Depending on revision of the chip, reset lines are inverted. Make code more readable making use of 'soc_device_match' in driver probe function. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx> --- drivers/staging/mt7621-pci/pci-mt7621.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c b/drivers/staging/mt7621-pci/pci-mt7621.c index 6b98827da57f..3633c924848e 100644 --- a/drivers/staging/mt7621-pci/pci-mt7621.c +++ b/drivers/staging/mt7621-pci/pci-mt7621.c @@ -29,15 +29,14 @@ #include <linux/phy/phy.h> #include <linux/platform_device.h> #include <linux/reset.h> +#include <linux/sys_soc.h> #include <mt7621.h> #include <ralink_regs.h> #include "../../pci/pci.h" /* sysctl */ -#define MT7621_CHIP_REV_ID 0x0c #define MT7621_GPIO_MODE 0x60 -#define CHIP_REV_MT7621_E2 0x0101 /* MediaTek specific configuration registers */ #define PCIE_FTS_NUM 0x70c @@ -126,6 +125,8 @@ struct mt7621_pcie_port { * @ports: pointer to PCIe port information * @perst: gpio reset * @rst: pointer to pcie reset + * @resets_inverted: depends on chip revision + * reset lines are inverted. */ struct mt7621_pcie { void __iomem *base; @@ -140,6 +141,7 @@ struct mt7621_pcie { struct list_head ports; struct gpio_desc *perst; struct reset_control *rst; + bool resets_inverted; }; static inline u32 pcie_read(struct mt7621_pcie *pcie, u32 reg) @@ -229,9 +231,9 @@ static inline void mt7621_pcie_port_clk_disable(struct mt7621_pcie_port *port) static inline void mt7621_control_assert(struct mt7621_pcie_port *port) { - u32 chip_rev_id = rt_sysc_r32(MT7621_CHIP_REV_ID); + struct mt7621_pcie *pcie = port->pcie; - if ((chip_rev_id & 0xFFFF) == CHIP_REV_MT7621_E2) + if (pcie->resets_inverted) reset_control_assert(port->pcie_rst); else reset_control_deassert(port->pcie_rst); @@ -239,9 +241,9 @@ static inline void mt7621_control_assert(struct mt7621_pcie_port *port) static inline void mt7621_control_deassert(struct mt7621_pcie_port *port) { - u32 chip_rev_id = rt_sysc_r32(MT7621_CHIP_REV_ID); + struct mt7621_pcie *pcie = port->pcie; - if ((chip_rev_id & 0xFFFF) == CHIP_REV_MT7621_E2) + if (pcie->resets_inverted) reset_control_deassert(port->pcie_rst); else reset_control_assert(port->pcie_rst); @@ -641,9 +643,14 @@ static int mt7621_pcie_register_host(struct pci_host_bridge *host, return pci_host_probe(host); } +static const struct soc_device_attribute mt7621_pci_quirks_match[] = { + { .soc_id = "mt7621", .revision = "E2" } +}; + static int mt7621_pci_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; + const struct soc_device_attribute *attr; struct mt7621_pcie *pcie; struct pci_host_bridge *bridge; int err; @@ -661,6 +668,10 @@ static int mt7621_pci_probe(struct platform_device *pdev) platform_set_drvdata(pdev, pcie); INIT_LIST_HEAD(&pcie->ports); + attr = soc_device_match(mt7621_pci_quirks_match); + if (attr) + pcie->resets_inverted = true; + err = mt7621_pcie_parse_dt(pcie); if (err) { dev_err(dev, "Parsing DT failed\n"); -- 2.19.1 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel