From: Jérôme Pouiller <jerome.pouiller@xxxxxxxxxx>
Introduce bus level communication layer. At this level, 7 registers can
be addressed.
Notice that SPI driver is able to manage chip reset. SDIO mode relies
on an external driver (`mmc-pwrseq`) to reset chip.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@xxxxxxxxxx>
---
drivers/staging/wfx/bus.h | 17 +++
drivers/staging/wfx/bus_sdio.c | 189 ++++++++++++++++++++++-
drivers/staging/wfx/bus_spi.c | 271 ++++++++++++++++++++++++++++++++-
drivers/staging/wfx/hwio.h | 48 ++++++
drivers/staging/wfx/main.c | 53 +++++++
drivers/staging/wfx/main.h | 32 ++++
drivers/staging/wfx/wfx.h | 24 +++
7 files changed, 632 insertions(+), 2 deletions(-)
create mode 100644 drivers/staging/wfx/hwio.h
create mode 100644 drivers/staging/wfx/main.h
create mode 100644 drivers/staging/wfx/wfx.h
diff --git a/drivers/staging/wfx/bus.h b/drivers/staging/wfx/bus.h
index 8ce871a8a9ff..eb77abc09ec2 100644
--- a/drivers/staging/wfx/bus.h
+++ b/drivers/staging/wfx/bus.h
@@ -11,6 +11,23 @@
#include <linux/mmc/sdio_func.h>
#include <linux/spi/spi.h>
+#define WFX_REG_CONFIG 0x0
+#define WFX_REG_CONTROL 0x1
+#define WFX_REG_IN_OUT_QUEUE 0x2
+#define WFX_REG_AHB_DPORT 0x3
+#define WFX_REG_BASE_ADDR 0x4
+#define WFX_REG_SRAM_DPORT 0x5
+#define WFX_REG_SET_GEN_R_W 0x6
+#define WFX_REG_FRAME_OUT 0x7
+
+struct hwbus_ops {
+ int (*copy_from_io)(void *bus_priv, unsigned int addr, void *dst, size_t count);
+ int (*copy_to_io)(void *bus_priv, unsigned int addr, const void *src, size_t count);
+ void (*lock)(void *bus_priv);
+ void (*unlock)(void *bus_priv);
+ size_t (*align_size)(void *bus_priv, size_t size);
+};
+
extern struct sdio_driver wfx_sdio_driver;
extern struct spi_driver wfx_spi_driver;
diff --git a/drivers/staging/wfx/bus_sdio.c b/drivers/staging/wfx/bus_sdio.c
index 4b26c994f43c..35bcca7ec5dc 100644
--- a/drivers/staging/wfx/bus_sdio.c
+++ b/drivers/staging/wfx/bus_sdio.c
@@ -8,36 +8,223 @@
#include <linux/module.h>
#include <linux/mmc/sdio_func.h>
#include <linux/mmc/card.h>
+#include <linux/interrupt.h>
#include <linux/of_irq.h>
#include "bus.h"
+#include "wfx.h"
+#include "hwio.h"
+#include "main.h"
+
+static const struct wfx_platform_data wfx_sdio_pdata = {
+};
+
+struct wfx_sdio_priv {
+ struct sdio_func *func;
+ struct wfx_dev *core;
+ u8 buf_id_tx;
+ u8 buf_id_rx;
+ int of_irq;
+};
+
+static int wfx_sdio_copy_from_io(void *priv, unsigned int reg_id,
+ void *dst, size_t count)
+{
+ struct wfx_sdio_priv *bus = priv;
+ unsigned int sdio_addr = reg_id << 2;
+ int ret;
+
+ BUG_ON(reg_id > 7);
+ WARN(((uintptr_t) dst) & 3, "unaligned buffer size");
+ WARN(count & 3, "unaligned buffer address");
+
+ /* Use queue mode buffers */
+ if (reg_id == WFX_REG_IN_OUT_QUEUE)
+ sdio_addr |= (bus->buf_id_rx + 1) << 7;
+ ret = sdio_memcpy_fromio(bus->func, dst, sdio_addr, count);
+ if (!ret && reg_id == WFX_REG_IN_OUT_QUEUE)
+ bus->buf_id_rx = (bus->buf_id_rx + 1) % 4;
+
+ return ret;
+}
+
+static int wfx_sdio_copy_to_io(void *priv, unsigned int reg_id,
+ const void *src, size_t count)
+{
+ struct wfx_sdio_priv *bus = priv;
+ unsigned int sdio_addr = reg_id << 2;
+ int ret;
+
+ BUG_ON(reg_id > 7);
+ WARN(((uintptr_t) src) & 3, "unaligned buffer size");
+ WARN(count & 3, "unaligned buffer address");
+
+ /* Use queue mode buffers */
+ if (reg_id == WFX_REG_IN_OUT_QUEUE)
+ sdio_addr |= bus->buf_id_tx << 7;
+ // FIXME: discards 'const' qualifier for src
+ ret = sdio_memcpy_toio(bus->func, sdio_addr, (void *) src, count);
+ if (!ret && reg_id == WFX_REG_IN_OUT_QUEUE)
+ bus->buf_id_tx = (bus->buf_id_tx + 1) % 32;
+
+ return ret;
+}
+
+static void wfx_sdio_lock(void *priv)
+{
+ struct wfx_sdio_priv *bus = priv;
+
+ sdio_claim_host(bus->func);
+}
+
+static void wfx_sdio_unlock(void *priv)
+{
+ struct wfx_sdio_priv *bus = priv;
+
+ sdio_release_host(bus->func);
+}
+
+static void wfx_sdio_irq_handler(struct sdio_func *func)
+{
+ struct wfx_sdio_priv *bus = sdio_get_drvdata(func);
+
+ if (bus->core)
+ /* empty */;
+ else
+ WARN(!bus->core, "race condition in driver init/deinit");
+}
+
+static irqreturn_t wfx_sdio_irq_handler_ext(int irq, void *priv)
+{
+ struct wfx_sdio_priv *bus = priv;
+
+ if (!bus->core) {
+ WARN(!bus->core, "race condition in driver init/deinit");
+ return IRQ_NONE;
+ }
+ sdio_claim_host(bus->func);
+ sdio_release_host(bus->func);
+ return IRQ_HANDLED;
+}
+
+static int wfx_sdio_irq_subscribe(struct wfx_sdio_priv *bus)
+{
+ int ret;
+
+ if (bus->of_irq) {
+ ret = request_irq(bus->of_irq, wfx_sdio_irq_handler_ext,
+ IRQF_TRIGGER_RISING, "wfx", bus);
+ } else {
+ sdio_claim_host(bus->func);
+ ret = sdio_claim_irq(bus->func, wfx_sdio_irq_handler);
+ sdio_release_host(bus->func);
+ }
+ return ret;
+}
+
+static int wfx_sdio_irq_unsubscribe(struct wfx_sdio_priv *bus)
+{
+ int ret;
+
+ if (bus->of_irq) {
+ free_irq(bus->of_irq, bus);
+ ret = 0;
+ } else {
+ sdio_claim_host(bus->func);
+ ret = sdio_release_irq(bus->func);
+ sdio_release_host(bus->func);
+ }
+ return ret;
+}
+
+static size_t wfx_sdio_align_size(void *priv, size_t size)
+{
+ struct wfx_sdio_priv *bus = priv;
+
+ return sdio_align_size(bus->func, size);
+}
+
+static const struct hwbus_ops wfx_sdio_hwbus_ops = {
+ .copy_from_io = wfx_sdio_copy_from_io,
+ .copy_to_io = wfx_sdio_copy_to_io,
+ .lock = wfx_sdio_lock,
+ .unlock = wfx_sdio_unlock,
+ .align_size = wfx_sdio_align_size,
+};
static const struct of_device_id wfx_sdio_of_match[];
static int wfx_sdio_probe(struct sdio_func *func,
const struct sdio_device_id *id)
{
struct device_node *np = func->dev.of_node;
+ struct wfx_sdio_priv *bus;
+ int ret;
if (func->num != 1) {
dev_err(&func->dev, "SDIO function number is %d while it should always be 1 (unsupported chip?)\n", func->num);
return -ENODEV;
}
+ bus = devm_kzalloc(&func->dev, sizeof(*bus), GFP_KERNEL);
+ if (!bus)
+ return -ENOMEM;
+
if (np) {
if (!of_match_node(wfx_sdio_of_match, np)) {
dev_warn(&func->dev, "no compatible device found in DT\n");
return -ENODEV;
}
+ bus->of_irq = irq_of_parse_and_map(np, 0);
} else {
dev_warn(&func->dev, "device is not declared in DT, features will be limited\n");
// FIXME: ignore VID/PID and only rely on device tree
// return -ENODEV;
}
- return -EIO; // FIXME: not yet supported
+
+ bus->func = func;
+ sdio_set_drvdata(func, bus);
+ func->card->quirks |= MMC_QUIRK_LENIENT_FN0 | MMC_QUIRK_BLKSZ_FOR_BYTE_MODE | MMC_QUIRK_BROKEN_BYTE_MODE_512;
+
+ sdio_claim_host(func);
+ ret = sdio_enable_func(func);
+ // Block of 64 bytes is more efficient than 512B for frame sizes < 4k
+ sdio_set_block_size(func, 64);
+ sdio_release_host(func);
+ if (ret)
+ goto err0;
+
+ ret = wfx_sdio_irq_subscribe(bus);
+ if (ret)
+ goto err1;
+
+ bus->core = wfx_init_common(&func->dev, &wfx_sdio_pdata,
+ &wfx_sdio_hwbus_ops, bus);
+ if (!bus->core) {
+ ret = -EIO;
+ goto err2;
+ }
+
+ return 0;
+
+err2:
+ wfx_sdio_irq_unsubscribe(bus);
+err1:
+ sdio_claim_host(func);
+ sdio_disable_func(func);
+ sdio_release_host(func);
+err0:
+ return ret;
}
static void wfx_sdio_remove(struct sdio_func *func)
{
+ struct wfx_sdio_priv *bus = sdio_get_drvdata(func);
+
+ wfx_free_common(bus->core);
+ wfx_sdio_irq_unsubscribe(bus);
+ sdio_claim_host(func);
+ sdio_disable_func(func);
+ sdio_release_host(func);
}
#define SDIO_VENDOR_ID_SILABS 0x0000
diff --git a/drivers/staging/wfx/bus_spi.c b/drivers/staging/wfx/bus_spi.c
index 574b60f513e9..b311ff72cf80 100644
--- a/drivers/staging/wfx/bus_spi.c
+++ b/drivers/staging/wfx/bus_spi.c
@@ -7,19 +7,288 @@
* Copyright (c) 2010, ST-Ericsson
*/
#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/version.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/spi/spi.h>
+#include <linux/interrupt.h>
#include <linux/of.h>
#include "bus.h"
+#include "wfx.h"
+#include "hwio.h"
+#include "main.h"
+
+#define DETECT_INVALID_CTRL_ACCESS
+
+static int gpio_reset = -2;
+module_param(gpio_reset, int, 0644);
+MODULE_PARM_DESC(gpio_reset, "gpio number for reset. -1 for none.");
+
+#define SET_WRITE 0x7FFF /* usage: and operation */
+#define SET_READ 0x8000 /* usage: or operation */
+
+static const struct wfx_platform_data wfx_spi_pdata = {
+};
+
+struct wfx_spi_priv {
+ struct spi_device *func;
+ struct wfx_dev *core;
+ struct gpio_desc *gpio_reset;
+ struct work_struct request_rx;
+ bool need_swab;
+};
+
+/*
+ * Read of control register need a particular attention because it should be
+ * done only after an IRQ raise. We can detect if this event happens by reading
+ * control register twice (it is safe to read twice since we can garantee that
+ * no data acess was done since IRQ raising). In add, this function optimize it
+ * by doing only one SPI request.
+ */
+#if (KERNEL_VERSION(4, 19, 14) > LINUX_VERSION_CODE)
+static int wfx_spi_read_ctrl_reg(struct wfx_spi_priv *bus, u16 *dst)
+{
+ int i, ret = 0;
+ u16 tx_buf[4] = { };
+ u16 rx_buf[4] = { };
+ u16 tmp[2] = { };
+ struct spi_message m;
+ struct spi_transfer t = {
+ .rx_buf = rx_buf,
+ .tx_buf = tx_buf,
+ .len = sizeof(tx_buf),
+ };
+ u16 regaddr = (WFX_REG_CONTROL << 12) | (sizeof(u16) / 2) | SET_READ;
+
+ cpu_to_le16s(regaddr);
+ if (bus->need_swab)
+ swab16s(®addr);
+
+ tx_buf[0] = tx_buf[2] = regaddr;
+ spi_message_init(&m);
+ spi_message_add_tail(&t, &m);
+ for (i = 0, tmp[0] = tmp[1] + 1; tmp[0] != tmp[1] && i < 3; i++) {
+ ret = spi_sync(bus->func, &m);
+ // Changes of gpio-wakeup can occur during control register
+ // access. In this case, CTRL_WLAN_READY may differs.
+ tmp[0] = rx_buf[1] & cpu_to_le16(~CTRL_WLAN_READY);
+ tmp[1] = rx_buf[3] & cpu_to_le16(~CTRL_WLAN_READY);
+ }
+ if (tmp[0] != tmp[1])
+ ret = -ETIMEDOUT;
+ else if (i > 1)
+ dev_info(bus->core->dev, "success read after %d failures\n", i - 1);
+
+ *dst = rx_buf[1];
+ return ret;
+}
+#endif
+
+/*
+ * WFx chip read data 16bits at time and place them directly into (little
+ * endian) CPU register. So, chip expect byte order like "B1 B0 B3 B2" (while
+ * LE is "B0 B1 B2 B3" and BE is "B3 B2 B1 B0")
+ *
+ * A little endian host with bits_per_word == 16 should do the right job
+ * natively. The code below to support big endian host and commonly used SPI
+ * 8bits.
+ */
+static int wfx_spi_copy_from_io(void *priv, unsigned int addr,
+ void *dst, size_t count)
+{
+ struct wfx_spi_priv *bus = priv;
+ u16 regaddr = (addr << 12) | (count / 2) | SET_READ;
+ struct spi_message m;
+ struct spi_transfer t_addr = {
+ .tx_buf = ®addr,
+ .len = sizeof(regaddr),
+ };
+ struct spi_transfer t_msg = {
+ .rx_buf = dst,
+ .len = count,
+ };
+ u16 *dst16 = dst;
+#if (KERNEL_VERSION(4, 19, 14) > LINUX_VERSION_CODE)
+ u8 *dst8 = dst;
+#endif
+ int ret, i;
+
+ WARN(count % 2, "buffer size must be a multiple of 2");
+
+#if (KERNEL_VERSION(4, 19, 14) > LINUX_VERSION_CODE)
+ /* Some SPI driver (and especially Raspberry one) have race conditions
+ * during SPI transfers. It impact last byte of transfer. Work around
+ * bellow try to detect and solve them.
+ * See https://github.com/raspberrypi/linux/issues/2200
+ */
+ if (addr == WFX_REG_IN_OUT_QUEUE)
+ dst8[count - 1] = 0xFF;
+#endif
+
+ cpu_to_le16s(®addr);
+ if (bus->need_swab)
+ swab16s(®addr);
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t_addr, &m);
+ spi_message_add_tail(&t_msg, &m);
+ ret = spi_sync(bus->func, &m);
+
+#if (KERNEL_VERSION(4, 19, 14) > LINUX_VERSION_CODE)
+ /* If last byte has not been overwritten, read ctrl_reg manually
+ */
+ if (addr == WFX_REG_IN_OUT_QUEUE && !ret && dst8[count - 1] == 0xFF) {
+ dev_warn(bus->core->dev, "SPI DMA error detected (and resolved)\n");
+ ret = wfx_spi_read_ctrl_reg(bus, (u16 *) (dst8 + count - 2));
+ }
+#endif
+
+ if (bus->need_swab && addr == WFX_REG_CONFIG)
+ for (i = 0; i < count / 2; i++)
+ swab16s(&dst16[i]);
+ return ret;
+}
+
+static int wfx_spi_copy_to_io(void *priv, unsigned int addr,
+ const void *src, size_t count)
+{
+ struct wfx_spi_priv *bus = priv;
+ u16 regaddr = (addr << 12) | (count / 2);
+ // FIXME: use a bounce buffer
+ u16 *src16 = (void *) src;
+ int ret, i;
+ struct spi_message m;
+ struct spi_transfer t_addr = {
+ .tx_buf = ®addr,
+ .len = sizeof(regaddr),
+ };
+ struct spi_transfer t_msg = {
+ .tx_buf = src,
+ .len = count,
+ };
+
+ WARN(count % 2, "buffer size must be a multiple of 2");
+ WARN(regaddr & SET_READ, "bad addr or size overflow");
+
+ cpu_to_le16s(®addr);
+
+ if (bus->need_swab)
+ swab16s(®addr);
+ if (bus->need_swab && addr == WFX_REG_CONFIG)
+ for (i = 0; i < count / 2; i++)
+ swab16s(&src16[i]);
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t_addr, &m);
+ spi_message_add_tail(&t_msg, &m);
+ ret = spi_sync(bus->func, &m);
+
+ if (bus->need_swab && addr == WFX_REG_CONFIG)
+ for (i = 0; i < count / 2; i++)
+ swab16s(&src16[i]);
+ return ret;
+}
+
+static void wfx_spi_lock(void *priv)
+{
+}
+
+static void wfx_spi_unlock(void *priv)
+{
+}
+
+static irqreturn_t wfx_spi_irq_handler(int irq, void *priv)
+{
+ struct wfx_spi_priv *bus = priv;
+
+ if (!bus->core) {
+ WARN(!bus->core, "race condition in driver init/deinit");
+ return IRQ_NONE;
+ }
+ queue_work(system_highpri_wq, &bus->request_rx);
+ return IRQ_HANDLED;
+}
+
+static void wfx_spi_request_rx(struct work_struct *work)
+{
+}
+
+static size_t wfx_spi_align_size(void *priv, size_t size)
+{
+ // Most of SPI controllers avoid DMA if buffer size is not 32bit aligned
+ return ALIGN(size, 4);
+}
+
+static const struct hwbus_ops wfx_spi_hwbus_ops = {
+ .copy_from_io = wfx_spi_copy_from_io,
+ .copy_to_io = wfx_spi_copy_to_io,
+ .lock = wfx_spi_lock,
+ .unlock = wfx_spi_unlock,
+ .align_size = wfx_spi_align_size,
+};
static int wfx_spi_probe(struct spi_device *func)
{
- return -EIO;
+ struct wfx_spi_priv *bus;
+ int ret;
+
+ if (!func->bits_per_word)
+ func->bits_per_word = 16;
+ ret = spi_setup(func);
+ if (ret)
+ return ret;
+ // Trace below is also displayed by spi_setup() if compiled with DEBUG
+ dev_dbg(&func->dev, "SPI params: CS=%d, mode=%d bits/word=%d speed=%d\n",
+ func->chip_select, func->mode, func->bits_per_word, func->max_speed_hz);
+ if (func->bits_per_word != 16 && func->bits_per_word != 8)
+ dev_warn(&func->dev, "unusual bits/word value: %d\n", func->bits_per_word);
+ if (func->max_speed_hz > 49000000)
+ dev_warn(&func->dev, "%dHz is a very high speed\n", func->max_speed_hz);
+
+ bus = devm_kzalloc(&func->dev, sizeof(*bus), GFP_KERNEL);
+ if (!bus)
+ return -ENOMEM;
+ bus->func = func;
+ if (func->bits_per_word == 8 || IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
+ bus->need_swab = true;
+ spi_set_drvdata(func, bus);
+
+ bus->gpio_reset = wfx_get_gpio(&func->dev, gpio_reset, "reset");
+ if (!bus->gpio_reset) {
+ dev_warn(&func->dev, "try to load firmware anyway\n");
+ } else {
+ gpiod_set_value(bus->gpio_reset, 0);
+ udelay(100);
+ gpiod_set_value(bus->gpio_reset, 1);
+ udelay(2000);
+ }
+
+ ret = devm_request_irq(&func->dev, func->irq, wfx_spi_irq_handler,
+ IRQF_TRIGGER_RISING, "wfx", bus);
+ if (ret)
+ return ret;
+
+ INIT_WORK(&bus->request_rx, wfx_spi_request_rx);
+ bus->core = wfx_init_common(&func->dev, &wfx_spi_pdata,
+ &wfx_spi_hwbus_ops, bus);
+ if (!bus->core)
+ return -EIO;
+
+ return ret;
}
/* Disconnect Function to be called by SPI stack when device is disconnected */
static int wfx_spi_disconnect(struct spi_device *func)
{
+ struct wfx_spi_priv *bus = spi_get_drvdata(func);
+
+ wfx_free_common(bus->core);
+ // A few IRQ will be sent during device release. Hopefully, no IRQ
+ // should happen after wdev/wvif are released.
+ devm_free_irq(&func->dev, func->irq, bus);
+ flush_work(&bus->request_rx);
return 0;
}
diff --git a/drivers/staging/wfx/hwio.h b/drivers/staging/wfx/hwio.h
new file mode 100644
index 000000000000..c490014c1df8
--- /dev/null
+++ b/drivers/staging/wfx/hwio.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Low-level API.
+ *
+ * Copyright (c) 2017-2018, Silicon Laboratories, Inc.
+ * Copyright (c) 2010, ST-Ericsson
+ */
+#ifndef WFX_HWIO_H
+#define WFX_HWIO_H
+
+#define CFG_ERR_SPI_FRAME 0x00000001 // only with SPI
+#define CFG_ERR_SDIO_BUF_MISMATCH 0x00000001 // only with SDIO
+#define CFG_ERR_BUF_UNDERRUN 0x00000002
+#define CFG_ERR_DATA_IN_TOO_LARGE 0x00000004
+#define CFG_ERR_HOST_NO_OUT_QUEUE 0x00000008
+#define CFG_ERR_BUF_OVERRUN 0x00000010
+#define CFG_ERR_DATA_OUT_TOO_LARGE 0x00000020
+#define CFG_ERR_HOST_NO_IN_QUEUE 0x00000040
+#define CFG_ERR_HOST_CRC_MISS 0x00000080 // only with SDIO
+#define CFG_SPI_IGNORE_CS 0x00000080 // only with SPI
+#define CFG_WORD_MODE_MASK 0x00000300 // Bytes ordering (only writable in SPI):
+#define CFG_WORD_MODE0 0x00000000 // B1,B0,B3,B2 (In SPI, register address and CONFIG data always use this mode)
+#define CFG_WORD_MODE1 0x00000100 // B3,B2,B1,B0
+#define CFG_WORD_MODE2 0x00000200 // B0,B1,B2,B3 (SDIO)
+#define CFG_DIRECT_ACCESS_MODE 0x00000400 // Direct or queue access mode
+#define CFG_PREFETCH_AHB 0x00000800
+#define CFG_DISABLE_CPU_CLK 0x00001000
+#define CFG_PREFETCH_SRAM 0x00002000
+#define CFG_CPU_RESET 0x00004000
+#define CFG_SDIO_DISABLE_IRQ 0x00008000 // only with SDIO
+#define CFG_IRQ_ENABLE_DATA 0x00010000
+#define CFG_IRQ_ENABLE_WRDY 0x00020000
+#define CFG_CLK_RISE_EDGE 0x00040000
+#define CFG_SDIO_DISABLE_CRC_CHK 0x00080000 // only with SDIO
+#define CFG_RESERVED 0x00F00000
+#define CFG_DEVICE_ID_MAJOR 0x07000000
+#define CFG_DEVICE_ID_RESERVED 0x78000000
+#define CFG_DEVICE_ID_TYPE 0x80000000
+
+#define CTRL_NEXT_LEN_MASK 0x00000FFF
+#define CTRL_WLAN_WAKEUP 0x00001000
+#define CTRL_WLAN_READY 0x00002000
+
+#define IGPR_RW 0x80000000
+#define IGPR_INDEX 0x7F000000
+#define IGPR_VALUE 0x00FFFFFF
+
+#endif /* WFX_HWIO_H */
diff --git a/drivers/staging/wfx/main.c b/drivers/staging/wfx/main.c
index cd69f955f531..744445ef597c 100644
--- a/drivers/staging/wfx/main.c
+++ b/drivers/staging/wfx/main.c
@@ -11,10 +11,15 @@
* Copyright (c) 2004-2006 Jean-Baptiste Note <jbnote@xxxxxxxxx>, et al.
*/
#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/mmc/sdio_func.h>
#include <linux/spi/spi.h>
#include <linux/etherdevice.h>
+#include "main.h"
+#include "wfx.h"
#include "bus.h"
#include "wfx_version.h"
@@ -23,6 +28,54 @@ MODULE_AUTHOR("Jérôme Pouiller <jerome.pouiller@xxxxxxxxxx>");
MODULE_LICENSE("GPL");
MODULE_VERSION(WFX_LABEL);
+struct gpio_desc *wfx_get_gpio(struct device *dev, int override, const char *label)
+{
+ struct gpio_desc *ret;
+ char label_buf[256];
+
+ if (override >= 0) {
+ snprintf(label_buf, sizeof(label_buf), "wfx_%s", label);
+ ret = ERR_PTR(devm_gpio_request_one(dev, override, GPIOF_OUT_INIT_LOW, label_buf));
+ if (!ret)
+ ret = gpio_to_desc(override);
+ } else if (override == -1) {
+ ret = NULL;
+ } else {
+ ret = devm_gpiod_get(dev, label, GPIOD_OUT_LOW);
+ }
+ if (IS_ERR(ret) || !ret) {
+ if (!ret || PTR_ERR(ret) == -ENOENT)
+ dev_warn(dev, "gpio %s is not defined\n", label);
+ else
+ dev_warn(dev, "error while requesting gpio %s\n", label);
+ ret = NULL;
+ } else {
+ dev_dbg(dev, "using gpio %d for %s\n", desc_to_gpio(ret), label);
+ }
+ return ret;
+}
+
+struct wfx_dev *wfx_init_common(struct device *dev,
+ const struct wfx_platform_data *pdata,
+ const struct hwbus_ops *hwbus_ops,
+ void *hwbus_priv)
+{
+ struct wfx_dev *wdev;
+
+ wdev = devm_kmalloc(dev, sizeof(*wdev), GFP_KERNEL);
+ if (!wdev)
+ return NULL;
+ wdev->dev = dev;
+ wdev->hwbus_ops = hwbus_ops;
+ wdev->hwbus_priv = hwbus_priv;
+ memcpy(&wdev->pdata, pdata, sizeof(*pdata));
+ return wdev;
+}
+
+void wfx_free_common(struct wfx_dev *wdev)
+{
+}
+
static int __init wfx_core_init(void)
{
int ret = 0;
diff --git a/drivers/staging/wfx/main.h b/drivers/staging/wfx/main.h
new file mode 100644
index 000000000000..82222edf998b
--- /dev/null
+++ b/drivers/staging/wfx/main.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Device probe and register.
+ *
+ * Copyright (c) 2017-2019, Silicon Laboratories, Inc.
+ * Copyright (c) 2010, ST-Ericsson
+ * Copyright (c) 2006, Michael Wu <flamingice@xxxxxxxxxxxx>
+ * Copyright 2004-2006 Jean-Baptiste Note <jbnote@xxxxxxxxx>, et al.
+ */
+#ifndef WFX_MAIN_H
+#define WFX_MAIN_H
+
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+
+#include "bus.h"
+
+struct wfx_dev;
+
+struct wfx_platform_data {
+};
+
+struct wfx_dev *wfx_init_common(struct device *dev,
+ const struct wfx_platform_data *pdata,
+ const struct hwbus_ops *hwbus_ops,
+ void *hwbus_priv);
+void wfx_free_common(struct wfx_dev *wdev);
+
+struct gpio_desc *wfx_get_gpio(struct device *dev, int override,
+ const char *label);
+
+#endif
diff --git a/drivers/staging/wfx/wfx.h b/drivers/staging/wfx/wfx.h
new file mode 100644
index 000000000000..9716acc981df
--- /dev/null
+++ b/drivers/staging/wfx/wfx.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Common private data for Silicon Labs WFx chips.
+ *
+ * Copyright (c) 2017-2019, Silicon Laboratories, Inc.
+ * Copyright (c) 2010, ST-Ericsson
+ * Copyright (c) 2006, Michael Wu <flamingice@xxxxxxxxxxxx>
+ * Copyright 2004-2006 Jean-Baptiste Note <jbnote@xxxxxxxxx>, et al.
+ */
+#ifndef WFX_H
+#define WFX_H
+
+#include "main.h"
+
+struct hwbus_ops;
+
+struct wfx_dev {
+ struct wfx_platform_data pdata;
+ struct device *dev;
+ const struct hwbus_ops *hwbus_ops;
+ void *hwbus_priv;
+};
+
+#endif /* WFX_H */
--
2.20.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
