 864)
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL80;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL80;
else if (x == 1280 && y == 768)
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL80;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL80;
else if (x == 1280 && y == 720)
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL74;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL74;
else if (x == 1280 && y == 960)
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL108;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL108;
else if (x == 1280 && y == 1024)
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL108;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL108;
else /* default to VGA clock */
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL25;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL25;
/* Set bit 25:24 of display controller */
- dispControl |= (CRT_DISPLAY_CTRL_CRTSELECT | CRT_DISPLAY_CTRL_RGBBIT);
+ disp_control |= (CRT_DISPLAY_CTRL_CRTSELECT | CRT_DISPLAY_CTRL_RGBBIT);
/* Set bit 14 of display controller */
- dispControl |= DISPLAY_CTRL_CLOCK_PHASE;
+ disp_control |= DISPLAY_CTRL_CLOCK_PHASE;
- poke32(CRT_DISPLAY_CTRL, dispControl);
+ poke32(CRT_DISPLAY_CTRL, disp_control);
- return dispControl;
+ return disp_control;
}
/* only timing related registers will be programed */
-static int programModeRegisters(struct mode_parameter *pModeParam,
- struct pll_value *pll)
+static int program_mode_registers(struct mode_parameter *p_mode_param,
+ struct pll_value *pll)
{
int ret = 0;
int cnt = 0;
@@ -86,46 +86,46 @@ static int programModeRegisters(struct mode_parameter *pModeParam,
/* programe secondary pixel clock */
poke32(CRT_PLL_CTRL, sm750_format_pll_reg(pll));
- tmp = ((pModeParam->horizontal_total - 1) <<
+ tmp = ((p_mode_param->horizontal_total - 1) <<
CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
CRT_HORIZONTAL_TOTAL_TOTAL_MASK;
- tmp |= (pModeParam->horizontal_display_end - 1) &
+ tmp |= (p_mode_param->horizontal_display_end - 1) &
CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK;
poke32(CRT_HORIZONTAL_TOTAL, tmp);
- tmp = (pModeParam->horizontal_sync_width <<
+ tmp = (p_mode_param->horizontal_sync_width <<
CRT_HORIZONTAL_SYNC_WIDTH_SHIFT) &
CRT_HORIZONTAL_SYNC_WIDTH_MASK;
- tmp |= (pModeParam->horizontal_sync_start - 1) &
+ tmp |= (p_mode_param->horizontal_sync_start - 1) &
CRT_HORIZONTAL_SYNC_START_MASK;
poke32(CRT_HORIZONTAL_SYNC, tmp);
- tmp = ((pModeParam->vertical_total - 1) <<
+ tmp = ((p_mode_param->vertical_total - 1) <<
CRT_VERTICAL_TOTAL_TOTAL_SHIFT) &
CRT_VERTICAL_TOTAL_TOTAL_MASK;
- tmp |= (pModeParam->vertical_display_end - 1) &
+ tmp |= (p_mode_param->vertical_display_end - 1) &
CRT_VERTICAL_TOTAL_DISPLAY_END_MASK;
poke32(CRT_VERTICAL_TOTAL, tmp);
- tmp = ((pModeParam->vertical_sync_height <<
+ tmp = ((p_mode_param->vertical_sync_height <<
CRT_VERTICAL_SYNC_HEIGHT_SHIFT)) &
CRT_VERTICAL_SYNC_HEIGHT_MASK;
- tmp |= (pModeParam->vertical_sync_start - 1) &
+ tmp |= (p_mode_param->vertical_sync_start - 1) &
CRT_VERTICAL_SYNC_START_MASK;
poke32(CRT_VERTICAL_SYNC, tmp);
tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
- if (pModeParam->vertical_sync_polarity)
+ if (p_mode_param->vertical_sync_polarity)
tmp |= DISPLAY_CTRL_VSYNC_PHASE;
- if (pModeParam->horizontal_sync_polarity)
+ if (p_mode_param->horizontal_sync_polarity)
tmp |= DISPLAY_CTRL_HSYNC_PHASE;
if (sm750_get_chip_type() == SM750LE) {
- displayControlAdjust_SM750LE(pModeParam, tmp);
+ display_control_adjust_sm750le(p_mode_param, tmp);
} else {
reg = peek32(CRT_DISPLAY_CTRL) &
~(DISPLAY_CTRL_VSYNC_PHASE |
@@ -140,40 +140,40 @@ static int programModeRegisters(struct mode_parameter *pModeParam,
poke32(PANEL_PLL_CTRL, sm750_format_pll_reg(pll));
- reg = ((pModeParam->horizontal_total - 1) <<
+ reg = ((p_mode_param->horizontal_total - 1) <<
PANEL_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
PANEL_HORIZONTAL_TOTAL_TOTAL_MASK;
- reg |= ((pModeParam->horizontal_display_end - 1) &
+ reg |= ((p_mode_param->horizontal_display_end - 1) &
PANEL_HORIZONTAL_TOTAL_DISPLAY_END_MASK);
poke32(PANEL_HORIZONTAL_TOTAL, reg);
poke32(PANEL_HORIZONTAL_SYNC,
- ((pModeParam->horizontal_sync_width <<
+ ((p_mode_param->horizontal_sync_width <<
PANEL_HORIZONTAL_SYNC_WIDTH_SHIFT) &
PANEL_HORIZONTAL_SYNC_WIDTH_MASK) |
- ((pModeParam->horizontal_sync_start - 1) &
+ ((p_mode_param->horizontal_sync_start - 1) &
PANEL_HORIZONTAL_SYNC_START_MASK));
poke32(PANEL_VERTICAL_TOTAL,
- (((pModeParam->vertical_total - 1) <<
+ (((p_mode_param->vertical_total - 1) <<
PANEL_VERTICAL_TOTAL_TOTAL_SHIFT) &
PANEL_VERTICAL_TOTAL_TOTAL_MASK) |
- ((pModeParam->vertical_display_end - 1) &
+ ((p_mode_param->vertical_display_end - 1) &
PANEL_VERTICAL_TOTAL_DISPLAY_END_MASK));
poke32(PANEL_VERTICAL_SYNC,
- ((pModeParam->vertical_sync_height <<
+ ((p_mode_param->vertical_sync_height <<
PANEL_VERTICAL_SYNC_HEIGHT_SHIFT) &
PANEL_VERTICAL_SYNC_HEIGHT_MASK) |
- ((pModeParam->vertical_sync_start - 1) &
+ ((p_mode_param->vertical_sync_start - 1) &
PANEL_VERTICAL_SYNC_START_MASK));
tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
- if (pModeParam->vertical_sync_polarity)
+ if (p_mode_param->vertical_sync_polarity)
tmp |= DISPLAY_CTRL_VSYNC_PHASE;
- if (pModeParam->horizontal_sync_polarity)
+ if (p_mode_param->horizontal_sync_polarity)
tmp |= DISPLAY_CTRL_HSYNC_PHASE;
- if (pModeParam->clock_phase_polarity)
+ if (p_mode_param->clock_phase_polarity)
tmp |= DISPLAY_CTRL_CLOCK_PHASE;
reserved = PANEL_DISPLAY_CTRL_RESERVED_MASK |
@@ -220,6 +220,6 @@ int ddk750_set_mode_timing(struct mode_parameter *parm, enum clock_type clock)
outb_p(0x88, 0x3d4);
outb_p(0x06, 0x3d5);
}
- programModeRegisters(parm, &pll);
+ program_mode_registers(parm, &pll);
return 0;
}
--
2.20.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
