Signed-off-by: Gabriela Bittencourt <gabrielabittencourt00@xxxxxxxxx>
---
drivers/staging/sm750fb/sm750_accel.c | 65 +++++++++++++++------------
1 file changed, 37 insertions(+), 28 deletions(-)
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index dbcbbd1055da..d5564cd60f3b 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -130,20 +130,24 @@ int sm750_hw_fillrect(struct lynx_accel *accel,
return 0;
}
-int sm750_hw_copyarea(
-struct lynx_accel *accel,
-unsigned int sBase, /* Address of source: offset in frame buffer */
-unsigned int sPitch, /* Pitch value of source surface in BYTE */
-unsigned int sx,
-unsigned int sy, /* Starting coordinate of source surface */
-unsigned int dBase, /* Address of destination: offset in frame buffer */
-unsigned int dPitch, /* Pitch value of destination surface in BYTE */
-unsigned int Bpp, /* Color depth of destination surface */
-unsigned int dx,
-unsigned int dy, /* Starting coordinate of destination surface */
-unsigned int width,
-unsigned int height, /* width and height of rectangle in pixel value */
-unsigned int rop2) /* ROP value */
+/**
Missing function name and short description. Documentation/doc-guide/kernel-doc.rst says:
The general format of a function and function-like macro kernel-doc comment is::
/**
* function_name() - Brief description of function.
* @arg1: Describe the first argument.
* @arg2: Describe the second argument.
* One can provide multiple line descriptions
* for arguments.
*
* A longer description, with more discussion of the function function_name()
* that might be useful to those using or modifying it. Begins with an
* empty comment line, and may include additional embedded empty
* comment lines.
*
* The longer description may have multiple paragraphs.
*
* Context: Describes whether the function can sleep, what locks it takes,
* releases, or expects to be held. It can extend over multiple
* lines.
* Return: Describe the return value of function_name.
*
* The return value description can also have multiple paragraphs, and should
* be placed at the end of the comment block.
*/
+ * @sBase: Address of source: offset in frame buffer
+ * @sPitch: Pitch value of source surface in BYTE
+ * @sx, @sy: Starting coordinate of source surface
Those should be on separate lines.
+ * @dBase: Address of destination: offset in frame buffer
+ * @dPitch: Pitch value of destination surface in BYTE
+ * @Bpp: Color depth of destination surface
+ * @dx, @dy: Starting coordinate of destination surface
Ditto.
+ * @width, @height: width and height of rectangle in pixel value
+ * @rop2: ROP value
+ */
+int sm750_hw_copyarea(struct lynx_accel *accel,
+ unsigned int sBase, unsigned int sPitch,
+ unsigned int sx, unsigned int sy,
+ unsigned int dBase, unsigned int dPitch,
+ unsigned int Bpp, unsigned int dx, unsigned int dy,
+ unsigned int width, unsigned int height,
+ unsigned int rop2)
{
unsigned int nDirection, de_ctrl;
@@ -288,20 +292,25 @@ static unsigned int deGetTransparency(struct lynx_accel *accel)
return de_ctrl;
}
-int sm750_hw_imageblit(struct lynx_accel *accel,
- const char *pSrcbuf, /* pointer to start of source buffer in system memory */
- u32 srcDelta, /* Pitch value (in bytes) of the source buffer, +ive means top down and -ive mean button up */
- u32 startBit, /* Mono data can start at any bit in a byte, this value should be 0 to 7 */
- u32 dBase, /* Address of destination: offset in frame buffer */
- u32 dPitch, /* Pitch value of destination surface in BYTE */
- u32 bytePerPixel, /* Color depth of destination surface */
- u32 dx,
- u32 dy, /* Starting coordinate of destination surface */
- u32 width,
- u32 height, /* width and height of rectangle in pixel value */
- u32 fColor, /* Foreground color (corresponding to a 1 in the monochrome data */
- u32 bColor, /* Background color (corresponding to a 0 in the monochrome data */
- u32 rop2) /* ROP value */
+/**
Similar comments here...
+ * @pSrcbuf: pointer to start of source buffer in system memory
+ * @srcDelta: Pitch value (in bytes) of the source buffer, +ive means top down
+ * and -ive mean button up
+ * @startBit: Mono data can start at any bit in a byte, this value should be
+ * 0 to 7
+ * @dBase: Address of destination: offset in frame buffer
+ * @dPitch: Pitch value of destination surface in BYTE
+ * @bytePerPixel: Color depth of destination surface
+ * @dx, @dy: Starting coordinate of destination surface
+ * @width, @height: width and height of rectangle in pixel value
+ * @fColor: Foreground color (corresponding to a 1 in the monochrome data
+ * @bColor: Background color (corresponding to a 0 in the monochrome data
+ * @rop2: ROP value
+ */
+int sm750_hw_imageblit(struct lynx_accel *accel, const char *pSrcbuf,
+ u32 srcDelta, u32 startBit, u32 dBase, u32 dPitch,
+ u32 bytePerPixel, u32 dx, u32 dy, u32 width,
+ u32 height, u32 fColor, u32 bColor, u32 rop2)
{
unsigned int ulBytesPerScan;
unsigned int ul4BytesPerScan;
Thanks.
