From: Marek Belisko <marek.belisko@xxxxxxxxxxxxxxx>
Signed-off-by: Marek Belisko <marek.belisko@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/staging/ft1000/ft1000-usb/ft1000_hw.c | 37 +++++++++++++------------
1 files changed, 19 insertions(+), 18 deletions(-)
diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
index 53073d5..188a8e3 100644
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
@@ -593,32 +593,33 @@ int dsp_reload(struct ft1000_device *ft1000dev)
// none
//
//---------------------------------------------------------------------------
-static void ft1000_reset_asic (struct net_device *dev)
+static void ft1000_reset_asic(struct net_device *dev)
{
struct ft1000_info *info = netdev_priv(dev);
- struct ft1000_device *ft1000dev = info->pFt1000Dev;
- u16 tempword;
-
- DEBUG("ft1000_hw:ft1000_reset_asic called\n");
+ struct ft1000_device *ft1000dev = info->pFt1000Dev;
+ u16 tempword;
- info->ASICResetNum++;
+ DEBUG("ft1000_hw:ft1000_reset_asic called\n");
- // Let's use the register provided by the Magnemite ASIC to reset the
- // ASIC and DSP.
- ft1000_write_register(ft1000dev, (DSP_RESET_BIT | ASIC_RESET_BIT), FT1000_REG_RESET );
+ info->ASICResetNum++;
- mdelay(1);
+ /* Let's use the register provided by the Magnemite ASIC to reset the
+ * ASIC and DSP.
+ */
+ ft1000_write_register(ft1000dev, (DSP_RESET_BIT | ASIC_RESET_BIT),
+ FT1000_REG_RESET);
- // set watermark to -1 in order to not generate an interrrupt
- ft1000_write_register(ft1000dev, 0xffff, FT1000_REG_MAG_WATERMARK);
+ mdelay(1);
- // clear interrupts
- ft1000_read_register (ft1000dev, &tempword, FT1000_REG_SUP_ISR);
- DEBUG("ft1000_hw: interrupt status register = 0x%x\n",tempword);
- ft1000_write_register (ft1000dev, tempword, FT1000_REG_SUP_ISR);
- ft1000_read_register (ft1000dev, &tempword, FT1000_REG_SUP_ISR);
- DEBUG("ft1000_hw: interrupt status register = 0x%x\n",tempword);
+ /* set watermark to -1 in order to not generate an interrrupt */
+ ft1000_write_register(ft1000dev, 0xffff, FT1000_REG_MAG_WATERMARK);
+ /* clear interrupts */
+ ft1000_read_register(ft1000dev, &tempword, FT1000_REG_SUP_ISR);
+ DEBUG("ft1000_hw: interrupt status register = 0x%x\n", tempword);
+ ft1000_write_register(ft1000dev, tempword, FT1000_REG_SUP_ISR);
+ ft1000_read_register(ft1000dev, &tempword, FT1000_REG_SUP_ISR);
+ DEBUG("ft1000_hw: interrupt status register = 0x%x\n", tempword);
}
--
1.7.4.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
