Ah it looks like the spaces after Description: need to be converted into tabs. Thanks, Okash On Tue, Sep 17, 2019 at 10:35 PM Okash Khawaja <okash.khawaja@xxxxxxxxx> wrote: > > Hi Greg, > > You're right, I got none of those emails. Thanks. Is it all taken care of? > > Best regards, > Okash > > On Tue, Sep 17, 2019 at 4:56 AM Gregory Nowak <greg@xxxxxxxxx> wrote: > > > > Hi Okash, > > I just realized the below didn't go to you directly along with the > > other addresses. > > > > Greg > > > > > > ----- Forwarded message from Gregory Nowak <greg@xxxxxxxxx> ----- > > > > Date: Mon, 16 Sep 2019 15:38:48 -0700 > > From: Gregory Nowak <greg@xxxxxxxxx> > > To: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> > > Cc: devel@xxxxxxxxxxxxxxxxxxxx, Simon Dickson <simonhdickson@xxxxxxxxx>, > > "Speakup is a screen review system for Linux." > > <speakup@xxxxxxxxxxxxxxxxx>, linux-kernel@xxxxxxxxxxxxxxx, John Covici > > <covici@xxxxxxxxxxxxxx> > > Subject: Re: [HELP REQUESTED from the community] Was: Staging status of speakup > > > > On Mon, Sep 16, 2019 at 04:11:00PM +0200, Greg Kroah-Hartman wrote: > > > On Mon, Sep 16, 2019 at 03:47:28PM +0200, Samuel Thibault wrote: > > > > Okash Khawaja, le dim. 15 sept. 2019 19:41:30 +0100, a ecrit: > > > > > I have attached the descriptions. > > > > > > > > Attachment is missing :) > > > > > > I saw it :) > > > > > > Anyway, please put the Description: lines without a blank after that, > > > with the description text starting on that same line. > > > > > > thanks! > > > > > > greg k-h > > > > It's attached. Hope the indentation is OK. > > > > Greg > > > > > > -- > > web site: http://www.gregn.net > > gpg public key: http://www.gregn.net/pubkey.asc > > skype: gregn1 > > (authorization required, add me to your contacts list first) > > If we haven't been in touch before, e-mail me before adding me to your contacts. > > > > -- > > Free domains: http://www.eu.org/ or mail dns-manager@xxxxxx > > > > What: /sys/accessibility/speakup/attrib_bleep > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: Beeps the PC speaker when there is an attribute change such as > > foreground or background color when using speakup review > > commands. One = on, zero = off. > > What: /sys/accessibility/speakup/bell_pos > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: This works much like a typewriter bell. If for example 72 is > > echoed to bell_pos, it will beep the PC speaker when typing on > > a line past character 72. > > What: /sys/accessibility/speakup/bleeps > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: This controls whether one hears beeps through the PC speaker > > when using speakup's review commands. > > TODO: what values does it accept? > > What: /sys/accessibility/speakup/bleep_time > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: This controls the duration of the PC speaker beeps speakup > > produces. > > TODO: What are the units? Jiffies? > > What: /sys/accessibility/speakup/cursor_time > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: This controls cursor delay when using arrow keys. When a > > connection is very slow, with the default setting, when moving > > with the arrows, or backspacing etc. speakup says the incorrect > > characters. Set this to a higher value to adjust for the delay > > and better synchronisation between cursor position and speech. > > What: /sys/accessibility/speakup/delimiters > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: Delimit a word from speakup. > > TODO: add more info > > What: /sys/accessibility/speakup/ex_num > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: TODO: > > What: /sys/accessibility/speakup/key_echo > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: Controls if speakup speaks keys when they are typed. One = on, > > zero = off or don't echo keys. > > What: /sys/accessibility/speakup/keymap > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: Speakup keymap remaps keys to Speakup functins. It uses a binary > > format. A special program called genmap is needed to compile a > > textual keymap into the binary format which is then loaded into > > /sys/accessibility/speakup/keymap. > > What: /sys/accessibility/speakup/no_interrupt > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: Controls if typing interrupts output from speakup. With > > no_interrupt set to zero, typing on the keyboard will interrupt > > speakup if for example the say screen command is used before the > > entire screen is read. With no_interrupt set to one, if the say > > screen command is used, and one then types on the keyboard, > > speakup will continue to say the whole screen regardless until > > it finishes. > > What: /sys/accessibility/speakup/punc_all > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: This is a list of all the punctuation speakup should speak when > > punc_level is set to four. > > What: /sys/accessibility/speakup/punc_level > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: Controls the level of punctuation spoken as the screen is > > displayed, not reviewed. Levels range from zero no punctuation, > > to four, all punctuation. One corresponds to punc_some, two > > corresponds to punc_most, and three as well as four both > > correspond to punc_all. Some hardware synthesizers may have > > different levels each corresponding to three and four for > > punc_level. Also note that if punc_level is set to zero, and > > key_echo is set to one, typed punctuation is still spoken as it > > is typed. > > What: /sys/accessibility/speakup/punc_most > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: This is a list of all the punctuation speakup should speak when > > punc_level is set to two. > > What: /sys/accessibility/speakup/punc_some > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: This is a list of all the punctuation speakup should speak when > > punc_level is set to one. > > What: /sys/accessibility/speakup/reading_punc > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: Almost the same as punc_level, the differences being that > > reading_punc controls the level of punctuation when reviewing > > the screen with speakup's screen review commands. The other > > difference is that reading_punc set to three speaks punc_all, > > and reading_punc set to four speaks all punctuation, including > > spaces. > > What: /sys/accessibility/speakup/repeats > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: A list of characters speakup repeats. Normally, when there are > > more than three characters in a row, speakup just reads three of > > those characters. For example, "......" would be read as dot, > > dot, dot. If a . is added to the list of characters in repeats, > > "......" would be read as dot, dot, dot, times six. > > What: /sys/accessibility/speakup/say_control > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: If set to one, speakup speaks shift, alt and control when those > > keys are pressed. If say_control is set to zero, shift, ctrl, > > and alt are not spoken when they are pressed. > > What: /sys/accessibility/speakup/say_word_ctl > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: TODO: > > What: /sys/accessibility/speakup/silent > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: TODO: > > What: /sys/accessibility/speakup/spell_delay > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: This controls how fast a word is spelled when speakup's say word > > review command is pressed twice quickly to speak the current > > word being reviewed. Zero just speaks the letters one after > > another, while values one through four seem to introduce more of > > a pause between the spelling of each letter by speakup. > > What: /sys/accessibility/speakup/synth > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: Gets or sets the synthesizer driver currently in use. Reading > > synth returns the synthesizer driver currently in use. Writing > > synth switches to the given synthesizer driver, provided it is > > either built into the kernel, or already loaded as a module. > > What: /sys/accessibility/speakup/synth_direct > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: Sends whatever is written to synth_direct > > directly to the speech synthesizer in use, bypassing speakup. > > This could be used to make the synthesizer speak a string, or to > > send control sequences to the synthesizer to change how the > > synthesizer behaves. > > What: /sys/accessibility/speakup/version > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: Reading version returns the version of speakup, and the version > > of the synthesizer driver currently in use. > > What: /sys/accessibility/speakup/i18n/announcements > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: This file contains various general announcements, most of which > > cannot be categorized. You will find messages such as "You > > killed Speakup", "I'm alive", "leaving help", "parked", > > "unparked", and others. You will also find the names of the > > screen edges and cursor tracking modes here. > > What: /sys/accessibility/speakup/i18n/chartab > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: TODO > > What: /sys/accessibility/speakup/i18n/ctl_keys > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: Here, you will find names of control keys. These are used with > > Speakup's say_control feature. > > What: /sys/accessibility/speakup/i18n/function_names > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: Here, you will find a list of names for Speakup functions. > > These are used by the help system. For example, suppose that > > you have activated help mode, and you pressed keypad 3. Speakup > > says: "keypad 3 is character, say next." > > The message "character, say next" names a Speakup function, and > > it comes from this function_names file. > > What: /sys/accessibility/speakup/i18n/states > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: This file contains names for key states. > > Again, these are part of the help system. For instance, if you > > had pressed speakup + keypad 3, you would hear: > > "speakup keypad 3 is go to bottom edge." > > The speakup key is depressed, so the name of the key state is > > speakup. > > This part of the message comes from the states collection. > > What: /sys/accessibility/speakup/i18n/characters > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: Through this sys entry, Speakup gives you the ability to change > > how Speakup pronounces a given character. You could, for > > example, change how some punctuation characters are spoken. You > > can even change how Speakup will pronounce certain letters. For > > further details see '12. Changing the Pronunciation of > > Characters' in Speakup User's Guide (file spkguide.txt in > > source). > > What: /sys/accessibility/speakup/i18n/colors > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: When you use the "say attributes" function, Speakup says the > > name of the foreground and background colors. These names come > > from the i18n/colors file. > > What: /sys/accessibility/speakup/i18n/formatted > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: This group of messages contains embedded formatting codes, to > > specify the type and width of displayed data. If you change > > these, you must preserve all of the formatting codes, and they > > must appear in the order used by the default messages. > > What: /sys/accessibility/speakup/i18n/key_names > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: Again, key_names is used by Speakup's help system. In the > > previous example, Speakup said that you pressed "keypad 3." > > This name came from the key_names file. > > What: /sys/accessibility/speakup/<synth-name>/ > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: In `/sys/accessibility/speakup` is a directory corresponding to > > the synthesizer driver currently in use (E.G) `soft` for the > > soft driver. This directory contains files which control the > > speech synthesizer itself, as opposed to controlling the speakup > > screen reader. The parameters in this directory have the same > > names and functions across all supported synthesizers. The range > > of values for freq, pitch, rate, and vol is the same for all > > supported synthesizers, with the given range being internally > > mapped by the driver to more or less fit the range of values > > supported for a given parameter by the individual synthesizer. > > Below is a description of values and parameters for soft > > synthesizer, which is currently the most commonly used. > > What: /sys/accessibility/speakup/soft/caps_start > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: This is the string that is sent to the synthesizer to cause it > > to start speaking uppercase letters. For the soft synthesizer > > and most others, this causes the pitch of the voice to rise > > above the currently set pitch. > > What: /sys/accessibility/speakup/soft/caps_stop > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: This is the string sent to the synthesizer to cause it to stop > > speaking uppercase letters. In the case of the soft synthesizer > > and most others, this returns the pitch of the voice down to the > > currently set pitch. > > What: /sys/accessibility/speakup/soft/delay_time > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: TODO: > > What: /sys/accessibility/speakup/soft/direct > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: Controls if punctuation is spoken by speakup, or by the > > synthesizer. For example, speakup speaks ">" as "greater", while > > the espeak synthesizer used by the soft driver speaks "greater > > than". Zero lets speakup speak the punctuation. One lets the > > synthesizer itself speak punctuation. > > What: /sys/accessibility/speakup/soft/freq > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: Gets or sets the frequency of the speech synthesizer. Range is > > 0-9. > > What: /sys/accessibility/speakup/soft/full_time > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: TODO: > > What: /sys/accessibility/speakup/soft/jiffy_delta > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: This controls how many jiffys the kernel gives to the > > synthesizer. Setting this too high can make a system unstable, > > or even crash it. > > What: /sys/accessibility/speakup/soft/pitch > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: Gets or sets the pitch of the synthesizer. The range is 0-9. > > What: /sys/accessibility/speakup/soft/punct > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: Gets or sets the amount of punctuation spoken by the > > synthesizer. The range for the soft driver seems to be 0-2. > > TODO: How is this related to speakup's punc_level, or > > reading_punc. > > What: /sys/accessibility/speakup/soft/rate > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: Gets or sets the rate of the synthesizer. Range is from zero > > slowest, to nine fastest. > > What: /sys/accessibility/speakup/soft/tone > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: Gets or sets the tone of the speech synthesizer. The range for > > the soft driver seems to be 0-2. This seems to make no > > difference if using espeak and the espeakup connector. > > TODO: does espeakup support different tonalities? > > What: /sys/accessibility/speakup/soft/trigger_time > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: TODO: > > What: /sys/accessibility/speakup/soft/voice > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: Gets or sets the voice used by the synthesizer if the > > synthesizer can speak in more than one voice. The range for the > > soft driver is 0-7. Note that while espeak supports multiple > > voices, this parameter will not set the voice when the espeakup > > connector is used between speakup and espeak. > > What: /sys/accessibility/speakup/soft/vol > > KernelVersion: 2.6 > > Contact: speakup@xxxxxxxxxxxxxxxxx > > Description: Gets or sets the volume of the speech synthesizer. Range is 0-9, > > with zero being the softest, and nine being the loudest. > > > > _______________________________________________ > > Speakup mailing list > > Speakup@xxxxxxxxxxxxxxxxx > > http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup > > > > > > ----- End forwarded message ----- > > > > -- > > web site: http://www.gregn.net > > gpg public key: http://www.gregn.net/pubkey.asc > > skype: gregn1 > > (authorization required, add me to your contacts list first) > > If we haven't been in touch before, e-mail me before adding me to your contacts. > > > > -- > > Free domains: http://www.eu.org/ or mail dns-manager@xxxxxx _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
