Change names of macros, according to coding style.
Patch upholds compileability.
Co-developed-by: Daniel Bauer <daniel.j.bauer@xxxxxx>
Signed-off-by: Daniel Bauer <daniel.j.bauer@xxxxxx>
Signed-off-by: Sven Leykauf <sven_leykauf1@xxxxxx>
---
drivers/staging/sm750fb/ddk750_sii164.c | 48 ++++++++++++-------------
1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_sii164.c b/drivers/staging/sm750fb/ddk750_sii164.c
index e70d2048cd62..f36b9e012cd9 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.c
+++ b/drivers/staging/sm750fb/ddk750_sii164.c
@@ -12,11 +12,11 @@
#define USE_HW_I2C
#ifdef USE_HW_I2C
- #define i2cWriteReg sm750_hw_i2c_write_reg
- #define i2cReadReg sm750_hw_i2c_read_reg
+ #define i2c_write_reg sm750_hw_i2c_write_reg
+ #define i2c_read_reg sm750_hw_i2c_read_reg
#else
- #define i2cWriteReg sm750_sw_i2c_write_reg
- #define i2cReadReg sm750_sw_i2c_read_reg
+ #define i2c_write_reg sm750_sw_i2c_write_reg
+ #define i2c_read_reg sm750_sw_i2c_read_reg
#endif
/* SII164 Vendor and Device ID */
@@ -39,9 +39,9 @@ unsigned short sii164_get_vendor_id(void)
{
unsigned short vendor_id;
- vendor_id = ((unsigned short)i2cReadReg(SII164_I2C_ADDRESS,
+ vendor_id = ((unsigned short)i2c_read_reg(SII164_I2C_ADDRESS,
SII164_VENDOR_ID_HIGH) << 8) |
- (unsigned short)i2cReadReg(SII164_I2C_ADDRESS,
+ (unsigned short)i2c_read_reg(SII164_I2C_ADDRESS,
SII164_VENDOR_ID_LOW);
return vendor_id;
@@ -58,9 +58,9 @@ unsigned short sii164_get_device_id(void)
{
unsigned short device_id;
- device_id = ((unsigned short)i2cReadReg(SII164_I2C_ADDRESS,
+ device_id = ((unsigned short)i2c_read_reg(SII164_I2C_ADDRESS,
SII164_DEVICE_ID_HIGH) << 8) |
- (unsigned short)i2cReadReg(SII164_I2C_ADDRESS,
+ (unsigned short)i2c_read_reg(SII164_I2C_ADDRESS,
SII164_DEVICE_ID_LOW);
return device_id;
@@ -176,7 +176,7 @@ long sii164_init_chip(unsigned char edge_select,
else
config |= SII164_CONFIGURATION_VSYNC_AS_IS;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
/*
* De-skew enabled with default 111b value.
@@ -214,7 +214,7 @@ long sii164_init_chip(unsigned char edge_select,
config |= SII164_DESKEW_8_STEP;
break;
}
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_DESKEW, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_DESKEW, config);
/* Enable/Disable Continuous Sync. */
if (continuous_sync_enable == 0)
@@ -231,12 +231,12 @@ long sii164_init_chip(unsigned char edge_select,
/* Set the PLL Filter value */
config |= ((pll_filter_value & 0x07) << 1);
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_PLL, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_PLL, config);
/* Recover from Power Down and enable output. */
- config = i2cReadReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
+ config = i2c_read_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
config |= SII164_CONFIGURATION_POWER_NORMAL;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
return 0;
}
@@ -283,17 +283,17 @@ void sii164_set_power(unsigned char power_up)
{
unsigned char config;
- config = i2cReadReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
+ config = i2c_read_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
if (power_up == 1) {
/* Power up the chip */
config &= ~SII164_CONFIGURATION_POWER_MASK;
config |= SII164_CONFIGURATION_POWER_NORMAL;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
} else {
/* Power down the chip */
config &= ~SII164_CONFIGURATION_POWER_MASK;
config |= SII164_CONFIGURATION_POWER_DOWN;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
}
}
@@ -306,7 +306,7 @@ void sii164_select_hot_plug_detection_mode(enum sii164_hot_plug_mode hot_plug_mo
{
unsigned char detect_reg;
- detect_reg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) &
+ detect_reg = i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT) &
~SII164_DETECT_MONITOR_SENSE_OUTPUT_FLAG;
switch (hot_plug_mode) {
case SII164_HOTPLUG_DISABLE:
@@ -325,7 +325,7 @@ void sii164_select_hot_plug_detection_mode(enum sii164_hot_plug_mode hot_plug_mo
break;
}
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_DETECT, detect_reg);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_DETECT, detect_reg);
}
/*
@@ -338,7 +338,7 @@ void sii164_enable_hot_plug_detection(unsigned char enable_hot_plug)
{
unsigned char detect_reg;
- detect_reg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT);
+ detect_reg = i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT);
/* Depending on each DVI controller, need to enable the hot plug based
* on each individual chip design.
@@ -361,7 +361,7 @@ unsigned char sii164_is_connected(void)
{
unsigned char hot_plug_value;
- hot_plug_value = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) &
+ hot_plug_value = i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT) &
SII164_DETECT_HOT_PLUG_STATUS_MASK;
if (hot_plug_value == SII164_DETECT_HOT_PLUG_STATUS_ON)
return 1;
@@ -381,7 +381,7 @@ unsigned char sii164_check_interrupt(void)
{
unsigned char detect_reg;
- detect_reg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) &
+ detect_reg = i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT) &
SII164_DETECT_MONITOR_STATE_MASK;
if (detect_reg == SII164_DETECT_MONITOR_STATE_CHANGE)
return 1;
@@ -398,9 +398,9 @@ void sii164_clear_interrupt(void)
unsigned char detect_reg;
/* Clear the MDI interrupt */
- detect_reg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT);
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_DETECT,
- detect_reg | SII164_DETECT_MONITOR_STATE_CLEAR);
+ detect_reg = i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_DETECT,
+ detect_reg | SII164_DETECT_MONITOR_STATE_CLEAR);
}
#endif
--
2.20.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
