Change names of variables and functions into proper names,
according to coding style.
Patch upholds compileability by considering dependencies.
Co-developed-by: Daniel Bauer <daniel.j.bauer@xxxxxx>
Signed-off-by: Daniel Bauer <daniel.j.bauer@xxxxxx>
Signed-off-by: Sven Leykauf <sven_leykauf1@xxxxxx>
---
drivers/staging/sm750fb/ddk750_dvi.c | 50 +++----
drivers/staging/sm750fb/ddk750_dvi.h | 64 ++++-----
drivers/staging/sm750fb/ddk750_sii164.c | 171 ++++++++++++------------
drivers/staging/sm750fb/ddk750_sii164.h | 40 +++---
4 files changed, 162 insertions(+), 163 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_dvi.c b/drivers/staging/sm750fb/ddk750_dvi.c
index cd564ea40779..930f56d91474 100644
--- a/drivers/staging/sm750fb/ddk750_dvi.c
+++ b/drivers/staging/sm750fb/ddk750_dvi.c
@@ -11,41 +11,41 @@
* function API. Please set the function pointer to NULL whenever the function
* is not supported.
*/
-static struct dvi_ctrl_device g_dcftSupportedDviController[] = {
+static struct dvi_ctrl_device g_dcft_supported_dvi_controller[] = {
#ifdef DVI_CTRL_SII164
{
- .pfnInit = sii164InitChip,
- .pfnGetVendorId = sii164GetVendorID,
- .pfnGetDeviceId = sii164GetDeviceID,
+ .pfn_init = sii164_init_chip,
+ .pfn_get_vendor_id = sii164_get_vendor_id,
+ .pfn_get_device_id = sii164_get_device_id,
#ifdef SII164_FULL_FUNCTIONS
- .pfnResetChip = sii164ResetChip,
- .pfnGetChipString = sii164GetChipString,
- .pfnSetPower = sii164SetPower,
- .pfnEnableHotPlugDetection = sii164EnableHotPlugDetection,
- .pfnIsConnected = sii164IsConnected,
- .pfnCheckInterrupt = sii164CheckInterrupt,
- .pfnClearInterrupt = sii164ClearInterrupt,
+ .pfn_reset_chip = sii164_reset_chip,
+ .pfn_get_chip_string = sii164_get_chip_string,
+ .pfn_set_power = sii164_set_power,
+ .pfn_enable_hot_plug_detection = sii164_enable_hot_plug_detection,
+ .pfn_is_connected = sii164_is_connected,
+ .pfn_check_interrupt = sii164_check_interrupt,
+ .pfn_clear_interrupt = sii164_clear_interrupt,
#endif
},
#endif
};
-int dviInit(unsigned char edge_select,
- unsigned char bus_select,
- unsigned char dual_edge_clk_select,
- unsigned char hsync_enable,
- unsigned char vsync_enable,
- unsigned char deskew_enable,
- unsigned char deskew_setting,
- unsigned char continuous_sync_enable,
- unsigned char pll_filter_enable,
- unsigned char pll_filter_value)
+int dvi_init(unsigned char edge_select,
+ unsigned char bus_select,
+ unsigned char dual_edge_clk_select,
+ unsigned char hsync_enable,
+ unsigned char vsync_enable,
+ unsigned char deskew_enable,
+ unsigned char deskew_setting,
+ unsigned char continuous_sync_enable,
+ unsigned char pll_filter_enable,
+ unsigned char pll_filter_value)
{
- struct dvi_ctrl_device *pCurrentDviCtrl;
+ struct dvi_ctrl_device *p_current_dvi_ctrl;
- pCurrentDviCtrl = g_dcftSupportedDviController;
- if (pCurrentDviCtrl->pfnInit) {
- return pCurrentDviCtrl->pfnInit(edge_select,
+ p_current_dvi_ctrl = g_dcft_supported_dvi_controller;
+ if (p_current_dvi_ctrl->pfn_init) {
+ return p_current_dvi_ctrl->pfn_init(edge_select,
bus_select,
dual_edge_clk_select,
hsync_enable,
diff --git a/drivers/staging/sm750fb/ddk750_dvi.h b/drivers/staging/sm750fb/ddk750_dvi.h
index 1c7a565b617a..d3ea365d1509 100644
--- a/drivers/staging/sm750fb/ddk750_dvi.h
+++ b/drivers/staging/sm750fb/ddk750_dvi.h
@@ -4,54 +4,54 @@
/* dvi chip stuffs structros */
-typedef long (*PFN_DVICTRL_INIT)(unsigned char edgeSelect,
- unsigned char busSelect,
- unsigned char dualEdgeClkSelect,
- unsigned char hsyncEnable,
- unsigned char vsyncEnable,
- unsigned char deskewEnable,
- unsigned char deskewSetting,
- unsigned char continuousSyncEnable,
- unsigned char pllFilterEnable,
- unsigned char pllFilterValue);
+typedef long (*PFN_DVICTRL_INIT)(unsigned char edge_select,
+ unsigned char bus_select,
+ unsigned char dual_edge_clk_select,
+ unsigned char hsync_enable,
+ unsigned char vsync_enable,
+ unsigned char deskew_enable,
+ unsigned char deskew_setting,
+ unsigned char continuous_sync_enable,
+ unsigned char pll_filter_enable,
+ unsigned char pll_filter_value);
typedef void (*PFN_DVICTRL_RESETCHIP)(void);
typedef char* (*PFN_DVICTRL_GETCHIPSTRING)(void);
typedef unsigned short (*PFN_DVICTRL_GETVENDORID)(void);
typedef unsigned short (*PFN_DVICTRL_GETDEVICEID)(void);
-typedef void (*PFN_DVICTRL_SETPOWER)(unsigned char powerUp);
-typedef void (*PFN_DVICTRL_HOTPLUGDETECTION)(unsigned char enableHotPlug);
+typedef void (*PFN_DVICTRL_SETPOWER)(unsigned char power_up);
+typedef void (*PFN_DVICTRL_HOTPLUGDETECTION)(unsigned char enable_hot_plug);
typedef unsigned char (*PFN_DVICTRL_ISCONNECTED)(void);
typedef unsigned char (*PFN_DVICTRL_CHECKINTERRUPT)(void);
typedef void (*PFN_DVICTRL_CLEARINTERRUPT)(void);
/* Structure to hold all the function pointer to the DVI Controller. */
struct dvi_ctrl_device {
- PFN_DVICTRL_INIT pfnInit;
- PFN_DVICTRL_RESETCHIP pfnResetChip;
- PFN_DVICTRL_GETCHIPSTRING pfnGetChipString;
- PFN_DVICTRL_GETVENDORID pfnGetVendorId;
- PFN_DVICTRL_GETDEVICEID pfnGetDeviceId;
- PFN_DVICTRL_SETPOWER pfnSetPower;
- PFN_DVICTRL_HOTPLUGDETECTION pfnEnableHotPlugDetection;
- PFN_DVICTRL_ISCONNECTED pfnIsConnected;
- PFN_DVICTRL_CHECKINTERRUPT pfnCheckInterrupt;
- PFN_DVICTRL_CLEARINTERRUPT pfnClearInterrupt;
+ PFN_DVICTRL_INIT pfn_init;
+ PFN_DVICTRL_RESETCHIP pfn_reset_chip;
+ PFN_DVICTRL_GETCHIPSTRING pfn_get_chip_string;
+ PFN_DVICTRL_GETVENDORID pfn_get_vendor_id;
+ PFN_DVICTRL_GETDEVICEID pfn_get_device_id;
+ PFN_DVICTRL_SETPOWER pfn_set_power;
+ PFN_DVICTRL_HOTPLUGDETECTION pfn_enable_hot_plug_detection;
+ PFN_DVICTRL_ISCONNECTED pfn_is_connected;
+ PFN_DVICTRL_CHECKINTERRUPT pfn_check_interrupt;
+ PFN_DVICTRL_CLEARINTERRUPT pfn_clear_interrupt;
};
#define DVI_CTRL_SII164
/* dvi functions prototype */
-int dviInit(unsigned char edgeSelect,
- unsigned char busSelect,
- unsigned char dualEdgeClkSelect,
- unsigned char hsyncEnable,
- unsigned char vsyncEnable,
- unsigned char deskewEnable,
- unsigned char deskewSetting,
- unsigned char continuousSyncEnable,
- unsigned char pllFilterEnable,
- unsigned char pllFilterValue);
+int dvi_init(unsigned char edge_select,
+ unsigned char bus_select,
+ unsigned char dual_edge_clk_select,
+ unsigned char hsync_enable,
+ unsigned char vsync_enable,
+ unsigned char deskew_enable,
+ unsigned char deskew_setting,
+ unsigned char continuous_sync_enable,
+ unsigned char pll_filter_enable,
+ unsigned char pll_filter_value);
#endif
diff --git a/drivers/staging/sm750fb/ddk750_sii164.c b/drivers/staging/sm750fb/ddk750_sii164.c
index 73e0e9f41ec5..781eceb2f402 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.c
+++ b/drivers/staging/sm750fb/ddk750_sii164.c
@@ -12,11 +12,11 @@
#define USE_HW_I2C
#ifdef USE_HW_I2C
- #define i2cWriteReg sm750_hw_i2c_write_reg
- #define i2cReadReg sm750_hw_i2c_read_reg
+ #define i2c_write_reg sm750_hw_i2c_write_reg
+ #define i2c_read_reg sm750_hw_i2c_read_reg
#else
- #define i2cWriteReg sm750_sw_i2c_write_reg
- #define i2cReadReg sm750_sw_i2c_read_reg
+ #define i2c_write_reg sm750_sw_i2c_write_reg
+ #define i2c_read_reg sm750_sw_i2c_read_reg
#endif
/* SII164 Vendor and Device ID */
@@ -25,45 +25,45 @@
#ifdef SII164_FULL_FUNCTIONS
/* Name of the DVI Controller chip */
-static char *gDviCtrlChipName = "Silicon Image SiI 164";
+static char *g_dvi_ctrl_chip_name = "Silicon Image SiI 164";
#endif
/*
- * sii164GetVendorID
+ * sii164_get_vendor_id
* This function gets the vendor ID of the DVI controller chip.
*
* Output:
* Vendor ID
*/
-unsigned short sii164GetVendorID(void)
+unsigned short sii164_get_vendor_id(void)
{
- unsigned short vendorID;
+ unsigned short vendor_id;
- vendorID = ((unsigned short)i2cReadReg(SII164_I2C_ADDRESS,
+ vendor_id = ((unsigned short)i2c_read_reg(SII164_I2C_ADDRESS,
SII164_VENDOR_ID_HIGH) << 8) |
- (unsigned short)i2cReadReg(SII164_I2C_ADDRESS,
+ (unsigned short)i2c_read_reg(SII164_I2C_ADDRESS,
SII164_VENDOR_ID_LOW);
- return vendorID;
+ return vendor_id;
}
/*
- * sii164GetDeviceID
+ * sii164_get_gevice_id
* This function gets the device ID of the DVI controller chip.
*
* Output:
* Device ID
*/
-unsigned short sii164GetDeviceID(void)
+unsigned short sii164_get_device_id(void)
{
- unsigned short deviceID;
+ unsigned short device_id;
- deviceID = ((unsigned short)i2cReadReg(SII164_I2C_ADDRESS,
+ device_id = ((unsigned short)i2c_read_reg(SII164_I2C_ADDRESS,
SII164_DEVICE_ID_HIGH) << 8) |
- (unsigned short)i2cReadReg(SII164_I2C_ADDRESS,
+ (unsigned short)i2c_read_reg(SII164_I2C_ADDRESS,
SII164_DEVICE_ID_LOW);
- return deviceID;
+ return device_id;
}
/*
@@ -72,7 +72,7 @@ unsigned short sii164GetDeviceID(void)
*/
/*
- * sii164InitChip
+ * sii164_init_chip
* This function initialize and detect the DVI controller chip.
*
* Input:
@@ -118,16 +118,16 @@ unsigned short sii164GetDeviceID(void)
* 0 - Success
* -1 - Fail.
*/
-long sii164InitChip(unsigned char edge_select,
- unsigned char bus_select,
- unsigned char dual_edge_clk_select,
- unsigned char hsync_enable,
- unsigned char vsync_enable,
- unsigned char deskew_enable,
- unsigned char deskew_setting,
- unsigned char continuous_sync_enable,
- unsigned char pll_filter_enable,
- unsigned char pll_filter_value)
+long sii164_init_chip(unsigned char edge_select,
+ unsigned char bus_select,
+ unsigned char dual_edge_clk_select,
+ unsigned char hsync_enable,
+ unsigned char vsync_enable,
+ unsigned char deskew_enable,
+ unsigned char deskew_setting,
+ unsigned char continuous_sync_enable,
+ unsigned char pll_filter_enable,
+ unsigned char pll_filter_value)
{
unsigned char config;
@@ -140,8 +140,8 @@ long sii164InitChip(unsigned char edge_select,
#endif
/* Check if SII164 Chip exists */
- if ((sii164GetVendorID() == SII164_VENDOR_ID) &&
- (sii164GetDeviceID() == SII164_DEVICE_ID)) {
+ if ((sii164_get_vendor_id() == SII164_VENDOR_ID) &&
+ (sii164_get_device_id() == SII164_DEVICE_ID)) {
/*
* Initialize SII164 controller chip.
*/
@@ -176,7 +176,7 @@ long sii164InitChip(unsigned char edge_select,
else
config |= SII164_CONFIGURATION_VSYNC_AS_IS;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
/*
* De-skew enabled with default 111b value.
@@ -214,7 +214,7 @@ long sii164InitChip(unsigned char edge_select,
config |= SII164_DESKEW_8_STEP;
break;
}
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_DESKEW, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_DESKEW, config);
/* Enable/Disable Continuous Sync. */
if (continuous_sync_enable == 0)
@@ -231,12 +231,12 @@ long sii164InitChip(unsigned char edge_select,
/* Set the PLL Filter value */
config |= ((pll_filter_value & 0x07) << 1);
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_PLL, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_PLL, config);
/* Recover from Power Down and enable output. */
- config = i2cReadReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
+ config = i2c_read_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
config |= SII164_CONFIGURATION_POWER_NORMAL;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
return 0;
}
@@ -250,157 +250,156 @@ long sii164InitChip(unsigned char edge_select,
#ifdef SII164_FULL_FUNCTIONS
/*
- * sii164ResetChip
+ * sii164_reset_chip
* This function resets the DVI Controller Chip.
*/
-void sii164ResetChip(void)
+void sii164_reset_chip(void)
{
/* Power down */
- sii164SetPower(0);
- sii164SetPower(1);
+ sii164_set_power(0);
+ sii164_set_power(1);
}
/*
- * sii164GetChipString
+ * sii164_get_chip_string
* This function returns a char string name of the current DVI Controller
* chip.
*
* It's convenient for application need to display the chip name.
*/
-char *sii164GetChipString(void)
+char *sii164_get_chip_string(void)
{
- return gDviCtrlChipName;
+ return g_dvi_ctrl_chip_name;
}
/*
- * sii164SetPower
+ * sii164_set_power
* This function sets the power configuration of the DVI Controller Chip.
*
* Input:
- * powerUp - Flag to set the power down or up
+ * power_up - Flag to set the power down or up
*/
-void sii164SetPower(unsigned char powerUp)
+void sii164_set_power(unsigned char power_up)
{
unsigned char config;
- config = i2cReadReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
- if (powerUp == 1) {
+ config = i2c_read_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
+ if (power_up == 1) {
/* Power up the chip */
config &= ~SII164_CONFIGURATION_POWER_MASK;
config |= SII164_CONFIGURATION_POWER_NORMAL;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
} else {
/* Power down the chip */
config &= ~SII164_CONFIGURATION_POWER_MASK;
config |= SII164_CONFIGURATION_POWER_DOWN;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
}
}
/*
- * sii164SelectHotPlugDetectionMode
+ * sii164_select_hot_plug_detection_mode
* This function selects the mode of the hot plug detection.
*/
-static
-void sii164SelectHotPlugDetectionMode(enum sii164_hot_plug_mode hotPlugMode)
+static void sii164_select_hot_plug_detection_mode(enum sii164_hot_plug_mode hot_plug_mode)
{
- unsigned char detectReg;
+ unsigned char detect_reg;
- detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) &
+ detect_reg = i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT) &
~SII164_DETECT_MONITOR_SENSE_OUTPUT_FLAG;
- switch (hotPlugMode) {
+ switch (hot_plug_mode) {
case SII164_HOTPLUG_DISABLE:
- detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HIGH;
+ detect_reg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HIGH;
break;
case SII164_HOTPLUG_USE_MDI:
- detectReg &= ~SII164_DETECT_INTERRUPT_MASK;
- detectReg |= SII164_DETECT_INTERRUPT_BY_HTPLG_PIN;
- detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_MDI;
+ detect_reg &= ~SII164_DETECT_INTERRUPT_MASK;
+ detect_reg |= SII164_DETECT_INTERRUPT_BY_HTPLG_PIN;
+ detect_reg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_MDI;
break;
case SII164_HOTPLUG_USE_RSEN:
- detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_RSEN;
+ detect_reg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_RSEN;
break;
case SII164_HOTPLUG_USE_HTPLG:
- detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HTPLG;
+ detect_reg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HTPLG;
break;
}
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_DETECT, detectReg);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_DETECT, detect_reg);
}
/*
- * sii164EnableHotPlugDetection
+ * sii164_enable_hot_plug_detection
* This function enables the Hot Plug detection.
*
- * enableHotPlug - Enable (=1) / disable (=0) Hot Plug detection
+ * enable_hot_plug - Enable (=1) / disable (=0) Hot Plug detection
*/
-void sii164EnableHotPlugDetection(unsigned char enableHotPlug)
+void sii164_enable_hot_plug_detection(unsigned char enable_hot_plug)
{
- unsigned char detectReg;
+ unsigned char detect_reg;
- detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT);
+ detect_reg = i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT);
/* Depending on each DVI controller, need to enable the hot plug based
* on each individual chip design.
*/
- if (enableHotPlug != 0)
- sii164SelectHotPlugDetectionMode(SII164_HOTPLUG_USE_MDI);
+ if (enable_hot_plug != 0)
+ sii164_select_hot_plug_detection_mode(SII164_HOTPLUG_USE_MDI);
else
- sii164SelectHotPlugDetectionMode(SII164_HOTPLUG_DISABLE);
+ sii164_select_hot_plug_detection_mode(SII164_HOTPLUG_DISABLE);
}
/*
- * sii164IsConnected
+ * sii164_is_connected
* Check if the DVI Monitor is connected.
*
* Output:
* 0 - Not Connected
* 1 - Connected
*/
-unsigned char sii164IsConnected(void)
+unsigned char sii164_is_connected(void)
{
- unsigned char hotPlugValue;
+ unsigned char hot_plug_value;
- hotPlugValue = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) &
+ hot_plug_value = i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT) &
SII164_DETECT_HOT_PLUG_STATUS_MASK;
- if (hotPlugValue == SII164_DETECT_HOT_PLUG_STATUS_ON)
+ if (hot_plug_value == SII164_DETECT_HOT_PLUG_STATUS_ON)
return 1;
else
return 0;
}
/*
- * sii164CheckInterrupt
+ * sii164_check_interrupt
* Checks if interrupt has occurred.
*
* Output:
* 0 - No interrupt
* 1 - Interrupt occurs
*/
-unsigned char sii164CheckInterrupt(void)
+unsigned char sii164_check_interrupt(void)
{
- unsigned char detectReg;
+ unsigned char detect_reg;
- detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) &
+ detect_reg = i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT) &
SII164_DETECT_MONITOR_STATE_MASK;
- if (detectReg == SII164_DETECT_MONITOR_STATE_CHANGE)
+ if (detect_reg == SII164_DETECT_MONITOR_STATE_CHANGE)
return 1;
else
return 0;
}
/*
- * sii164ClearInterrupt
+ * sii164_clear_interrupt
* Clear the hot plug interrupt.
*/
-void sii164ClearInterrupt(void)
+void sii164_clear_interrupt(void)
{
- unsigned char detectReg;
+ unsigned char detect_reg;
/* Clear the MDI interrupt */
- detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT);
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_DETECT,
- detectReg | SII164_DETECT_MONITOR_STATE_CLEAR);
+ detect_reg = i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_DETECT,
+ detect_reg | SII164_DETECT_MONITOR_STATE_CLEAR);
}
#endif
diff --git a/drivers/staging/sm750fb/ddk750_sii164.h b/drivers/staging/sm750fb/ddk750_sii164.h
index d940cb729066..737b0e4869ff 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.h
+++ b/drivers/staging/sm750fb/ddk750_sii164.h
@@ -16,28 +16,28 @@ enum sii164_hot_plug_mode {
};
/* Silicon Image SiI164 chip prototype */
-long sii164InitChip(unsigned char edgeSelect,
- unsigned char busSelect,
- unsigned char dualEdgeClkSelect,
- unsigned char hsyncEnable,
- unsigned char vsyncEnable,
- unsigned char deskewEnable,
- unsigned char deskewSetting,
- unsigned char continuousSyncEnable,
- unsigned char pllFilterEnable,
- unsigned char pllFilterValue);
-
-unsigned short sii164GetVendorID(void);
-unsigned short sii164GetDeviceID(void);
+long sii164_init_chip(unsigned char edge_select,
+ unsigned char bus_select,
+ unsigned char dual_edge_clk_select,
+ unsigned char hsync_enable,
+ unsigned char vsync_enable,
+ unsigned char deskew_enable,
+ unsigned char deskew_setting,
+ unsigned char continuous_sync_enable,
+ unsigned char pll_filter_enable,
+ unsigned char pll_filter_value);
+
+unsigned short sii164_get_vendor_id(void);
+unsigned short sii164_get_device_id(void);
#ifdef SII164_FULL_FUNCTIONS
-void sii164ResetChip(void);
-char *sii164GetChipString(void);
-void sii164SetPower(unsigned char powerUp);
-void sii164EnableHotPlugDetection(unsigned char enableHotPlug);
-unsigned char sii164IsConnected(void);
-unsigned char sii164CheckInterrupt(void);
-void sii164ClearInterrupt(void);
+void sii164_reset_chip(void);
+char *sii164_get_chip_string(void);
+void sii164_set_power(unsigned char power_up);
+void sii164_enable_hot_plug_detection(unsigned char enable_hot_plug);
+unsigned char sii164_is_connected(void);
+unsigned char sii164_check_interrupt(void);
+void sii164_clear_interrupt(void);
#endif
/*
* below register definition is used for
--
2.20.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
