hyperv-tlfs.h defines Hyper-V interfaces from the Hyper-V Top Level Functional Spec (TLFS). The TLFS is distinctly oriented to x86/x64, and Hyper-V has not separated out the architecture-dependent parts into x86/x64 vs. ARM64. So hyperv-tlfs.h includes information for ARM64 that is not yet formally published. The TLFS is available here: docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/reference/tlfs mshyperv.h defines Linux-specific structures and routines for interacting with Hyper-V on ARM64, and #includes the architecture- independent part of mshyperv.h in include/asm-generic. Signed-off-by: Michael Kelley <mikelley@xxxxxxxxxxxxx> --- MAINTAINERS | 2 + arch/arm64/include/asm/hyperv-tlfs.h | 408 +++++++++++++++++++++++++++++++++++ arch/arm64/include/asm/mshyperv.h | 105 +++++++++ 3 files changed, 515 insertions(+) create mode 100644 arch/arm64/include/asm/hyperv-tlfs.h create mode 100644 arch/arm64/include/asm/mshyperv.h diff --git a/MAINTAINERS b/MAINTAINERS index f04f081..d464067 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7564,6 +7564,8 @@ F: arch/x86/include/asm/trace/hyperv.h F: arch/x86/include/asm/hyperv-tlfs.h F: arch/x86/kernel/cpu/mshyperv.c F: arch/x86/hyperv +F: arch/arm64/include/asm/hyperv-tlfs.h +F: arch/arm64/include/asm/mshyperv.h F: drivers/clocksource/hyperv_timer.c F: drivers/hid/hid-hyperv.c F: drivers/hv/ diff --git a/arch/arm64/include/asm/hyperv-tlfs.h b/arch/arm64/include/asm/hyperv-tlfs.h new file mode 100644 index 0000000..fe167c4 --- /dev/null +++ b/arch/arm64/include/asm/hyperv-tlfs.h @@ -0,0 +1,408 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* + * This file contains definitions from the Hyper-V Hypervisor Top-Level + * Functional Specification (TLFS): + * https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/reference/tlfs + * + * Copyright (C) 2019, Microsoft, Inc. + * + * Author : Michael Kelley <mikelley@xxxxxxxxxxxxx> + */ + +#ifndef _ASM_HYPERV_TLFS_H +#define _ASM_HYPERV_TLFS_H + +#include <linux/types.h> + +/* + * All data structures defined in the TLFS that are shared between Hyper-V + * and a guest VM use Little Endian byte ordering. This matches the default + * byte ordering of Linux running on ARM64, so no special handling is required. + */ + + +/* + * While not explicitly listed in the TLFS, Hyper-V always runs with a page + * size of 4096. These definitions are used when communicating with Hyper-V + * using guest physical pages and guest physical page addresses, since the + * guest page size may not be 4096 on ARM64. + */ +#define HV_HYP_PAGE_SHIFT 12 +#define HV_HYP_PAGE_SIZE (1 << HV_HYP_PAGE_SHIFT) +#define HV_HYP_PAGE_MASK (~(HV_HYP_PAGE_SIZE - 1)) + +/* + * These Hyper-V registers provide information equivalent to the CPUID + * instruction on x86/x64. + */ +#define HV_REGISTER_HYPERVISOR_VERSION 0x00000100 /*CPUID 0x40000002 */ +#define HV_REGISTER_PRIVILEGES_AND_FEATURES 0x00000200 /*CPUID 0x40000003 */ +#define HV_REGISTER_FEATURES 0x00000201 /*CPUID 0x40000004 */ +#define HV_REGISTER_IMPLEMENTATION_LIMITS 0x00000202 /*CPUID 0x40000005 */ +#define HV_ARM64_REGISTER_INTERFACE_VERSION 0x00090006 /*CPUID 0x40000001 */ + +/* + * Feature identification. HvRegisterPrivilegesAndFeaturesInfo returns a + * 128-bit value with flags indicating which features are available to the + * partition based upon the current partition privileges. The 128-bit + * value is broken up with different portions stored in different 32-bit + * fields in the ms_hyperv structure. + */ + +/* Partition Reference Counter available*/ +#define HV_MSR_TIME_REF_COUNT_AVAILABLE BIT(1) + +/* + * Synthetic Timers available + */ +#define HV_MSR_SYNTIMER_AVAILABLE BIT(3) + +/* Frequency MSRs available */ +#define HV_FEATURE_FREQUENCY_MSRS_AVAILABLE BIT(8) + +/* Reference TSC available */ +#define HV_MSR_REFERENCE_TSC_AVAILABLE BIT(9) + +/* Crash MSR available */ +#define HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE BIT(10) + + +/* + * This group of flags is in the high order 64-bits of the returned + * 128-bit value. + */ + +/* STIMER direct mode is available */ +#define HV_STIMER_DIRECT_MODE_AVAILABLE BIT(19) + +/* + * Implementation recommendations in register + * HvRegisterFeaturesInfo. Indicates which behaviors the hypervisor + * recommends the OS implement for optimal performance. + */ + +/* + * Recommend not using Auto EOI + */ +#define HV_DEPRECATING_AEOI_RECOMMENDED BIT(9) + +/* + * Synthetic register definitions equivalent to MSRs on x86/x64 + */ +#define HV_REGISTER_CRASH_P0 0x00000210 +#define HV_REGISTER_CRASH_P1 0x00000211 +#define HV_REGISTER_CRASH_P2 0x00000212 +#define HV_REGISTER_CRASH_P3 0x00000213 +#define HV_REGISTER_CRASH_P4 0x00000214 +#define HV_REGISTER_CRASH_CTL 0x00000215 + +#define HV_REGISTER_GUEST_OSID 0x00090002 +#define HV_REGISTER_VPINDEX 0x00090003 +#define HV_REGISTER_TIME_REFCOUNT 0x00090004 +#define HV_REGISTER_REFERENCE_TSC 0x00090017 + +#define HV_REGISTER_SINT0 0x000A0000 +#define HV_REGISTER_SINT1 0x000A0001 +#define HV_REGISTER_SINT2 0x000A0002 +#define HV_REGISTER_SINT3 0x000A0003 +#define HV_REGISTER_SINT4 0x000A0004 +#define HV_REGISTER_SINT5 0x000A0005 +#define HV_REGISTER_SINT6 0x000A0006 +#define HV_REGISTER_SINT7 0x000A0007 +#define HV_REGISTER_SINT8 0x000A0008 +#define HV_REGISTER_SINT9 0x000A0009 +#define HV_REGISTER_SINT10 0x000A000A +#define HV_REGISTER_SINT11 0x000A000B +#define HV_REGISTER_SINT12 0x000A000C +#define HV_REGISTER_SINT13 0x000A000D +#define HV_REGISTER_SINT14 0x000A000E +#define HV_REGISTER_SINT15 0x000A000F +#define HV_REGISTER_SCONTROL 0x000A0010 +#define HV_REGISTER_SVERSION 0x000A0011 +#define HV_REGISTER_SIFP 0x000A0012 +#define HV_REGISTER_SIPP 0x000A0013 +#define HV_REGISTER_EOM 0x000A0014 +#define HV_REGISTER_SIRBP 0x000A0015 + +#define HV_REGISTER_STIMER0_CONFIG 0x000B0000 +#define HV_REGISTER_STIMER0_COUNT 0x000B0001 +#define HV_REGISTER_STIMER1_CONFIG 0x000B0002 +#define HV_REGISTER_STIMER1_COUNT 0x000B0003 +#define HV_REGISTER_STIMER2_CONFIG 0x000B0004 +#define HV_REGISTER_STIMER2_COUNT 0x000B0005 +#define HV_REGISTER_STIMER3_CONFIG 0x000B0006 +#define HV_REGISTER_STIMER3_COUNT 0x000B0007 + +/* + * Crash notification flags. + */ +#define HV_CRASH_CTL_CRASH_NOTIFY_MSG BIT_ULL(62) +#define HV_CRASH_CTL_CRASH_NOTIFY BIT_ULL(63) + +/* + * The guest OS needs to register the guest ID with the hypervisor. + * The guest ID is a 64 bit entity and the structure of this ID is + * specified in the Hyper-V TLFS. + */ +#define HV_LINUX_VENDOR_ID 0x8100 + +/* Declare the various hypercall operations. */ +#define HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE 0x0002 +#define HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST 0x0003 +#define HVCALL_NOTIFY_LONG_SPIN_WAIT 0x0008 +#define HVCALL_SEND_IPI 0x000b +#define HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE_EX 0x0013 +#define HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST_EX 0x0014 +#define HVCALL_SEND_IPI_EX 0x0015 +#define HVCALL_GET_VP_REGISTERS 0x0050 +#define HVCALL_SET_VP_REGISTERS 0x0051 +#define HVCALL_POST_MESSAGE 0x005c +#define HVCALL_SIGNAL_EVENT 0x005d +#define HVCALL_RETARGET_INTERRUPT 0x007e +#define HVCALL_START_VIRTUAL_PROCESSOR 0x0099 + +/* Declare standard hypercall field values. */ +#define HV_PARTITION_ID_SELF ((u64)-1) +#define HV_VP_INDEX_SELF ((u32)-2) + +#define HV_HYPERCALL_FAST_BIT BIT(16) +#define HV_HYPERCALL_REP_COUNT_1 BIT_ULL(32) +#define HV_HYPERCALL_RESULT_MASK GENMASK_ULL(15, 0) + +/* Define the hypercall status result */ + +union hv_hypercall_status { + u64 as_uint64; + struct { + u16 status; + u16 reserved; + u16 reps_completed; /* Low 12 bits */ + u16 reserved2; + }; +}; + +/* hypercall status code */ +#define HV_STATUS_SUCCESS 0 +#define HV_STATUS_INVALID_HYPERCALL_CODE 2 +#define HV_STATUS_INVALID_HYPERCALL_INPUT 3 +#define HV_STATUS_INVALID_ALIGNMENT 4 +#define HV_STATUS_INSUFFICIENT_MEMORY 11 +#define HV_STATUS_INVALID_CONNECTION_ID 18 +#define HV_STATUS_INSUFFICIENT_BUFFERS 19 + +/* Define output layout for Get VP Register hypercall */ +struct hv_get_vp_register_output { + u64 registervaluelow; + u64 registervaluehigh; +}; + +#define HV_FLUSH_ALL_PROCESSORS BIT(0) +#define HV_FLUSH_ALL_VIRTUAL_ADDRESS_SPACES BIT(1) +#define HV_FLUSH_NON_GLOBAL_MAPPINGS_ONLY BIT(2) +#define HV_FLUSH_USE_EXTENDED_RANGE_FORMAT BIT(3) + +enum HV_GENERIC_SET_FORMAT { + HV_GENERIC_SET_SPARSE_4K, + HV_GENERIC_SET_ALL, +}; + +/* + * The Hyper-V TimeRefCount register and the TSC + * page provide a guest VM clock with 100ns tick rate + */ +#define HV_CLOCK_HZ (NSEC_PER_SEC/100) + +/* + * The fields in this structure are set by Hyper-V and read + * by the Linux guest. They should be accessed with READ_ONCE() + * so the compiler doesn't optimize in a way that will cause + * problems. The union pads the size out to the page size + * used in communication with Hyper-V. + */ +struct ms_hyperv_tsc_page { + union { + struct { + u32 tsc_sequence; + u32 reserved1; + u64 tsc_scale; + s64 tsc_offset; + } __packed; + u8 reserved2[HV_HYP_PAGE_SIZE]; + }; +}; + +/* Define the number of synthetic interrupt sources. */ +#define HV_SYNIC_SINT_COUNT (16) +/* Define the expected SynIC version. */ +#define HV_SYNIC_VERSION_1 (0x1) + +#define HV_SYNIC_CONTROL_ENABLE (1ULL << 0) +#define HV_SYNIC_SIMP_ENABLE (1ULL << 0) +#define HV_SYNIC_SIEFP_ENABLE (1ULL << 0) +#define HV_SYNIC_SINT_MASKED (1ULL << 16) +#define HV_SYNIC_SINT_AUTO_EOI (1ULL << 17) +#define HV_SYNIC_SINT_VECTOR_MASK (0xFF) + +#define HV_SYNIC_STIMER_COUNT (4) + +/* Define synthetic interrupt controller message constants. */ +#define HV_MESSAGE_SIZE (256) +#define HV_MESSAGE_PAYLOAD_BYTE_COUNT (240) +#define HV_MESSAGE_PAYLOAD_QWORD_COUNT (30) + +/* Define hypervisor message types. */ +enum hv_message_type { + HVMSG_NONE = 0x00000000, + + /* Memory access messages. */ + HVMSG_UNMAPPED_GPA = 0x80000000, + HVMSG_GPA_INTERCEPT = 0x80000001, + + /* Timer notification messages. */ + HVMSG_TIMER_EXPIRED = 0x80000010, + + /* Error messages. */ + HVMSG_INVALID_VP_REGISTER_VALUE = 0x80000020, + HVMSG_UNRECOVERABLE_EXCEPTION = 0x80000021, + HVMSG_UNSUPPORTED_FEATURE = 0x80000022, + + /* Trace buffer complete messages. */ + HVMSG_EVENTLOG_BUFFERCOMPLETE = 0x80000040, +}; + +/* Define synthetic interrupt controller message flags. */ +union hv_message_flags { + __u8 asu8; + struct { + __u8 msg_pending:1; + __u8 reserved:7; + } __packed; +}; + +/* Define port identifier type. */ +union hv_port_id { + __u32 asu32; + struct { + __u32 id:24; + __u32 reserved:8; + } __packed u; +}; + +/* Define synthetic interrupt controller message header. */ +struct hv_message_header { + __u32 message_type; + __u8 payload_size; + union hv_message_flags message_flags; + __u8 reserved[2]; + union { + __u64 sender; + union hv_port_id port; + }; +} __packed; + +/* Define synthetic interrupt controller message format. */ +struct hv_message { + struct hv_message_header header; + union { + __u64 payload[HV_MESSAGE_PAYLOAD_QWORD_COUNT]; + } u; +} __packed; + +/* Define the synthetic interrupt message page layout. */ +struct hv_message_page { + struct hv_message sint_message[HV_SYNIC_SINT_COUNT]; +} __packed; + +/* Define timer message payload structure. */ +struct hv_timer_message_payload { + __u32 timer_index; + __u32 reserved; + __u64 expiration_time; /* When the timer expired */ + __u64 delivery_time; /* When the message was delivered */ +} __packed; + +#define HV_STIMER_ENABLE (1ULL << 0) +#define HV_STIMER_PERIODIC (1ULL << 1) +#define HV_STIMER_LAZY (1ULL << 2) +#define HV_STIMER_AUTOENABLE (1ULL << 3) +#define HV_STIMER_SINT(config) (__u8)(((config) >> 16) & 0x0F) + + +/* Define synthetic interrupt controller flag constants. */ +#define HV_EVENT_FLAGS_COUNT (256 * 8) +#define HV_EVENT_FLAGS_LONG_COUNT (256 / sizeof(unsigned long)) + +/* + * Timer configuration register. + */ +union hv_stimer_config { + u64 as_uint64; + struct { + u64 enable:1; + u64 periodic:1; + u64 lazy:1; + u64 auto_enable:1; + u64 apic_vector:8; + u64 direct_mode:1; + u64 reserved_z0:3; + u64 sintx:4; + u64 reserved_z1:44; + } __packed; +}; + + +/* Define the synthetic interrupt controller event flags format. */ +union hv_synic_event_flags { + unsigned long flags[HV_EVENT_FLAGS_LONG_COUNT]; +}; + +/* Define SynIC control register. */ +union hv_synic_scontrol { + u64 as_uint64; + struct { + u64 enable:1; + u64 reserved:63; + } __packed; +}; + +/* Define synthetic interrupt source. */ +union hv_synic_sint { + u64 as_uint64; + struct { + u64 vector:8; + u64 reserved1:8; + u64 masked:1; + u64 auto_eoi:1; + u64 reserved2:46; + } __packed; +}; + +/* Define the format of the SIMP register */ +union hv_synic_simp { + u64 as_uint64; + struct { + u64 simp_enabled:1; + u64 preserved:11; + u64 base_simp_gpa:52; + } __packed; +}; + +/* Define the format of the SIEFP register */ +union hv_synic_siefp { + u64 as_uint64; + struct { + u64 siefp_enabled:1; + u64 preserved:11; + u64 base_siefp_gpa:52; + } __packed; +}; + +struct hv_vpset { + u64 format; + u64 valid_bank_mask; + u64 bank_contents[]; +} __packed; + + +#endif diff --git a/arch/arm64/include/asm/mshyperv.h b/arch/arm64/include/asm/mshyperv.h new file mode 100644 index 0000000..a8468a6 --- /dev/null +++ b/arch/arm64/include/asm/mshyperv.h @@ -0,0 +1,105 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* + * Linux-specific definitions for managing interactions with Microsoft's + * Hyper-V hypervisor. The definitions in this file are specific to + * the ARM64 architecture. See include/asm-generic/mshyperv.h for + * definitions are that architecture independent. + * + * Definitions that are specified in the Hyper-V Top Level Functional + * Spec (TLFS) should not go in this file, but should instead go in + * hyperv-tlfs.h. + * + * Copyright (C) 2019, Microsoft, Inc. + * + * Author : Michael Kelley <mikelley@xxxxxxxxxxxxx> + */ + +#ifndef _ASM_MSHYPERV_H +#define _ASM_MSHYPERV_H + +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/clocksource.h> +#include <linux/irq.h> +#include <linux/irqdesc.h> +#include <asm/hyperv-tlfs.h> + +/* + * Define the IRQ numbers/vectors used by Hyper-V VMbus interrupts + * and by STIMER0 Direct Mode interrupts. Hyper-V should be supplying + * these values through ACPI, but there are no other interrupting + * devices in a Hyper-V VM on ARM64, so it's OK to hard code for now. + * The "CALLBACK_VECTOR" terminology is a left-over from the x86/x64 + * world that is used in architecture independent Hyper-V code. + */ +#define HYPERVISOR_CALLBACK_VECTOR 16 +#define HV_STIMER0_IRQNR 17 + +extern u64 hv_do_hvc(u64 control, ...); +extern u64 hv_do_hvc_fast_get(u64 control, u64 input1, u64 input2, u64 input3, + struct hv_get_vp_register_output *output); + +/* + * Declare calls to get and set Hyper-V VP register values on ARM64, which + * requires a hypercall. + */ +extern void hv_set_vpreg(u32 reg, u64 value); +extern u64 hv_get_vpreg(u32 reg); +extern void hv_get_vpreg_128(u32 reg, struct hv_get_vp_register_output *result); + +/* + * Use the Hyper-V provided stimer0 as the timer that is made + * available to the architecture independent Hyper-V drivers. + */ +#define hv_init_timer(timer, tick) \ + hv_set_vpreg(HV_REGISTER_STIMER0_COUNT + (2*timer), tick) +#define hv_init_timer_config(timer, val) \ + hv_set_vpreg(HV_REGISTER_STIMER0_CONFIG + (2*timer), val) +#define hv_get_current_tick(tick) \ + (tick = hv_get_vpreg(HV_REGISTER_TIME_REFCOUNT)) + +#define hv_get_simp(val) (val = hv_get_vpreg(HV_REGISTER_SIPP)) +#define hv_set_simp(val) hv_set_vpreg(HV_REGISTER_SIPP, val) + +#define hv_get_siefp(val) (val = hv_get_vpreg(HV_REGISTER_SIFP)) +#define hv_set_siefp(val) hv_set_vpreg(HV_REGISTER_SIFP, val) + +#define hv_get_synic_state(val) (val = hv_get_vpreg(HV_REGISTER_SCONTROL)) +#define hv_set_synic_state(val) hv_set_vpreg(HV_REGISTER_SCONTROL, val) + +#define hv_get_vp_index(index) (index = hv_get_vpreg(HV_REGISTER_VPINDEX)) + +#define hv_signal_eom() hv_set_vpreg(HV_REGISTER_EOM, 0) + +/* + * Hyper-V SINT registers are numbered sequentially, so we can just + * add the SINT number to the register number of SINT0 + */ +#define hv_get_synint_state(sint_num, val) \ + (val = hv_get_vpreg(HV_REGISTER_SINT0 + sint_num)) +#define hv_set_synint_state(sint_num, val) \ + hv_set_vpreg(HV_REGISTER_SINT0 + sint_num, val) + +#define hv_get_crash_ctl(val) \ + (val = hv_get_vpreg(HV_REGISTER_CRASH_CTL)) +#define hv_get_time_ref_count(val) \ + (val = hv_get_vpreg(HV_REGISTER_TIME_REFCOUNT)) +#define hv_get_reference_tsc(val) \ + (val = hv_get_vpreg(HV_REGISTER_REFERENCE_TSC)) +#define hv_set_reference_tsc(val) \ + hv_set_vpreg(HV_REGISTER_REFERENCE_TSC, val) +#define hv_set_clocksource_vdso(val) \ + ((val).archdata.vdso_direct = false) + +#if IS_ENABLED(CONFIG_HYPERV) +#define hv_enable_stimer0_percpu_irq(irq) enable_percpu_irq(irq, 0) +#define hv_disable_stimer0_percpu_irq(irq) disable_percpu_irq(irq) +#endif + +/* ARM64 specific code to read the hardware clock */ +#define hv_get_raw_timer() arch_timer_read_counter() + +#include <asm-generic/mshyperv.h> + +#endif -- 1.8.3.1 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
